一种新的两道工序柔性流水车间排序问题

本文针对F_2(p),h11.1|m_1=1,m_2=μ≥2|C_(max)这一问题给出了几种近似算法,并对每种近似算法进行了最坏情形分析,给出了最坏情形界.     

具有机器适用限制的分布式置换流水车间问题的模型与算法

考虑具有机器适用限制的多个不同置换流水车间的调度问题. 机器适用限制指的是每个工件只能分配到其可加工工厂集合. 所有置换流水车间拥有的机器数相同但是具有不同的加工能力. 首先, 针对该问题建立了基于位置的混合整数线性规划模型; 进而, 对一般情况和三种特殊情况给出了具有较小近似比的多项式时间算法. 其次, 基于NEH方法提出了启发式算法NEHg, 并给出了以NEHg为上界的分支定界算法. 最后, 通过例子说明了NEHg启发式算法和分支定界算法的计算过程, 并进行大量的实验将NEHg与NEH算法结果进行比较, 从而验证了NEHg算法的有效性.     

改进的布谷鸟算法求解考虑运输时间的分布式柔性流水车间调度问题

针对分布式制造环境下多车间调度问题特点,结合企业实际生产情况,考虑相邻工序间的运输时间,建立以最小化最大完工时间为优化目标的分布式柔性流水车间调度模型,提出一种改进布谷鸟算法用于求解该模型。算法改进包括设计了一种基于工序、车间和机器的三层编码方案;根据问题特点设计了混合种群初始化策略以提高种群质量;改进了布谷鸟搜索操作使其适用于求解该模型;设计了一种种群进化策略以提高算法收敛速度及解的质量。最后通过仿真实验,与多种算法对比,验证所提算法的有效性和优越性。     

机器带不可用时间限制的简单线性恶化供应链排序问题

研究的单机供应链排序问题中, 机器有一个不可用时间限制, 工件的加工时间与恶化率及其开工时间有关, 且工件的加工不可恢复. 一个或多个完工工件可组成一个发送批由车辆发送给客户, 且在机器不可用时间限制之前完工的工件必须在限制开始之时或之前完成发送. 问题的目标是最小化总发送时间与总发送费用之和. 证明问题是NP-难的, 提出了伪多项式时间的动态规划算法. 进一步, 在确定问题目标函数值的上界及下界之后, 设计了一个完全多项式时间近似方案(FPTAS).     

一类带机器准备时间的排序复杂性及算法

1引言文[2-4]中考虑了如下定义的一个排序模型：m台同型机器加工n个工件，每个工件在零时刻到达，第i个工件需加工时间pi,而各机器有各自的准备时间Tj≥0,怎样安排工件加工顺序，使机器总完工时间（makespan）尽可能早．这是一个强NP-完全问题．本文考虑增加这样一个约束，即每     

流水车间作业排序问题蚁群算法研究

本文运用蚁群算法研究辨台处理机、目标函数为时间表长最小的同顺序排列流水车间作业排序问题，设计出解决该问题的算法步骤与流程。最后，通过仿真比较该算法与解决该问题的其它启发式算法性能，计算效果比较满意。     

一个具有退化的两个代理的排序问题

考虑两个代理的带有退化的单机排序问题.第一个代理J以完工时间和为目标函数,第二个代理J以最大延迟为目标函数,并且两个代理的加工时间是按时间退化的,所谓按时间退化就是每个工件的加工时间是其开始加工时间的函数.问题的目标是寻找一种排序,使得两个代理的目标函数之和达到最小.证明该问题可在O(n_1n_2(n_1+n_2))时间内求解.     

含不相关机的动态可重入柔性流水车间问题的混合DABC-GA算法

为了改善生产线的物流平衡和加强阶段间的时间衔接,扩展一般可重入柔性流水车间调度理论,以最小化总加权完工时间为目标,研究了每阶段含不相关并行机的动态可重入柔性流水车间问题,工件在各阶段的加工时间取决于加工它的机器。鉴于所研究问题为NP-hard问题,首先,建立整数规划模型;其次,设计元胞矩阵编码方案,提出融合离散人工蜂群算法和遗传算法的一种混合算法以获得问题的近优解;最后,为了评估混合算法的性能,将所提出算法和一些元启发式算法进行了不同规模问题的对比测试,实验结果说明了所提算法的有效性。     

一个具有两类工件的多目标排序的多项式时间算法

本文考虑具有两个工件集的单机排序问题.第一个工件集J1以完工时间和为目标函数,第二个工件集J2以最大加权完工时间为目标函数.问题的目标是寻找一种排序,使得两个目标函数的加权和达到最小.本文证明该问题可在O(n1n2(n1 n2))时间内求解.     

机器具有准备时间的双目标平行机排序问题

本文讨论机器具有准备时间的双目标平行机排序问题，目标函数为完工时间和最优条件下极小化最大完工时间．通过对SPT排序的性质的分析，给出了最优排序的下界．在此基础上证明了SPT排序的误差界为3／2，并且是紧界．     

Two-Stage Flowshop Scheduling Problem with Bicriteria

The two-stage flowshop scheduling problem with the objective of minimizing total flowtime subject to obtaining the optimal makespan is discussed. A branch-and-bound algorithm and two heuristic algorithms have been developed. The results of the experimental investigation of the effectiveness of the algorithms are also presented.     

The Two-stage Assembly Flow Shop Scheduling with an Availability Constraint: Worst Case Analysis

In this paper, we are interested in handling the limited availability of machines in the two-stage assembly flow shop scheduling problems. Emphasis is put on the semiresumable case with respect to the minimization of the makespan. We provide, when possible, heuristics with a tight worst-case ratio bound of 2.     

Two-Machine Flowshop Batching and Scheduling

We consider in this paper a two-machine flowshop scheduling problem in which the first machine processes jobs individually while the second machine processes jobs in batches. The forming of each batch on the second machine incurs a constant setup time. The objective is to minimize the makespan. This problem was previously shown to be NP-hard in the ordinary sense. In this paper, we first present a strong NP-hardness result of the problem. We also identify a polynomially solvable case with either anticipatory or non-anticipatory setups. We then establish a property that an optimal solution for the special case is a lower bound for the general problem. To obtain near-optimal solutions for the general problem, we devise some heuristics. The lower bound is used to evaluate the quality of the heuristic solutions. Results of computational experiments reveal that the heuristics produce solutions with small error ratios. They also suggest that the lower bound is close to the optimal solution.     

单机供应链排序及流水作业的反问题模型

最优化问题是在给定参数情况下,对某个目标函数,如费用、容量等,寻找问题的最优解.然而在许多现实生活中,有时只能知道问题的参数近似值和一个可行解,需要最小程度地调整参数,使得给定的可行解成为最优,这就是最优化问题的反问题.本文研究单台机器供应链排序和流水作业排序的反问题.根据调整参数的不同,本文利用排序理论把这些反问题表示为相应的数学规划形式.     

A Flexible On-line Scheduling Algorithm for Batch Machine with Infinite Capacity

We study on-line scheduling on a batch machine with infinite capacity. We present a flexible on-line scheduling algorithm that aims at minimizing the makespan and achieves the optimal competitive ratio of . This research is substantially supported by a grant from City University of Hong Kong (Grant No. 7001119). The second author is supported by this grant and by the Natural Science Foundation of China.     

Two-Stage,Hybrid Flowshop Scheduling Problem

This paper describes the two-stage flowshop problem when there are identical multiple machines at each stage, and shows that the problem is NP-complete. An efficient heuristic algorithm is developed for finding an approximate solution of a special case when there is only one machine at stage 2. The effectiveness of the proposed heuristic algorithm in finding a minimum makespan schedule is empirically evaluated and found to increase with the increase in the number of jobs.     

工件带到达时间的两阶段柔性流水作业的近似算法

研究了工件带到时间的两阶段柔性流水作业的排序问题,基于求解流水作业和平行机问题的算法思想,提出两个相应的近似算法H(R)和H(MR(?)),证明了这两个算法的最坏情况性能比分别为3-1/m和2/5-1/m,讨论了界的紧性,并利用数值模拟以分析算法与最优值的近似性能比.     

Scheduling of a Two-machine Flowshop with Travel Time Between Machines

We consider the classical two-machine flowshop sequencing problem with the following additional constraint. When a job is completed on the first machine it must be transported to the second machine; a single transporter is available. A completed job on the first machine will block the machine if the transporter is in transit. A constructive algorithm to minimize makespan is presented in the paper.     

Average Cost Optimality for an Unreliable Two-Machine Flowshop with Limited Internal Buffer

We consider a production planning problem in a two-machine flowshop subject to breakdown and repair of machines and subject to nonnegativity and upper bound constraints on work-in-process. The objective is to choose machine production rates over time to minimize the long-run average inventory/backlog and production costs. For sufficiently large upper bound on the work-in-process, the problem is formulated as a stochastic dynamic program. We then establish a verification theorem and a partial characterization of the optimal control policy if it exists.