纳米金淀积的多孔硅靶增强样品的激光解吸/电离质谱信号

硅片类型和多孔硅结构的多样性影响了多孔硅表面的激光解吸/离子化质谱(DIOS)(无辅助基质的激光解吸/电离飞行时间质谱(LDI-TOF-MS))数据的重复性和靶的耐储时间。本工作通过在多孔硅的表面淀积金纳米颗粒并将其作为目标靶来增强软物质分子如聚乙二醇和多肽的激光解吸/电离质谱信号。纳米金的淀积钝化了多孔硅表面的Si-H活性基团,增加了靶的耐储时间。用场发射扫描电镜表征了多孔硅淀积金纳米颗粒前后的形貌,用X射线能量色散光谱法分析金的百分含量,结果表明其含量随沉积时间的延长而增加。激光解吸/电离质谱信号的增强可能是由多孔硅及其支持的金纳米颗粒的光学和物理性质引起的,该类型的样品靶在激光解吸/电离飞行时间质谱的应用上结合了多孔硅和金纳米颗粒的双重优势。     

基于纳米材料的表面辅助激光解吸离子化质谱研究

基质辅助激光解吸离子化质谱(MALDI-MS)作为一种常规的分析表征方法主要用于生物大分子的分析,如蛋白质、多肽、多糖及核酸等.然而,MALDI-MS中使用的有机小分子基质在低分子量区会产生背景干扰,很难分析小分子量化合物(m/z < 700).最近,基于纳米材料的免有机基质的激光解吸离子化质谱(又称为表面辅助激光解吸离子化质谱,SALDI-MS)有效解决了上述问题.SALDI-MS分析中使用的起到能量转移作用的纳米材料在低分子量区间不会产生背景干扰峰,可以将分析对象由大分子扩展到小分子.另外,SALDI-MS还具有许多其他优点,如样品制备简单、信噪比高、耐盐性好、基底表面信号重复性好及可实现样品的定量分析等,显示了较好的应用前景.本文综述了研究较多的四大类纳米材料在SALDI-MS分析、检测及成像方面的应用,包括碳纳米材料(富勒烯、碳纳米管、石墨烯及氧化石墨烯)、硅纳米材料(多孔硅、硅纳米纤维、硅纳米粒子)、其他材料纳米粒子(包括金属纳米粒子、金属氧化物纳米粒子、无机盐纳米粒子及量子点等)及纳米杂化多孔材料,详细介绍了最近的一些研究进展;并讨论了纳米材料在SALDI-MS应用中的能量转移机理.最后,讨论了该领域未来的研究内容和方向以及亟待研究的重要问题.     

表面解吸常压化学电离源的研制及应用

根据表面解吸常压化学电离源(SDAPCI)对表面痕量待测物进行常压解吸化学电离的原理,自行研制了SDAPCI电离源及其与线性离子阱(LTQ)质谱仪的接口,成功地在LTQ上实现了表面解吸常压化学电离。此方法无需样品预处理,直接利用电晕放电产生的H3O 在常压下对待测样品进行表面解吸化学电离,避免了甲醇等有毒试剂的使用。在优化的仪器参数条件下,分别用正/负离子模式成功地检测了片剂药品中的氯雷他定、乙酰氨基酚等活性成分和其它不同表面上TNT、氨基酸和多肽等物质,对这些常见物质的检出限不高于10pg/cm2。采用氩气作为电离试剂,观测到乙酰氨基酚、多肽等物质形成的自由基阳离子,提出了在氩气氛围中获得自由基阳离子的可能机理。实验表明SDAPCI具有灵敏度较高,选择性好,适用范围宽等特点,适合用于药品、食品等非破坏、无污染检测以及对复杂基体物质进行快速现场分析。     

以纳米材料为基质的激光解吸离子化质谱成像研究进展

基质辅助激光解吸离子化质谱(MALDI-MS)作为一种常规的软电离分析表征方法,被广泛应用于多肽、蛋白质、核酸等生物大分子的分析。近些年,基于纳米粒子和纳米结构表面的MALDI-MS成像技术(MALDI-MSI)凭借其样品制备简单、不需标记、高通量等优点,在组织结构研究、药物代谢、刑事侦查等领域表现出良好的应用前景。本文总结了MALDI-MSI纳米基质材料的研究进展,并对其发展及应用进行了展望。     

MIL-101 (Cr)-表面辅助激光解吸电离-质谱法快速检测血样中的芦丁

本文采用金属有机骨架(Metal Organic Frameworks,MOFs)化合物MIL-101(Cr)作为基质辅助激光解吸电离(MALDI)的基质,将其与传统基质进行对比分析黄酮类小分子化合物,可以实现对黄酮类药物小分子的无背景干扰检测,并据此建立了快速检测芦丁的MIL-101 (Cr)-表面辅助激光解吸电离-...     

改善液体辅助表面解吸常压化学电离质谱成像空间分辨率的研究

液体辅助表面解吸常压化学电离源(LA-DAPCI)通过电晕放电产生的初级离子和高密度带电液滴,能够对样品表面的中性待测物进行解吸电离,该离子源具有较高的离子化效率,适合复杂基体样品的质谱成像研究.为了满足质谱成像对空间分辨率的要求,本实验通过优化离子源结构、萃取剂组成、萃取剂流量、载气流速、离子源的几何位置参数等实验条件,有效提高了LA-DAPCI源的空间分辨率(从(441±14) μm提高到(58±7)μm).应用LA-DAPCI-MS/MS方法对罗丹明6G进行测定,检测限为0.01 ng/cm2,实验结果令人满意,为其应用于复杂基体样品的质谱成像研究提供科学依据.     

以2, 4, 6-三羟基苯乙酮为基体使用基体辅助激光解吸/电离质 谱法测定核酸分 子的研究

报道以2,4,6-三羟基苯乙酮(2,4,6-THAP)为基体用基体辅助激光解吸/电离飞行时间质谱法(MALDI-TOF-MS)测定核酸分子的研究。2,4,6-THAP解吸和电离DNA分子的效率很高,测定DNA分子d(T)~1~0的[M-H]^-分辨率可达1130.0,信噪比为366.0,检出限达5×10^-^1^4mol,可以测定相对分子质量高达14800以上混合碱基组成的DNA分子。为提高基体对样品解吸/电离效率,对纯化DNA样品的方法进行了讨论。     

分子自组装法制备具有可控浸润性的铜表面

通过简单浸泡的方法在铜基底上制备出了具有微纳米复合结构的氧化铜, 再利用混合硫醇溶液[含HS(CH₂)₉CH₃和 HS(CH₂)₁₁OH]对浸泡后的表面进行修饰, 通过控制溶液中HS(CH₂)₁₁OH的浓度, 制备出一系列具有不同浸润性的铜表面, 实现表面从超疏水到超亲水的有效调控. 研究发现, 表面浸润的可控性源于表面复合结构与不同化学组成的协同作用, 微纳米复合结构的存在为表面浸润性的调节提供了必要的条件.     

C60表面多支化修饰聚合物的制备及其薄膜的初步研究

通过C₆₀与对甲氧基氯甲基苯在溴化钠存在下的自由基反应制备多取代的含末端羟基的C₆₀衍生物,使其与2,2-二羟甲基丙酸多步缩合反应制备C₆₀表面多支化修饰聚合物.利用凝胶渗透色谱、红外光谱、基质辅助激光解吸电离化飞行时间质谱和高分辨透射电子显微镜分析表征产物.考察了其利用LB技术成膜的可能性,并用原子力显微镜对其多层薄膜进行了初步研究.     

采用红外漫反射光谱研究纳米Si3N4的表面结构

采用付利叶红外漫反射光谱对激光法制取的具有不同化学组成的纳米Ｓｉ３Ｎ４粉（１５４－３０ｎｍ）的表面结构，室表面氧化及热稳定性进行了研究，结果表明新鲜的富氮粉体表面主要为硅胺基（Ｓｉ３－ｘＮＨｘ，ｘ＝１－３）结构，粉体暴露空气后硅胺基会与空气中的水分子反应形成硅醇基（ＳｉＯＨ）结构，具有不同组成的粉体随粉中氮含量的增大粒子表面硅胺基量也增加；富硅粉体表面硅胺基较少，其氧化主要为表面硅原子与空气中氧原     

Matrix-free infrared soft laser desorption/ionization

Infrared soft laser desorption/ionization was performed using a 2.94 µm Er : YAG laser and a commercial reflectron time-of-flight mass spectrometer. The instrument was modified so that a 337 nm nitrogen laser could be used concurrently with the IR laser to interrogate samples. Matrix-assisted laser desorption/ionization (MALDI), laser desorption/ionization and desorption/ionization on silicon with UV and IR lasers were compared. Various target materials were tested for IR soft desorption ionization, including stainless steel, aluminum, copper, silicon, porous silicon and polyethylene. Silicon surfaces gave the best performance in terms of signal level and low-mass interference. The internal energy resultant of the desorption/ionization was assessed using the easily fragmented vitamin B₁₂ molecule. IR ionization produced more analyte fragmentation than UV-MALDI analysis. Fragmentation from matrix-free IR desorption from silicon was comparable to that from IR-MALDI. The results are interpreted as soft laser desorption and ionization resulting from the absorption of the IR laser energy by the analyte and associated solvent molecules. Copyright © 2004 John Wiley & Sons, Ltd.     

The use of desorption/ionization on porous silicon mass spectrometry for the detection of negative ions for fatty acids

The study of low molecular weight compounds by matrix-assisted laser desorption/ionization (MALDI) is difficult because of the presence of ions originating from the matrix in the low-m/z range. In order to resolve these problems, new matrix-free approaches were developed based on laser desorption/ionization from the surface of various materials such as graphite and porous silicon. Our work involves the use of 'desorption ionization on porous silicon mass spectrometry' (DIOS-MS) in the negative ion mode to study fatty acid compounds. The potential of the DIOS-MS technique is shown and an insight into the ionization mechanism provided.     

High surface area of porous silicon drives desorption of intact molecules

The surface structure of porous silicon used in desorption/ionization on porous silicon (DIOS) mass analysis is known to play a primary role in the desorption/ionization (D/I) process. In this study, mass spectrometry and scanning electron microscopy (SEM) are used to examine the correlation between intact ion generation with surface ablation and surface morphology. The DIOS process is found to be highly laser energy dependent and correlates directly with the appearance of surface ions (Si(n)(+) and OSiH(+)). A threshold laser energy for DIOS is observed (10 mJ/cm(2)), which supports that DIOS is driven by surface restructuring and is not a strictly thermal process. In addition, three DIOS regimes are observed that correspond to surface restructuring and melting. These results suggest that higher surface area silicon substrates may enhance DIOS performance. A recent example that fits into this mechanism is the surface of silicon nanowires, which has a high surface energy and concomitantly requires lower laser energy for analyte desorption.     

Analysis of deprotonated acids with silicon nanoparticle-assisted laser desorption/ ionization mass spectrometry

Chemically modified silicon nanoparticles were applied for the laser desorption/negative ionization of small acids. A series of substituted sulfonic acids and fatty acids was studied. Compared to desorption ionization on porous silicon (DIOS) and other matrix-less laser desorption/ionization techniques, silicon nanoparticle-assisted laser desorption/ionization (SPALDI) mass spectrometry allows for the analysis of acids in the negative ion mode without the observation of multimers or cation adducts. Using SPALDI, detection limits of many acids reached levels down to 50 pmol/μl. SPALDI of fatty acids with unmodified silicon nanoparticles was compared to SPALDI using the fluoroalkyl silylated silicon powder, with the unmodified particles showing better sensitivity for fatty acids, but with more low-mass background due to impurities and surfactants in the untreated silicon powder. The fatty acids exhibited a size-dependent response in both SPALDI and unmodified SPALDI, showing a signal intensity increase with the chain length of the fatty acids (C12-C18), leveling off at chain lengths of C18-C22. The size effect may be due to the crystallization of long chain fatty acids on the silicon. This hypothesis was further explored and supported by SPALDI of several, similar sized, unsaturated fatty acids with various crystallinities. Fatty acids in milk lipids and tick nymph samples were directly detected and their concentration ratios were determined by SPALDI mass spectrometry without complicated and time-consuming purification and esterification required in the traditional analysis of fatty acids by gas chromatography (GC). These results suggest that SPALDI mass spectrometry has the potential application in fast screening for small acids in crude samples with minimal sample preparation.     

Internal energy transfer in laser desorption/ionization from silicon nanowires

Laser-induced desorption/ionization from silicon nanowires (SiNW) is an emerging method for mass spectrometry of small to medium-size molecules. In this new technique, we examined the internal energy transfer to seven benzylpyridinium thermometer ions and extracted the corresponding internal energy distributions. To explore the effect of the energy-deposition rate on the internal energy transfer, two lasers with significantly different pulse lengths (4 ns vs 22 ps) were utilized as excitation sources. A comparison of ion yields indicated that the SiNW substrates required 5-8 times less laser fluence for ion production than either matrix-assisted laser desorption/ionization (MALDI) or desorption/ionization on silicon (DIOS). In contrast however, the survival yield (SY) values showed that the internal energy transferred to the thermometer ions was more than (ps laser) or comparable to (ns laser) MALDI but it was significantly less than in DIOS. The internal energy transfer was only slightly dependent on laser fluence and on wire density. These effects were rationalized in terms of the confinement of thermal energy in the nanowires and of unimpeded three-dimensional plume expansion. Unlike in MALDI from CHCA and in perfluorophenyl-derivatized DIOS, for desorption from SiNWs the effect of laser pulse length on the internal energy transfer was found to be negligible.     

Visible-laser desorption/ionization on gold nanostructures

In this report, we describe the visible-laser desorption/ionization of biomolecules deposited on gold-coated porous silicon and gold nanorod arrays. The porous silicon made by electrochemical etching was coated with gold using argon ion sputtering. The gold nanorod arrays were fabricated by electrodepositing gold onto a porous alumina template, and the subsequent partial removal of the alumina template. A frequency-doubled/tripled Nd : YAG laser was used to irradiate the gold nanostructured substrate, and the desorbed molecular ions were mass-analyzed by a time-of-flight mass spectrometer. The desorption/ionization of biomolecules for both substrates was favored by the use of the 532-nm visible-laser, which is in the range of the localized surface plasmon resonance of the gold nanostructure. The present technique offers a potential analytical method for low-molecular-weight analytes that are rather difficult to handle in the conventional matrix-assisted laser desorption/ionization (MALDI) mass spectrometry.     

Reduction of organic dyes in matrix-assisted laser desorption/ionization and desorption/ionization on porous silicon

Reduction of analytes in matrix-assisted laser desorption/ionization (MALDI) often obscures the actual determination of molecular structure. To address the redox reactions in laser desorption/ionization processes, the organic dyes Methylene Blue, Janus Green B, Crystal Violet and Rhodamine B were analyzed by MALDI or by desorption/ionization on porous silicon (DIOS). Susceptibility to reduction in MALDI was dependent on both the reduction potentials of analytes and the molar ratio of analyte to matrix molecules. Addition of Cu(II) ions as an electron scavenger suppressed the reduction of Methylene Blue in MALDI. The results suggested that electron transfer to analytes from the sample target and/or from the matrix contributed to the reduction. In DIOS, the reductions of organic dyes were more prominent than in MALDI, and were not prevented by Cu(II) ion doping, probably due to direct contact of the analytes with silicon which had little electric resistance.     

The role of physical and chemical properties of Pd nanostructured materials immobilized on inorganic carriers on ion formation in atmospheric pressure laser desorption/ionization mass spectrometry

Fundamental parameters influencing the ion‐producing efficiency of palladium nanostructures (nanoparticles [Pd‐NP], nanoflowers, nanofilms) during laser irradiation were studied in this paper. The nanostructures were immobilized on the surface of different solid inorganic carrier materials (porous and mono‐crystalline silicon, anodic porous aluminum oxide, glass and polished steel) by using classical galvanic deposition, electroless local deposition and sputtering. It was the goal of this study to investigate the influence of both the nanoparticular layer as well as the carrier material on ion production for selected analyte molecules. Our experiments demonstrated that the dimensions of the synthesized nanostructures, the thickness of the active layers, surface disorders, thermal conductivity and physically or chemically adsorbed water influenced signal intensities of analyte ions during surface‐assisted laser desorption/ionization (SALDI) while no effects such as plasmon resonance, photoelectric effect or catalytic activity were expected to occur. Excellent LDI abilities were seen for Pd‐NPs immobilized on steel, while Pd nanoflowers on porous silicon exhibited several disadvantages; viz, strong memory effects, dependency of the analytical signal on amount of physically and chemically adsorbed water inside porous carrier, reduced SALDI activity from unstable connections between Pd and semiconductor material, decrease of the melting point of pure silicon after Pd immobilization and resulting strong laser ablation of metal/semiconductor complex, as well as significantly changed surface morphology after laser irradiation. The analytical performance of Pd‐NP/steel was further improved by applying a hydrophobic coating to the steel surface before galvanic deposition. This procedure increased the distance between Pd‐NPs, thus reducing thermal stress upon LDI; it simultaneously decreased spot sizes of deposited sample solutions. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface assisted laser desorption/ionization on two-layered amorphous silicon coated hybrid nanostructures

Matrix-free laser desorption/ionization was studied on two-layered sample plates consisting of a substrate and a thin film coating. The effect of the substrate material was studied by depositing thin films of amorphous silicon on top of silicon, silica, polymeric photoresist SU-8, and an inorganic-organic hybrid. Des-arg⁹-bradykinin signal intensity was used to evaluate the sample plates. Silica and hybrid substrates were found to give superior signals compared with silicon and SU-8 because of thermal insulation and compatibility with amorphous silicon deposition process. The effect of surface topography was studied by growing amorphous silicon on hybrid micro- and nanostructures, as well as planar hybrid. Compared with planar sample plates, micro- and nanostructures gave weaker and stronger signals, respectively. Different coating materials were tested by growing different thin film coatings on the same substrate. Good signals were obtained from titania and amorphous silicon coated sample plates, but not from alumina coated, silicon nitride coated, or uncoated sample plates. Overall, the strongest signals were obtained from oxygen plasma treated and amorphous silicon coated inorganic-organic hybrid, which was tested for peptide-, protein-, and drug molecule analysis. Peptides and drugs were analyzed with little interference at low masses, subfemtomole detection levels were achieved for des-arg⁹-bradykinin, and the sample plates were also suitable for ionization of small proteins.