高β相聚偏氟乙烯基复合体系的制备及压电性能

为了提高聚偏氟乙烯(PVDF)的压电性能,需要寻找有效的途径来提高PVDF的电活性相(β相)含量。 通过水热法成功合成了Ag、ZnO以及二者复合(Ag-ZnO)的3种类型纳米粒子,并与PVDF共混形成PVDF复合薄膜。 通过表征PVDF复合材料的形貌,结晶性能和压电性能,可以发现Ag-ZnO复合纳米粒子的协同作用可以有效提高PVDF的结晶性能和压电性能。 此外,通过单轴拉伸可以使得所有PVDF膜的β相含量得到进一步提高,其中拉伸后的PVDF/Ag-ZnO纳米颗粒(P-C)的β相物质的量分数最高,达到70.0％,最佳的压电系数(d₃₃)达到了31.0 pC/N。     

低压近场静电纺丝ZnO/PVDF复合微米纤维阵列的制备及压力传感性

利用低压近场静电纺丝技术制备了ZnO/PVDF(聚二偏氟乙烯)微米纤维平行阵列, 通过光学显微镜、扫描电子显微镜(SEM)和X射线能量色散光谱(EDS)对ZnO/PVDF微米纤维进行了表征. 该复合纤维的平均直径约为40 μm. EDS分析测试证明ZnO纳米颗粒已经掺杂进入了平行微米纤维中. 压电性能和电学性能测试结果表明, ZnO/PVDF微米纤维阵列的压电性能增强. 研究结果表明, 近场电纺丝ZnO/PVDF复合微米纤维阵列在压电型压力传感器和纳米发电机领域具有潜在的应用价值.     

低压近场静电纺丝ZnO/PVDF复合微米纤维阵列的制备及压力传感性（英文）

利用低压近场静电纺丝技术制备了ZnO/PVDF(聚二偏氟乙烯)微米纤维平行阵列,通过光学显微镜、扫描电子显微镜(SEM)和X射线能量色散光谱(EDS)对ZnO/PVDF微米纤维进行了表征.该复合纤维的平均直径约为40μm.EDS分析测试证明ZnO纳米颗粒已经掺杂进入了平行微米纤维中.压电性能和电学性能测试结果表明,ZnO/PVDF微米纤维阵列的压电性能增强.研究结果表明,近场电纺丝ZnO/PVDF复合微米纤维阵列在压电型压力传感器和纳米发电机领域具有潜在的应用价值.     

微乳液聚合耦合共混法构建聚偏氟乙烯共混杂化膜

以苯乙烯和甲基丙烯酸甲酯混合物作为油相, 采用反相微乳液法制备了AgCl纳米粒子; 通过微乳液原位聚合油相单体得到包含AgCl纳米粒子的聚合乳液; 将聚合乳液与聚偏氟乙烯(PVDF)通过共混法构建了包含AgCl纳米粒子的PVDF共混杂化膜. 紫外-可见光谱、 透射电子显微镜(TEM)及扫描电子显微镜(SEM)等表征结果和超滤实验结果表明, 聚合乳液加入的同时引入了亲水性聚合物和表面亲水的AgCl纳米粒子, 不仅改善了PVDF共混杂化膜的孔隙率和平均孔径, 还显著增强了PVDF共混杂化膜的极性和亲水性, 最终提升了膜的水通量和抗污染性能; 过量聚合乳液加入后不能与PVDF材料均匀共混, 而且AgCl纳米粒子也会在膜中形成团聚物堵塞膜孔隙, 从而削弱了膜的水通量和抗污染性能.     

嵌段共聚物调控纳米粒子自组装的研究进展

嵌段共聚物和纳米粒子复合纳米材料具有优异的性能,在生物医药、光电材料、催化材料等领域具有很大的应用价值,已成为备受关注的研究热点.利用嵌段共聚物自组装能够形成特定形态的纳米结构聚集体,将纳米粒子选择性的分布和定位于嵌段共聚物聚集体中,可以改善纳米粒子的性能及其应用.本文综述了近年来实验上利用自组装制备嵌段共聚物-纳米粒子复合纳米材料的方法,并总结分析了影响纳米粒子在嵌段共聚物聚集体中的分布和定位的各种因素,包括纳米粒子的大小、形状及其表面化学.最后总结了嵌段共聚物-纳米粒子的自组装在理论模拟方面的研究.     

粒子-聚合物相互作用与粒子-粒子相互作用对聚合物基纳米复合物力学性能的影响

聚合物基纳米复合物(PNCs)具有比传统高分子材料更加优异的光学、力学、热力学等性能,广泛应用于各个工程领域.而纳米粒子(NPs)对材料性能提高的机理则是当前聚合物纳米复合物领域研究的重要问题,聚合物纳米复合体系相互作用的影响因素众多,至今尚未明确并完整建立复合体系相互作用与性能增强之间的关系.本文总结了近年来关于纳米粒子填充聚合物基体力学性能的研究,从粒子-聚合物相互作用和粒子-粒子相互作用角度阐述了聚合物纳米复合体系力学性能的增强机理,并根据体系中不同的结构关系分别总结了聚合物/未改性纳米粒子复合体系和聚合物/聚合物接枝纳米粒子复合体系中影响力学性能的因素.该部分内容具有重要的理论和实践意义,有助于构建复合体系微观结构与宏观性能之间的关系,进而对微观层面调控PNCs的力学性能提供指导.     

基于聚合物复合物的自修复与可修复聚合物材料

聚合物材料在使用过程中受到损伤,就会丧失原有的力学强度和功能.修复功能能够延长聚合物材料的使用寿命、减少原料浪费并提高材料性能的可靠性.赋予聚合物材料修复性能是可持续发展社会对聚合物材料设计的重要需求.本文系统地介绍了本研究组发展的基于溶液中复合的聚合物复合物构筑自/可修复聚合物材料的方法,以及基于高密度的超分子可逆作用力及聚合物复合原位生成的纳米粒子的协同,解决聚合物复合材料的良好修复性能与高力学强度之间矛盾的策略.基于聚合物复合的方法,我们成功制备了聚合物凝胶、弹性体及高强度聚合物复合材料,并实现了上述修复材料在防雾、质子传导和传感等方面的功能.聚合物复合的方法为制备具有优异力学性能和功能的自/可修复聚合物材料提供了新思路.     

Papain/HA-Phe自组装复合纳米粒子及乳化性能

用L-苯丙氨酸乙酯(L-Phe)改性透明质酸(HA)双亲性生物大分子(HA-Phe)负载生物活性分子木瓜蛋白酶(papain),HA-Phe和Papain通过静电、氢键和疏水相互作用自组装形成生物基Papain/HA-Phe复合纳米粒子.用动态光散射(DLS)和透射电镜(TEM)对复合纳米粒子的尺寸和形貌进行表征.结果显示,形成的复合纳米粒子为球形结构,粒径约308 nm.以此复合纳米粒子为颗粒乳化剂稳定白油,形成水包油型Pickering乳液.乳液的扫描电镜(SEM)显示,复合纳米粒子吸附在油水界面,形成复合纳米粒子的吸附层以稳定乳液.详细研究了pH和盐浓度对复合纳米粒子性质和复合纳米粒子乳化性能的影响.结果表明,随着pH增加,复合纳米粒子在油滴表面的吸附数目减少,乳化性能降低;随着盐浓度增加,复合纳米粒子的形变能力增强,乳化性能提高.进一步研究了乳液中木瓜蛋白酶的活性及美白效果.研究表明,制备的乳液保留了一定的活性,且具有一定的美白效果.     

ZrO2纳米粒子原位杂化PVDF膜的制备及其抗污染性能

针对传统聚合物膜抗污染性差的问题,本文从杂化膜结构设计出发,提出将ZrO2纳米粒子的原位制备和聚偏氟乙烯(PVDF)相转化成膜过程有机结合的制膜新方法.该方法将阴离子交换树脂引入到N,N-二甲基甲酰胺(DMF)中,以氧氯化锆为原料,利用阴离子交换树脂提供的―OH与无机盐的阴离子进行交换,得到ZrO2纳米粒子均匀分散的N,N-二甲基甲酰胺溶胶体系.随后将PVDF聚合物溶解到所得的N,N-二甲基甲酰胺溶胶体系中,获得均一、透明的铸膜液.利用X射线光电子能谱(XPS)和透射电子显微镜(TEM)对杂化膜中锆的存在状态和分散性能进行了表征.结果表明,ZrO2纳米粒子均匀分散在PVDF基体中,并且形成的纳米粒子的粒径约为10-20 nm.通过粘度、分相速度和膜形态的测定,研究了成膜机理.结果表明,ZrO2纳米粒子的引入加速了铸膜液成膜过程的分相速度.杂化膜的亲水性能通过接触角测定仪进行了评价.并选择以牛血清蛋白为代表模拟污染物,考察了杂化超滤膜的抗污染性能.结果表明,原位形成的ZrO2纳米粒子显著提高了膜的亲水性,减少了膜对蛋白质的吸附.这种将ZrO2纳米粒子的原位制备和PVDF相转化成膜过程有机结合的制膜新方法在有机-无机杂化膜的制备领域具有显著意义.     

以胶体粒子为模板制备核壳纳米复合粒子

核壳纳米复合粒子具有许多不同于单组分胶体粒子的独特的光、电、磁、催化等物理与化学性质,是构筑新型功能复合材料的重要组元,在光子带隙材料、微波吸收材料、电磁流变液、催化剂和生物等领域有重要应用.本文从控制核壳复合粒子的微观结构及壳层均匀性与厚度的角度,详细评述了目前以胶体粒子为模板制备粒径从纳米到微米尺度的核壳复合粒子的方法.指出利用胶体粒子模板表面与壳层物质或其前驱物间的特殊相互作用(包括静电和化学相互作用),是完善现有制备方法和发展新方法来制备具有设定组成、结构和性能的核壳复合粒子的关键,同时也是将来的粒子表面纳米工程和获取有序的、先进纳米复合材料的主要方向。     

Functional nanocomposites for energy storage: chemistry and new horizons

Energy storage devices are one of the hot spots in recent years due to the environmental problems caused by the large consumption of unsustainable energy such as petroleum or coal. Capacitors are a common device for energy storage, especially electrical energy. A variety of types including electrolytic capacitors, mica capacitors, paper capacitors, ceramic capacitors, film capacitors, and non-polarized capacitors have been proposed. Their specific applications depend on their intrinsic properties. Dielectric capacitors have reasonable energy storage density, with current research focusing on the enhancement of energy density and making the materials more flexible as well as lightweight. Improvement strategies are based on the premise that use of two or more different materials (e.g. polymers and ceramics/metals) at an optimal formulation can result in properties that combine the advantages of the precursor materials. Different polymers especially fluoropolymers (e.g. PVDF and PVDF based co-polymer) are the main components in dielectric nanocomposites for capacitors with high energy storage performance. In this article, we have briefly summarized the recent advances in functional polymers nanocomposites for energy storage applications with a primary focus on polymers, surface engineering, functional groups and novel synthesis/manufacturing concepts applied to new materials. The article presents a unique integrated structure and approaches providing key knowledge for the design and development of novel, low-cost, multifunctional next-generation energy storage materials with improved efficiency.     

MXenes及MXenes复合材料的制备及其在能量存储与转换中的应用

综述了新型过渡金属碳化物和/或氮化物(MXenes)二维纳米材料的合成及其在电化学能源存储与转换中应用的研究进展,这些应用可以分为如下三类:二次电池、超级电容器以及电化学催化。 由于具有二维结构、金属导电性、亲水性表面以及其它优点,MXene二维纳米材料在这些应用领域展示了良好的性能,而且还可以通过嵌入、复合、掺杂、组装等方法来进一步提高其电化学性能。 本文为新型MXenes以及相关材料的开发、合成和应用提供了思路,这种新型MXenes 材料可以用于能量存储与转换、电子和催化等领域。     

Persistent polarization in poly(vinylidene fluoride). I. Surface charges and piezoelectricity of poly(vinylidene fluoride) thermoelectrets

Persistent polarization in poly(vinylidene fluoride) (PVDF) thermoelectrets prepared under high electric field strengths has been studied by measurements of surface charge and piezoelectricity. An anomalous heterocharge appears after the normal homocharge disappears. A model is proposed to explain the surface charge phenomena; the anomalous heterocharge is expressed as a sum of a hidden homocharge and a hidden heterocharge. It is concluded that the anomalous heterocharge as well as the apparent homocharge are not responsible for the piezoelectricity of PVDF electrets. The piezoelectricity is shown to depend on the structure of the original PVDF films or the amount of β-form crystals. However, the piezoelectricity is not attributed to stress dependence of the spontaneous polarization in the β-form crystal of PVDF, but to the hidden polarization which bring about the anomalous heterocharge. The hidden polarizations are attributed to trapped charges.     

聚偏氟乙烯共混体系的压电性及其分子运动——聚偏氟乙烯-聚甲基丙烯酸甲酯共混体系

本文研究了PVDF-PMMA共混体系的压电性及其分子运动.其松弛转变过程与PVDF-P(VDF-HFE)及PVDF-P(VDF-TFE)共混体系相似,压电性低于PVDF-P(VDF-TFE)共混体系.当PMMA含量为3％时,其压电性与PVDF的接近,而其退极化温度却高于PVDF以及上述二个含氟共混体系的薄膜,随着PMMA的增加,其压电性也随之减弱,这是由于非晶相中偶极子浓度降低之故.     

Improving piezoelectric and pyroelectric properties of electrospun PVDF nanofibers using nanofillers for energy harvesting application

In this study, it was aimed to increase the piezoelectric and pyroelectric properties of electrospun polyvinylidene fluoride (PVDF) nanofibers simultaneously by using specific nanofillers. Graphene oxide (GO), graphene, and halloysite nanotubes with different concentrations (0, 0.05, 0.4, and 1.6% wt/wt) were combined with PVDF solution and were fabricated in the form of nanofibers through electrospinning. Pyroelectric properties of samples were measured by submerging sealed samples in hot water (360°K) and ice (270°K). The piezoelectric properties of the samples were evaluated through bending tests. The microstructural, mechanical, and thermal properties of the electrospun PVDF nanocomposite were investigated using scanning electron microscope, Instron instrument, and thermogravimetric analysis, respectively. To further support the experimental observations for generating electric voltage in the bended nanogenerator, the PVDF nanogenerator (PNG) was also modeled by a finite element analysis based on the theory of linear piezoelectricity using COMSOL Multiphysics simulation software. Experimental results showed that adding nanofillers could improve the piezoelectric and pyroelectric properties of all samples, associated with the increment of β‐phase in the nanofibers. It was concluded that adding nanofillers could increase pyroelectricity about 50% more than piezoelectricity in pristine PVDF nanofiber web. The PNG containing 1.6 wt% GO showed the highest efficiency in terms of piezoelectricity and pyroelectricity. In addition, the results showed that the ratio of piezoelectric to pyroelectric coefficients was constant (~1.5) and it was independent of the nanofiller type and content. The effect of external force and vibration frequency on the output voltage was also investigated. Increasing the compressive force and vibration frequency caused a greater output voltage. Finally, the fabricated nanogenerator was integrated on insole and elbow to investigate its energy harvesting capabilities from body movement.     

Influence of Ce addition on the catalytic behavior of alumina-supported Cu-Co catalysts in NO reduction with CO

Polyvinylidene difluoride (PVDF) is one of the most widely used piezoelectric materials in micro-electromechanical systems (MEMS) and nano-electromechanical systems (NEMS) due to its excellent properties. Its applications range from biological to electric devices, such as an artificial hip joint, a microgripper, and a force sensor. It is critical to understand friction, adhesion, and wear mechanisms of this material. In this study, effect of piezoelectricity and lubricant with electric field on tribological properties was investigated, using poled and unpoled PVDF. To understand the tribological properties at nano- and macroscales, scale effect was also studied using an AFM and a tribometer. Relevant mechanisms are discussed.     

Persistent polarization in poly(vinylidene fluoride). II. Piezoelectricity of poly(vinylidene fluoride) thermoelectrets

The piezoelectricity of PVDF thermoelect rets formed with vacuum-coated aluminum electrodes has been investigated in detail. The piezoelectricity depends on the β-form crystal structure of PVDF homopolymer and copolymers. However, the piezoelectricity is not attributed to the stress dependence of the spontaneous polarization of β-form crystals, but rather to the persistent polarization arising from trapped charges. The trapping mechanism is discussed.     

聚羟基脂肪酸酯生物合成的研究进展

聚羟基脂肪酸酯 (PHA)是原核微生物在碳、氮营养失衡的情况下 ,作为碳源和能源贮存而合成的一类热塑性聚酯。它除了具有与化学合成高分子相似的性质外 ,还具有一般化学合成高分子没有的性质 ,如生物可降解性、生物相容性、压电性、光学活性等特殊性质 ,因而具有广阔的应用前景。国内外已对PHA进行了大量的研究。本文主要综述了近二、三年来国内外对PHA生物合成的研究进展     

Design of Fluorescent Hybrid Materials Based on POSS for Sensing Applications

Polyhedral oligomeric silsesquioxane (POSS) has a nanoscale silicon core and eight organic functional groups on the surface, with sizes from 0.7 to 1.5 nm. The three-dimensional nanostructures of POSS can be used to build all types of hybrid materials with specific performance and controllable nanostructures. The applications of POSS-based fluorescent materials have spread across various fields. In particular, the employment of POSS-based fluorescent materials in sensing application can achieve high sensitivity, selectivity, and stability. As a result, POSS-based fluorescent materials are attracting increasing attention due to their fascinating vistas, including unique structural features, easy fabrication, and tunable optical properties by molecular design. Here, we summarize the current available POSS-based fluorescent materials from design to sensing applications. In the design section, we introduce synthetic strategies and structures of the functionalized POSS-based fluorescent materials, as well as photophysical properties. In the application section, the typical POSS-based fluorescent materials used for the detection of various target objects are summarized with selected examples to elaborate on their wide applications.