Rapid and ultrasensitive colorimetric detection of mercury(II) by chemically initiated aggregation of gold nanoparticles

The article describes a method for rapid and visual determination of Hg(II) ion using unmodified gold nanoparticles (Au-NPs). It involves the addition of Au-NPs to a solution containing Hg(II) ions which, however, does not induce a color change. Next, a solution of lysine is added which induces the aggregation of the Au-NPs and causes the color of the solution to change from wine-red to purple. The whole on-site detection process can be executed in less than 15 min. Other amines (ethylenediamine, arginine, and melamine) were also investigated with respect to their capability to induce aggregation. Notably, only amines containing more than one amino group were found to be effective, but a 0.4 μM and pH 8 solution of lysine was found to give the best results. The detection limits for Hg (II) are 8.4 pM (for instrumental read-out) and 10 pM (for visual read-out). To the best of our knowledge, this LOD is better than those reported for any other existing rapid screening methods. The assay is not interfered by the presence of other common metal ions even if present in 1000-fold excess over Hg(II) concentration. It was successfully applied to the determination of Hg(II) in spiked tap water samples. We perceive that this method provides an excellent tool for rapid and ultrasensitive on-site determination of Hg(II) ions at low cost, with relative ease and minimal operation.

Rapid and ultrasensitive detection of mercury ions using gold nanoparticle based label-free colorimetric method with excellent sensitivity, easy operation and low cost.

     

An ultrasensitive conformation-dependent colorimetric probe for the detection of mercury(II) using exonuclease III-assisted target recycling and gold nanoparticles

An ultrasensitive conformation-dependent colorimetric assay has been developed for the detection of mercury(II) ions. It is based on the use of exonuclease III (Exo III)-assisted target recycling and gold nanoparticles (AuNPs). In the absence of Hg(II), the hairpin-shaped DNA probe (H-DNA) binds to AuNPs and stabilizes them in solutions of high ionic strength. In the presence of Hg(II), on the other hand, the sticky termini of the H-DNA form a rigid DNA duplex stem with a blunt 3′-terminus. Thus, Exo III is activated as a biocatalyst for selective and stepwise removal of mononucleotides from the 3′-terminus of the H-DNA. As a result, Hg(II) is released from the T?Hg(II)?T complexes. The guanine-rich sequences released from the H-DNA are then self-assembled with potassium ion to form a stable G-quadruplex conformation. In solutions of high ionic strength, this results in aggregation of AuNPs and a color change from red to blue which can be seen with bare eyes. The method is highly sensitive and selective. It has a linear response in the 10 pM to 100 nM Hg(II) concentration range, and the detection limit is as low as 3.2 pM (at an S/N ratio of 3). The relative standard deviation at a level of 0.5 nM of Hg(II) is 4.9% (for n?=?10). The method was applied to the detection of Hg(II) in spiked environment water samples, with recoveries ranging from 92% to 106%.

Open image in new window

Graphical abstract A conformation-dependent colorimetric system was fabricated for label-free detection of mercury(II) by utilizing exonuclease III(Exo III)-assisted target recycling and gold nanoparticles (AuNPs).

     

Rapid and sensitive colorimetric visualization of phthalates using UTP-modified gold nanoparticles cross-linked by copper(II)

A simple and reliable colorimetric method for determination of phthalates is developed utilizing uridine-5'-triphosphate (UTP)-modified gold nanoparticles as a color indicator and Cu(2+) as a cross-linker. The method demonstrates superior sensitivity with a detection limit of phthalates of ca. 0.5 ppm.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Rapid naked-eye detection of mercury ions based on non-crosslinking aggregation of double-stranded DNA-carrying gold nanoparticles

Colorimetric detection of mercury ions (Hg(2+)) with the naked eye was accomplished within 1 min by a combination of non-crosslinking aggregation of double-stranded DNA-carrying gold nanoparticles and complex formation of thymine-Hg(2+)-thymine.     

Metal-induced aggregation of mononucleotides-stabilized gold nanoparticles: an efficient approach for simple and rapid colorimetric detection of Hg(II)

A new approach for simple and rapid colorimetric detection of Hg(2+) in aqueous solution is proposed based on Hg(2+)-induced aggregation of mononucleotides-stabilized gold nanoparticles.     

Enzyme-free colorimetric assay for mercury(II) using DNA conjugated to gold nanoparticles and strand displacement amplification

The authors describe a colorimetric method for the determination of Hg(II) ion. It is based on the color change from red to colorless as displayed by gold nanoparticle (AuNP) modified with thymine - rich DNA. Signal amplification is accomplished by free strand displacement recycling. In this strategy, Hg(II) unfolds the arch-trigger duplex due to the high affinity between Hg(II) and the thymines to form T-Hg(II)-T structures, thereby causing the release of trigger. The liberated trigger unfolds the hairpin structure of H1, and unfolded H1 further unfolds with H2. As a result, the H2 hairpin displaces trigger, and the released trigger unfolds another H1. This results in strong and enzyme-free strand displacement recycling amplification. The aggregation of DNA-AuNPs occurs in the presence of the duplex formed by hairpins H2 and H1. This results in a color change from red to colorless that can be visually observed. Under optimal conditions, the assay has a detection range over 4 orders of magnitude and a 3.4 nM detection limit. The assay is selective, sensitive, rapid and cost-effective. In our perception, it represents a useful platform for determination of Hg(II).

Open image in new window

Graphical abstract Schematic presentation of the  simple, rapid, low cost colorimetric detection of mercury(II) based on enzyme-free strand displacement amplification along with DNA-labeled AuNP.

     

Functionalized gold nanoparticles for ultrasensitive DNA detection

A major challenge in the area of DNA detection is the development of rapid methods that do not require polymerase chain reaction (PCR) amplification of the genetic sample. The PCR amplification step increases the cost of the assay, the complexity of the detection, and the quantity of DNA required for the assay. In this context, methods that are able to perform DNA analyses with ultrasensitivity have recently been investigated with the aim of developing new PCR-free detection protocols. Functionalized gold nanoparticles have played a central role in the development of such methods. Here, possibilities offered by functionalized gold nanoparticle in the ultrasensitive detection of DNA are discussed. The different functionalization protocols available for gold nanoparticles and the principal DNA detection methods that are able to detect DNA at the femtomolar to attomolar level are presented.     

Parameters for selective colorimetric sensing of mercury(II) in aqueous solutions using mercaptopropionic acid-modified gold nanoparticles

We unveil a new homogeneous assay-using mercaptopropionic acid-modified Au nanoparticles in the presence of 2,6-pyridinedicarboxylic acid for the highly selective and sensitive detection of Hg(2+) ions.     

Selective detection of mercury (II) ion using nonlinear optical properties of gold nanoparticles

Contamination of the environment with heavy metal ions has been an important concern throughout the world for decades. Driven by the need to detect trace amounts of mercury in environmental samples, this article demonstrates for the first time that nonlinear optical (NLO) properties of MPA-HCys-PDCA-modified gold nanoparticles can be used for rapid, easy and reliable screening of Hg(II) ions in aqueous solution, with high sensitivity (5 ppb) and selectivity over competing analytes. The hyper Rayleigh scattering (HRS) intensity increases 10 times after the addition of 20 ppm Hg(2+) ions to modified gold nanoparticle solution. The mechanism for HRS intensity change has been discussed in detail using particle size-dependent NLO properties as well as a two-state model. Our results show that the HRS assay for monitoring Hg(II) ions using MPA-HCys-PDCA-modified gold nanoparticles has excellent selectivity over alkali, alkaline earth (Li(+), Na(+), K(+), Mg(2+), Ca(2+)), and transition heavy metal ions (Pb(2+), Pb(+), Mn(2+), Fe(2+), Cu(2+), Ni(2+), Zn(2+), Cd(2+)).     

Label-free aptamer-based colorimetric detection of mercury ions in aqueous media using unmodified gold nanoparticles as colorimetric probe

We report a simple and sensitive aptamer-based colorimetric detection of mercury ions (Hg²⁺) using unmodified gold nanoparticles as colorimetric probe. It is based on the fact that bare gold nanoparticles interact differently with short single-strand DNA and double-stranded DNA. The anti-Hg²⁺ aptamer is rich in thymine (T) and readily forms T–Hg²⁺–T configuration in the presence of Hg²⁺. By measuring color change or adsorption ratio, the bare gold nanoparticles can effectively differentiate the Hg²⁺-induced conformational change of the aptamer in the presence of a given salt with high concentration. The assay shows a linear response toward Hg²⁺ concentration through a five-decade range of 1 × 10⁻⁴ mol L⁻¹ to 1 × 10⁻⁹ mol L⁻¹. Even with the naked eye, we could identify micromolar Hg²⁺ concentrations within minutes. By using the spectrometric method, the detection limit was improved to the nanomolar range (0.6 nM). The assay shows excellent selectivity for Hg²⁺ over other metal cations including K⁺, Ba²⁺, Ni²⁺, Pb²⁺, Cu²⁺, Cd²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, and Fe³⁺. The major advantages of this Hg²⁺ assay are its water-solubility, simplicity, low cost, visual colorimetry, and high sensitivity. This method provides a potentially useful tool for the Hg²⁺ detection.     

Direct colorimetric visualization of mercury (Hg) based on the formation of gold nanoparticles

It is critical to be able to detect and quantify Hg²⁺ ions under aqueous conditions with high sensitivity and selectivity. The technique presented herein provides a direct way for simple colorimetric visualization of Hg²⁺ ions in aqueous solution, based on the formation of gold nanoparticles through the Hg²⁺ catalyzed HAuCl₄/NH₂OH reaction. The outstanding selectivity and sensitivity result from the well-known amalgamation process that occurs between mercury and gold. The entire procedure takes less than 20 min. The limit of detection (2 ppb) shows excellent potential for monitoring ultralow levels of mercury in water samples.     

Azobenzene-based colorimetric chemosensors for rapid naked-eye detection of mercury(II)

Two new highly selective colorimetric chemosensors for Hg²⁺, based on azobenzene and highly selective Hg²⁺‐promoted deprotection of a dithioacetal have been designed and synthesized. In the presence of as little as 20 μM Hg²⁺, the sensors change their color from light yellow to deep red, which can easily be observed by the naked eye. The underlying signaling mechanism is intramolecular charge transfer (ICT). The sensors have good selectivity for Hg²⁺ with respect to several common alkali, alkaline earth, and transition metal ions. Furthermore, they can be used for in‐the‐field measurements by virtue of a dipstick approach without any additional equipment.     

A novel route to copper(II) detection using 'click' chemistry-induced aggregation of gold nanoparticles

A simple colorimetric method for the detection of copper ions in water is described. This method is based on the 'click' copper(I)-catalyzed azide-alkyne cycloaddition reaction and its use in promoting the aggregation of azide-tagged gold nanoparticles by a dialkyne cross-linker is described. Nanoparticle cross-linking, evidenced as a colour change, is used for the detection of copper ions. The lowest detected concentration by the naked eye was 1.8 μM, with the response linear with log(concentration) between 1.8-200 μM. The selectivity relative to other potentially interfering ions was evaluated.     

Visual detection of cancer cells by colorimetric aptasensor based on aggregation of gold nanoparticles induced by DNA hybridization

A simple but highly sensitive colorimetric method was developed to detect cancer cells based on aptamer–cell interaction. Cancer cells were able to capture nucleolin aptamers (AS 1411) through affinity interaction between AS 1411 and nucleolin receptors that are over expressed in cancer cells, The specific binding of AS 1411 to the target cells triggered the removal of aptamers from the solution. Therefore no aptamer remained in the solution to hybridize with complementary ssDNA-AuNP probes as a result the solution color is red. In the absence of target cells or the presence of normal cells, ssDNA-AuNP probes and aptamers were coexisted in solution and the aptamers assembled DNA-AuNPs, produced a purple solution. UV–vis spectrometry demonstrated that this hybridization-based method exhibited selective colorimetric responses to the presence or absence of target cells, which is detectable with naked eye. The linear response for MCF-7 cells in a concentration range from 10 to 10⁵ cells was obtained with a detection limit of 10 cells. The proposed method could be extended to detect other cells and showed potential applications in cancer cell detection and early cancer diagnosis.     

Cationic polymers and aptamers mediated aggregation of gold nanoparticles for the colorimetric detection of arsenic(III) in aqueous solution

As(III) specifically interacts with an arsenic-binding aptamer to form an As(III)-aptamer complex, so that the following cationic polymer can aggregate gold nanoparticles (AuNPs) and cause a remarkable change in color, which enables the colorimetric detection of As(III) with high selectivity and a detection limit of 5.3 ppb.     

Detection of mercury(II) based on Hg2+ -DNA complexes inducing the aggregation of gold nanoparticles

A DNA-Au NP probe for sensing Hg2+ using the formation of DNA-Hg2+ complexes through thymidine (T)-Hg2+ -T coordination to control the negative charge density of the DNA strands-thereby varying their structures-adsorbed onto Au NPs.