Fabrication of Self-Expanding Metal–Organic Cages Using a Ring-Openable Ligand

Metal–organic cages (MOCs), which are formed via coordination-driven assembly, are being extensively developed for various applications owing to the utility of their accessible molecular-sized cavity. While MOC structures are uniquely and precisely predetermined by the metal coordination number and ligand configuration, tailoring MOCs to further modulate the size, shape, and chemical environment of the cavities has become intensively studied for a more efficient and adaptive molecular binding. Herein, we report self-expanding MOCs that exhibit remarkable structural variations in cage size and flexibility while maintaining their topology. A cyclic ligand with an oligomeric chain tethering the two benzene rings of stilbene was designed and mixed with Rh^II ions to obtain the parent MOCs. These MOCs were successfully transformed into expanded MOCs via the selective cleavage of the double bond in stilbene. The expanded MOCs could effectively trap multidentate N-donor molecules in their enlarged cavity, in contrast to the original MOCs with a narrow cavity. As the direct synthesis of expanded MOCs is impractical because of the entropically disfavored structures, self-expansion using ring-openable ligands is a promising approach that allows precision engineering and the production of functional MOCs that would otherwise be inaccessible.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

Controlled evaporative self-assembly of polymer nanoribbons using oscillating capillary bridges

Evaporative self-assembly (ESA), based on the “coffee-ring” effect, is a versatile technique for assembling particle solutions into mesoscale patterns and structures on different substrates. ESA works with a wide variety of organic and inorganic materials, where the solution is a combination of volatile solvent and nonvolatile solute. Modified ESA methods, such as “stop-and-go flow coating,” use a programmed meniscus “stick–slip” motion to create mesoscale assemblies with controlled shape, size, and architecture. However, current methods are not scalable for increased production volumes or patterning large surface areas. We demonstrate a new ESA method, where an oscillating blade controls the meniscus depinning and drives the evaporative assembly of solutes at the pinned meniscus. Results show that oscillation frequency and substrate speed control time/distance intervals between successive meniscus depinning, and the assembly dimensions depend on solution concentration, oscillation frequency, substrate speed, and meniscus height. We report the mechanism of the meniscus depinning and the control over assembly cross-sectional dimensions. This advance provides a scalable ESA method with faster processing times and maintained advantages. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1545–1551     

Constructing Large 2D Lattices Out of DNA-Tiles

The predictable nature of deoxyribonucleic acid (DNA) interactions enables assembly of DNA into almost any arbitrary shape with programmable features of nanometer precision. The recent progress of DNA nanotechnology has allowed production of an even wider gamut of possible shapes with high-yield and error-free assembly processes. Most of these structures are, however, limited in size to a nanometer scale. To overcome this limitation, a plethora of studies has been carried out to form larger structures using DNA assemblies as building blocks or tiles. Therefore, DNA tiles have become one of the most widely used building blocks for engineering large, intricate structures with nanometer precision. To create even larger assemblies with highly organized patterns, scientists have developed a variety of structural design principles and assembly methods. This review first summarizes currently available DNA tile toolboxes and the basic principles of lattice formation and hierarchical self-assembly using DNA tiles. Special emphasis is given to the forces involved in the assembly process in liquid-liquid and at solid-liquid interfaces, and how to master them to reach the optimum balance between the involved interactions for successful self-assembly. In addition, we focus on the recent approaches that have shown great potential for the controlled immobilization and positioning of DNA nanostructures on different surfaces. The ability to position DNA objects in a controllable manner on technologically relevant surfaces is one step forward towards the integration of DNA-based materials into nanoelectronic and sensor devices.     

Frame‐Guided Assembly of Vesicles with Programmed Geometry and Dimensions

In molecular self‐assembly molecules form organized structures or patterns. The control of the self‐assembly process is an important and challenging topic. Inspired by the cytoskeletal‐membrane protein lipid bilayer system that determines the shape of eukaryotic cells, we developed a frame‐guided assembly process as a general strategy to prepare heterovesicles with programmed geometry and dimensions. This method offers greater control over self‐assembly which may benefit the understanding of the formation mechanism as well as the functions of the cell membrane.     

Size and morphology of assemblies formed by DNA and lysozyme in dilute aqueous mixtures

Assemblies formed by a well-defined quality of DNA (4331 bp T7 DNA) and the small net-cationic protein lysozyme in dilute aqueous solutions have been characterized using cryo-transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS) as the main techniques. In a wide range of different DNA to lysozyme ratios in solutions of low ionic strength, dispersions of aggregates with the same general morphology and a practically constant hydrodynamic size are formed. The basic structure formed in the dispersions is that of rather flexible worm-like assemblies with a diameter of 10-20 nm, which are suggested to be made up by bundles of on the order of 10 DNA chains with an intervening matrix of lysozyme. With increased ionic strength, the worm-like appearance of the assemblies is lost and they adopt a less well-defined shape. The results suggest that the formation of the DNA-lysozyme aggregates is strongly influenced by cooperative assembly of the components and that, in addition to the electrostatic attraction between DNA and lysozyme, attractive interactions between the protein units are important in governing the behavior of the system.     

Nanoimprint Lithography‐Directed Self‐Assembly of Bimetallic Iron–M (M=Palladium,Platinum) Complexes for Magnetic Patterning

Self‐assembly of d⁸ metal polypyridine systems is a well‐established approach for the creation of 1D organometallic assemblies but there are still challenges for the large‐scale construction of nanostructured patterns from these building blocks. We describe herein the use of high‐throughput nanoimprint lithography (NIL) to direct the self‐assembly of the bimetallic complexes [4′‐ferrocenyl‐(2,2′:6′,2′′‐terpyridine)M(OAc)]⁺(OAc)^? (M=Pd or Pt; OAc=acetate). Uniform nanorods are fabricated from the molecular self‐organization and evidenced by morphological characterization. More importantly, when top‐down NIL is coupled with the bottom‐up self‐assembly of the organometallic building blocks, regular arrays of nanorods can be accessed and the patterns can be controlled by changing the lithographic stamp, where the mold imposes a confinement effect on the nanorod growth. In addition, patterns consisting of the products formed after pyrolysis are studied. The resulting arrays of ferromagnetic FeM alloy nanorods suggest promising potential for the scalable production of ordered magnetic arrays and fabrication of magnetic bit‐patterned media.     

Stepwise noncovalent synthesis leading to dendrimer-based assemblies in water

We provide detailed insight into complex supramolecular assembly processes by fully characterizing a multicomponent model system using dynamic light scattering, cryogenic transmission electron microscopy, atomic force microscopy, and various NMR techniques. First, a preassembly of a host molecule (the fifth-generation urea-adamantyl poly(propylene imine) dendrimer) and 32 guest molecules (a water- and chloroform-soluble ureidoacetic acid guest) was made in chloroform. The association constant in chloroform is concealed by guest self-association and is therefore higher than 10(3) M(-1). Via the neat state the single-host complex was transferred to water, where larger dendrimer-based assemblies were formed. The core of these assemblies, consisting of multiple host molecules (on average three), is kinetically trapped upon dissolution in water, and its size is constant irrespective of the concentration. The guest molecules forming the corona of the assemblies, however, stay dynamic since they are still in rapid exchange on the NMR time scale, as they were in chloroform. A stepwise noncovalent synthesis provides a means to obtain metastable dynamic supramolecular assemblies in water, structures that cannot be formed in one step.     

In situ AFM study of amelogenin assembly and disassembly dynamics on charged surfaces provides insights on matrix protein self-assembly

Because self-assembly of matrix proteins is a key step in hard tissue mineralization, developing an understanding of the assembly pathways and underlying mechanisms is likely to be important for successful hard tissue engineering. While many studies of matrix protein assembly have been performed on bulk solutions, in vivo these proteins are likely to be in contact with charged biological surfaces composed of lipids, proteins, or minerals. Here we report the results of an in situ atomic force microscopy (AFM) study of self-assembly by amelogenin--the principal protein of the extracellular matrix in developing enamel--in contact with two different charged substrates: hydrophilic negatively charged bare mica and positively charged 3-aminopropyl triethoxysilane (APS) silanized mica. First we demonstrate an AFM-based protocol for determining the size of both amelogenin monomers and oligomers. Using this protocol, we find that, although amelogenin exists primarily as ~26 nm in diameter nanospheres in bulk solution at a pH of 8.0 studied by dynamic light scattering, it behaves dramatically differently upon interacting with charged substrates at the same pH and exhibits complex substrate-dependent assembly pathways and dynamics. On positively charged APS-treated mica surfaces, amelogenin forms a relatively uniform population of decameric oligomers, which then transform into two main populations: higher-order assemblies of oligomers and amelogenin monomers, while on negatively charged bare mica surfaces, it forms a film of monomers that exhibits tip-induced desorption and patterning. The present study represents a successful attempt to identify the size of amelogenin oligomers and to directly monitor assembly and disassembly dynamics on surfaces. The findings have implications for amelogenin-controlled calcium phosphate mineralization in vitro and may offer new insights into in vivo self-assembly of matrix proteins as well as their control over hard tissue formation.     

Using colloid lithography to fabricate silicon nanopillar arrays on silicon substrates

In this study, we partially grafted geminal silanol groups in the protecting organic shells on the surfaces of gold nanoparticles (AuNPs) and then assembled the alkyl-AuNP-Si(OH)(4) particles onto the surfaces of silicon (Si) wafers. The density of assembled AuNPs on the Si surface was adjusted by varying the geminal silanol group content on the AuNP surface; at its optimal content, it approached the high assembly density (0.0254 particles/nm(2)) of an AuNP assembled monolayer. Using reactive-ion etching (RIE) with the templates as masks, we transferred the patterned AuNP assemblies to form large-area, size-tunable, Si nanopillar arrays, the assembly density of which was controlled by the dimensions of the AuNPs. Using this colloidal lithography (CL) process, we could generate Si nanopillars having sub-10-nm diameters and high aspect ratios. The water contact angles of the high-aspect-ratio Si nanopillars approached 150°. We used another fabrication process, involving electron beam lithography and oxygen plasma treatment, to generate hydrophilic 200-nm-resolution line patterns on a Si surface to assemble the AuNPs into 200-nm-resolution dense lines for use as an etching mask. Subsequent CL provided a patterned Si nanopillar array having a feature size of 200 nm on the Si surface. Using this approach, it was possible to pattern sub-10-nm Si nanopillar arrays having densities as high as 0.0232 nm(-2).     

Variations in Complementary Hydrogen Bonds Direct Assembly Patterns of Isosteric Polyheteroaromatics at Surfaces

Intermolecular interactions guide self-assembly on the surface. Precise control over these interactions by rational design of the molecule should allow fine control over the self-assembly patterns. Functional groups installed for electronic modulation often induce significant changes in the molecular dimensions, thereby disrupting the original assembly pattern. To overcome this challenge, we have employed a family of isosteric phenazine derivatives, DHP , DAP , and DBQD , to investigate the impacts of hydrogen bonding on two-dimensional molecular self-assembly. While these molecules are similar in size and chemical composition, the strength and directionality of hydrogen bonding differ significantly depending on the chemical structure of donor-acceptor pairs and prototropic tautomerization from positional isomerism. Scanning tunneling microscopy (STM) characterization of the assembled structures on Ag(111), Au(111), and Cu(100) surfaces revealed that minimal changes in molecular structure have a profound impact on the self-assembly patterns. While DHP exhibits highly ordered and robust assemblies, DAP and DBQD show either spatially confined or ill-defined assemblies. In conjunction with hydrogen bonding, prototropic tautomerism is a potent strategy to modulate molecular 2D lattices on surfaces.     

Setting the environmental conditions for controlling gold nanoparticle assemblies

Fundamental insights into the factors that control the properties and structure of gold nanoparticle (AuNP) based assemblies enable the design and construction of new materials. The dimensions (shape and size) and the optical properties of AuNP assemblies are affected by the electronic properties of the organic cross-linker and the nature of the AuNPs.     

Controlled particle placement through convective and capillary assembly

A wide variety of methods are now available for the synthesis of colloidal particle having controlled shapes, structures, and dimensions. One of the main challenges in the development of devices that utilize micro- and nanoparticles is still particle placement and integration on surfaces. Required are engineering approaches to control the assembly of these building blocks at accurate positions and at high yield. Here, we investigate two complementary methods to create particle assemblies ranging from full layers to sparse arrays of single particles starting from colloidal suspensions of gold and polystyrene particles. Convective assembly was performed on hydrophilic substrates to create crystalline mono- or multilayers using the convective flow of nanoparticles induced by the evaporation of solvent at the three-phase contact line of a solution. On hydrophobic surfaces, capillary assembly was investigated to create sparse arrays and complex three-dimensional structures using capillary forces to trap and organize particles in the recessed regions of a template. In both methods, the hydrodynamic drag exerted on the particle in the suspension plays a key role in the assembly process. We demonstrate for the first time that the velocity and direction of particles in the suspension can be controlled to perform assembly or disassembly of particles. This is achieved by setting the temperature of the colloidal suspension above or below the dew point. The influence of other parameters, such as substrate velocity, wetting properties, and pattern geometry, is also investigated. For the particular case of capillary assembly, we propose a mechanism that takes into account the relative influences of these parameters on the motion of particles and that describes the influence of temperature on the assembly efficiency.     

Different apolipoproteins impact nanolipoprotein particle formation

Spontaneous interaction of purified apolipoproteins and phospholipids results in formation of lipoprotein particles with nanometer-sized dimensions; we refer to these assemblies as nanolipoprotein particles or NLPs. These bilayer constructs can serve as suitable mimetics of biological membranes and are fully soluble in aqueous environments. We made NLPs from dimyristoylphospatidylcholine (DMPC) in combination with each of four different apolipoproteins: apoA-I, Delta-apoA-I fragment, apoE4 fragment, and apolipophorin III (apoLp-III) from the silk moth B. mori. Predominately discoidal in shape, these particles have diameters between 10 and 20 nm, share uniform heights between 4.5 and 5 nm, and can be produced in yields ranging between 40 and 60%. The particular lipoprotein, the lipid to lipoprotein ratio, and the assembly parameters determine the size and homogeneity of nanolipoprotein particles and indicate that apoA-I NLP preparations are smaller than the larger apoE422K and apoLp-III NLP preparations.     

One-, two-, and three-dimensional organization of colloidal particles using nonuniform alternating current electric fields

We demonstrate here the use of nonuniform alternating current (AC) electric fields, generated by planar electrodes, for the organization of num-sized particles into one-, two-, and three-dimensional assemblies. The electrodes, with separations that vary from 35 to 300 num, are made of gold deposited on glass substrata. Latex, silica and graphite particles have been examined inside organic or aqueous media in order to illustrate the general applicability of the technique. Theoretical predictions of the particle response under the electric fields are experimentally confirmed for all the above particle/media combinations and can thus be used as a valuable design tool. The size and shape of the final structures are mainly dependent on the electrode shape and dimensions, but are also subject to the particle type and operating conditions. Particle organization in one dimension (strings) is achieved under conditions of positive or negative dielectrophoresis in the space between two energized electrodes. Two-dimensional particle organization (ordered, planar particles assemblies) was observed under conditions of negative dielectrophoresis, when quadrupole electrodes were employed. Moreover, when negative dielectrophoresis and stronger electric fields are applied (of the order of 50 kV(rms) m(-1)), three-dimensional, pyramid-like structures with a vertical dimension 1000-fold higher than that of the corresponding (planar) electrodes can be assembled. These 3-D structures can grow as free-standing assemblies, or inside templates etched in the substratum. The dielectrophoresis (DEP)-organized particle assemblies can subsequently be rendered permanent via the in situ fixing (cross-linking) of the individual particles.     

Hybridization chain reaction triggered controllable one-dimensional assembly of gold nanoparticles

Assembling and ordering nanomaterials into desirable patterns are considerably significant, since the properties of nanomaterials depend not only on the size and shape, but also on the spatial arrangement among the collective building blocks. In this work, the DNA self-assembly technology of hybridization chain reaction (HCR) provided a convenient method to yield long double-strand DNA (dsDNA) to install gold nanoparticles (AuNPs) into one dimensional assembly along the skeleton of dsDNA. Interestingly, the tunable length of AuNPs assemblies along dsDNA chain could be achieved by adjusting the reaction time of HCR, which is based on the formation of covalent bond between Au and the -SH group of DNA. Compared with weak light scattering of single AuNP, these AuNPs assemblies could be clearly imaged under the dark field microscopy, indicating that the light scattering was greatly improved after assembling.     

Size-selective template-assisted electrophoretic assembly of nanoparticles for biosensing applications

The precise, size-selective assembly of nanoparticles gives rise to many applications where the assembly of nano building blocks with different biological or chemical functionalizations is necessary. We introduce a simple, fast, reproducible-directed assembly technique that enables a complete sorting of nanoparticles with single-particle resolution. Nanoparticles are size-selectively assembled into prefabricated via arrays using a sequential template-directed electrophoretic assembly method. Polystyrene latex (PSL) nanoparticles with diameters ranging from 200 to 50 nm are selectively assembled into vias comparable to nanoparticle diameter. We investigate the effects of particle size and via size on the sorting efficiency. We show that complete sorting can be achieved when the size of the vias is close to the diameter of the nanoparticles and the size distribution of the chosen nanoparticles does not overlap. The results also show that it is necessary to keep the electric field on during the insertion and removal of the template. To elucidate the versatility and nil effects that the electrophoresis assembly technique has on the assembled nanoparticle characteristics, we have assembled cancer-specific monoclonal antibody-2C5-coated nanoparticles and have also shown that they can successfully measure low concentrations of the nucleosome (NS) antigen.     

Computational Design of Single-Peptide Nanocages with Nanoparticle Templating

Protein complexes perform a diversity of functions in natural biological systems. While computational protein design has enabled the development of symmetric protein complexes with spherical shapes and hollow interiors, the individual subunits often comprise large proteins. Peptides have also been applied to self-assembly, and it is of interest to explore such short sequences as building blocks of large, designed complexes. Coiled-coil peptides are promising subunits as they have a symmetric structure that can undergo further assembly. Here, an α-helical 29-residue peptide that forms a tetrameric coiled coil was computationally designed to assemble into a spherical cage that is approximately 9 nm in diameter and presents an interior cavity. The assembly comprises 48 copies of the designed peptide sequence. The design strategy allowed breaking the side chain conformational symmetry within the peptide dimer that formed the building block (asymmetric unit) of the cage. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) techniques showed that one of the seven designed peptide candidates assembled into individual nanocages of the size and shape. The stability of assembled nanocages was found to be sensitive to the assembly pathway and final solution conditions (pH and ionic strength). The nanocages templated the growth of size-specific Au nanoparticles. The computational design serves to illustrate the possibility of designing target assemblies with pre-determined specific dimensions using short, modular coiled-coil forming peptide sequences.     

Diastereoselective noncovalent synthesis of hydrogen-bonded double-rosette assemblies

Chiral centers present either in the dimelamine components of calix[4]arene 1 or in the cyanurate components CA quantitatively induce one handedness (P or M) in the corresponding hydrogen-bonded assemblies 1(3).(CA)(6) (de>98 %). The high degree of chiral induction results from the presence of six chiral centers in close proximity (C(alpha)) to the core of the assembly. A much lower level of chiral induction is observed for assemblies with chiral centers that are more remote (C(beta)). All diastereomerically pure assemblies 1(3).(CA)(6) exhibit very high CD activities (deltavarepsilon(max) approximately 100 L mol(-1) cm(-1)), in sharp contrast to the low CD activities (deltavarepsilon(max)相似文献   

Charge-driven flocculation of poly(L-lysine)-gold nanoparticle assemblies leading to hollow microspheres

An unusual aggregation phenomenon that involves positively charged poly(L-lysine) (PLL) and negatively charged gold nanoparticles (Au NPs) is reported. Discrete, submicrometer-sized spherical aggregates are found to form immediately upon combining a PLL solution with gold sol (diameter approximately 14 nm). These PLL-Au NP assemblies grow in size with time, according to light scattering experiments, which indicates a dynamic flocculation process. Water-filled, silica hollow microspheres (outer diameter approximately microns) are obtained upon the addition of negatively charged SiO2 NPs (diameter approximately 13 nm) to a suspension of the PLL-Au NP assemblies, around which the SiO2 NPs form a shell. Structural analysis through confocal microscopy indicates the PLL (tagged with a fluorescent dye) is located in the interior of the hollow sphere, and mostly within the silica shell wall. The hollow spheres are theorized to form through flocculation, in which the charge-driven aggregation of Au NPs by PLL provides the critical first step in the two-step synthesis process ("flocculation assembly"). The SiO2 shell can be removed and re-formed by decreasing and increasing the suspension pH about the point-of-zero charge of SiO2, respectively.