三乙基铝-乙酰基丙酮金属配合物-水配合体系引发对二氧环己酮(PDO)开环聚合的研究

近年来,生物降解材料受到了越来越广泛的关注．聚对二氧环己酮(PPDO)具有优异的生物相容性、生物可吸收性、生物降解性和良好的柔韧性,目前已被成功地应用于医用材料领域．而在环境材料如薄膜、板材、发泡材料等领域也具有广泛的应用前景．PPDO作为一种新材料,虽然早在20世纪70年代就已经合成出来,     

三氟甲磺酸稀土催化ε-己内酯开环聚合

采用三氟甲磺酸稀土(镧、钕、铒)作为单组分催化剂催化了ε-己内酯的本体开环聚合反应. 考察了稀土元素种类、催化剂浓度、聚合时间及温度对单体转化率和聚合产物分子量的影响. 该类催化剂在催化聚合过程中具有单一活性中心, 且催化活性较高. 此聚合反应可能是通过阳离子活性末端链聚合机理进行的.     

含钕聚合物的制备及荧光性质

用复分解的方法制备了辛酸钕[Nd(OCA)_3]和甲基丙烯酸钕[Nd(MAA)_3];将它们分别加入甲基丙烯酸甲酯和甲基丙烯酸的混合体系,聚合后得到交联的[含Nd(MAA)_3]和非交联的[含有Nd(OCA)_3]二种聚合物。研究了上述钕的有机酸盐和二种含钕聚合物的荧光性质。     

三(2,4,6-三甲基苯氧基)稀土配合物引发DL-丙交酯开环聚合特征与机理的研究

Tris(2,4,6-trimethylphenolate) lanthartide [Ln(OTMP)3] has been prepared and employed for ring-opening polymerization of D,L-lactide (LA) as single-component catalysts. The characteristics, kinetics and mechanism were examined. The polymerization is first-order with respect to monomer and initiator concentration, and the overall activation energy amounts to 62.9 kJ/mol. DSC curve disclosed the random structure of PLA. ^1H NMR spectrum analysis demonstrates that the polymerization of LA proceeded through acyl-oxygen bond cleavage.     

镧配位催化N-十八烷基马来酰亚胺均聚合

N-取代马来酰亚胺聚合物中的酰亚胺环为平面五元环结构,阻碍了酰亚胺单元绕聚合物主链的旋转,限制了聚合物主链的运动,使聚合物的热性能和化学稳定性得到了很大的提高．近些年来,有关N-取代马来酰亚胺均聚合研究的报道已经有很多,但大多采用自由基聚合方法和负离子聚合方法,采用配位催化聚合方法很少．     

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE BY CALIX[8]ARENE-NEODYMIUM*

Ring-opening polymerization of trimethylene carbonate (TMC) with a rare earth calixarene compound as catalysthas been studied for the first time. The effect of TMC/Nd (molar ratio) and polymerization conditions were investigated indetail. It was found that calix[8]arene-neodymium is a highly effective catalyst for the bulk polymerization of TMC and giveshigh molecular weight (M_v = 60,000) polymer. The optimum conditions of TMC polymerization were found to be asfollows:TMC/Nd (molar ratio) = 2,000, 80℃, 16 h. The polymers were characterized by NMR, GPC and DSC. Studying themechanism by NMR showed that the polymerization of TMC catalyzed by calix[8]arene-neodymium proceeds via a cationicmechanism.     

甲基丙烯酸丁酯的Nd（Oct）3—Al（i—Bu）3配合催化聚合

甲基丙烯酸丁酯(BMA)在2-乙基己酸钕[Nd(Oct)_3]和三异丁基铝[Al(i-Bu)_3]配合催化下的聚合反应结果表明。以正己烷和石油醚为溶剂的聚合转化率高于甲苯和四氢呋喃体系。4种不同配体的钕盐的聚合转化率差别不大。但是,以Nd(Oet)_3-Al(i-Bu)_3为催化剂时聚甲基丙烯酸丁酯的分子量最高。聚合反应速度与单体浓度和催化剂浓度均成一次方关系。甲基丙烯酸丁酯的聚合反应活化能为47.40kJ/mol。     

稀土膦酸酯盐-烷基铝体系催化正辛基异氰酸酯配位聚合

报道了由稀土膦酸酯盐-烷基铝组成的催化体系在温和条件下催化正辛基异氰酸酯(n-OctNCO)的配位聚合特征. 研究发现, 以Nd(P204)3/Al(i-Bu)3组成的稀土催化体系是正辛基异氰酸酯聚合的良好催化剂. 系统考察了正辛基异氰酸酯在该催化体系下的本体、溶液聚合的聚合规律和溶液聚合反应动力学. 用1H NMR, FTIR, DSC, TGA和GPC等分析测试手段对所得到的聚合物进行了表征.     

Nd（OPr~i）_2Cl－AlEt_3均相二元催化剂异戊二烯聚合动力学Ⅰ．一般动力学研究

用膨胀计研究了Ｎｄ（ＯＰｒｉ）２Ｃｌ－ＡｌＥｔ３均相稀土催化剂异戊二烯聚合动力学．在实验条件下，本体系显示稳态聚合特征；聚合速度对单体浓度和催化剂浓度均为一级关系，即聚合速度方程为Ｒｐ＝Ｋｐ［Ｎｄ］［Ｍ］；本体系总的活化能Ｅａ为５７．４ｋＪ／ｍｏｌ．     

New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.     

Styrene polymerization with rare earth catalysts using a magnesium alkyl cocatalyst

A new highly active rare earth coordination catalyst composed of rare earth phosphonate, di-n-butylmagnesium (MgBu), and hexamethyl phosphoramide (HMPA) for the polymerization of styrene has been developed for the first time. High molecular weight polystyrene (M̄_ν = 50–70 × 10⁴) in 100% conversion could be prepared at following conditions: [Nd] = 6–8 × 10⁻⁴ mol/L, [St] = 3.0 mol/L, Mg/Nd = 11, and HMPA/Mg = 1–1.5 (molar ratio). The catalytic activity of this new catalyst is 3530 g PSt/g Nd. Kinetics study shows that the polymerization rate is of first order with respect to both monomer concentration and catalyst concentration, and activation energy of the polymerization is 40.1 kJ/mol. © 1996 John Wiley & Sons, Inc.     

Cationic polymerization of L,L‐lactide

Cationic bulk polymerization of L ,L‐ lactide (LA) initiated by trifluromethanesulfonic acid [triflic acid (TfA)] has been studied. At temperatures 120–160 °C, polymerization proceeded to high conversion (>90% within ～8 h) giving polymers with M_n ～ 2 × 10⁴ and relatively high dispersity. Thermogravimetric analysis of resulting polylactide (PLA) indicated that its thermal stability was considerably higher than the thermal stability of linear PLA of comparable molecular weight obtained with ROH/Sn(Oct)₂ initiating system. Also hydrolytic stability of cationically prepared PLA was significantly higher than hydrolytic stability of linear PLA. Because thermal or hydrolytic degradation of PLA starting from end‐groups is considerably faster than random chain scission, both thermal and hydrolytic stability depend on molecular weight of the polymer. High thermal and hydrolytic stability, in spite of moderate molecular weight of cationically prepared PLA, indicate that the fraction of end‐groups is considerably lower than in linear PLA of comparable molecular weight. According to proposed mechanism of cationic LA polymerization growing macromolecules are fitted with terminal ? OH and ? C(O)OSO₂CF₃ end‐groups. The presence of those groups allows efficient end‐to‐end cyclization. Cyclic nature of resulting PLA explains its higher thermal and hydrolytic stability as compared with linear PLA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2650–2658, 2010     

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper, ring-opening polymerization of trimethylene carbonate (TMC) with rare earth (Nd, Y, La) p-tert-butylcalix[n]arene (n=4, 6, and 8) complexes as catalysts has been studied. Poly(trimethylene carbonate) (PTMC) with Mv of 21,400 was produced by bulk polymerization under the conditions as follows: [TMC]0/[Nd] (molar ratio)=1000,80℃,8h. Mechanism study reveals that the polymerization proceeds via a coordination mechanism.     

丙交酯开环均聚合

生物可降解脂肪族聚酯--聚丙交酯由可再生资源获得.聚丙交酯独特的物理性质使得它在包装、涂层、纤维、薄膜等方面有着广泛的应用.聚丙交酯低成本、大规模的生产及应用将极大地减轻对石油产品的依赖.高分子量的聚丙交酯主要由丙交酯开环聚合制备.本文总结了催化丙交酯开环聚合的3大类催化剂及其反应机理;综述了近年来国内外在丙交酯均聚合催化剂开发上的研究进展,并重点论述了稀土催化剂在丙交酯开环聚合中的优势及由其催化合成的聚丙交酯在生物学应用中的优点.     

Nd（OprI）2Cl－AlEt_3均相二元催化剂异戊二烯聚合动力学Ⅰ．一般动力学研究

用膨胀计研究了Ｎｄ（ＯＰｒ＾ｉ）２Ｃｌ－ＡｌＥｔ３均相稀土催化剂异戊二烯聚合动力学。在实验条件下，本体系显示稳态聚合特征；聚合速度对单体浓度和催化剂浓度均为一级关系，即聚合速度方程为Ｒｐ－Ｋｐ［Ｎｄ］［Ｍ］；本体系总的活化能Ｅａ为５７．４ｋＪ／ｍｏｌ。     

POLYMER-SUPPORTED RARE EARTH CATALYSTS FOR STYRENE POLYMERIZATION

The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10~(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Mechanism of living lactide polymerization by dinuclear indium catalysts and its impact on isoselectivity

A family of racemic and enantiopure indium complexes 1-11 bearing bulky chiral diaminoaryloxy ligands, H(NNO(R)), were synthesized and fully characterized. Investigation of both the mono- and the bis-alkoxy-bridged complexes [(NNO(R))InX](2)[μ-Y][μ-OEt] (5, R = (t)Bu, X = Y = Cl; 8, R = Me, X = I, Y = OEt) by variable temperature, 2D NOESY, and PGSE NMR spectroscopy confirmed dinuclear structures in solution analogous to those obtained by single-crystal X-ray crystallography. The dinuclear complexes in the family were highly active catalysts for the ring-opening polymerization (ROP) of lactide (LA) to form poly(lactic acid) (PLA) at room temperature. In particular, complex 5 showed living polymerization behavior over a large molecular weight range. A detailed investigation of catalyst stereoselectivity showed that, although (R,R/R,R)-5 is highly selective for l-LA, only atactic PLA is obtained in the polymerization of racemic LA. No such selectivity was observed for complex 8. Importantly, the selectivities obtained for the ROP of racemic LA with (R,R/R,R)-5 and (R,R/R,R)-8 are different and, along with kinetics investigations, suggest a dinuclear propagating species for these complexes.     

Poly(lactic acid) Polymerized by Aluminum Triflate

The ring-opening polymerization of L -lactide (LA) has been initiated by aluminum triflate (trifluoromethanesulfonate) in air using a simple glass tube at 100 °C without desiccation steps and stirring. It was found that the molecular weight of poly(lactic acid) (PLA) was increased by the addition of an alcohol as an initiator to the reaction mixture. The highest number averaged molecular weight, molecular weight distribution, and recovery of the obtained PLA at 100 °C for 6 h were 18,200, 1.20, and 73%, respectively. With the addition of a small percentage of alcohol and a long reaction time of the polymerization method with the re-addition of LA, PLA (ca. 80 wt%) with a higher molecular weight (ca. 30,000) initiated by the added alcohol was produced with PLA (ca. 20 wt%) with a lower molecular weight (ca. 2,000) initiated by impurities such as water, which exist in a monomer, initiator, or catalyst.     

Synthesis and characterization of highly random copolymer of ϵ-caprolactone and D,L-lactide using rare earth catalyst

Highly random copolymers of ϵ-caprolactone (CL) and D ,L -lactide (LA) were synthesized by a new catalyst system, rare earth chloride–propylene oxide (PO) system. In the presence of propylene oxide, all rare earth chlorides tested are highly effective for the copolymerization. The influences of reaction conditions on the copolymerization catalyzed by the NdCl₃-5PO system have been investigated in detail. The reactivity ratios of ϵ-caprolactone and D ,L -lactide were determined and show that the copolymerization with this new rare earth catalyst is closer to ideal copolymerization than reported for other catalysts. The microstructure of copolymer analyzed by ¹³C-NMR shows that the monomer units in the copolymer is near to completely random distribution with a short average monomer sequence length. The DSC measurement confirms the high randomness of the chain structure. The mechanism studied by NMR indicates that the rare earth alkoxide generated by the reaction of rare earth chloride with propylene oxide initiates the copolymerization, and then proceeds via a “coordination-insertion” mechanism with acyl-oxygen bond cleavage of CL and LA. © 1996 John Wiley & Sons, Inc.