Thermoanalytical Study of O,O'-Dibenzoyl-(2r,3r)-tartaric Acid; Part III. SMC-s formation with chiral secondary alcohols

The enantioselectivity of the diastereomeric supramolecular compound (SMC) formation between O,O'-dibenzoyl-(2R,3R)-tartaric acid (DBTA) and chiral secondary alcohols was investigated. On the basis of TG measurements the DBTA:chiral alcohol molar ratio in the SMC-s is nearly 1:1. Among the investigated complexes the most stable SMC is trans-2-iodo-cyclohexanol-DBTA. The SMC forming capability and the enantioselectivity depends on the space filling of the alcohol side chain or ring. In the case of trans-2-halogen-cyclohexanols a relationship can be observed between the thermal stability of the SMC-s and the enantioselectivity of SMC forming. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermoanalytical Study of O,O'-Dibenzoyl-(2R,3R)-Tartaric Acid Supramolecular Compounds. Part I. Investigation of compounds with water, achiral alcohols and phenols

Thermal behaviour of O,O'-dibenzoyl-(2R,3R)-tartaric acid (DBTA), its monohydrate, and its potential supramolecular compounds with achiral alcohols and phenols were investigated with TG, DSC, EGD. The structural differences among the anhydrous DBTA, its monohydrate, and the supramolecular derivatives were investigated with X-ray powder diffraction. The thermal behaviour of DBTA-supramoleculars with isopropyl, tert-butyl, and 5-cyclohexyl alcohols is found to be similar to each other but essentially different from that of both DBTA and its monohydrate. On heating they melt and decompose between 60–180°C while they loose in one or two steps the bound alcohol. The thermal stability of the supramolecular compounds increases with the boiling point of the alcohol component. According to the X-ray powder diffraction patterns each supramolecular substance has different structure, that may also result in the different thermal stability of the compounds. The molar ratio of DBTA:achiral alcohol samples is 1:1.01–1:1.57 estimated from the corresponding mass losses. The XRD patterns of the prepared two DBTA-phenol materials are different from those of DBTA-achiral alcohol samples. The phenol compounds melt with slow mass losses and give an endothermic peak between 73–83°C but the melting point of the anhydrous DBTA cannot be observed. DBTA:phenol molar ratio is estimated to be 1:0.41 and 1:0.65 for phenol and 2-methylphenol, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Resolution of N-methylamphetamine enantiomers with tartaric acid derivatives by supercritical fluid extraction

The resolution of N-methylamphetamine (MA) was carried out with the resolution agents O,O′-dibenzoyl-(2R,3R)-tartaric acid monohydrate (DBTA) and O,O′-di-p-toluoyl-(2R,3R)-tartaric acid (DPTTA). After partial diastereomeric salt formation, the unreacted enantiomers were extracted by supercritical fluid extraction (SFE). The effects of resolution agent molar ratio to the racemic mixture (mr), extraction pressure (P) and temperature (T) on the resolution efficiency were studied. The best chiral separation was obtained at a quarter of an equivalent resolution agent molar ratio for both resolution agents. Extraction conditions [pressure (100–200 bar), temperature (33–63 °C)] did not influence the resolution efficiency, which makes the enantiomer separation robust. In one extraction step, both enantiomers can be produced with high enantiomeric excess (ee) and remarkable yield (Y). Using DBTA as a resolution agent ee_E=83%, Y_E=45% for the extract and ee_R=82%, Y_R=42% for the raffinate were obtained.     

Thermoanalytical Study of O,O'-Dibenzoyl-(2R,3R)-Tartaric Acid Supramolecular Compounds Part II. Investigation of the resolution of racemic alcohols

The resolution of three chiral alcohols with O,O'-dibenzoyl-(2R,3R)-tartaric acid (DBTA) via diastereoisomeric supramolecular compound formation was investigated with thermoanalytical methods. On the basis of TG measurements the DBTA:chiral alcohol molar ratio in the compounds is 1:1 which agrees with the results of single-crystal X-ray diffraction analysis. The DBTA – chiral alcohol supramolecular compounds have different supramolecular structure than the DBTA – achiral alcohol supramolecular compounds. The supramolecular compounds containing cyclohexanols have higher thermal stability than the compounds containing acyclic aliphatic alcohols. The amount of unreacted DBTA monohydrate in the solid phase can be determined both with DSC and with TG measurements. This revised version was published online in August 2006 with corrections to the Cover Date.     

(R)‐Mandelic acid (S)‐alanine hemihydrate

Crystals of the title complex, C₃H₇NO₂·C₈H₈O₃·0.5H₂O, were obtained from an aqueous solution containing racemic mandelic acid and (S)‐alanine. The unit cell includes two independent molecular complexes and one water molecule. The structure formed by (R)‐mandelic acid and (S)‐alanine in a 1:1 molar ratio shows the successful optical separation of racemic mandelic acid. Strong hydrogen bonding, with a rather short O?O separation of 2.494 (3) Å, is observed between the carboxyl and carboxyl­ate groups. A structural comparison suggests that the strong hydrogen bonding affects the neighbouring covalent bond.     

Markierte Vertreter eines möglichen Zwischenprodukts der Biosynthese von Fosfomycin inStreptomyces fradiae: Darstellung von (R,S)-(2-Hydroxypropyl)-, (R,S)-, (R)-, (S)-(2-Hydroxy-[1,1-2H2]propyl)-und (R,S)-(2-[18O]Hydroxypropyl)phosphonsäure

Summary Racemic methyl O-benzyllactate was reduced to the alcohol, transformed into the bromide and reacted with triethylphosphite to give the diethylphosphonate. Removal of protecting groups afforded a phosphonic acid which was purified as its cyclohexylammonium salt. (S)-Ethyl and (R)-isobutyl O-benzyllactate were reduced with LiAlD₄ to the corresponding dideuteriated alcohols, which were transformed in the same way as the racemic compound into the chiral (2-hydroxy-[1,1-²H₂]propyl)phosphonic acids. The optical purity of alcohols (S)- and (R)-6 b was determined by derivatisation with (+)-MTPA-Cl and¹H-NMR-spectroscopy to be 98%. Exchange of the carbonyl-16-oxygen atom of 2-oxopropylphosphonate for oxygen-18 from H₂ ¹⁸O, reduction with NaBH₄, deprotection and addition of cyclohexylamine yielded the salt (±)-18 of (2-[¹⁸O]hydroxypropyl)phosphonic acid.

     

Tolterodinium (+)‐(2R,3R)‐hydrogen tartrate

In the crystal structure of (R)‐N,N‐diisopropyl‐3‐(2‐hydroxy‐5‐methyl­phenyl)‐3‐phenyl­propyl­aminium (2R,3R)‐hydrogen tartrate, C₂₂H₃₂NO⁺·C₄H₅O₆⁻, the hydrogen tartrate anions are linked by O—H⋯O hydrogen bonds to form helical chains built from (9) rings. These chains are linked by the tolterodine molecules via N—H⋯O and O—H⋯O hydrogen bonds to form separate sheets parallel to the (101) plane.     

A crystallization-induced asymmetric transformation to prepare (R)-4-chlorophenylalanine methyl ester

A second order asymmetric transformation of racemic 4-chlorophenylalanine methyl ester was achieved via salt formation with (2S,3S)-(−)-tartaric acid in the presence of salicylaldehyde to afford the desired (R)-enantiomer of 4-chlorophenylalanine methyl ester in good yield and high enantiomeric purity.     

Polymeric and monomeric dipicolinate complexes with 4-hydroxymethyl pyridine: spectral, structural, thermal and electrochemical characterization

Polymeric copper(II), [Cu(μ-dpc)(μ-4-hymp)] _n (1), and monomeric nickel(II), [Ni(dpc)(4-hymp)(H₂O)₂]·H₂O (2), (dpc: dipicolinate, 4-hymp: 4-hydroxymethyl pyridine), dipicolinate complexes have been prepared and characterized by spectroscopic (IR, UV–Vis, EPR), thermal (TG/DTA), X-ray diffraction technique and electrochemical methods. In both the dipicolinate complexes, the dpc dianion acts as a tridentate ligand. In polymeric copper(II) complex, the 4-hymp and dpc ligands adopt a bridging position between the Cu(II) centers, forming the elongated octahedral geometry. The polymeric chains are linked to one another via O–H···O hydrogen bond interactions, forming the 3-D polymeric structure. The Ni(II) ion is bonded to dpc ligand through pyridine N atom together with one O atom of each carboxylate group, two aqua ligands and N pyridine atom of 4-hymp, forming the distorted octahedral geometry. The Ni(II) complexes are connected to one another via O–H···O hydrogen bonds, forming R ₄²(18) motifs in 2-D pattern. The powder EPR spectra of copper(II) complex have indicated that the paramagnetic center is in rhombic symmetry with the Cu²⁺ ion having distorted octahedral geometry. IR and UV–Vis spectroscopes all agree with the observed crystal structure.     

Synthesis,characterization, and structure of a new cobalt(II) Schiff-base complex with quinoxaline- 2-carboxalidine-2-amino-5-methylphenol

The mononuclear cobalt(II) complex [CoL₂] · H₂O (where HL is quinoxaline-2-carboxalidine-2-amino-5-methylphenol) has been prepared and characterized by elemental analysis, conductivity measurement, IR, UV-Vis spectroscopy, TG?DTA, and X-ray structure determination. The crystallographic study shows that cobalt(II) is distorted octahedral with each tridentate NNO Schiff base in a cis arrangement. The crystal exhibits a 2-D polymeric structure parallel to [010] plane, formed by O?H ··· N and O?H ··· O intermolecular hydrogen bonds and π?π stacking interactions, as a racemic mixture of optical enantiomers. The ligand is a Schiff base derived from quinoxaline-2-carboxaldehyde.     

Syntheses, crystal structures and spectral properties of three chiral complexes [M((R, R)-et-pybox)Cl2] (M=Zn and Mn) and [Ni((R, R)-et-pybox)(H2O)2Cl]Cl

Three chiral complexes: [M((R, R)-et-pybox)Cl₂] (M=Zn, 1, and Mn, 2) and [Ni((R, R)-et-pybox)(H₂O)₂Cl]Cl (3) ((R, R)-et-pybox is C₂-symmetric 2,6-bis[4′-(R)-ethoxyoxazolin-2′-yl]pyridine) have been synthesized and characterized by elemental analysis, IR, UV, TG and single-crystal X-ray diffraction. Single-crystal X-ray diffraction analyses show that 1 is isostructural to 2, the obtained complexes are of isolated mononuclear and the metal atoms of 1 and 2 have distorted trigonal bipyramidal coordination environment. A feature of interest is noted in the unit cell of 3, there exist two types of molecules, which similarly have a distorted octahedral geometry but only slightly differ in the orientation of the coordinated atoms to the central Ni atom. These two types of molecules interact with each other by O–H···Cl hydrogen bonds, giving rise to one-dimensional ribbon structure.     

NMR.-spektroskopische Methoden als Reinheitskriterien isomerer Weinsäuren und Weinsäureester

NMR.-spectroscopic Methods as Criteria of the Purity of Isomeric Tartaric Acids and Their Esters meso-Tartaric acid ( 2 ) can be distinguished either from the natural (+)-(2R, 3R)-tartaric acid ( 1 ) or the ‘unnatural’ (?)-(2S, 3S)-tartaric acid ( 1 ′) or their racemic mixture, by ¹H-NMR.-spectral resolution using europium chloride in aqueous solution. Diastereomeric esters have been prepared from different esters of tartaric acid 3 and the Mosher reagent 4 and the purities of the enantiomers of 3 have been checked by ¹H-NMR. spectroscopy.     

A new [(1R,2R)‐1,2‐diaminocyclohexane]platinum(II) complex: formation by nitrate–acetonitrile ligand exchange

The title compound, cis‐diacetonitrile[(1R,2R)‐1,2‐diaminocyclohexane‐κ²N,N′]platinum(II) dinitrate monohydrate, [Pt(C₂H₃N)₂(C₆H₁₄N₂)](NO₃)₂·H₂O, is a molecular salt of the diaminocyclohexane–Pt complex cation. There are two formula units in the asymmetric unit. Apart from the two charge‐balancing nitrate anions, one neutral molecule of water is present. The components interact via N—H...O and O—H...O hydrogen bonds, resulting in supramolecular chains. The title compound crystallizes only from acetonitrile with residual water, with the acetonitrile coordinating to the molecule of cis‐[Pt(NO₃)₂(DACH)] (DACH is 1,2‐diaminocyclohexane) and the water forming a monohydrate.     

Three Cu(II) (R)-2-chloromandelato complexes generated from dipyridyl-type ligands with different spacer lengths: syntheses,crystal structures,and ferroelectric properties

Three Cu(II) complexes, Cu₂(bpy)(H₂O)(Clma)₂ (1), Cu₂(bpe)(H₂O)₂(Clma)₂ (2), and Cu(bpp)(Clma) (3), were synthesized (HClma = (R)-2-Chloromandelic acid, bpy?=?4,4′-dipyridine, bpe?=?1,2-di(4-pyridyl)ethylene, bpp?=?1,3-di(4-pyridyl)propane). Complexes 1, 2, and 3 are constructed from 1-D coordination arrays generated from Cu₂(H₂O)(Clma)₂, Cu₂(H₂O)₂(Clma)₂, and Cu₂(Clma)₂ moieties and linked through bpy, bpe, and bpp co-ligands, respectively. 1 and 2 are assembled into 3-D supramolecular networks via O–H?O hydrogen bonds with topology of (6³)(6⁹·8) and (4¹²·6³), respectively, and 3 is assembled into a 3-D architecture through C–H?O hydrogen bonds with topology of (4³·6³)(4³)(4⁴·6⁵·8)(4⁶·6⁶·8³). Compounds 1, 2, and 3 crystallized in acentric space groups P2₁, P1, and P2₁, which exhibit significant ferroelectricity (remnant polarization Pr?=?0.008?μC?cm^?2, coercive field Ec?=?21.4?kV?cm^?1, the spontaneous saturation polarization Ps?=?0.167?μC?cm^?2 for 1, Pr?=?0.183?μC?cm^?2, Ec?=?1.69?kV?cm^?1, and Ps?=?0.021 μC?cm^?2 for 3). Results from infrared and thermal analyses are also discussed.     

Asymmetric Reduction Using Lithium Aluminum Hydride Modified with Chiral Ligands Prepared from (1R)-(-)-β-Pinene

The reduction of prochiral ketones using chiral reducing reagents, prepared from lithium aluminum hydride and (-)-(1R, 2S, 3S, 5R)-10-anilinopinanediol (5) and (-)-(1R, 2S, 3S, 5R)-10-N-methylanilinopinanediol (6), affords chiral secondary alcohols in useful chemical yields (70 ～ 93%) but in low optical purity (8 ～ 33% ee). Modifiers 5 and 6 are synthesized from (lR)-(-)-β-pinene in three steps.     

Enantioselective Extraction System Containing Binary Chiral Selectors and Chromatographic Enantioseparation Method for Determination of the Absolute Configuration of Enantiomers of Cyclopentolate

The distribution coefficients and enantioseparation of cyclopentolate were studied in an extraction system containing d-tartaric acid ditertbutyl ester in organic phase and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) in aqueous phase. Various parameters involved in the enantioseparation such as the type and the concentration of chiral selectors, pH value and a wide range of organic solvents were investigated. The maximum enantioselectivity (α = 2.13) and optimum distribution coefficients (K _R = 0.85, K _S = 0.40) were obtained under the following conditions: 0.10 mol/L HP-β-CD in aqueous phase and 0.20 mol/L d-tartaric acid ditertbutyl ester in decanol as organic phase. Cyclopentolate is present as a racemic mixture to the aqueous phase. The potentially different biological activities of cyclopentolate enantiomers have not been examined yet. Two chiral liquid chromatography methods have been developed for the direct separation of the enantiomers of cyclopentolate. First method was used for the quantification analysis of cyclopentolate enantiomers in aqueous phase. Second method used two chiroptical detectors: electronic circular dichroism (ECD) and optical rotation (OR) for the identification of individual cyclopentolate enantiomers from the organic phase enriched with (R)-enantiomer. The absolute stereochemistry was determined by means of the comparison of the experimental and computed ECD spectra and signs of OR. The ECD spectra of chiral analytes were measured on-line using HPLC-ECD technique.

     

Complexes of the Triolide from (R)-3-Hydroxybutanoic Acid with Sodium,Potassium, and Barium Salts: Crystal Structures,Ester Chelates and Ester Crowns,Crystal Packing,Bonding, and Electron-Localization Functions

The triolide of (R)-3-hydroxybutanoic acid ((R,R,R,))-3,7,11-trimethyl-2,6,10-trioxadodecane-1,5,9-trione; ( 1 ), readily available from the corresponding biopolymer P(3-HB) in one step, forms crystalline complexes with alkali and alkaline earth salts. The X-ray crystal structures of three such complexes, (3 NaSCN)·4 1 ( 2 ), (2 KSCN)·2 1 · H₂O ( 3 ), and (2) Ba(SCN)₂ · 2 1 · 2 H₂O · THF ( 4 ), have been determined and are compared. The triolide is found in these structures (i) as a free molecule, making no contacts with a cation (clathrate-type inclusion), (ii) as a monodentate ligand coordinated to a single ion with one carbonyl O-atom only, (iii) as a chelator, forming an eight-membered ring, with two carbonyl O-atoms attached to the same ion, (iv) as a linker, using two carbonyl O-atoms to bind to the two metals of an ion-X-ion unit (ten-membered ring), and (v), in a crown-ester complex, in which an ion is sitting on the three unidirectional C?O groups of a triolide molecule (Figs. 1–3). The crystal packing is such that there are columns along certain axes in the centers of which the cations are surrounded by counterions and triolide molecules, with the non-polar parts of 1 on the outside (Fig. 4). In the complexes 2–4 , the triolide assumes conformations which are slightly distorted, with the carbonyl O-atoms moved closer together, as compared to the ‘free’ triolide 1 (Fig. 5). These observed features are compatible with the view that oligo (3-HB) may be involved in the formation of Ca polyphosphate ion channels through cell membranes. A comparison is also made between the triolide structure in 1–4 and in enterobactin, a super Fe chelator (Fig. 5). To better understand the binding between the Na ion and the triolide carbonyl O-atoms in the crown-ester complex, we have applied electron-localization function (ELF) calculations with the data set of structure 2 , and we have produced ELF representations of ethane, ethene, and methyl acetate (Figs. 6–9). It turns out that this theoretical method leads to electron-localization patterns which are in astounding agreement with qualitative bonding models of organic chemists, such as the ‘double bond character of the CO? OR single bond’ or the ‘hyperconjugative n → σ* interactions between lone pairs on the O-atoms and neighbouring σ-bonds’ in ester groups (Fig. 8). The noncovalent, dipole/pole-type character of bonding between Na⁺ and the triolide carbonyl O-atoms in the crown-ester complex (the Na? O?C plane is roughly perpendicular to the O? C?O plane) is confirmed by the ELF calculation; other bonding features such as the C?N bond in the NaSCN complex 2 are also included in the discussion (Fig. 9).     

Optical Resolution ofα-Bromo-2-Chlorophenacetic Acid by Way of Coordination with Copper(II) and O,O’-Dibenzoyltartaric Acid

Optically active molecules play important roles in medicinal chemistry and materials science in both industrial and academic sectors. Resolution is one of the most efficient ways to obtain enantiopure substances. For a long period, racemic carboxylic acids are generally resolved by optically active bases, however, these bases are often extremely toxic and expensive.[1] Recently, A. Mravik Group applied optically active O, O’-dibenzoyltartaric acid (DBTA), which is usually used for the res…     

The molecular and crystal structure of N-(4-n-butyloxybenzylidene)-4′-ethylaniline (4O.2) and N-(4-n-heptyloxybenzylidene)-4′-hexylaniline (7O.6)

Abstract

The molecular and crystal structure of N-(4-n-butyloxybenzylidene)-4′-ethylaniline (4O.2) and the homologue N-(4-n-heptyloxybenzylidene)-4′-hexylaniline (7O.6) have been solved (at room temperature) by direct methods. The crystals of both compounds belong to the triclinic system with space group P1 with two molecules per unit cell. 4O.2: a = 5·531(2), b = 7·592(3), c = 19·746(7) Å, α = 86·66(2), β = 88·15(2), γ = 90·29(2)° 7O.6: a = 5·420(2), b = 8·307(3), c = 28·057(7) Å, α = 91·69(2), β = 89·76(2), γ = 108·02(2)°. The structures were refined by full-matrix least-squares calculations to R = 0·036 for 2297 observed reflections for 4O.2 and to R = 0·037 for 2150 reflections for 7O.6. The conformations in the asymmetric units of the two compounds differ considerably: The planes of the two phenyl rings of 4O.2, forming the mesogenic core of the molecule, are twisted at 61·2° to each other and the butoxy group contains a gauche conformation. In contrast the heptoxy chain of 7O.6 forms an all trans-conformation which lies almost in one plane with the two coplanar phenyl rings. The hexyl group also exists in an extended form, in a plane which is rotated against the plane of the mesogenic unit. The packing in the crystalline state of the two homologues exhibits a layered structure along c*; in 4O.2 these layers are separated, but in 7O.6 they are interdigitated. The compensation of the dipole moments of the C?O?C and C?N?C bonds occurs similarly in both structures: molecular orientations parallel to the a, c-plane in which the long axes of the molecules points in the same direction are packed in antiparallel fashion along b*.     

Charge‐assisted hydrogen‐bonded supramolecular networks in acetoguanaminium hydrogen phthalate,acetoguanaminium hydrogen maleate and acetoguanaminium 3‐hydroxypicolinate monohydrate

In 2,4‐diamino‐6‐methyl‐1,3,5‐triazin‐1‐ium (acetoguanaminium) hydrogen phthalate, C₄H₈N₅⁺·C₈H₅O₄⁻, (I), acetoguanaminium hydrogen maleate, C₄H₈N₅⁺·C₄H₃O₄⁻, (II), and acetoguanaminium 3‐hydroxypicolinate monohydrate, C₄H₈N₅⁺·C₆H₄NO₃⁻·H₂O, (III), the acetoguanaminium cations interact with the carboxylate groups of the corresponding anions via a pair of nearly parallel N—H...O hydrogen bonds, forming R₂²(8) ring motifs. In (II) and (III), N—H...N base‐pairing is observed, while there is none in (I). In (II), a series of fused R₃²(8), R₂²(8) and R₃²(8) hydrogen‐bonded rings plus fused R₂²(8), R₆²(12) and R₂²(8) ring motifs occur alternately, aggregating into a supramolecular ladder‐like arrangement. In (III), R₂²(8) motifs occur on either side of a further ring formed by pairs of N—H...O hydrogen bonds, forming an array of three fused hydrogen‐bonded rings. In (I) and (II), the anions form a typical intramolecular O—H...O hydrogen bond with graph set S(7), whereas in (III) an intramolecular hydrogen bond with graph set S(6) is formed.