As an emerging technology device, Quantum-dot cellular automata (QCA) may be a suitable substitute for traditional semiconductor transistor technology. Arithmetic logic unit in field-coupled QCA has been also studied extensively in recent year. In this paper, the new low-power Exclusive-OR gate is presented, which is mainly based on QCA cellular leveled format. This Exclusive-OR gate can be used to design various useful QCA circuits. By using this gate, we design and implement a novel full adder circuit with low dissipation. The circuit is designed using only 45 normal cells in a single layer without crossover. Compared with previous designs, both decimal adders achieve better performance in terms of latency and overall cost. The operation of the proposed circuit has been verified by QCADesigner version 2.0.3 and energy dissipation investigated by QCAPro tool. We also compared with previous designs in terms of power dissipation, cell-counts, area, latency and cost. The proposed full adder has the smallest area with less number of cells. And the total energy dissipation of our proposed full adder are only 0.05112 eV, 0.07454 eV and 0.10181 eV when tunneling energy levels are 0.5 Ek, 1 Ek and 1.5 Ek, respectively. The proposed single full adder also has the lowest total energy dissipation with a reduction of 20.94, 11.25 and 4.82% in 0.5 Ek, 1 Ek and 1.5 Ek tunneling energy levels, respectively when compared with the previous most power-efficient design.
相似文献Quantum dot cellular automata (QCA) is one of the nano-scale computing paradigms which promises high speed and ultra-low power consumption. Since the one-bit full adder is a fundamental building block of arithmetic circuits, designing an efficient QCA full adder cell is very imperative in this new technology. In this paper, we propose a QCA full adder using a new inverter gate which leads to reduced complexity and area occupation. The proposed layout is simulated by the QCA designer engines. We also provide a performance comparison of our proposed QCA full adder with the previous relevant designs. Furthermore, a detailed analysis of energy dissipation is performed which demonstrates the superiority of the proposed design in terms of the energy efficiency.
相似文献The novel emerging technology, QCA technology, is a candidate for replacing CMOS technology. Full Adder (FA) circuits are also widely used circuits in arithmetic circuits design. In this paper, two new multilayer QCA architectures are presented: one-bit FA and 4-bit Ripple Carry Adder (RCA). The designed one-bit multilayer FA architecture is based on a new XOR gate architecture. The designed 4-bit multilayer QCA RCA is also developed based on the designed one-bit multilayer QCA FA. The functionality of the designed architectures are verified using QCADesigner tool. The results indicate that the designed architecture for 4-bit multilayer QCA RCA requires 5 clock phases, 125 QCA cells, and 0.17 μm2 area. The comparison results confirm that the designed architectures provide improvements compared with other adder architectures in terms of cost, cell count, and area.
相似文献The difficulties which the CMOS technology is facing at the nano scale has led to the investigation of quantum-dot cellular automata (QCA) nanotechnology and reversible logic as an alternative to conventional CMOS technology. In this paper, these two paradigms have been combined. Firstly, a new 3 × 3 reversible gate, SSG-QCA, which is universal and multifunctional in nature, is proposed and implemented in QCA using conventional 3-input majority voter based logic. By using the concept of explicit interaction of cells, the proposed gate is further optimized and then used to design an ultra-efficient 1-bit full adder in QCA. The universal nature has been verified by designing all the logic gates from the proposed SSG-QCA gate whereas the multifunctional nature is verified by implementing all the 13 standard Boolean functions. The proposed 3 × 3 gate and adder designs are then extensively compared with the existing literature and it is observed that the proposed designs are ultra-efficient in terms of both area and cost in QCA technology. In addition to this energy dissipation analysis for different scenarios is also done on all the designs and it is observed that the proposed designs dissipate minimum energy thereby making them suitable for ultra-low power designs.
相似文献Quantum-dot cellular automata (QCA) nanotechnology is emerging as a replacement technique for maintaining increasing microprocessor performance and it yields small size, high speed, and low power consumption. On the other hand, a multiplier is a circuit that multiplies two binary values for performing sequential addition operations and accumulating the results. This type of circuit is the basic structural unit of many arithmetic logical units, digital signal processing, and communication system. The multiplier circuit contains some full adders that can perform add operations, so, it is very important that low-complexity full adders are used. Therefore, in this paper, a new 2 × 2 array multiplier circuit in QCA by employing an efficient structure of full adder is designed and implemented. This design is constructed using coplanar layouts and compared its performance with existing QCA multipliers. The operation and efficiency of the proposed structure have been confirmed using QCADesigner tool. The simulation results have demonstrated that the 2 × 2 multiplier leads to less cell count and area as the prime designing factors.
相似文献Quantum-dot Cellular Automata (QCA) is novel prominent nanotechnology. It promises a substitution to Complementary Metal–Oxide–Semiconductor (CMOS) technology with a higher scale integration, smaller size, faster speed, higher switching frequency, and lower power consumption. It also causes digital circuits to be schematized with incredible velocity and density. The full adder, compressor, and multiplier circuits are the basic units in the QCA technology. Compressors are an important class of arithmetic circuits, and researchers can use quantum compressors in the structure of complex systems. In this paper, first, a novel three-input multi-layer full-adder in QCA technology is designed, and based on it, a new multi-layer 4:2 compressor is presented. The proposed QCA-based full-adder and compressor uses an XOR gate. The proposed design offers good performance regarding the delay, area size, and cell number comparing to the existing ones. Also, in this gate, the output signal is not enclosed, and we can use it easily. The accuracy of the suggested circuits has been assessed with the utilization of QCADesigner 2.0.3. The results show that the proposed 4:2 compressor architecture utilizes 75 cell and 1.25 clock phases, which are efficient than other designs.
相似文献Multiple valued quantum logic is a promising research area in quantum computing technology having several advantages over binary quantum logic. Adder circuits as well as subtractor circuits are the major components of various computational units in computers and other complex computational systems. In this paper, we propose a quaternary quantum reversible half-adder circuit using quaternary 1-qudit gates, 2-qudit Feynman and Muthukrishnan-Stroud gates. Then we propose a quaternary quantum reversible full adder and a quaternary quantum parallel adder circuit. In addition, we propose a quaternary quantum reversible parallel adder/subtractor circuit. The proposed designs are compared with existing designs and improvements in terms of hardware complexity, quantum cost, number of constant inputs and garbage outputs are reported.
相似文献Power dissipation problem is one of the most challenging problems in designing conventional electronic circuits. One of the best approaches to overcome this problem is to design reversible circuits. Nowadays, reversible logic is considered as a new field of study that has various applications such as optical information processing, design of low power CMOS circuits, quantum computing, DNA computations, bioinformatics and nanotechnology. Due to the vulnerability of the digital circuits to different environmental factors, the design of circuits with error-detection capability is considered a necessity. Parity preserving technique is known as one of the most famous methods for providing error-detection ability. Multiplication operation is considered as one of the most important operations in computing systems, which can play a significant role in increasing the efficiency of such systems. In this paper, two efficient 4-bit reversible multipliers are proposed using the Vedic technique. The Vedic technique is able to increase the speed of multiplication operation by producing partial products and their sums simultaneously in a parallel manner. The first architecture lacks the parity preserving potential, while the second architecture has the ability parity preserving. Since a 4-bit Vedic multiplier includes 2-bit Vedic multipliers and 4-bit ripple carry adders (RCA), so in the first design, TG, PG and FG gates have been used to design an efficient 2-bit reversible Vedic multiplier, as well as PG gate and HNG block have been applied as a half-adder (HA) and full-adder (FA) in the 4-bit RCAs. Also, in the second design, 2-bit parity preserving reversible Vedic multiplier has been designed using FRG, DFG, ZCG and PPTG gates as well as ZCG and ZPLG blocks have been utilized as HA and FA in the 4-bit RCAs. Proposed designs are compared in terms of evaluation criteria of circuits such as gate count (GC), number of constant inputs (CI), number of garbage outputs (GO), quantum cost (QC), and hardware complexity. The results of the comparisons indicate that the proposed designs are more efficient compared to available counterparts.
相似文献The quantum-dot cellular automata (QCA) were highly regarded due to its high operating frequency and significantly low power consumption. One of the most useful circuits in processors architecture is counter. This paper presents effective designs and arrangement of QCA based counter-circuits. In this study new counter circuits in QCA technology are designed and precise simulation are done using the QCADesigner. Three, four and five bits counters are proposed in this paper in QCA technology. A comparison is made between the past and recent designs to illustrate which method is better and more efficient in terms of area, complexity, number of cells, and delay. For example, the proposed three bit shift register has 174 quantum cells, 0.2μm2 occupied area and three QCA clock cycles delay.
相似文献One of the emerging technology that can be used for replacing CMOS technology is Quantum-dot Cellular Automata (QCA) technology. Counter circuits are widely used circuits in the design of digital circuits. This paper presents and evaluates circuits for 2-, 3-, 4-, and 5-bit coplanar counter in the QCA technology. The designed QCA coplanar counter circuits are based on the modified D-Flip-Flop (D-FF) circuit that is designed in this paper. The designed QCA circuits are implemented and verified by using QCADesigner tool version 2.0.3. The results show that the designed circuits for 2-, 3-, 4-, and 5-bit coplanar counter contain 44 (0.03 μm2), 93 (0.07 μm2), 160 (0.13 μm2), and 245 (0.2 μm2) quantum cells (area). The comparison results indicate that the designed circuits have advantages compared to other QCA circuits in terms of cost, area, and cell count.
相似文献