X波段高功率微波TE11模圆极化器

 基于圆波导TE₁₁模的模式简并特性和微波在椭圆波导中传输两个正交TE11模式相速不同的性质,研制了一种带有椭圆波导结构的圆波导TE₁₁模圆极化器。该圆极化器通过圆波导到椭圆波导的过渡段,将输入的线极化TE₁₁模式分成两个等幅、正交的TE₁₁模,然后调整椭圆波导长度,使得两个正交的TE₁₁模式的相位差为90°,实现了TE₁₁模式微波线极化到圆极化的转换。利用时域有限差分软件优化设计了该圆极化器,并按照优化的结构尺寸加工了一套实验装置进行了实验测试,测试结果表明：在工作频率9～10 GHz范围内,该圆极化器轴比小于1 dB,驻波比小于1.1,且功率容量大于1.6 GW。     

Dual-core leaky optical waveguide as an integrated-optic polarizer

We present a design of a dual-core leaky waveguide that can be used as an integrated-optic polarizer. The proposed polarizer works on the principle of mode filtering. The structure is characterized by two cores, namely core-1 and core-2 and a high index layer in the upper-most region, such a structure supports leaky modes. The leakage losses of the modes have been calculated by using the transfer matrix method (TMM). Single polarization operation is ensured by high differential leakage loss between fundamental TE and TM modes. We show TE-pass operation with 0.5 dB/mm loss in TE₀ mode and 13 dB/mm loss in TM₀ mode, and TM-pass operation with 0.36 dB/mm loss in TM₀ mode and 7.45 dB/mm loss in TE₀ mode. Besides single-polarization operation, single-mode operation of the structure is ensured by high leakage loss of all the other higher-order modes.     

High extinction ratio metal-insulator-semiconductor waveguide surface plasmon polariton polarizer

The attenuation characteristics of a multilayer metal clad GaAs-AlGaAs optical waveguide polarizer are theoretically investigated. The dispersion relations and field distribution of the multilayer structures are calculated for different geometrical parameters and material properties. The polarizer studied consists of a single mode finite/infinite metal clad GaAs-AlGaAs waveguide with a dielectric (SiO₂/Si₃N₄) buffer layer inserted between the metal and the waveguide.Conventionally, the TM polarized waves are found to exhibit an absorption peak at a particular buffer thickness (called critical buffer thickness).We shall show that the maximum TM absorption can be improved by a multiple factor up to 7 by choosing a buffer layer thicker than its critical value. This corresponds to an extinction ratio of 1470 dB for a polarizer length of 1 mm. Further, thicker buffers reduce the insertion losses and values as low as 0.1 dB can be obtained. The strong TM absorption in these structures is interpreted as resonant coupling of the guided mode to the lossy surface plasmon polariton supported by the thin metal film. Thicker buffer also reduces the TE losses (insertion losses) and hence increases the extinction ratio (ratio of TM to TE losses).This can be achieved by optimizing the buffer and the metal thicknesses. Another equally efficient polarizer can be designed by positioning a dielectric (same as buffer) layer (superstrate layer) above the metal film and then optimizing the buffer, metal and the superstrate thicknesses. We also show that the proposed polarizer with the superstrate layer is highly stable even when exposed to the extreme atmospheric changes.     

Plasmonic Metasurfaces Enabled Ultra‐Compact Broadband Waveguide TM‐Pass Polarizer

Silicon waveguide polarizers offer a simple yet robust approach to address the polarization‐dependent issue of silicon‐based optical components, and hence have found numerous applications in silicon photonics. However, the available silicon waveguide polarizers suffer from the issue of large device footprint, high insertion loss (IL), and/or fabrication complexities. Here, a silicon waveguide transverse magnetic (TM)‐pass polarizer is constructed by coating a silicon waveguide with an ultra‐thin plasmonic metasurface structure that is capable of guiding slow surface wave (SW) mode. The transverse electric (TE) waveguide mode can be converted into SW mode with the involvement of metasurfaces, and hence is intrinsically absorbed and forbidden to pass, while the TM waveguide mode can be well guided due to little influence. A typical metasurface polarizer with an ultra‐short length of 2.4 µm enables the IL of 28.16 dB for the TE mode, and that of 0.53 dB for the TM mode at 1550 nm. Multiple‐band TM‐pass polarizers can be obtained by cascading two or more different metasurface‐coated silicon waveguides along the propagation direction, and a dual‐band TM‐pass polarizer is demonstrated with the IL being of 19.21 and 29.09 dB for the TE mode at 1310 and 1550 nm, respectively.     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

1.5μm Ti:LiNbO_3光波导TE_0模偏振器

在1.523μm波长He-Ne激光,对于Z切Ti扩散LiNbO_3光波导及其带有金属包覆/介质缓冲层的偏振器结构,理论上计算了单模波导的工艺参数和基模的吸收损耗系数.文中用TM_0模的共振吸收效应,在1.5μm波长首次研制成Ti:LiNbO_3光波导TE_0模偏振器.当器件长度为2mm和9mm时,其消光比分别为20dB和25dB.     

1.5μm质子交换铌酸锂光波导TE0模偏振器

在１．５μｍ光波长，首次研制出质子交换铌酸锂光波导ＴＥ０模偏振器。器件由嵌在Ｔｉ扩散波导之间的一段质子交换波导构成，器件长度为２ｍｍ。实验测得，偏振器的消光比和带尾纤插入损耗分别为４２ｄＢ和４．３ｄＢ。     

对称单负介质包层平面波导的模式特征

系统研究了负μ材料(MNG)作为包层的对称三层平板波导的传输特性. 研究发现,这种波导既支持快波的传播,又支持TE₀,TE₁模式的慢波传输. 其模式特性不同于左手介质波导和传统介质波导,导模存在的模折射率范围要比它们的大. MNG波导的TE₀快波模缺失,且TE_m模(m>1)的传播常数大于TM_m模的传播常数. TE_m模具有双模特征,且与波导的结构参数密切相关,导致波导中的净能流出现负值. 关键词： 单负介质 平板波导 快波与慢波 传播常数     

White light interferometry test and analysis of LiNbO3 polarizer

White light interferometer can be used to measure the amplitude extinction ratio (ER) of polarizer and coupling distribution in fiber. A LiNbO₃ polarizer coupled with a polarization maintaining fiber and a silica planar waveguide at the two ends was measured using white light interferometer. According to the principles of optical coherence domain polarimeter (OCDP) technique, the test scheme is analyzed and presented to measure the ER of LiNbO₃ polarizer with its apparatus proposed correspondingly. By analyzing the interference intensity, both the ER of LiNbO₃ polarizer and its coupling crosstalk with optical fiber and waveguide are obtained. The results illustrate that the ER of a 5 mm-long LiNbO₃ polarizer is 71 dB and the crosstalk of the coupling points are around 40 dB. The results have good agreement with analysis.     

金属包层对称平面单轴晶体波导的模式场(Ⅱ)

对于晶体光轴平行于波导界面的结构,讨论了光在金属包层对称平面单轴晶体波导(波导层是单轴晶体,两个波导界面均为金属)内的传输特性.解析地得到了这种结构下波导模式场的精确解.模式场的性质因单轴晶体的性质不同而异.对于正单轴晶体,波导的主模是横电波,任何频率的光波均可激励该模式;当频率满足一定条件时,波导内传输单模,否则,将激励起高阶模式.高阶模既非TE波,也非TM波,而是两者耦合而成的混合模.对于负单轴晶体,波导的主模是一种混合模,该模式同样可被任何频率的光波所激励;当频率满足一定条件时,波导内传输单模,否则 关键词： 平面金属波导 单轴晶体 模式场 混合模     

Guided modes in a rectangular waveguide filled with single-negative materials

Based on classical electromagnetic theory, characteristics of guided modes in a rectangular waveguide filled with a pair of single-negative layers are studied. The results show that only surface waves of TE mode can propagate in this peculiar waveguide, no TM mode in any forms can propagate in it. In addition, TE waveguide modes will be affected by permeability ratio μ₁/μ₂ and dielectric layer thickness ratio P. Finally, from the electric field distribution of TE mode, we find the amplitude and location of the electric field can be adjusted by changing the thickness ratio P.     

1.55 μm AlGaInAs/InP polarization-insensitive optical amplifier with tensile strained wells grown by MOCVD

Polarization-insensitive AlGaInAs'InP semiconductor optical amplifier is realized at wavelength of 1.55 . The active layer consists of three tensile strained wells with strain of 0.40%. The amplifier is fabricated to ridge waveguide structure. The testing result shows the amplifiers have excellent polarization insensitivity (less than 0.8dB). The 1540 nm wavelength optical gain is 20 dB at the bias current of 200 mA.     

Design and fabrication of a three-dimensional polymer optical waveguide polarization splitter

We present a design and fabrication of a three-dimensional polymer optical waveguide polarization splitter by taking into consideration of the induced birefringence effect of the polymer. We show that it is not possible to couple TM light from one waveguide to the other but evanescent coupling for TE light is possible. Hence the polarization splitter can be designed by considering TE mode coupling alone. This has an advantage of short interaction length of the device. Based on this consideration, we fabricated a polarization splitter with a TE extinction ratio of 15 dB and TM extinction ratio of 21 dB.     

Guided modes in slab waveguides with a left handed material cover or substrate

We study guided modes propagating along a dielectric slab waveguide with a left handed material (LHM) cover or substrate. The dispersion relation is derived by using normalized waveguide parameters. An analytical method is then proposed to calculate the universal dispersion curves. Different from a slab waveguide with a LHM core, we find that guidance properties are strongly dependent on dielectric permittivity ε and magnetic permeability μ of the substrate and cover layers. For oscillating guided modes, fundamental zero order mode is not always absence, sometimes it exists in a restricted range of normalized propagation constant. First order mode behaves as other higher order modes and exists up to infinite high frequency. Higher order modes have no double degeneracy in the case of LHM cover layer. For surface guided modes, the existence and the type of the mode solutions with respect to different parameters are classified systematically and discussed in detail. Unlike a slab waveguide with a LHM core where the dispersion curve of TE₁ surface mode continues with that of oscillating TE₁ mode, the dispersion curve of TE₁ surface mode continues with that of oscillating TE₀ mode. It seems that the two different kinds of modes compensate each other to form one whole mode. Both TE and TM guided modes are discussed.     

基于全矢量模式匹配法的三维弯曲波导本征模式计算

采用精确、严格的全矢量模式匹配法，计算了三维脊型弯曲波导和条形弯曲波导的本征模式，分析了模式折射率和辐射损耗随弯曲半径的变化关系.计算结果与已报道的有限差分法的结果符合很好.对文献中已报道但没有深入分析的现象给出了合理的解释.半径为50和12 μm的条形波导的计算结果表明：当波导的弯曲半径减小时，发生在分界面处的TE-TM模耦合会显著增强，这将导致弯曲波导中的模式不再是传统意义上的准TE模和准TM模，而是混合模.随着半径的减小，混合模的横向分量之间的差异会减小，当两个横向分量达到近似相等的强度时，波导的偏振相关性将会大大减小. 关键词： 导波光学 全矢量模式匹配法 微环谐振腔 光波导理论     

On the efficiency of the second harmonic generation in optical waveguides: TM case

In this paper we analyse the second harmonic generation of TM polarisation in a planar waveguide with a non-linear anisotropic substrate using the coupled mode theory under the non-depleted pump approximation. It is an extention of our previous paper in which we treated TE polarisation. Moreover, both guided waves and erenkov radiation are now taken into account simultaneously. It is shown both analytically and numerically that the erenkov efficiency peak follows the L ^3/2 dependence on the interaction length L also for TM polarisation. In an anisotropic KTP/Si₃N₄/SiO₂ waveguide, higher maximum attainable second harmonic generation (SHG) efficiency was calculated for the TM polarisation than for the optimum TE case.     

Optical surface modes of photonic crystals for dual-polarization waveguide

In this study, the design of a polarization-independent (dual-polarization) waveguide is presented by utilizing surface modes of photonic crystals. The waveguide structure operates in a frequency interval that is commonly shared by both transverse-electric (TE) and transverse-magnetic (TM) polarizations. The numerical calculations based on plane wave expansion and finite-difference time-domain methods are carried out to design and demonstrate a surface mode waveguide that provides confinement and guiding for both TE and TM modes. Once the relevant modes are properly excited, the high transmission efficiency of the photonic crystal surface waveguide is ensured. The demand to have polarization-insensitive devices makes our proposed design an important component for the photonic integrated circuit applications. Finally, we also propose a broadband surface mode photonic crystal waveguide with a bandwidth value of 28% for only TE polarization.     

Improvement of polarization extinction in silicon waveguide devices

The SOI based waveguide devices are found to be highly polarization sensitive. Unwanted polarization excitations can be attenuated by integrating a TE- or TM-pass polarizer. A large attenuation of TM-polarized light has been observed when a thin film of metal is coated on the top of silicon rib waveguide, while TE-polarized light remains almost unaffected. The attenuation of TM-polarized light is attributed to the plasmonic absorption of the evanescent field in the metal cladding. Typically, with an Al cladding of thickness ～ 100 nm and a length of 1 mm on top of a single-mode (λ ～ 1550 nm) SOI rib waveguide structure, TE vs TM extinction ratio of ～ 15 dB has been obtained. Integrating such waveguide polarizers in a directional coupler and MZI based DWDM channel interleaver, we have also achieved an improvement in polarization extinction by ～ 15 dB.     

Simultaneous two wavelength operation of an optically pumped HCOOH laser on orthogonally polarized modes

Simultaneous laser operation in orthogonally polarized EH₁₁ and TE₀₁ waveguide modes is reported for pairs of cascade lines from an optically pumped formic acid vapour laser incorporating a strip grating output coupler. Observations were made for the 394 m/406 m and 433 m/446 m cascade sequences, the resonator length being adjusted so that the laser was simultaneously resonant on a mode of the primary transition polarized perpendicular to the strips of the output coupler and the same transverse mode of the secondary transition polarized parallel to the coupler strips. Power measurements showed that for the laser configuration used in this study the power of the primary transition was increased only slightly when the cascade lines were simultaneously resonant, whereas the secondary line could only lase under these conditions.     

Loss in low-finesse Ti:LiNbO3 optical waveguide resonators

We propose to measure the contrast of Fabry-Perot resonances in low-finesse (end face polished) integrated optical resonators to determine an upper limit of the waveguide attenuation coefficient. The method is discussed; its absolute accuracy increases with decreasing loss. As example, experimental results are presented for 3 and 10 m wide Ti: LiNbO₃ strip guides; the attenuation coefficients are 0.46 dB/cm (EH₁₁) in the narrower guide at =0.63 m, respectively 0.19 dB/cm (EH₁₁) and 0.09 dB/cm (HE₁₁) in the 10 m wide guide at =1.15 m.