N-vinylcarbazole polymerization by 13X molecular sieve exchanged with Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)

The polymerization of N-vinylcarbazole by 13X molecular sieves modified by five different transition metal ions, viz. Mn(II), Co(II), Ni(II), Cu(II) and Zn(II), has been studied under various conditions. The order of reactivity follows the trend: Mn(II) ≈ Cu(II) > Co(II) > Zn(II) > Ni(II) at pH ∼ 3.55 and an exchange level of 30% of the metal ion. The polymerizations are believed to occur by a dual-ion-initiation mechanism in which both metal ions and proton centres participate. The overall energy of activation (E_a) for each system decreases with decreasing pH of the exchanging salt solution. Average activation energy on proton centre (E_H) and that on metal ion centre (E_a) have been evaluated for each system. E_a, E_H and E_c have been shown to correlate with one another. The molecular weights and their distributions are affected by the nature of the metal ion and also by the protonic centres. The possibility of a correlation of the catalytic activity of the modified 13X with ionic radius, electronegativity and normal co-ordination number has been examined.     

Solvent extraction of copper(II), nickel(II), cobalt(II), zinc(II), and iron(Ill) by high molecular weight hydroxyoximes

The effects of pH have been examined on the extraction of the title ions by complexing with LIX-64N in kerosene. The extent of metal extraction as a function of pH is: Cu(II) < Fe(III) < Ni(II) < Zn(II) < Co(II). Stripping of all metal ions but cobalt with sulphuric acid from loaded kerosene complexing solutions is easily accomplished. Oxidation of Co(II) to Co(III) in the organic phase prevents stripping of this metal ion.     

Synthesis and spectroscopic studies of novel Cu(II), Co(II), Ni(II) and Zn(II) mixed ligand complexes with saccharin and nicotinamide

Four novel mixed ligand complexes of Cu(II), Co(II), Ni(II) and Zn(II) with saccharin and nicotinamide were synthesised and characterised on the basis of elemental analysis, FT-IR spectroscopic study, UV–Vis spectrometric and magnetic susceptibility data. The structure of the Cu (II) complex is completely different from those of the Co(II), Ni(II) and Zn(II) complexes. From the frequencies of the saccharinato CO and SO₂ modes, it has been proven that the saccharinato ligands in the structure of the Cu complex are coordinated to the metal ion ([Cu(NA)₂(Sac)₂(H₂O)], where NA — nicotinamide, Sac — saccharinato ligand or ion), whilst in the Co(II), Ni(II) and Zn(II) complexes are uncoordinated and exist as ions ([M(NA)₂(H₂O)₄](Sac)₂).     

Sorption isotherms of Nickel(II), Cobalt(II), Mercury(II), and Lead(II) ions on a phosphorus-containing polymeric sorbent

The influence of the concentration of a complexing ion on the sorption recovery of nickel, cobalt, mercury, and lead ions from aqueous solutions by a phosphorus-containing polymeric polybutadiene-based sorbent was studied. Sorption isotherms of the studied metal ions were processed by the Langmuir and Freindlich models. The affinity of metal ions to the functional groups of a sorbent and the stability of complexes were established to decrease in the order Hg(II) > Pb(II) > Co(II) > Ni(II).     

Thermal studies on cobalt(II), nickel(II) and copper(II) ternary complexes of N-(2-acetamido) iminodiacetic acid and imidazoles

The thermal decomposition of Co(II), Ni(II) and Cu(II) complexes has been studied using thermogravimetry (TG) and differential TG (DTG). The complexes have been characterized by IR spectroscopy. The results reveal that the decomposition of these complexes is accompanied by the formation of metal acetate as an intermediate fragments. On the basis of the applicability of a non-isothermal kinetic equations, it was demonstrated that the stability of the complexes follows the order Co(II)>Cu(II)>Ni(II). These stably correspond to the strength of chelation between the metal ions and the primary and secondary ligands. A possible mechanism of the thermal decomposition of the complexes is suggested.     

Cobalt(II) and Nickel(II) Transfer through Charged Polysulfonated Cation Exchange Membranes

The transport of Co(II) and Ni(II) ions through charged polysulfonated ion exchange membranes under Donnan dialysis conditions has been studied as a function of pH gradient at 25 degrees C. In the Donnan dialysis process, the membrane is bounded by two electrolyte solutions, the one side (donor phase) initially containing metal salts and the other H(2)SO(4) with no external potential field applied. The transport of metal ions through membranes was correlated with the flux data as well as with estimated diffusion coefficients and was found to depend on the interaction between the fixed groups in the membrane and the metal ions. It was observed that the pH gradient influences the transport of metals and the flux of ions increases with H ion concentration in the receiver phase. Copyright 2000 Academic Press.     

镍, 锌, 钴(II)-N-(间甲苯基)亚氨基二乙酸-氮三乙酸的量热研究

使用改进的RD-1型热导式量热计测量了镍(II), 锌(II),钴(II)-N-(间甲苯基)亚氨基二乙酸-氮三乙酸三元配合物的生成焓, 发现其大小按金属离子来说符合Irving-William序列。利用配体的多环水化结构等讨论了该三元配合物的生成焓和相应的二元配合物的生成焓, 同时求得了上述三元体系的热力学参数, 指出上述三元体系的生成熵是导致这些三元体系具有较大稳定性的根本原因。     

Synthesis,structural, spectroscopic,biological and catalytic activity of Co(II), Ni(II) and Cu(II) complexes of benzilic hydrazide (BH)

Co(II), Ni(II) and Cu(II) chloro complexes of benzilic hydrazide (BH) have been synthesized. Also, reaction of the ligand (BH) with several copper(II) salts, including NO₃ ^?, AcO^?, and SO₄ ^? afforded metal complexes of the general formula [CuLX(H₂O) _n ]·nH₂O, where X is the anion and n = 0, 1 or 2. The newly synthesized complexes were characterized by elemental analysis, mass spectra, molar conductance, UV–vis, IR spectra, magnetic moment, and thermal analysis (TG/DTG). The physico-chemical studies support that the ligand acts as monobasic bidentate towards metal ion through the carbonyl and hydroxyl oxygen atoms. The spectral data revealed that the geometrical structure of the complexes is square planar for Cu (II) complexes and tetrahedral for Co(II) and Ni(II) complexes. Structural parameters of the ligand and its complexes have been calculated. The ligand and its metal complexes are screened for their antimicrobial activity. The catalytic activities of the metal chelates have been studied towards the oxidative decolorization of AB25, IC and AB92 dyes using H₂O₂. The catalytic activity is strongly dependent on the type of the metal ion and the anion of Cu(II) complexes.     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

A dinuclear Ni(II) complex with two types of intramolecular magnetic couplings: Ni(II)-Ni(II) and Ni(II)-TTF*+

A dinuclear Ni(II) complex involving tetrathiafulvalene (TTF) radicals as ligands has been prepared and characterized, [Ni2(mu-Cl)2(L*+)2(I3)4(I2)3.(H2O)2.(C4H8O)3 (1), L = 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene. There are two types of intramolecular magnetic exchange interactions, namely one ferromagnetic Ni(II)-Ni(II) and one antiferromagnetic Ni(II)-TTF*+. This study is new in the respect of revealing a magnetic exchange interaction between a TTF*+ radical and a paramagnetic transition metal ion. This is due to the fact of a direct binding of the transition metal ion to the skeleton of the TTF*+ radical.     

Separation of cobalt(II) from nickel(II) by solid-phase extraction into Aliquat 336 chloride immobilized in poly(vinyl chloride)

A solid-phase absorbent obtained by the immobilization of Aliquat 336 chloride in poly(vinyl chloride) is reported to extract preferentially Co(II) from its 7 M hydrochloric acid solutions containing Ni(II). Under the experimental conditions there was no extraction of Ni(II) which allowed the complete separation of these two ions. Co(II) was rapidly and quantitatively back-extracted with deionised water. A mechanism for the extraction of Co(II) is proposed based on the formation of the ion-pair A⁺[HCoCl₄]⁻ where A⁺ is the Aliquat 336 cation. Fe(III) and Cd(II), usually present in Co(II) and Ni(II) samples, were also extracted into the solid-phase absorbent though at a slower rate than Co(II) and they did not interfere with the separation of Co(II) from Ni(II). It was also demonstrated that this approach allowed the complete separation of Ni(II) from the other metal ions mentioned above.     

Thermal behavior of Co(II) and Ni(II) hydroxycarboxylate complexes obtained by two original synthesis methods

This paper presents a facile and rapid synthesis route of metallic Ni and Co nanocrystallites at ~150 °C in the mixture composed of the corresponding metal nitrates and 1,3-propanediol, as reducing agent. The metal oxides NiO, CoO, Co₃O₄ nanocrystallites were, also, successfully synthesized by thermal decomposition at 300 °C of the hydroxycarboxylate coordination products, obtained in the redox reaction between 1,3-propanediol and Ni(II) and Co(II) nitrates. The formation of the Ni(II) and Co(II) hydroxycarboxylate complexes depends on the diol which generates the carboxylate anion, the transition metal and the process parameters. Ni(II) and Co(II) nanocomposites were also synthesized by thermal decomposition of the complex combinations formed within the pores of the hybrid silica gels. One of the purposes of the present study was to investigate the phase constitution of the composites obtained in similar synthesis conditions, from Ni(II) and Co(II) complex combinations embedded in silica gels. These gels were submitted to various thermal treatments and the changes occurring during these treatments were described by X-ray diffraction. Thermal analysis is an excellent tool for the study of the processes implied in the formation and decomposition of the Co(II) and Ni(II) carboxylate complexes. X-ray diffraction evidenced the nanometer sized metal and/or metal oxide phases.     

Reactivity of potassium tetracyanomercurate with Ag(I), Ni(II) And Co(II)

Potentiometric and conductometric studies on the reactions between K(2)Hg(CN)(4) and Ag(I), Ni(II), Co(II) are reported. The possibility of determination of these metal ions has been evaluated and some titration data are reported.     

A new method for simultaneous determination of Co(II), Ni(II) and Pd(II) as morpholine-4-carbodithioate complex by SPME-HPLC-UV system

A new approach for the analysis of Co(II), Ni(II) and Pd(II) as morpholine-4-carbodithioate (MDTC) complexes in aqueous medium by using solid phase microextraction (SPME)-high performance liquid chromatography (HPLC)-UV has been developed. The method involves sorption of metal complexes on PDMS fiber from aqueous solution followed by desorption in the desorption chamber of SPME-HPLC interface using acetonitrile:water (60:40) as mobile phase. A good separation of metal complexes is achieved on C₁₈ column. The detection limits of Co(II), Ni(II) and Pd(II) are 0.17, 0.11 and 0.06 ng ml⁻¹, respectively. These can be determined by the proposed method without interference from other common metal ions such as Mo(VI), V(V), Ag(I), Sn(IV), Cd(II), Pb(II), Zn(II), Ag(I), Sn(II), Cr(III) and Cr(VI). The method was applied to the determination of these metals in different alloy samples and drinking water sample.     

Study of binary complexes of Cu(II), Ni(II) and Co(II) with sulfamethazine by voltammetry

Cyclic voltammetry (CV) and square-wave voltammetry (SWV) techniques have been used to study the binary complexes of Co(II), Ni(II) and Cu(II) with sulfamethazine (SMZ) at a static mercury drop electrode (SMDE) in 0.04 M Britton-Robinson (B-R) buffer. SMZ gave three peaks at 0.01, −1.32 and −1.55 V. Cu(II)-SMZ complex was recognized by a cathodic peak at −0.38 V. Ni(II)-SMZ complex was reduced at more positive potential (−0.77 V) than that of the hydrated Ni(II) ions (−1.08 V). Co(II)-SMZ complex is investigated at pH 7 and 8. The Co(II) complex at pH 7 is appeared as a shoulder at −1.19 V, whereas this peak becomes a well-separated form at pH 8. The study indicated that the SMZ serves as a catalyst in the reduction of Co(II) and Ni(II) ions. From electronic spectra data of the complexes, their stoichiometries of 1: 2 (metal-ligand) in aqueous medium are determined. The stability constants of the complexes are in agreement with the Irwing-Williams series (Co < Ni < Cu).     

Synthesis, crystal structure, and magnetic properties of oxime-bridged polynuclear Ni(II) and Cu(II) complexes

Two new polynuclear complexes [Ni6(amox)6(mu6-O)(mu3-OH)2](Cl2).6H2O and [Cu3(amox)3(mu3-OH)(mu3-Cl)](ClO4).4H2O (amox- = anion of 4-amino-4-methyl-2-pentanone oxime) have been synthesized and characterized structurally and magnetically. The Ni(II) complex contains a novel Chinese-lantern-like Ni6 cage centered by an oxo ion. It contains the nearest octahedral Ni(II)...Ni(II) separation (<2.8 A) and exhibits strong antiferromagnetic properties. The Cu(II) complex has a cyclic trinuclear copper(II) core bridged by both mu3-OH(-) and mu3-Cl(-) ions. The magnetic susceptibilities of both antiferromagnetic complexes were fitted by using approximate models.     

Transition metal polymeric chelates: Spectral, magnetic, thermal behaviour of polymeric chelates of poly(resacetophenone diyl ethylene)s with Ni(II), Cu(II), Mn(II), Zn(II) and Co(II)

Polymeric chelates of the type [ML₂]_n where M = Ni(II), Cu(II), Zn(II) or Co(II), L = poly(resacetophenone diyl ethylene)s, andn= degree of polymerization, have been synthesized. Their structures have been elucidated on the basis of analytical, magnetic, electronic and IR spectral studies. Electronic spectra in conjunction with magnetic moments are in accord with an octahedral environment around the central metal ion in all polymeric chelates except Cu(II) and Zn(II) polymeric chelates which have been shown to possess square planar and tetrahedral geometries, respectively. IR spectral studies further suggest that the metal ions are coordinated through the oxygens of the carbonyl and the phenolic hydroxyl groups. All the chelates are paramagnetic except Zn(II), which is found to be diamagnetic.     

Mononuclear and homobinuclear cobalt(II), nickel(II) and copper(II) complexes with mono and bis-azocompounds derived from 2,7-dihydroxynaphthalene and anthranilic acid or o-aminophenol

Two new series of mononuclear and homobinuclear Co(II), Ni(II) and Cu(II) complexes with mono- and bis-azo compounds derived from 2,7-dihydroxynaphthalene and anthranilic acid or o-aminophenol are prepared and characterized by elemental and thermal analyses, conductance, IR, electronic, ESR spectra and magnetic moment measurements. The ligand field splitting parameters and Racah constant are calculated. The spectral and magnetic results obtained are utilized to determine the geometries around the metal(II) ion. The geometry of the complex formed depends on the structure of the ligand and the type of metal(II) ion. The mode of bonding of the ligand with the metal ions is deduced from IR spectra.     

Mono{hydrotris(mercaptoimidazolyl)borato} complexes of manganese(II), iron(II), cobalt(II), and nickel(II) halides

A series of [Tm(Me)M(mu-Cl)]2 and Tm(R)MCl (Tm(R) = tris(mercaptoimidazolyl)borate; R = Me, tBu, Ph, 2,6-iPr2C6H3 (Ar); M = Mn, Fe, Co, Ni) complexes have been prepared by treatment of NaTm(Me) or LiTm(R) with an excess amount of metal(II) chlorides, MCl2. Treatment of Tm(R)MCl (R = tBu, Ph, Ar) with NaI led to a halide exchange to afford Tm(R)MI. The molecular structures of [Tm(Me)M(mu-Cl)]2 (M = Mn, Ni), [Tm(Me)Ni(mu-Br)]2, Tm(tBu)MCl (M = Fe, Co), Tm(Ph)MCl (M = Mn, Fe, Co, Ni), Tm(Ar)MCl (M = Mn, Fe, Co, Ni), Tm(Ph)MI (M = Mn, Co), and Tm(Ar)MI (M = Fe, Co, Ni) have been determined by X-ray crystallography. The Tm(R) ligands occupy the tripodal coordination site of the metal ions, giving a square pyramidal or trigonal bipyramidal coordination geometry for Tm(Me)M(mu-Cl)]2 and a tetrahedral geometry for the Tm(R)MCl complexes, where the S-M-S bite angles are larger than the reported N-M-N angles of the corresponding hydrotris(pyrazolyl)borate (Tp(R)) complexes. Treatment of Tm(Ph)2Fe with excess FeCl2 affords Tm(Ph)FeCl, indicating that Tm(R)2M as well as Tm(R)MCl is formed at the initial stage of the reaction between MCl2 and the Tm(R) anion.     

Thiacalix[4]arenetetrasulfonate as specific pre-column chelating reagent for nickel(II) ion in kinetic differentiation mode high-performance liquid chromatography

Thiacalix[4]arenetetrasulfonate (TCAS) has been examined as a pre-column chelating reagent for the determination of trace metal ions by kinetic differentiation mode (KD) ion-pair reversed-phase high-performance liquid chromatography (HPLC) with spectrophotometric detection. Among 14 kinds of common metal ions tested here, viz. Al(III), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V), and Zn(II) ion, only Ni(II) ion was detected as the TCAS chelate in the HPLC separation stage in spite of TCAS forming the chelates with various metal ions except for Al(III), Ca(II), and Mg(II) at the pre-column chelation stage. The undetected metal-TCAS chelates seemed to be dissociated on an HPLC column where no added TCAS was present in the mobile phase because of their kinetic unstability. The calibration graph for Ni(II) ion gave a wide linear dynamic range (40-20,000 nM) with the very low detection limit (DL) (3σ base-line fluctuation) to be 5.4 nM (0.32 ng ml⁻¹). The practical applicability of the KD-HPLC method with TCAS was demonstrated with the determination of trace Ni in coal fly ash.