Synthesis, reactivity, and properties of N-fused porphyrin manganese(I) tricarbonyl complexes

The reactions of N-fused tetraphenylporphyrin (NFTPP, 1a) and its 21-substituted derivatives, 21-Br-NFTPP (1b), 21-NO(2)-NFTPP (1c), and 21-Bz-NFTPP (1d), with Mn(CO)(5)Br gave the manganese(I) tricarbonyl complexes bearing N-fused tetraphenylporphyrinato ligands (2a-d), respectively, in 46-99% yields. The complexes were characterized by mass, IR, (1)H and (13)C NMR spectroscopy, and the final structural proof was evident from the X-ray crystallographic analysis for 2a. The crystals of 2a·CH(2)Cl(2) belong to the monoclinic space group P2(1)/n (#14), with a = 15.007(2) ?, b = 12.5455(19) ?, c = 21.150(3) ?, β = 102.227(4)°, and Z = 4. The lengths (?) of three manganese-nitrogen and three manganese-carbon bonds are inequivalent respectively [Mn-N(2), 2.007(2); Mn-N(23), 2.033(2); Mn-N(24), 1.988(3); and Mn-CO, 1.798(4), 1.804(4), 1.841(3)], reflecting the asymmetric structure of the NFp ligand. The aromatic substitution reactions of 2a, such as nitration, formylation, and chlorination, proceeded without a loss of center metal to give the corresponding 21-nitro (2c), 21-formyl (2e), and 21-chloro (2f) derivatives, regioselectively. In the electrochemical measurements of 2, one reversible oxidation and two reversible reduction waves were observed. The redox potentials of 2 indicate the narrow energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO) being consistent with the electronic absorption spectra that display the absorption edges over 1000 nm. Protonation occurred at the inner core nitrogen of 2a upon the addition of acids, which is inferred from the (1)H NMR spectra as well as theoretical calculations. By a treatment with amine N-oxides, demetalation of 2 proceeded to afford the corresponding NFP free-bases (1).     

Synthesis and properties of rhenium tricarbonyl complex bearing N-fused tetraphenylporphyrin ligand

An N-fused porphyrin rhenium complex was synthesized by the thermal reaction of an N-confused porphyrin with Re2(CO)10 and its structure was determined by X-ray crystallographic analysis.     

Catalytic deoxygenation of pyridine N-oxides with N-fused porphyrin rhenium complexes

Deoxygenation reactions of pyridine N-oxide derivatives catalyzed by N-fused porphyrin rhenium(VII) trioxo complexes are developed, affording the corresponding pyridine derivatives in quantitative yields with excellent turnover numbers up to 340,000.     

Synthesis and structural studies of rhenium(I) tricarbonyl complexes with thione containing chelators

Sodium dihydrobis(2-mercaptothiazolyl)borate, Na[H₂B(tiaz)₂], reacts with (NEt₄)₂[Re(CO)₃Br₃] in water to afford fac-[Re{κ³-H(μ-H)B(tiaz)₂}(CO)₃] (1). In a similar manner, treatment of the same Re(I) starting material with bis(2-mercaptoimidazolyl)methane, H₂C(tim^Me)₂, yields fac-[ReBr{κ²-H₂C(tim^Me)₂}(CO)₃] (2). The organometallic complexes 1 and 2 have been characterized by IR, ¹H and ¹³C NMR spectroscopy, and also by X-ray crystallographic analysis. X-ray diffraction analysis revealed the presence of a short B-H?Re interaction in the case of 1, and the absence of C-H?Re interactions in the crystal structure of 2. For both compounds the rhenium atom adopts a slightly distorted octahedral coordination with a facial arrangement of the carbonyl ligands. The three remaining coordination positions are occupied by the two thione sulfur atoms from the anchor ligands, and by an agostic hydride (1) or a bromide ligand (2). Compound 1 is highly stable either in the solid state or in solution. In particular, its B-H?Re interaction is retained in solution, even in coordinating solvents, namely acetonitrile, dimethylsulfoxide and tetrahydrofuran. Unlike 1, compound 2 is only moderately stable in acetonitrile, undergoing a slow release of the bis(2-mercaptoimidazolyl)methane.     

Synthesis, characterization and photochromic studies of spirooxazine-containing 2,2'-bipyridine ligands and their rhenium(I) tricarbonyl complexes

A series of spirooxazine-containing 2,2'-bipyridine ligands and their rhenium(i) tricarbonyl complexes has been designed and synthesized, and their photophysical, photochromic and electrochemical properties have been studied. The X-ray crystal structures of two of the complexes have been determined. Detailed studies showed that the emission properties of the complexes could readily be switched through photochromic reactions.     

Synthesis, characterization, photophysical, and computational studies of rhenium(I) tricarbonyl complexes containing the derivatives of bipyrazine

The chloro and pyridinate derivatives of rhenium(I) tricarbonyl complexes containing the diimine ligands 2,2'-bipyrazine (bpz) and 5,5'-dimethyl-2,2'-bipyrazine (Me2bpz) are reported. Absorption maxima occur in the visible and ultraviolet regions of the spectrum; emission is structureless at room temperature and at 77 K; the infrared spectrum consists of three carbonyl stretches; electrochemically, a reversible reduction, an irreversible reduction, and an irreversible oxidation take place. Some ring protons are shielded and others deshielded in the presence of the methyl substituents attached to the bpz ring. DFT and TDDFT calculations provide insight into interpreting electronic and vibrational properties of the complexes. When compared to similar rhenium(I) tricarbonyl complexes of 2,2'-bipyridine (bpy) and 2,2'-bipyrimidine (bpm), the Me2bpz complexes are comparable to bpm derivatives and their properties are intermediate between those of bpy and bpz complexes.     

Proton-induced luminescence of mono- and dinuclear rhenium(I) tricarbonyl complexes containing 4-pyridinealdazine

New mono- and dinuclear rhenium(I) tricarbonyls, of formulas [Re(bpy)(CO)3(PCA)]+ (1), [(bpy)(CO)3Re(I)(PCA)Re(I)(CO)3(bpy)]2+ (2), and [(bpy)(CO)3Re(I)(PCA)Ru(II)(NH3)5]3+ (3) (bpy = 2,2'-bipyridine, PCA = 4-pyridinecarboxaldehydeazine), have been synthesized as PF6- salts and characterized by spectroscopic, electrochemical, and photophysical techniques. These species do not emit at room temperature in CH(3)CN; however, in aqueous solutions, a decrease in pH induces luminescence in all of them, due to protonation of one of the N atoms of the -C=N-N=C- chain of PCA, as indicated by the pKa values of the ground states, obtained by absorption measurements, which are ca. 3 orders of magnitude lower than the pKa value of the pyridine N of PCA in complex 1. On the other hand, the values of pKa* of the excited states, obtained by emission measurements, of complexes 1 and 2 are similar (pKa* = 2.7 +/- 0.1 at I = 0.1 M) and higher than those of the corresponding ground states. At low values of pH, chemical decomposition takes place rapidly in complex 3, but not in 1 and 2, supporting the possible use of these latter species as luminescent sensors of pH. The heterodinuclear complex, of formula [(bpy)(CO)3Re(I)(PCA)Ru(III)(NH3)5]4+, was obtained by bromine oxidation of the [Re(I), Ru(II)] precursor in CH3CN solution; from spectral and electrochemical measurements, the recombination charge-transfer reaction [Re(II), Ru(II) ] --> [Re(I), Ru(III)], which occurs after photoexcitation, is predicted to lie in the Marcus inverted region.     

Photoswitching tetranuclear rhenium(I) tricarbonyl diimine complexes with a stilbene-like bridging ligand

Highly efficient photoswitching tetranuclear rhenium(I) tricarbonyl diimine complexes with a stilbene-like bridging ligand are reported. The ability to directly populate excited states localized on the bridging ligand is the key for the observed efficient photoisomerization.     

Synthesis, structural characterization, and electrophosphorescent properties of rhenium(I) complexes containing carrier-transporting groups

Two novel diimine rhenium(I) carbonyl complexes with the formula [Re(CO)(3)(L)Br], where L = 1-(4-5'-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (1) and 1-(4-carbazolylbutyl)-2-pyridinylbenzoimidazole (2), have been successfully synthesized and characterized by elemental analysis, (1)H NMR, and IR spectra. Their electrochemical, photophysical, and electroluminescent behaviors, along with the X-ray crystal structure analysis of 2, are also described. White electrophosphorescent devices were fabricated using 1 and 2 as emitters. The devices based on carbazole-containing (hole-transporting group) 2 with the structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/2:CBP (8%, 30 nm)/Bphen (20 nm)/Alq(3) (20 nm)/LiF (0.8 nm)/Al (200 nm) exhibit Commission Internationale de L'Eclairage coordinates of x = 0.34, y = 0.33 with a maximum brightness of 2300 cd/m(2) at 580 mA/cm(2). When a brightness of 1500 cd/m(2) appears at 230 mA/cm(2), the devices based on 10 wt % 2 still possess 56% of the maximum efficiency which appeared at 2.7 mA/cm(2). These performances are among the best reported for devices using Re(I) complexes as emitters. By comparison of the electroluminescent properties of the devices based on 1 and 2, we conclude that the introduction of the carbazole group into the ligand improves the performance of 1-doped devices.     

Synthesis,reactivity and x-ray crystal structures of mixed thiazolato- or carboxylato- carbonyl(phosphine) rhenium(I) complexes

Summary The compound [Re(CO)₃(PPh₃)₂Cl] reacts with the lithium salt of thiazole derivatives (L¹H = 2-amino-benzothiazole, L²H = 2–N-methyl-aminothiazole, L³H = 2–N-phenylaminothiazole, L⁴H = 2–N-(4-methoxyphenyl)aminothiazole, L⁵H = 2–N(4-nitrophenyl)aminothiazole) to give [Re(CO)₂-(PPh₃)₂(L)]. The compounds have been characterized by elemental analysis, i.r. and¹H n.m.r. spectra. At room temperature [Re(CO)₂(PPh₃)(L²)] reacts with L⁶H (L⁶H = diphenylacetic acid), to give the carboxylato complex [Re(CO)₂ .The crystal structures of [Re(CO)₂(PPh₃)₂(L²)] (2) and [Re(CO)₂(PPh₃)₂(L⁶)] (6) were determined by x-ray crystallography. [Re(CO)₂(PPh₃)₂(L²)] crystallizes in the monoclinic space group P2₁/m witha = 9.16(1),b= 24.82(2),c =9.12(1) Å, and = 115.81(4)°; D_c = 1.56 g cm^–3for Z = 2.The structure was refined to a final R of 6.4%. The molecules have C_s symmetry. The rhenium atom is six-coordinate with approximately octahedral geometry. The anionic ligand is chelating through the nitrogen atoms and is strictly planar allowing delocalization of the -electron density. [Re(CO)₂(PPh₃)₂(L⁶)] (6) crystallizes in the monoclinic space group P2₁/n witha = 22.203(5),b = 18.651(5),c =10.653(3) Å, = 91.08(3)°, Dc = 1.47 g cm^–3 for Z = 4. The structure was refined to a final R of 4.7%. The complex is monomeric and the rhenium atom is distorted octahedral with two mutuallytrans PPh₃ ligands, twocis CO ligands and one chelating Ph₂CHCO ₂ ^– ion.     

Synthesis, structure, photophysical and electrochemiluminescence properties of Re(I) tricarbonyl complexes incorporating pyrazolyl-pyridyl-based ligands

Three rhenium carbonyl complexes 1-3 were synthesized by reaction of the appropriate bidentate pyrazolyl-pyridyl-based ligand L1, L2 (L1 = 2-[1-{4-(bromomethyl)benzyl}-1H-pyrazol-3-yl]pyridine; L2 = 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene) with [Re(CO)(5)Cl] in toluene. They were characterized by elemental analyses, ESI-MS, (1)H spectroscopy, and X-ray crystallography for 1 and 2. Compounds 1-3 exhibit bright yellow-green luminescence in the solid state and in solution at 298 K with the lifetimes in the microsecond range. It is noteworthy that the luminescent quantum efficiencies of compounds 1-3 are between 0.040 and 0.051, which are much higher than that of the [Re(bpy)(CO)(3)Cl] complex (= 0.019) (M. M. Richter et al., Anal. Chem., 1996, 68, 4370; J. Van Houten et al., J. Am. Chem. Soc., 1976, 98, 4853). Electrogenerated chemiluminescence (ECL) was observed in solutions of these complexes in the absence or presence of coreactant tri-n-propylamine (TPrA) or 2-(dibutylamino)ethanol (DBAE) by stepping the potential of a Pt disk working electrode. The ECL spectra are identical to the photoluminescence spectra, indicating that the chemical reactions following electrochemical oxidation or reduction form the same (3)MLCT excited states as that generated in the photoluminescence experiments. In most cases, the ECL quantum efficiencies of complexes 1-3 are comparable to that of the [Re(L)(CO)(3)Cl] (L = bpy or phen) system. Oxygen tends to substantially decrease ECL intensities of the three rhenium complexes-TPrA system, which could allow them to be used as oxygen sensors.     

Synthesis and characterization of manganese and rhenium tricarbonyl complexes with (O,O,O)-donor ligands

Complexes of the type [(C₅H₅)Co{P(O)R₂}₃]^?, R = OCH₃, OC₂H₅, react as tridentate oxygen ligands L^? with [MBr(CO)₅], M = Mn, Re, in hexane or tetrahydrofuran to give the tricarbonyl derivatives [LM(CO)₃]. The slightly volatile yellow crystalline compounds have been characterized by elemental analysis, ¹H NMR, IR and mass spectra. The low CO stretching frequencies indicate that the ligands L^? are good π-donor ligands.     

Synthesis of N-heterocyclic carbene rhenium(I) carbonyl complexes

Reaction of aminophosphinimine [RHN(CH(2))(2)N[double bond, length as m-dash]PPh(3)] (R = H, Et) with Re(2)(CO)(10) provided the NH-functionalized carbene rhenium complex [Re(2)(CNHCH(2)CH(2)NR)(CO)(9)] (3a, R = H, 3b, R = Et). Treatment of 3 with Br(2) provided the mono nuclear [Re(CNHCH(2)CH(2)NR)(CO)(4)Br] (1, R = H, 2, R = Et). However, NH-functionalized carbene complexes 1-3 did not undergo N-alkylation with alkyl halides to yield the N-substituted NHC complexes. The direct ligand substitution of [Re(CO)(5)Br] with a carbene donor was employed to prepare [Re(IMes(2))(CO)(4)Br] (6a, IMes(2) = 1,3-di-mesitylimidazol-2-ylidene; 6b, IMes(2) = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene). Analyses of spectroscopic and crystal data of 6a and 6b show similar corresponding data among these complexes, suggesting the saturated and unsaturated NHCs have similar bonding with Re(I) metal centers. Reduction of 6a and 6b with LiEt(3)BH yielded the corresponding hydrido complexes 7a-b [ReH(CO)(4)(IMes(2))], but not 1 and 2. Ligand substitution of 1, 6a and 6b toward 2,2'-bipyridine (bipy) was investigated. Crystal structures of 1, 3a-b, 6a-b and 7b were determined for characterization and comparison.     

Synthesis,characterization, electrochemical and photophysical properties of bimetallic complexes of rhenium(I) and osmium(II)

Monometallic and bimetallic diimine complexes of rhenium(I) and osmium(II), [(CO)₃(bpy)Re(4,4′-bpy)](PF₆) I, [(CO)₃(bpy)Re(4,4′-bpy)Re(bpy)(CO)₃](PF₆)₂II, [Cl(bpy)₂Os(4,4′-bpy)](PF₆) III and [Cl(bpy)₂Os(4,4′-bpy)Os(bpy)₂Cl](PF₆)₂IV, and a new heterobimetallic complex of rhenium(I) and osmium(II) [(CO)₃(bpy)Re(4,4′-bpy)Os(bpy)Cl](PF₆)₂V (bpy = 2,2′-bipyridine; 4,4′-bpy = 4,4′-bipyridine) have been synthesized and characterized by various spectral techniques. The photophysical properties of all the complexes have been studied and a comparison is made between the heterobimetallic and corresponding monometallic and homobimetallic complexes. Emission and transient absorption spectral studies reveal that excited state energy transfer from the rhenium(I) chromophore (∗Re) to osmium(II) takes place. The energy transfer rate constant is found to be 8.7 × 10⁷ s⁻¹.     

Synthesis,characterization and reactivity of some rhenium phosphite complexes

The preparation and characterization of some Re(III), Re(IV) and Re(V) chloro phosphite complexes are reported. Both Re(III) and Re(IV) complexes react with sodium borohydride, yielding the corresponding polyhydrides, ReH₅[P(OEt)₃]₃ and ReH₇[P(OEt)₃]₂. The thermal and photochemical reactivity of these complexes is described.     

Synthesis and reactivity of E,Z butadiene-iron tricarbonyl complexes.

The synthesis, structure and thermal stability of the E,Z butadiene-iron tricarbonyl complex 1 is reported. This complex reacts with organometallic nucleophiles in a stereoselective synthesis of functionalized E,Z dienes.     

Catalytic and asymmetric cyclopropanation of alkenes catalysed by rhenium(I) bipyridine and terpyridine tricarbonyl complexes

Re(I) tricarbonyl bipyridine and terpyridine complexes catalyse stereospecific cyclopropanation of alkenes; high selectivity of cyclopropane vs coupling and an ee of 73% and 62% for cis- and trans-cyclopropanes of styrene respectively were achieved with the [Re(L)(CO)(3)(MeCN)]OTf complex (L = chiral C(2)-symmetric terpyridine ligand).     

Comparative studies of substitution reactions of rhenium(I) dicarbonyl-nitrosyl and tricarbonyl complexes in aqueous media

The ligand substitution behavior of [ReBr3(CO)3](NEt4)2 (1) and [ReBr3(CO)2(NO)]NEt4 (2) in aqueous media was compared. Ligand exchange reactions were performed with multidentate chelating systems such as picolylaminediacetic acid (L1; N,N',O,O'), nitrilotriacetic acid (L2; N,O,O',O'), iminodiacetic acid (L3; N,O,O'), and bis(2-pyridyl)methane (L4; N,N'). The products of the substitution reactions were isolated and characterized by means of IR, NMR, MS, and X-ray structure analysis. NMR and crystallographic analyses confirmed the formation of single structural isomers in all cases with a ligand-to-metal ratio of 1:1. With ligands L1 and L2 and precursor 1 the tridentately coordinated complexes [Re(L1)(CO)3] (7) and [Re(L2)(CO)3]2- (8) were formed. With precursor 2 the same ligands unexpectedly coordinated tetradentately after displacing a CO ligand, yielding complexes [Re(L1)(CO)(NO)] (3) and [Re(L2)(CO)(NO)]- (4). In both complexes NO was found to be coordinated trans to the carboxylate group. Time-dependent IR spectra of the reaction of 2 with ligand L1 and L2 confirmed the loss of one CO during the reaction. The product of the reaction of 2 with L3 was identified as the neutral complex [Re(L3)(CO)2(NO)] (5), again, with the nitrosyl coordinated trans to the carboxylate. With 1, ligand L3 formed the anionic complex [Re(L3)(CO)3]- (9). Finally the reactions with L4 yielded the complexes [ReBr(L4)(CO)2(NO)]Br (6) and [ReBr(L4)(CO)3] (10), in which bromide was found to be coordinated trans to the NO and CO, respectively. The X-ray structures of 3, 5-7, and 10 are discussed: 3, monoclinic P2(1)/n, with a = 14.6071(6) A, b = 8.0573(3) A, c = 24.7210(11) A, beta = 107.117(5) degrees, and Z = 4; 5, triclinic P1, with a = 6.9091(5) A, b = 9.8828(7) A, c = 14.2834(10) A, alpha = 89.246(9) degrees, beta = 89.420(9) degrees, gamma = 86.196(9) degrees, and Z = 4; 6, triclinic P1, with a = 9.8236(8) A, b = 10.0949(8) A, c = 12.5346(10) A, alpha = 108.679(9) degrees, beta = 111.992(9) degrees, gamma = 95.426(10) degrees, and Z = 2; 10, monoclinic P2(1)/c, with a = 12.7491(12) A, b = 13.3015(13) A, c = 9.0112(9) A, beta = 107.195(2) degrees, and Z = 7.     

苯并咪唑金属铼(I)配合物的合成及发光性质的研究

以过渡金属铼为中心金属离子,合成了2-(2-吡啶)苯并咪唑(HL1)和2,6-二(苯并咪唑)吡啶(HL2)配合物.该配合物荧光量子产率高、化学性质稳定,在固体状态下,最大发射峰分别是543 nm、577 nm,处在绿光和黄光区.其发光基理是基态金属离子电荷向激发态配体跃迁(MLCT),属于金属离子与配体间的dπ→π~*(L)的跃迁发光.     

Synthesis,structure, and luminescence of rhenium(I) complexes with substituted bipyridines

Two new rhenium(I) complexes chelated by a substituted 2,2′-bipyridine with general formula Re(CO)₃LCl, where L?=?6?-(2″-methoxyphenyl)-2,2′-bipyridine (L₁ ) and 6?-(4″-diphenylaminophenyl)-2,2′-bipyridine (L₂ ), are synthesized and characterized by IR, NMR, and elemental analysis. Structure of 1 was determined by single-crystal X-ray crystallography, revealing that rhenium is six-coordinate octahedral. The electrochemical, photophysical, and thermal properties of the two rhenium(I) complexes were investigated. Electroluminescent devices were fabricated by doping 1 in polymer blend host of poly(vinylcarbazole) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole using simple solution spin-coating technique. The device exhibits a maximum current efficiency of 2.97?cd?A^?1 and peak brightness in excess of 2390?cd?m^?2.