COMPARISON OF THE SOLID-MATRIX LUMINESCENCE PROPERTIES and PHOTOPHYSICAL PARAMETERS OF TWO PRODUCTS FROM BENZO(a)PYRENE-DNA ADDUCTS

Abstract The solid-matrix luminescence properties and several calculated photophysical parameters of two important products from the benzo(a)pyrene-DNA adducts were compared. The products were benzo(a)pyrene-r-7,t-8,9,c-10-tetrahydrotetrol (I-1) and 7R,8S,9S-trihydroxy-10R-(A^p-deoxyguanosyl-3'-phosphate)-7,8,9,1O-tetrahydroben-zo(a)pyrene (BPDE-dG). The solid-matrix luminescence data were obtained for 1–1and BPDE-dG adsorbed on two different solid matrices, namely, 1% a-cyclodextrin (CD)/NaCl and 25% trehalose/NaCl and at two different temperatures (93 K and 296 K). The 25% trehalose/NaCl gave higher fluorescence and phosphorescence quantum yields from both 1–1and BPDE-dG in contrast to the 1%α-CD/NaCl matrix. The BPDE-dG showed lower fluorescence quantum yields on the solid matrices compared to 1–1. The lower fluorescence quantum yields for BPDE-dG were attributed to a photoinduced electron transfer mechanism. In contrast to the room-temperature solution fluorescence of BPDE-dG, BPDE-dG gave rather high fluorescence quantum yields at room temperature when adsorbed on the two solid matrices. From solid-matrix luminescence quantum yields and solid-matrix luminescence lifetimes, many photophysical parameters were calculated and compared. Several differences among the rate constants were noted with the two solid matrices for BPDE-dG and 1–1. For example, BPDE-dG showed internal conversion at 296 K with 25% trehalose/NaCl, but no internal conversion was observed at 93 K with this solid matrix. Also, for BPDE-dG the phosphorescence rate constants at 296 K and 93 K. were very small with 25% trehalose/NaCl, but the intersystem crossing rate constants from the triplet state to the ground state were very large. The results from this work show how solid-matrix luminescence can be employed to obtain unique luminescence information from the 1–1and BPDE-dG systems.     

COMPARISON OF THE SOLID-MATRIX LUMINESCENCE PROPERTIES AND PHOTOPHYSICAL PARAMETERS OF TWO PRODUCTS FROM BENZO(a)PYRENE-DNA ADDUCTS

Abstract: The solid-matrix luminescence properties and several calculated photophysical parameters of two important products from the benzo(a)pyrene-DNA adducts were compared. The products were benzo(a)pyrene-r-7,t-8,9,c-10-tetrahydrotetrol (I-1) and 7R,8S,9S-trihydroxy-10-( N ²-deoxyguanosyl-3'-phosphate)-7,8,9,10-tetrahydroben-zo(a)pyrene (BPDE-dG). The solid-matrix luminescence data were obtained for I-1 and BPDE-dG adsorbed on two different solid matrices, namely, 1%α-cyclodextrin (CD)/NaCl and 25% trehalose/NaCl and at two different temperatures (93 K and 296 K). The 25% trehalose/NaCl gave higher fluorescence and phosphorescence quantum yields from both I-1 and BPDE-dG in contrast to the 1%α-CD/NaCl matrix. The BPDE-dG showed lower fluorescence quantum yields on the solid matrices compared to I-1. The lower fluorescence quantum yields for BPDE-dG were attributed to a photoinduced electron transfer mechanism. In contrast to the room-temperature solution fluorescence of BPDE-dG, BPDE-dG gave rather high fluorescence quantum yields at room temperature when adsorbed on the two solid matrices. From solid-matrix luminescence quantum yields and solid-matrix luminescence lifetimes, many photophysical parameters were calculated and compared. Several differences among the rate constants were noted with the two solid matrices for BPDE-dG and I-1. For example, BPDE-dG showed internal conversion at 296 K with 25% trehalose/NaCl, but no internal conversion was observed at 93 K with this solid matrix. Also, for BPDE-dG the phosphorescence rate constants at 296 K and 93 K were very small with 25% trehalose/NaCl, but the intersystem crossing rate constants from the triplet state to the ground state were very large. The results from this work show how solid-matrix luminescence can be employed to obtain unique luminescence information from the I-1 and BPDE-dG systems.     

Analytical and mechanistic aspects of the room-temperature fluorescence and phosphorescence of benzo(f)quinoline adsorbed on silica gel chromatoplates with humidified gases

The solid-matrix room-temperature fluorescence and room-temperature phosphorescence properties of benzo(f)quinoline adsorbed on silica gel chromatoplates were investigated over a wide range of humidities in N(2), air and O(2). Both neutral and acidic conditions were used and even at the highest relative humidity used, 93% relative humidity, the room-temperature fluorescence and phosphorescence intensities from benzo(f)quinoline were not totally quenched. However, in all experiments, the room-temperature phosphorescence was much more sensitive to humidity quenching than the room-temperature fluorescence. The results gave rather detailed information on quenching of the room-temperature fluorescence and phosphorescence in the different gases at a variety of humidities. It was possible to calculate the contribution to the percent decrease in luminescence due to moisture or a quenching gas. Thus, a more detailed assessment could be made about the quenching of moisture and individual quenching gases on the solid-matrix fluorescence and phosphorescence.     

Simultaneous Determination of Phenanthrene and Benzo(a)pyrene in Water Samples by Synchronous Fluorescence Spectroscopy

Abstract

A simple and sensitive method was developed to simultaneously determine phenanthrene and benzo(a)pyrene in water samples using synchronous fluorescence spectroscopy with a 56-nm Δλ. The method was used to simultaneously determine both compounds in samples of spiked surface water. Analytical recoveries were 96.9–101.1% for phenanthrene and 95.8–103.5% for benzo(a)pyrene. Analytical results were checked for precision with 15 measurements for each compound. Relative standard deviations were 1.9% for phenanthrene and 2.9% for benzo(a)pyrene, which shows that the proposed method is quite precise.     

The solid-matrix room-temperature luminescence detection and characterization of polyaromatic hydrocarbons without a heavy atom

A selective and sensitive method to detect polyaromatic hydrocarbons (PAH) using a new solid-matrix room-temperature luminescence technique is presented. The solid-matrix room-temperature fluorescence (SMRTF) and phosphorescence (SMRTP) of PAH can be readily obtained by adsorbing a PAH on Whatman 1PS filter paper. Strong phosphorescence can be detected without adding a heavy atom. Detection limits, ranging from 0.12 to 18 ng, were obtained for several PAH.     

Penetration of mercury-adsorbed phospholipid monolayers by polynuclear aromatic hydrocarbons

The penetration of phospholipid monolayers (dioleoyl lecithin) adsorbed on mercury by polynuclear aromatic hydrocarbons (PAH) is described. The PAH studied were anthracene, phenanthrene, pyrene, benzo[a]anthracene, fluoranthene and perylene. The penetration is monitored by measuring the differential capacitance of the monolayer; the uptake of PAH causes a potential shift (up to ?0.25 V) in the cathodic capacitance peaks. This occurs without displacement of the lipid from the mercury. The differential capacitance is measured by out-of-phase (90°) a.c. voltammetry and rapid cyclic voltammetry. The PAH permeate the mercury-adsorbed lipid layers from dilute aqueous solution; the order of affinity is benzo[a]anthracene > fluoranthrene = pyrene > anthracene = phenanthrene. The rates of penetration vary for the different compounds and depend on their water solubility.     

Analysis for aromatic compounds on paper and thin-layer chromatograms by spectrophotophosphorimetry : Application to air pollution

A technique is introduced in spectrophosphorimetric analysis by means of which spectra can be obtained directly on an adsorbent after chromatography. Spectra of the phosphorescent compound, its salts, its reduced or oxidized forms, or its derivatives can be obtained in all types of solvents. Examples of this simple technique are given ; detection limits range from 0.1 ng to mg amounts. A new system for the circular paper Chromatographic separation of aza heterocyclic hydrocarbons using aqueous formamide is described. Many of these heterocyclic compounds can be separated from each other as can the parent compounds from their alkyl derivatives. Air pollution mixtures separated by column and paper chromatography are analysed with the phosphorimetric technique. Spots obtained on the paper chromatograms are analyzed directly in the phosphorimeter. With these techniques benzo-(f) quinoline, benzo(h)quinoline, benz(a)acridine, benz(c)acridine, and hydrocarbons such as phenanthrene and benzo(e)pyrene are readily characterized.     

Time-resolved laser-induced fluorimetry for screening polycylic aromatic hydrocarbons on solid-phase extraction membranes

The potential of solid-phase extraction (SPE) time-resolved laser-induced fluorimetry (TRLIF) is evaluated for screening polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. Octadecyl membranes are used with the dual purpose of extracting the pollutants from the water sample and serving as the solid substrate for fluorescence detection. Excitation of fluorescence is performed with a Nd:YAG pumped tunable dye laser pumped with a pulsed source for time-resolving spectral interference. Wavelength time matrices (WTMs) and real time-resolved fluorescence spectra are recorded with a pulsed delay generator, a spectrograph and an intensified charge-coupled device (ICCD). In comparison to SPE solid-matrix luminescence (SML) with conventional instrumentation, this approach provides better limits of detection (LOD) and selectivity. The improvement in LOD is of one order of magnitude, reaching the parts-per-trillion level with 10 ml of water sample. The improvement in selectivity allows the direct determination of target compounds in complex samples. The direct determination of benzo[a]pyrene from a spiked river water sample of unknown composition is presented.     

New approach for screening polycyclic aromatic hydrocarbons in water samples

For the first time, solid-phase extraction (SPE) has been combined to room-temperature phosphorimetry (RTP) to determine the 16 polycylic aromatic hydrocarbons related as major pollutants by the US Environmental Protection Agency (EPA). These include naphthalene, anthracene, acenaphthylene, acenaphthene, fluorene, fluoranthene, benzo(a)anthracene, benzo(k)fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, pyrene, chrysene, phenanthrene, benzo(g,h,i)perylene and dibenzo(a,h)anthracene. The pre-concentration factor obtained by SPE, combined with the sensitivity of RTP, resulted in calibration curves with linear dynamic ranges at the parts-per-billion level (ng ml(-1)). The limits of detection were estimated at the parts-per-trillion level (pg ml(-1)). Several pollutants usually encountered in water samples were tested for interference. These included polychlorinated biphenyls, pesticides, and volatile organic compounds. As a result of the appropriate combination of excitation wavelength (330 nm) and phosphorescence enhancers (0.1 M TlNO(3) and 0.05 M sodium dodecyl sulfate, SDS), no interference was observed. The results demonstrate the potential of SPE-RTP for screening polycyclic aromatic hydrocarbons (PAHs) in environmental waters.     

Electrochemical DNA biosensor for polycyclic aromatic hydrocarbon detection

Four DNA electrochemical biosensors using four types of DNA (calf thymus ssDNA, calf thymus dsDNA, salmon testis ssDNA and salmon testis dsDNA) were constructed using graphite screen printed electrodes. These biosensors were exploited as analytical tool to detect polycyclic aromatic hydrocarbons-DNA interactions using benzo(a)anthracene and phenantrene as model analytes, the guanine oxidation peak variation being the signal revealing the interaction between PAHs and immobilized DNA. The salmon testis ssDNA biosensor resulted as the most promising device and was further evaluated for benzo(a)anthracene, fluorene, indeno(1,2,3-cd)pyrene, anthracene, and phenanthrene in 5–40 ng mL^?1 solutions, and for benzo(a)pyrene (5–50 ng mL^?1). A concentration dependent variation of the DNA guanine oxidation peak was observed for all compounds. The effect of benzo(a)pyrene ultraviolet (UV) activation on the benzo(a)pyrene (BaP)-DNA interaction was evaluated at concentration levels of 20 and 50 ng mL^?1, and a 3.5- and 2.7-fold increases of the guanine oxidation peak was measured respectively. The salmon testis ssDNA biosensor was examined with PAHs contaminated samples of Mytilus galloprovincialis. Upon UV irradiation of three sample extracts exceeding the BaP maximum level, a positive variation of the DNA guanine oxidation was obtained. An average 2.4-fold increase of the guanine oxidation peak was detected demonstrating that the sensor can be used to detect toxic degradation products of PAHs.     

Room-temperature phosphorescence of several polyaromatic hydrocarbons

The room-temperature phosphorescence of several polyaromatic hydrocarbons (anthracene, coronene, phenanthrene, pyrene, benzo[a]pyrene) and carbazole on paper support has been investigated. Heavy-atom solvents such as silver nitrate and sodium iodide were found to have specific effects in inducing phosphorescence emission from these compounds.     

Polycyclic aromatic hydrocarbons (PAHs) in edible oils by gas chromatography coupled with mass spectroscopy

The occurrence of polycyclic aromatic hydrocarbons (PAHs) in nine edible oils of three categories of oil samples, such as soy bean oil, mustard oil and coconut oil, has been studied to determine the contamination degree of this type of oil samples. Eight major carcinogenic polycyclic aromatic hydrocarbons (PAHs), such as naphthalene, anthracene, phenanthrene, fluorene, pyrene, crysene, benzo(a)pyrene and benzo(a)anthracene, were identified and quantified in the extract of edible oils collected from Bangladeshi Markets by gas chromatography and mass spectroscopy. All of the carcinogenic PAHs are not present in the edible oils. A few of the carcinogenic PAHs are present in the oils but it is within the permissible limit. The results for the recoveries of naphthalene, fluorene, phenanthrene, anthracene, pyrene, crysene, benzo(a)anthracene and benzo(a)pyrene were in the range of 56–84%. The limit of detection (LOD) of the GC–MS method, established at signals three times that of the noise for naphthalene, fluorene, phenanthrene, anthracene, pyrene, crysene, benzo(a)anthracene and benzo(a)pyrene, was 2.0–2.5 ng, respectively.     

Resolution of 13 polycyclic aromatic hydrocarbons by constant-wavelength synchronous spectrofluorometry.

A method capable of determining 13 PAHs (acenaphthene, anthracene, benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, dibenzo[ah]anthracene, fluoranthene, fluorene, indene[1,2,3-cd]pyrene, phenanthrene and pyrene) in a mixture of 16 EPA PAHs by second derivative synchronous spectrofluorometry in the constant wavelength mode was developed. It has not been possible to determine the following PAHs in the mixture: acenaphthylene, benzo[ghi]perylene and naphthalene. The approach studied allows the sensitive, rapid and inexpensive identification and quantitation of 13 PAHs in a solution of hexane. The detection limits are <1 microg L(-1) (except for chrysene and phenanthrene).     

Gel-based immunoassay for non-instrumental detection of pyrene in water samples

A new qualitative immunologically based tube test for non-instrumental detection of pyrene (PYR) in water samples was developed. The method combines the pre-concentration of analyte by immunoextraction and its detection by immunoassay using Sepharose 4B-immobilized IgG-fraction of a polyclonal anti-PYR antiserum (immunoaffinity gel) and 1-pyrenebutyric acid-horseradish peroxidase conjugate (PYR-BA-HRP). The immunoaffinity gel was placed in a standard 1-ml SPE column through which a 10-ml aliquot of water sample spiked with 10% acetonitrile was passed. Following, free antibody binding sites were detected by application of PYR-BA-HRP. Four minutes after addition of the chromogenic substrate the results were visually evaluated by occurring or stayed away blue colour development for negative and positive samples, respectively. Total time for assay was about 15 min for six samples. Under optimized conditions a cut-off level for pyrene of 0.04 ng ml(-1) was found. At this defined concentration, a set of spiked samples (n=175) was analyzed and very low rates of false negatives (1.2%) and false positives (4.6%) determined which fulfils the requirement set by Commission Decision 2002/657/EC for a screening method. No interference by other PAH compounds like naphthalene, fluoranthene, phenanthrene, anthracene, and benzo[a]pyrene at a concentration of 20 ng ml(-1), i.e., 500-fold excess compared to the defined cut-off level was observed. Different water types like surface water, tap water, bottled water, and melted snow were analyzed for PYR contamination by the proposed method and results confirmed by HPLC-FLD.     

Validation of a method for extraction of polycyclic aromatic hydrocarbons from sewage sludge and analysis by GC-MS

In the present study, the solid–liquid extraction with low temperature purification was validated for the determination of 16 polycyclic aromatic hydrocarbons from sewage sludge by gas chromatography-mass spectrometry. Recoveries ranged 70–114% for naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, while the compounds benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[g,h,i]perylene showed recoveries of between 40 and 70%. The relative standard deviation was less than 13% for all of the compounds. Negative matrix effect was observed on the 10 compounds with less retention time in the chromatographic analysis and positive matrix effect noticed on the others. The limits of quantification were from 2 to 20 μg kg^?1, about 30 times less than the maximum residue limit allowed in sludge by the European Union. The validated method produced quantification of 11 PAHs in one sludge sample at concentrations ranging 20–2000 μg kg^?1.     

Multivariate calibration applied to synchronous fluorescence spectrometry. Simultaneous determination of polycyclic aromatic hydrocarbons in water samples

Synchronous fluorescence spectra of mixtures containing ten polycyclic aromatic hydrocarbons (anthracene, benz[a]anthracene, benzo[a]pyrene, chrysene, fluoranthene, fluorene, naphthalene, perylene, phenanthrene and pyrene) have been used for the determination of these compounds by Partial Least Squares Regression (PLSR), using both PLS-1 and PLS-2. Different procedures have been used for the pretreatment of the data in order to obtain better models, and the size of the calibration matrix has also been studied. The best models have been used for the determination of the above mentioned PAHs in spiked natural water samples at concentration levels between 4 and 20 ng ml⁻¹. Recoveries ranged from 80 to 120% in most cases, although fluorene gave significantly lower results.     

Complexation and extraction of PAHs to the aqueous phase with a dinuclear Pt(II) diazapyrenium-based metallacycle

New palladium and platinum metallacycles have been synthesized by reaction between a 2,7-diazapyrenium-based ligand and Pd(II) and Pt(II) complexes. The inclusion complexes between the metallacycles and polycyclic aromatic hydrocarbons (PAHs) in CD(3)NO(2) and D(2)O were studied by NMR spectroscopy. The structures of the inclusion complexes of the Pt metallacycle as host with pyrene, phenanthrene, and triphenylene were confirmed by single crystal X-ray crystallography. The association constants between the Pt metallacycle and the selected PAHs were determined in CH(3)CN following the characteristic charge-transfer band displayed in their UV/Vis absorption spectrum. Although in aqueous solution all the complexes showed a 1:1 stoichiometry, in CH(3)CN the Job plot indicated a 2:1 stoichiometry for complexes with triphenylene and benzo[a]pyrene. The estimated association constants in water correlate with the hydrophobicity of the PAH, indicating that hydrophobic forces play an important role in the complexation process.     

Separation and characterization of tetrol metabolites of benzo[a]pyrene-DNA adducts using HPLC and solid-matrix room temperature luminescence

Four tetrols of benzo[a]pyrene-DNA adducts were separated using reversed-phase high performance liquid chromatography. Chromatographic fractions containing a given tetrol were readily characterized with solid-matrix room temperature luminescence techniques. Solid-matrix fluorescence and phosphorescence spectra at picogram amounts of a tetrol were easily obtained. Tetrol fractions collected based on retention times, but with no response from the ultraviolet detector, were characterized by solid-matrix luminescence spectra at very small quantities.     

Microheterogeneity evaluation of polycyclic aromatic hydrocarbons in particulate standard reference materials

With the emergence of highly sensitive analytical techniques, the microanalysis of natural-matrix materials employing smaller sample sizes is increasingly more common, which subsequently warrants a homogeneity assessment for the individual components at the appropriate sampling level. Pressurized liquid extraction (PLE) in combination with gas chromatography/mass spectrometry (GC/MS) has been used to determine the sampling constants and evaluate the relative homogeneity of trace levels of polycyclic aromatic hydrocarbons (PAHs) for two previously certified particulate standard reference materials, SRM 1649a Urban Dust and SRM 1650b Diesel Particulate Matter, in the milligram sampling range. Fluoranthene, pyrene, benz[a]anthracene and benzo[e]pyrene within SRM 1650b Diesel Particulate Matter were deemed to be homogeneous, based on relatively small sampling constants (K _S<100 mg), whereas the larger sampling constants (K _S>100 mg) obtained for all PAHs in SRM 1649a Urban Dust suggest more material heterogeneity. The material heterogeneity of ten individual PAHs (phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, benzo[k]fluoranthene, benzo[e]pyrene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was also described via nonlinear relationships (i.e., power law) between subsampling error S _s (%) and sample mass, which are used to predict analyte-specific minimum sample masses that result in a specific level of analytical uncertainty. Electronic supplementary material Supplementary material is available for this article at and is accessible for authorized users.     

Solid-surface phosphorescence characterization of polycyclic aromatic hydrocarbons and selective determination of benzo(a)pyrene in water samples

This paper presents the phosphorescence characterization of polycyclic aromatic hydrocarbons (PAHs) on solid-surface for obtaining new flow-through phosphorescence optosensors for PAHs-based on-line, immobilized onto a non-ionic resin solid support coupled to a continuous flow system and the applications for the selective determination of benzo(a)pyrene (BaP). The phosphorescent characterization of 15 PAHs, described as major pollutants by the Environmental Protection Agency (EPA) (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benzo(a)anthracene, benzo(k)fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, benzo(g,h,i)perylene and dibenzo(a,h)anthracene) has been carried out. The experimental variables (heavy atom, deoxygenation and organic solvent in samples) for obtaining different possibilities for developing mono and multi-parameter PAH sensors and the conditions for PAH screening have been carefully studied and the experimental conditions to determination of BaP in presence of other PAHs in water samples have been optimized.