Purification and Characterization of the Enzyme Cholesterol Oxidase from a New Isolate of Streptomyces sp.

An extracellular cholesterol oxidase (cho) enzyme was isolated from the Streptomyces parvus, a new source and purified 18-fold by ion exchange and gel filtration chromatography. Specific activity of the purified enzyme was found to be 20 U/mg with a 55 kDa molecular mass. The enzyme was stable at pH 7.2 and 50 °C. The enzyme activity was inhibited in the presence of Pb(2+), Ag(2+), Hg(2+), and Zn(2+) and enhanced in the presence of Mn(2+). The enzyme activity was inhibited by the thiol-reducing reagents (DTT, β-mercaptoethanol), suggesting that disulfide linkage is essential for the enzyme activity. The enzyme activity was found to be maximum in the presence of Triton X-100 and X-114 detergents whereas sodium dodecyl sulfate fully inactivated the enzyme. The enzyme showed moderate stability towards all organic solvents except acetone, benzene, chloroform and the activity increased in the presence of isopropanol and ethanol. The K(m) value for the oxidation of cholesterol by this enzyme was 0.02 mM.     

Purification and Properties of a New Thermostable Cyclodextrin Glucanotransferase from Bacillus pseudalcaliphilus 8SB

A new cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19) from an alkaliphilic halotolerant Bacillus pseudalcaliphilus 8SB was studied in respect to its γ-cyclizing activity. An efficient conversion of a raw corn starch into only two types of cyclodextrins (β- and γ-CD) was achieved by the purified enzyme. Crude enzyme obtained by ultrafiltration was purified up to fivefold by starch adsorption with a recovery of 62% activity. The enzyme was a monomer with a molecular mass 71 kDa estimated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and native PAGE. The CGTase exhibited two pH optima, at pH 6.0 and 8.0, and was at most active at 60 °C and pH 8.0. The enzyme retained more than 80% of its initial activity in a wide pH range, from 5.0 to 11.0. The CGTase was strongly inhibited by 15 mM Cu(2+), Fe(2+), Ag(+), and Zn(2+), while some metal ions, such as Ca(2+), Na(+), K(+), and Mo(7+), exerted a stimulating effect in concentration of 5 mM. The important feature of the studied CGTase was its high thermal stability: the enzyme retained almost 100% of its initial activity after 2 h of heating at 40-60 °C; its half-life was 2 h at 70 °C in the presence of 5 mM Ca(2+). The achieved 50.7% conversion of raw corn starch into 81.6% β- and 18.4% γ-CDs after 24 h enzyme reaction at 60 °C and pH 8.0 makes B. pseudalcaliphilus 8SB CGTase industrially important enzyme for cyclodextrin production.     

Purification and properties of bilirubin oxidase fromMyrothecium verrucaria

Bilirubin oxidase was purified from a culture filtrate of Myrothecium verrucaria Mv 2, 1089 by DEAE-cellulose and Sephadex G-100 column chromatographies. The purified enzyme had a specific activity of 30 U/mg protein and showed a single band on polyacrylamide gel electrophoresis. Some of the general properties of this bilirubin oxidase were as follows: the optimum pH for the enzyme reaction was 7.5 and the optimum temperature was 50 degrees C. The enzyme was stable at pH ranging from 9.0 to 9.5. The mol wt was calculated to be 61,900-62,700 by SDS-PAGE and gel-filtration technique. The apparent Km value of the bilirubin oxidase was calculated to be 9.4 x 10(-5) mol/L. The enzyme activity was greatly reduced by incubation of bilirubin oxidase with Fe2+, Hg+, NaN3, NH+4, and Zn2+. The enzyme reaction was inhibited in the presence of Ca2+, Hg+, Zn2+, Fe2+, and BSA.     

Talaromyces thermophilus β-d-Xylosidase: Purification, Characterization and Xylobiose Synthesis

When grown on wheat bran as the only carbon source, the filamentous fungus Talaromyces thermophilus produces large amounts of beta-xylosidase activity. The presence of glucose drastically decreases the beta-xylosidase production level. The beta-xylosidase of T. thermophilus was purified by ammonium sulfate precipitation, DEAE-cellulose chromatography, and gel filtration (high-performance liquid chromatography). The molecular mass of the enzyme was estimated to be 97 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis and gel filtration. The enzyme activity was optimum at 50 degrees C and pH 7. The apparent Michaelis constant K(m) of the beta-xylosidase was 2.37 mM for p-nitrophenyl-beta-D-xylopyranoside, with a V(max) of 0.049 micromol min(-1) per milligram protein. Enzyme activity was inhibited by Cu(2+), Hg(2+), and Zn(2+) and activated by Ca(2+), Mn(2+), and Co(+) at a concentration of 5 mM. At high xylose concentration, this enzyme catalyses the condensation reaction leading to xylobiose production.     

Purification and Biochemical Characterization of Methionine Aminopeptidase (MetAP) from Mycobacterium smegmatis mc2155

The methionine aminopeptidase (MetAP) catalyzes the removal of amino terminal methionine from newly synthesized polypeptide. MetAP from Mycobacterium smegmatis mc(2) 155 was purified from the culture lysate in four sequential steps to obtain a final purification fold of 22. The purified enzyme exhibited a molecular weight of approximately 37 kDa on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Activity staining was performed to detect the methionine aminopeptidase activity on native polyacrylamide gel. The enzyme was characterized biochemically, using L-methionine p-nitroanilide as substrate. The enzyme was found to have a temperature and pH optimum of 50 degrees C and 8.5, respectively, and was found to be stable at 50 degrees C with half-life more than 8 h. The enzyme activity was enhanced by Mg(2+) and Co(2+) and was inhibited by Fe(2+) and Cu(2+). The enzyme activity inhibited by EDTA is restored in presence of Mg(2+) suggesting the possible role of Mg(2+) as metal cofactor of the enzyme in vitro.     

Characterization of Cyclodextrin Glucanotransferase Produced by <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Cyclodextrin glucanotransferase, produced by Bacillus megaterium, was characterized, and the biochemical properties of the purified enzyme were determined. The substrate specificity of the enzyme was tested with different α-1,4-glucans. Cyclodextrin glucanotransferase displayed maximum activity in the case of soluble starch, with a K _m value of 3.4 g/L. The optimal pH and temperature values for the cyclization reaction were 7.2 and 60 °C, respectively. The enzyme was stable at pH 6.0–10.5 and 30 °C. The enzyme activity was activated by Sr²⁺, Mg²⁺, Co²⁺, Mn²⁺, and Cu²⁺, and it was inhibited by Zn²⁺and Ag⁺. The molecular mass of cyclodextrin glucanotransferase was established to be 73,400 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis, 68,200 Da by gel chromatography, and 75,000 Da by mass spectrometry. The monomer form of the enzyme was confirmed by the analysis of the N-terminal amino acid sequence. Cyclodextrin glucanotransferase formed all three types of cyclodextrins, but the predominant product was β-cyclodextrin.     

Production,purification, and characterization of a low-molecular-mass xylanase from Aspergillus sp. and its application in baking

An extracellular xylanase produced by a Mexican Aspergillus strain was purified and characterized. Aspergillus sp. FP-470 was able to grow and produce extracellular xylanases on birchwood xylan, oat spelt xylan, wheat straw, and corncob, with higher production observed on corncob. The strain also produced enzymes with cellulase, amylase, and pectinase activities on this substrate. A 22-kDa endoxylanase was purified 30-fold. Optimum temperature and pH were 60 degrees C and 5.5, respectively, and isoelectric point was 9.0. The enzyme has good stability from pH 5.0 to 10.0, retaining >80% of its original activity within this range. Half-lives of 150 min at 50 degrees C and 6.5 min at 60 degrees C were found. K(m) and activation energy values were 3.8 mg/mL and 26 kJ/mol, respectively, using birchwood xylan as substrate. The enzyme showed a higher affinity for 4-O-methyl-D-glucuronoxylan with a K(m) of 1.9 mg/mL. The enzyme displayed no activity toward other polysaccharides, including cellulose. Baking trials were conducted using the crude filtrate and purified enzyme. Addition of both preparations improved bread volume. However, addition of purified endoxylanase caused a 30% increase in volume over the crude extract.     

A new thermostable peroxidase from garlic Allium sativum

Analysis of peroxidase activity by native polyacrylamide gel electrophoresis (PAGE) from a garlic bulb (Allium sativum L) extract showed two major activities (designated POX1 and POX2). The POX2 isoenzyme was purified to homogeneity by ammonium sulfate precipitation, gel filtration, and cation-exchange chromatography. The purified enzyme was found to be monomeric with a molecular mass of 36.5 kDa, as determined by sodium dodecyl sulfate-PAGE. The optimum temperature ranged from 25 to 40 degrees C and optimum pH was about 5.0. The apparent Km values for guaiacol and H2O2 were 9.5 and 2 mM, respectively. POX2 appeared highly stable since 50% of its activity was conserved at 50 degrees C for 5 h. Moreover POX2 was stable over a pH range of 3.5-11.0. Immobilization of POX2 was achieved by covalent binding of the enzyme to an epoxy-Sepharose matrix. The immobilized enzyme showed great stability toward heat and storage when compared with soluble enzyme. These properties permit the use of this enzyme as a biosensor to detect H2O2 in some food components such as milk or its derivatives.     

Purification and Characterization of a Cu,Zn-SOD from Garlic (Allium sativum L.). Antioxidant Effect on Tumoral Cell Lines

Crude garlic extract contains one Mn-superoxide dismutase designated as SOD1 and two Cu,Zn superoxide dismutases as SOD2 and SOD3. The major isoform SOD2 was purified to homogeneity by Sephacryl S200-HR gel filtration, DEAE Sepharose ion exchange chromatography, and chromatofocusing using PBE 94. SOD2 was purified 82-fold with a specific activity of 4,960 U/mg protein. This enzyme was stable in a broad pH range from 5.0 to 10.0 and at various temperatures from 25 to 60°C. The native molecular mass of SOD2 estimated by high performance liquid chromatography on TSK gel G2000SW column was 39 kDa. Sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis showed a single band near 18 kDa, suggesting that native enzyme was homodimeric. The isoelectric point as determined by chromatofocusing was 5. Analysis of its N terminal amino acid sequence revealed high sequence homology with several other cytosolic Cu,Zn-SODs from plants. Exposure of cancer cell lines to garlic Cu,Zn-SOD2 led to a significant decrease in superoxide content with a concomitant rise in intracellular peroxides, indicating that the enzyme is active in mammalian cells and could, therefore, be used in pharmacological applications.     

Purification and properties of a SDS-resistant xylanase from halophilic Streptomonospora sp. YIM 90494

An extracellular xylanase from halophilic Streptomonospora sp. YIM 90494 was purified to homogeneity from a fermentation broth by ammonium sulphate precipitation, gel filtration chromatography and ion exchange chromatography. The purified xylanase appeared as a single protein band on SDS-PAGE with a molecular mass of approximately 50 kDa. The xylanase had maximum activity at pH 7.5 and 55 °C. The enzyme was stable over a broad pH range (pH 4.0–10.0) and showed good thermal stability when being incubated at 60 °C for 2 h. Kinetic experiments indicated that the enzyme had K _m and V _max values of 19.24 mg/mL and 6.1 μmol/min/mg, respectively, using birch wood xylan as substrate. The inhibitory effects of various metal ions and chemical agents on the xylanase activity were investigated. It is greatly interesting to note that Ag⁺ ion and SDS, which strongly inhibited most xylanases reported previously increases the xylanase activity in this study. These characteristics suggest that the enzyme with new properties has considerable potential in industrial applications.     

Purification and characterisation of α-amylase produced by mutant strain of Aspergillus oryzae EMS-18

α-Amylase produced by a mutant strain of Aspergillus oryzae EMS-18 has been purified to homogeneity as judged by sodium dodecyle sulphate polyacrylamide gel electrophoresis (SDS-PAGE). The enzyme was purified by using 70% ammonium sulphate precipitation followed by anion exchange chromatography on DEAE-Sephadex column and gel filtration on Sephadex G-100. An enzyme purification factor of 9.5-fold was achieved with a final specific activity of 1987.7 U/mg protein and overall yield of 23.8%. The molecular weight of purified α-amylase was estimated to be 48 kDa by SDS-PAGE. The purified enzyme revealed an optimum assay temperature and pH 40°C and 5.0, respectively. Except Ca⁺⁺ all other metal ions such as Mg, Mn, Na, Zn, Ni, Fe, Cu, Co and Ba were found to be inhibitory to enzyme activity.     

Purification and characterization of ginsenoside-beta-glucosidase from ginseng.

The ginsenoside-beta-glucosidase that hydrolyzes the beta-(1-->2)-glucoside of the ginsenoside Rg3 sugar moiety to ginsenoside Rh2 was isolated from the ginseng root, and the enzyme was purified and characterized. The enzyme was purified to one spot in SDS polyacrylamide gel electrophoresis, and its molecular weight was about 59 kDa. The optimum temperature of the ginsenoside-beta-glucosidase was 60 degrees C, and the optimum pH was 5.0. Ca2+ ion had positive effect on ginsenoside-beta-glucosidase, while Cu2+ had negative effect on it. The ginsenoside-beta-glucosidase may be a special beta-glucosidase that is different from the original exocellulase such as beta-glucosidase (EC 3.2.1.21).     

Purification and characterization of a solvent stable protease from Pseudomonas aeruginosa PseA

A solvent tolerant Pseudomonas aeruginosa PseA strain was isolated from soil. It secreted a novel alkaline protease, which was stable and active in the presence of range of organic solvents, thus potentially useful for catalysis in non-aqueous media. The protease was purified 11.6-fold with 60% recovery by combination of ion exchange and hydrophobic interaction chromatography using Q-Sepharose and Phenyl Sepharose 6 Fast Flow matrix, respectively. The apparent molecular mass based on the sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) was estimated to be 35,000 Da. The enzyme was stable in the pH range of 6.0-9.0, the optimum being 8.0. The Km and Vmax towards caseinolytic activity were found to be 2.7 mg/ml and 3 micromol/min, respectively. The protease was most active at 60 degrees C and characterized as a metalloprotease because of its sensitivity to EDTA and 1,10-phenanthroline. It was tested positive for elastase activity towards elastin-orcein, thus appears to be an elastase, which is known as pseudolysin in other strains of P. aeruginosa. The protease withstands range of detergents, surfactants and solvents. It is stable and active in all the solvents having log P above 3.2, at least up to 72 h. These two properties make it an ideal choice for applications in detergent formulations and enzymatic peptide synthesis.     

Cloning, expression, and characterization of thermostable region of amylopullulanase gene from Thermoanaerobacter ethanolicus 39E

The bifunctional activities of α-amylase and pullulanase are found in the cloned recombinant amylopullulanase. It was encoded in a 2.9-kb DNA fragment that was amplified using polymerase chain reaction from the chromosomal DNA of Thermoanaerobacter ethanolicus 39E. An estimated 109-kDa recombinant protein was obtained from the cloned gene under the prokaryotic expression system. The optimum pH of the recombinant amylopullulanase was 6.0. The most stable pH for the α-amylase and pullulanase activity was 5.5 and 5.0, respectively. The optimum temperature for the α-amylase activity was 90°C, while its most stable temperature was 80°C. Regarding pullulanase activity, the optimum temperature and its most stable temperature were found to be 80 and 75°C, respectively. Pullulan was found to be the best substrate for the enzyme. The enzyme was activated and stabilized by the presence of Ca²⁺, whereas EDTA, N-bromosuccinimide, and α-cyclodextrin inhibited its bifunctional activities. A malto-2–4-oligosac-charide was the major product obtained from the enzymatic reaction on soluble starch, amylose, amylopectin, and glycogen. A single maltotriose product was found in the pullulan hydrolysis reaction using this recombinant amylopullulanase. Kinetic analysis of the enzyme indicated that the K _m values of α-amylase and pullulanase were 1.38 and 3.79 mg/mL, respectively, while the V _max values were 39 and 98 μmol/(min · mg of protein), respectively.     

Purification and Characterization of Thermostable Chitinase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> SK-1

Chitinase was purified from the culture medium of Bacillus licheniformis SK-1 by colloidal chitin affinity adsorption followed by diethylamino ethanol-cellulose column chromatography. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular size and pI of chitinase 72 (Chi72) were 72 kDa and 4.62 (Chi72) kDa, respectively. The purified chitinase revealed two activity optima at pH 6 and 8 when colloidal chitin was used as substrate. The enzyme exhibited activity in broad temperature range, from 40 to 70°C, with optimum at 55°C. It was stable for 2 h at temperatures below 60°C and stable over a broad pH range of 4.0–9.0 for 24 h. The apparent K _m and V _max of Chi72 for colloidal chitin were 0.23 mg ml⁻¹ and 7.03 U/mg, respectively. The chitinase activity was high on colloidal chitin, regenerated chitin, partially N-acetylated chitin, and chitosan. N-bromosuccinamide completely inhibited the enzyme activity. This enzyme should be a good candidate for applications in the recycling of chitin waste.     

Purification, Sequencing, and Biochemical Characterization of a Novel Calcium-Independent α-Amylase AmyTVE from Thermoactinomyces vulgaris

α-Amylase from Thermoactinomyces vulgaris was highly purified 48.9-fold by ammonium sulfate precipitation, gel filtration on Sephadex G-50 column, and ion exchange chromatography column of DEAE-cellulose. The molecular weight of the enzyme was estimated to be 135 and 145 kDa by SDS–PAGE. Its high molecular weight is due to high glycosylation. The purified amylase exhibited maximal activity at pH 6.0 to 7.0 and was stable in the range of pH 4.0 to 9.0. The optimum temperature for its activity was 50 °C. The enzyme half-life time was 120 min at 50 °C, suggesting intermediate temperature stable α-amylase. The enzyme was sensitive to different metal ions, including NaCl, CoCl₂, and CaCl₂, and to different concentrations of EDTA. The enzyme activity was inhibited in the presence of 1 mM CaCl₂, suggesting that it is a calcium-independent α-amylase. The TLC showed that the amylase hydrolyzed starch to produce large maltooligosaccharides as the main products. A 1.1-kb DNA fragment of the putative α-amylase gene (amy TVE) from T. vulgaris was amplified by using two specific newly designed primers. Sequencing analysis showed 56.2 % similarity to other Thermoactinomyces α-amylases with two conserved active sites confirming its function.     

Biochemical Characterization of Raw-starch-digesting Alpha Amylase Purified from <Emphasis Type="Italic">Bacillus amyloliquefaciens</Emphasis>

Alpha amylase (E.C. 3.2.1.1) of Bacillus amyloliquefaciens produced by submerged fermentation was purified to near homogeneity by ion exchange chromatography. Through the process 38.6-fold increase in purity with a specific activity of 72 U/mg proteins was obtained. The apparent molecular weight of the purified enzyme was found to be 58 kDa by SDS-PAGE. The enzyme was relatively stable between pH 5.0–8.0 and temperature between 50 and 60°C. The enzyme did not show any obligate requirement of metal ions but Ca²⁺ and Cu²⁺ enhanced the enzyme activity marginally and the thermostability was enhanced in the presence of Ca²⁺ ions. The purified enzyme exhibited maximal substrate specificity for amylose and efficiency in digesting various raw starches. The K _m and V _max of the enzyme was determined using both amylose and soluble starch as substrate. The analysis of the hydrolyzed products of soluble starch by thin layer chromatography showed the yield of maltosaccharides after 6 h of hydrolysis.     

Gravimetric determination of cadmium with N-phenylbenzohydroxamic acid

A quantitative gravimetric determination of cadmium in presence of Ag(+), Be(2+), Pb(2+), Mn(2+), Ni(2+), Cu(2+), Zn(2+), Hg(2+), Pd(2+), Ga(3+), Al(3+), Bi(3+), Sb(3+), La(3+), Ti(4+), Zr(4+), V(5+), Mo(6+) and U(6+) was made by selective precipitation with N-phenylbenzohydroxamic acid from a solution containing 6-15 mg of cadmium acetate at pH 5.8-6.5. The precipitate was weighed directly after drying at 110-120 degrees . The cadmium complex is curdy white, granular and melts at 225 degrees. The analytical results indicate the complex to be (C(13)H(10)NO(2))(2)Cd.     

Isolation,purification, and further characterization of an L-phenylalanine oxidase fromMorganella morganii

A l-amino acid oxidase was isolated, purified, and characterized fromMorganella morganii 53187, a bacterium formerly known asProteus morganii. The synthesis of the enzyme by this bacterial strain was growth-associated and decreased sharply when the culture just reached the stationary phase. Based on this finding, the preparation of spheroplast by lysozyme-ethylene-diaminetetra-acetic acid (EDTA) disruption was carried out using the cells harvested during the exponential growth phase. Among several detergents tested, at the detergent-to-protein ratio of 2.5, 3-[(3-cholamidopropyl)dimethylammonio]-l-propane-sulfonate (CHAPS) was very effective in solubilizing most of the enzyme attached to the membranes while still preserving the activity of the solubilized enzyme. The resulting enzyme solution was then purified by hydrophobic interaction chromatography, followed by ion exchange chromatography and gel permeation. The enzyme was purified 19-fold with an overall recovery yield of 12%, corresponding to a specific activity of 252.2 U/mg protein. The selectivity of the purified enzyme toward l-amino acids was pH-dependent. At pH 6.35, the enzyme was very specific to l-leucine, whereas the selectivity for l-phenylalanine could be improved at pH 7.4. The enzyme exhibited a wide optimum temperature range 35–43?C and exhibited 1, l?dimethylferricinium reductase capability in the presence of l-phenylalanine.     

Purification of α-Amylase from Bacillus sp. GHA1 and its partial characterization

Bacillus sp. GHA1 was isolated from water samples and screened for the production of α-amylase. Maximum production of amylase by this strain occurs at 42 °C, pH 6.5 and 72 h after cultivation in production medium. The enzyme was purified through successive applications of ammonium sulfate precipitation, ion exchange and hydrophobic interaction chromatography, resulting in a single band with an apparent molecular weight of 66 kDa, as judged by SDS-PAGE. Calcium analysis of the purified enzyme revealed that it contained three metal ions per molecule. The new extracellular α-amylase is active in a wide range of pH with its maximum activity at pH values 5.5–8.0. The optimum temperature for enzyme activity is 57 °C and the presence of calcium has relatively low influence on its activity and thermostability. The Bacillus sp. GHA1 α-amylase with these properties may be suitable for use in detergent and food industries.