Pulse-induced mechanoluminescence of ultraviolet-irradiated SrAl2O4:Eu,Dy phosphors

The SrAl₂O₄:Eu,Dy phosphors prepared by solid state reaction technique in a reduced atmosphere of 95% Ar+5% H₂ exhibit very intense mechanoluminescence (ML) which can be seen in daylight with naked eye. When the phosphors are deformed by the impact of a low-power electric hammer, initially the ML intensity increases with time, attains a maximum value and then decreases with time. After the threshold pressure, the peak of ML intensity I_m and the total ML intensity I_T increase with the increasing value of the impact pressure. For the ML excited by the pressure pulse of short duration, two decay times of ML are observed; however, for the ML excited by the pressure pulse of long duration, only one decay time is observed. The ML intensity decreases with successive applications of pressure on SrAl₂O₄:Eu,Dy phosphors. For the low applied pressure in the range below the limit of elasticity recovery of ML intensity takes place when the sample is exposed to ultraviolet (UV) light. This fact indicates that the vacant traps produced during the application of pressure pulses get filled during the exposure of the sample to UV light. The ML in the elastic region of SrAl₂O₄:Eu,Dy phosphors can be understood on the basis of the piezoelectrically induced detrapping model. The non-irradiated SrAl₂O₄:Eu²⁺,Dy³⁺ phosphors exhibit ML during the fracture of the compact mass of phosphors whose ML intensity is less when compared to that of the UV-irradiated compact masses. The ML induced by pressure pulses may be useful for determining the magnitude and rise time of unknown pressure pulses and to determine the lifetime of charge carriers in shallow traps.     

Emission characteristics of inorganic/organic hybrid white-light phosphor

A white-light light-emitting diode (LED) was successfully fabricated by converting near-UV LED emission (390–420 nm) with a new inorganic/organic hybrid phosphor. This new white-light phosphor consisted of three fluorescence materials; two strontium aluminates based with lanthanide oxides, SrAl₂O₄:Eu²⁺ (for green (520 nm) emission) and Sr₄Al₁₄O₂₅:Eu²⁺ (for blue (490 nm) emission) and a new organic Eu metal complex, Eu(BTFA)₃phen (for red (614 nm) emission). These materials have good absorption in the 300–500-nm range and have high quantum efficiencies (4.7–24.5%). The white phosphor has a CIE value of (0.321, 0.365). PACS 42.70.-aj; 78.40.-q; 78.55.-m; 81.05.Lg     

Spectroscopic and Structural Properties of Ca1-xSrxAl2O4:Eu2☎, RE3☎ Persistent Luminescence Materials

The preparation, structure and luminescence of the Ca_1-xSr_xAl₂O₄:Eu^2?, RE^3? system were studied. Monoclinic CaAl₂O₄ was the major phase when the strontium content x was from 0 to 0.6, but hexagonal SrAl₂O₄ was obtained when x was 0.8 and monoclinic SrAl₂O₄ when x was 1. Only slight Ca/Sr cation solid solubility was observed. The strontium ions dissolved better into the CaAl₂O₄ phase than vice versa. Two luminescence bands were observed for mixed compositions, peaking at 440 and 530 nm, corresponding to those of the monoclinic CaAl₂O₄:Eu^2? and hexagonal SrAl₂O₄:Eu^2? ones. The persistent luminescence was enhanced by the Ca/Sr replacement. This observation supports the mechanisms where the lattice defects act as traps.     

Optimizing after-glow luminescent parameters of Sr<Subscript>4</Subscript>Al<Subscript>14</Subscript>O<Subscript>25</Subscript>:Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript>, by sol–gel method and combustion process

Strontium aluminates are viewed as a promising persistent luminescent materials. There are many researches on strontium aluminates, including SrAl₂O₄, Sr₄Al₁₄O₂₅. Between these two phases, Sr₄Al₁₄O₂₅ shows much better properties than SrAl₂O₄. The traditional way to synthesize Sr₄Al₁₄O₂₅ is the solid state reaction. However, it exists few problems, especially non-homogeneous product. As a result, there are two methods chosen to make homogeneous precursor. One is sol–gel method, the other is combustion with Urea as a fuel. Boric acid is added as a flux in both method. In this study, combustion process is found to be a better way for synthesizing Sr₄Al₁₄O₂₅. We change the temperature, synthetic method. The samples are finely grinded and used for XRD analysis, photoluminescence measurement, and after-glow decay curve to figure out the optimizing luminescent parameters.     

Sm共掺对Sr4Al14O25:M (M=Mn4+, Cr3+）荧光粉发光性能的影响

用固相反应法合成了Sr₄Al₁₄O₂₅:M和Sr₄Al₁₄O₂₅:(M+Sm³⁺)(M=Mn⁴⁺, Cr³⁺)荧光粉, 研究了其发光性能．Sm的共掺并没有改变Sr₄Al₁₄O₂₅:Cr³⁺激发带和发射带的位置, 但是显著提高了材料的发光性能;Sm共掺Sr₄Al₁₄O₂₅:Mn⁴⁺反而降低了发光强度． 对于Cr³⁺, Sm³⁺共掺的Sr₄Al₁₄O₂₅荧光粉, 呈现了从Sm³⁺到Cr³⁺ 的辐射形式的能量传递过程,说明了Sm的共掺对于Sr₄Al₁₄O₂₅:Cr³⁺荧光粉的发光强度提高的原因．     

Red emission in B- and Li-doped SrAl2O4:Eu phosphor under UV excitation

Samples of SrAl₂O₄:Eu³⁺ doped with B³⁺ and SrAl₂O₄:Eu³⁺ co-doped with B³⁺ and Li⁺ have been prepared by the solid-reaction method. The influence of B³⁺ and Li⁺ contents on luminescence property has been investigated. It is found that the substitution of B³⁺ for Al³⁺ greatly improves red emission intensity at 591, 615 and 701 nm. The dopant Li⁺ as charge compensator in SrAl₂O₄:Eu³⁺, B³⁺ can further enhance luminescence intensity. The strongest red emission is obtained in the Sr(Al_1.9, B_0.1)O₄:Eu_0.02³⁺, Li⁺_0.02 sample. The developed phosphors can be efficiently excited by ultraviolet (UV) light from 350 to 480 nm, which indicates that B³⁺ and Li⁺ co-doped SrAl₂O₄:Eu³⁺ is a good candidate phosphor applied in solid-state lighting in conjunction with white UV light-emitting diodes (LEDs).     

Temperature-dependence of the structural and afterglow luminance properties of polymer/SrAlxOy:Eu,Dy composites

Although aluminate phosphors have attracted great interest for applications in lamps, cathode ray tubes and plasma display panels, there still remain issues affecting operational parameters such as luminescence efficiency, stability against temperature, high color purity and perfect decay time. In addition, issues involving important aspects of the monoclinic↔hexagonal phase transition temperature still exist. In this work, SrAl_xO_y:Eu²⁺,Dy³⁺ phosphor powders were prepared by the sol–gel method. X-ray diffraction (XRD) has shown that both crystallinity and crystallite sizes increased as the temperature increased. Both SrAl₂O₄ and Sr₂Al₃O₆ phases were observed. Photoluminescence (PL) characterization shows temperature-dependence, which indicates emission at low and high annealing temperatures originating from Eu²⁺ and Eu³⁺ ions. Thermoluminescence glow and decay measurements provided useful insight on the influence of traps on luminescence behavior. Differential scanning calorimetry (DSC) and thermogravimetric studies (TGA) on composites of the phosphor in low density polyethylene (LDPE) demonstrated the varied influence of annealing temperature on some luminescence and thermal properties.     

Photoluminescence of Eu single doped and Eu/Dy codoped Sr2Al2SiO7 phosphors with long persistence

This paper reports the preparation of long persistent Sr₂Al₂SiO₇:Eu²⁺ and Sr₂Al₂SiO₇:Eu²⁺, Dy³⁺ phosphors and the comparison of their photoluminescent properties. The silicate phosphors prepared by solid-state reaction routine showed a broad blue emission peaking at 484 nm when activated by UV illumination. Such a bluish-green emission can be attributed to the intrinsic 4f-5d transitions of Eu²⁺. After the UV source was switched off, long persistent phosphorescence could be observed by naked eyes for both samples in darkness. Afterglow measurements revealed that Eu/Dy codoped phosphor possesses better afterglow properties than the Eu single doped one, since the maximum lifetime (τ_max=99 s) of the photons calculated from the decay profile is much larger than that of the Eu single doped phosphor (τ_max=82 s). TSL results suggested that the difference in afterglow properties was caused by the difference in the electron traps within the crystal lattice. For Eu/Dy codoped phosphor, the doping of Dy ions produced electron traps with trap depth of 0.52 eV, which is suitable and therefore leads to good persistence. However, in the case of Eu single doped phosphor, the trap depth is 0.88 eV, which is really too deep an energy barrier to overcome, and therefore a poor persistence was observed in the experiment.     

应力发光材料Sr2SiO4∶Eu,Dy的光谱性质研究

采用高温固相法制备一系列Sr₂SiO₄∶Eu_0.01, Dy_x(x=0.000 1, 0.002 5, 0.005, 0.01)应力发光材料,研究了不同掺杂浓度下,Sr₂SiO₄∶Eu, Dy的光致发光和应力发光性质。研究结果表明在掺杂Dy3+浓度较低时,样品同时存在α和β两种相,当掺杂Dy3+浓度增加时,则出现β到α的相转变。由于Eu2+占据Sr2+格位的不同,样品在蓝光区486 nm(Sr1)和绿光区530 nm(Sr2)有两个峰存在。而应力发光光谱与余辉光谱类似,均只呈现出530 nm的发光,这说明二者的发光来源于占据Sr2格位的Eu2+,都是通过改变陷阱的浓度实现发光性能的变化,但Sr₂SiO₄∶Eu, Dy的应力发光强度的变化还与其结构改变有关。同时,Sr₂SiO₄∶Eu, Dy应力发光强度与所施加的力之间呈良好的线性关系,并且可用眼睛观察到明显的黄色应力发光,这为应力发光传感器准确检测物体所受应力提供依据。结合余辉、热释以及应力发光性质,推测Sr₂SiO₄∶Eu, Dy的应力发光机制应是压电产生的电致发光。     

Orange emission enhancement by energy transfer in Sr3Al2O5Cl2:Ce, Eu phosphor for solid-state lighting

Orange-emissive Ce³⁺/Eu²⁺ co-doped Sr₃Al₂O₅Cl₂ phosphors were synthesized by a solid-state reaction. The large overlap between the emission spectrum of blue Sr₃Al₂O₅Cl₂:Ce³⁺ and the excitation spectrum of orange Sr₃Al₂O₅Cl₂:Eu²⁺, and the shortening trend in lifetime of Ce³⁺ donors with increasing Eu²⁺ concentration in Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ provide the strong evidence of energy transfer from Ce³⁺ to Eu²⁺ ions. It supports that the orange emission intensity of the optimal co-doped phosphor is 1.5 times stronger than that of single Eu²⁺-doped one. The Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ phosphor is a promising orange-emitting phosphor for warm-white-light-emitting diode because of its effective excitation in the near ultraviolet range.     

Strong mechanoluminescence induced by elastic deformation of rare-earth-doped strontium aluminate phosphors

When rare-earth-doped strontium aluminate phosphor mixed in an epoxy resin, is deformed elastically by applying a uniaxial pressure, then initially the mechanoluminescence (ML) intensity increases with time, attains a peak value I_m at a particular time t_m, and later on it decreases with time. After t_m, initially, the ML intensity decreases exponentially at a fast rate and then it decreases exponentially at a slow rate. The ML appears after a threshold pressure and then, initially at low pressure, the peak intensity I_m of ML increases linearly with the magnitude of applied pressure, and for high pressure, I_m increases exponentially with the magnitude of applied pressure. The value of I_m increases linearly with the density of filled hole traps. The ML emission also takes place during the release of applied pressure. There should be a significant effect of temperature on the ML intensity of rare-earth-doped strontium aluminate phosphors. The ML intensity of rare-earth-doped strontium aluminates decreases with successive number of the applications of pressure and the diminished ML intensity can be recovered with the exposure of the samples to UV-radiation. The ML spectra of rare-earth-doped strontium aluminate phosphors are similar to their photoluminescence spectra. As only the piezoelectric-phase of the strontium aluminate phosphors exhibit ML during their elastic deformation, the ML emission can be attributed to the piezoelectrification of the crystals. Considering that the piezoelectric field causes decrease in the trap-depth of the hole traps and, therefore, the holes transferred from traps to the valence band recombine with (Eu¹⁺)^* ions, whereby the Eu²⁺ ions are excited, expressions are derived for different parameters of ML, which are able to satisfactorily explain the experimental results. It is shown that the lifetimes of holes in the shallow traps in stressed and unstressed materials, and the threshold pressure P_t for the ML emission, and other parameters of the ML, can be determined from the ML measurements. Finally, the criteria for tailoring strong elasico-mechanoluminescent materials are explored.     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法     

Dynamic visualization of stress distribution on metal by mechanoluminescence images

We have successfully demonstrated that the stress distribution of a metal material can be directly displayed by coating the surface of test objects with an upgraded strong mechanoluminescence (ML) material of SrAl₂O₄:Eu (SAO). In this paper an aluminum plate with the SAO sensing film was applied to experimental analysis of stress concentrations. And the comparison with a numerical analysis showed that the ML intensity of SAO sensing film correlates linearly with stress on metal surface and the observed real-time ML images quantitatively reflect stress concentration. This novel visualisation technique can be applied to view stress concentration in various fields such as modelling, manufacturing and demonstration of industrial products as well as to point out danger areas in structural objects such as pipelines and bridges.     

Phosphorescent and thermoluminescent properties of SrAl2O4:Eu,Dy phosphors prepared by solid state reaction method

Long persistent SrAl₂O₄:Eu²⁺ phosphors co-doped with Dy³⁺ were prepared by the solid state reaction method. The main diffraction peaks of the monoclinic structure of SrAl₂O₄ were observed in all the samples. The broad band emission spectra at 497 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ were observed and the emission is attributed to the 4f⁶5d¹ to 4f⁷ transition of Eu²⁺ ions. The samples annealed at 1100–1200 °C showed similar broad TL glow curves centered at 120 °C. The similar TL glow curves suggest that the traps responsible for them are similar. The long afterglow displayed by the phosphors annealed at different temperatures, may be attributed to the Dy³⁺ ions acting as the hole trap levels, which play an important role in prolonging the duration of luminescence.     

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Effect of Sr2+-doping on structure and luminescence properties of BaAl2Si2O8:Eu2+ phosphors

Sr²⁺ doped BaAl₂Si₂O₈:Eu²⁺ phosphor was synthesized by chemical co-precipitation method. With the increase of Sr²⁺ concentration, the phase structure of (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ changes from hexagonal phase to monoclinic phase owing to large activation energy in SrAl₂Si₂O₈ system. (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ phosphor exhibits a broad blue band peaking at 425 nm due to the 4f⁶5d–4f⁷(⁸S_7/2) transition of Eu²⁺ ions. The emission intensity increases, accompanied by the blue shift of emission maximum from 459 to 417 nm with the Sr²⁺ doping concentration increasing. The optimal concentration of Sr²⁺ ion is 40%, and the phosphor shows high color stability in CIE chromaticity diagram. The result indicates that Sr²⁺ doped phosphor not only can enhance the relative intensity but also can adjust the chromaticity coordinate.     

Thermo-luminescence kinetic parameters of γ-irradiated Sr4Al14O25:Eu2+, Dy3+ phosphors

In this paper, we present a detailed investigation of the thermo-luminescence (TL) kinetics of the long afterglow phosphor, Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺, synthesized by the combustion method. Kinetic parameters such as the activation energy (E_α), the frequency factor (s) and the order of kinetics (b) were calculated using Chen's formulism. The crystalline structure of the phosphor was examined using X-ray powder diffraction and transmission electron microscopy. The average particle size was found to be in the range of 45–52 nm. The optimum dopant concentrations were Eu (1 mol%) and that of Dy (2 mol%). The TL response of the phosphor was monitored after the samples were irradiated with a γ-dose using a ⁶⁰Co source in the 20-800 Gy range. A broad TL peak, (stretching from 328 to 410 K) with a maximum at 368 K was observed. With increasing irradiation dose, the main peak shifts toward higher temperatures. Symmetry factor calculations show that the main TL glow peak obeys second-order kinetics, which could be attributed to the creation of deep level traps. This means that γ-ray irradiation greatly affects the distribution of traps in the Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ phosphor. The phosphor showed a linear response with γ-dose.     

Luminescent properties of stabled hexagonal phase Sr1−xBaxAl2O4:Eu (x=0.37-0.70)

Stabled hexagonal phase Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) was prepared by solid-state method. Result revealed that the structure behavior of the SrAl₂O₄:Eu²⁺ calcined at 1350 °C in a reducing atmosphere for 5 h strongly depended on the Ba²⁺ concentration. With increasing Ba²⁺ concentration, a characteristic hexagonal phase can be observed. When 37-70% of the strontium is replaced by barium, the structure of the prepared sample is pure hexagonal. Photoluminescence and excitation spectra of the samples with different x and doped with 2% Eu²⁺ were investigated. Changes in the emission spectra were observed in the two different phases. The green emission at 505 nm from Eu²⁺ was found to be quite strong in the hexagonal phase. The intensity and peak position of the green luminescence from Eu²⁺ changed with increasing content of Ba²⁺. The strongest green emission was obtained from Sr_0.61Ba_0.37Al₂O₄:Eu²⁺. The decay characteristics of Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) showed that the life times also varied with the value of x. Furthermore, the emission colors and decay times varying with x could be ascribed to the variation of crystal lattice.     

Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor

In this paper we report the combustion synthesis of trivalent rare-earth (RE³⁺ = Dy, Eu and Ce) activated Sr₄Al₂O₇ phosphor. The prepared phosphors were characterized by the X-ray powder diffraction (XRD) and photoluminescence (PL) techniques. Photoluminescence emission peaks of Sr₄Al₂O₇:Dy³⁺ phosphor at 474 nm and 578 nm in the blue and yellow region of the spectrum. The prepared Eu³⁺ doped phosphors were excited by 395 nm then we found that the characteristics emission of europium ions at 615 nm (⁵D₀?⁷F₂) and 592 nm (⁵D₀?⁷F₁). Photoluminescence (PL) peaks situated at wavelengths of 363 and 378 nm in the UV region under excitation at around 326 nm in the Sr₄Al₂O₇:Ce³⁺ phosphor.     

Effects of non-stoichiometry and substitution on photoluminescence and afterglow luminescence of Sr4Al14O25:Eu, Dy phosphor

The effects of nonstoichiometry and cationic substitution on photoluminescence and afterglow characteristics of strontium aluminate phosphor (Sr₄Al₁₄O₂₅:Eu²⁺, Dy³⁺) were investigated. Photoluminescence intensity of both the strontium-deficit and -rich phosphors was enhanced, but no definite correlation was observed between the afterglow intensity and non-stoichiometry. The photoluminescence emission maxima were either blue or green shifted in case of non-stoichiometric phosphors, whereas the afterglow emission maxima were not affected by the non-stoichiometry. Substitution of strontium by calcium resulted in white afterglow emission at higher calcium concentration. The emission centers in case of photoluminescence and afterglow emission appear to be different. Addition of silver significantly enhanced the afterglow intensity due to increased trap density.