单铌和单过氧铌杂多配合物的合成、表征及催化性能

过氧铌钨磷杂多酸盐;催化活性;单铌和单过氧铌杂多配合物的合成、表征及催化性能     

Keggin结构过氧铌钨磷杂多配合物的合成、表征及催化性能

钼钨的杂多化合物（HPC）在催化、电催化、分子材料、药物等诸多领域中已显示出独特的功能。含过氧金属离子取代的杂多阴离子在催化以过氧化氢为氧化剂的烯烃环氧化反应中具有很高的活性和选择性。近年来,含铌的杂多配合物由于良好的催化活性和抗病毒性,引起了人们的重视。本文合成了8种Keggin结构过氧铌钨磷杂多配合物,并用红外、紫外吸收光谱、极谱-循环伏安、及^183W NMR谱等测试手段对其结构和性质进行了确定和比较,考察了它们对烯烃环氧化反应的催化活性。     

过氧锆杂多化合物的合成、表征及催化活性

过氧锆钨硅杂多化合物;异构体;环氧化反应;催化活性;过氧锆杂多化合物的合成、表征及催化活性     

新型层柱化合物合成、表征及催化活性

将含过氧铌一、三取代钨硅、钨磷过氧杂多阴离子利用离子交换法嵌入Zn2Al类水滑石中制得层柱化合物,利用XRD,IR,UV等方法对产物的结构进行了表征。结果表明在层柱化合物中过氧杂多阴离子仍然保持Keggin结构,并且过氧键没被破坏。层柱化合物在酯化反应中显示优良的催化性能。     

过氧杂多阴离子型层柱化合物的合成、表征及催化活性

通过离子交换法,将含Zr过渡金属离子1,3取代钨硅、钨磷过氧杂多酸盐嵌入Zn2Al类水滑石中,获得了层柱化合物,并用XRD,IR,UV等手段对产物的结构进行了表征.结果表明过氧杂多阴离子进入水滑石层间后,水滑石的层间距从0.92增大到1.47 nm,且过氧链没被破坏.层柱化合物在酯化反应中显示优良的催化性能.     

过氧铌取代钨磷杂多配合物的稳定性

过氧铌取代钨磷杂多配合物的稳定性龚剑，魏永慧瞿伦玉（吉林医学院预防医学系吉林１３２００１）（东北师范大学化学系长春）关键词杂多配合物，过氧铌取代，Ｄａｗｓｏｎ结构，稳定性近年杂多配合物在新型催化剂的开发［１，２］，抗病毒［３］以及作为无机离子交换剂［...     

Dawson结构钨铌磷杂多配合物183WNMR谱的研究

Ｄａｗｓｏｎ结构钨铌磷杂多配合物~（１８３）ＷＮＭＲ谱的研究龚剑，瞿伦玉，陈亚光，李宝利（东北师范大学化学系，长春１３００２４）张建国（中国科学院长春应用化学研究所，长春１３００２２）关键词：Ｄａｗｓｏｎ结构杂多配合物，钨铌磷杂多配合物，~（１８３）Ｗ...     

负载型过氧磷钨杂多化合物上正己醇催化氧化成正己酸

由正己醇合成正己酸不仅可以提高附加值,还能生产己酸类香料以及多种医药产品．利用杂多过氧磷钨季铵盐催化剂,以对环境友好的H2O2 为氧化剂催化十八醇氧化成十八酸的研究已有报道［1,2],但合成负载型相转移催化剂并用于本课题的研究还未见报道．由于过氧磷钨十八烷基季铰盐催化剂（POWP）通常只有很小的比表面积,而SiO2不仅有大的比表面积,同时它所具有的表面羟基是杂多化合物的良好载体［2],POWP负载后的催化剂（POWPS）与未负载的POWP相比,将正己醇氧化为正已酸的收率提高了10多个百分点．     

过氧铌杂多钨酸盐热分解动力学参数的测定

钼和钨的杂多配合物由于其高催化活性及抗病毒性吸引着人们的关注［１］。杂多配合物的组成改变能调变其酸性、氧化性、反应性等,因此,混配型杂多配合物的研究近二十年来十分活跃。铌取代的杂多配合物在催化方面具有很独特的性质,其催化的工业应用及其机理已引起广泛的兴趣［２］。我们发现,过氧铌杂多配合物比非过氧杂多配合物具有更高的催化活性［３］。杂多酸盐的热稳定性是影响多相催化活性的重要性质,迄今有关过氧杂多配合物的热性质和热分解反应动力学参数的研究未见报道。本文用ＴＧ、ＤＴＡ、ＤＳＣ溶解度试验,变温红外和Ｘ一…     

磷钨钼钒杂多蓝光度法测定钨的探索

磷钨钼钒四元杂多蓝已用于高速钢中钼的测定。在该文的基础上,本文对磷钨钼钒杂多蓝光度测定钨的具体条件进行了研究,提出了高速钢中钨的光度分析新方法。试验表明,这一光度法可用于高速钢中≥1％钨的测定,其中常见共存元素均不干扰,方法准确、稳定、简便而快速。 1 试验部分 1.1 试剂与仪器 钨标准液:用钨酸钠配成0.03mol·L~(-1)溶液,经标定测得浓度为5.90mg·L~(-1)的标准液。 钼酸铵溶液;53g·L~(-1) 抗坏血酸溶液(VC):50g·L~(-1) 氯化亚锡溶液(SC):氯化亚锡7g微热溶于浓盐酸10ml后冷却,以水稀释至100ml,摇匀。 氯化亚锡的氟化铵溶液(SF);氯化亚锡7g溶于氟化铵溶液(10％)数十毫升中,再以氟化铵溶液(10％)稀释至100ml,摇匀,贮于塑料瓶中。将此溶液以10％氟化铵溶液稀释五倍即得1.4％二氯化锡的氟     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.