Effect of the exchange of substituent position in an amide amphiphile on the monolayer characteristics

The monolayer characteristics of two very similar amphiphiles, N-tridecyl-beta-hydroxypropionic acid amide (C13H27-NH-CO-C2H4OH; THPA) and N-(beta-hydroxyethyl)tridecanoic acid amide (C13H27-CO-NH-C2H4OH; HETA), the chemical structure of which is only changed by exchanging the position of the two substituents at the acid amide group, are compared. These small changes in the chemical structure give rise to large differences in the phase behavior of the HETA and THPA monolayers, as concluded from the differences in the surface pressure-area (pi-A) isotherms. Since both amphiphiles have the same alkyl chain length, the shift of the fluid/condensed phase transition pressure pi(c) to higher temperatures from THPA to HETA indicates a stronger polar character of the THPA headgroup. Considerable differences between the HETA and THPA monolayers also exist in the domain morphology, although, in both cases, six arms usually grow from a round center. The fractal-shaped HETA domains grow by tip splitting under the formation of numerous doubloons so that branching is considerably limited. This suggests a certain fluidity of the HETA condensed phase. The main differences of the domains result from the higher crystallinity. The starlike THPA domains have dendritic character and can form curved dendrites, which are partially two-dimensional twins due to the formation of dislocations in the two-dimensional lattice structure. In the case of HETA monolayers, the grazing incidence X-ray diffraction studies reveal a hexagonal packing of the alkyl chains oriented perpendicularly to the surface in an LS phase. In the case of THPA monolayers, an oblique lattice is formed. However, at low temperatures, a second phase transition between two condensed phases occurs that is demonstrated by an abrupt transition between two different oblique lattice structures at the surface pressure where a cusp in the pi-A isotherms occurs at T < 10 degrees C.     

Equation of state for the phase coexistence region of insoluble monolayers under consideration of the entropy nonideality

The equation of state for the monolayer with a fluid (G, LE)/condensed (LC) phase transition derived earlier (Fainerman, V.B.; Vollhardt, D. J. Phys. Chem. B 1999, 103, 145) in the framework of a quasichemical approach is generalized. A term is added that takes into account the entropy nonideality of mixing of the monomers and clusters of amphiphilic molecules. The results calculated from the proposed equations agree well with the experimental Pi-A isotherms obtained for various types of amphiphilic monolayers. The values of molecular areas of the amphiphilic molecules estimated from the fitting of experimental data to the proposed equation are quite similar to the real values. Another equation of state capable of describing the fluid state of insoluble monolayers and based on equations for the chemical potential of the solvent in the bulk phase and in the surface layer (Fainerman, V. B.; Vollhardt, D. J. Phys. Chem. B 2006, 110, 10436) is also generalized to be extended to the fluid/condensed phase transition region (A < A(c)), taking into account entropy nonideality for mixing solvent molecules, monomers, and clusters of amphiphilic molecules. The values calculated on this basis agree also well with the experimental data.     

Weak first-order tilting transition in monolayers of mono- and bipolar docosanol derivatives

A systematic analysis of pressure-area isotherms and grazing incidence X-ray diffraction (GIXD) data of 22-methoxydocosan-1-ol (H3C-O-(CH2)22-OH, MDO), docosan-1-ol (H3C-(CH2)21-OH, DO), and docosyl methyl ether (H3C-(CH2)21-O-CH3, DME) monolayers on pure water between 10 and 35 degrees C is presented. All monolayers form fully condensed phases in the investigated temperature region. The GIXD data reveal that the monolayers exhibit the phase sequence -S at lower temperature and -LS at higher temperature. Phase diagrams have been established. Inserting a second hydrophilic group at the opposite end of the molecule (bipolar MDO) shifts the S/LS boundary to higher temperatures. All monolayers exhibit herringbone (HB) packing at lower temperatures. The "kink" in the isotherms observed at lower temperatures is replaced by a very small plateau region at higher temperatures. The entropy changes connected with this weak first-order tilting transition are much smaller compared with the first-order transition from liquid-expanded (LE) to condensed (LC). Additionally, this transition is endothermic in contrast to the LE/LC transition. The reason for the endothermic transition is the weaker positional correlation in the nontilted state compared with the tilted one. The appearance of the weak first-order endothermic transition can be connected with the changed phase sequence. X-ray photoelectron spectroscopy (XPS) measurements provide information about the polar group orientation. Considerations based on GIXD and XPS data as well as adhesion energy of the different terminal end groups lead to the conclusion that the hydroxyl group of the bipolar MDO is attached to the water surface while the methoxy group is in contact with air. The presented results show that the second hydrophilic group influences the monolayer properties in a mild way.     

Progress in characterization of Langmuir monolayers by consideration of compressibility

Over decades, information about the rheological properties of the condensed monolayer phases has been obtained by introduction of a two-dimensional compressibility which is defined on the basis of the surface pressure-molecular area (Pi-A) features of the monolayer. Since the last decade, fundamental progress was attained in the experimental determination of the main characteristics of Langmuir monolayers in microscopic and molecular scale. Already smallest changes in the molecular structure of the amphiphile can result in changes in the molecular arrangement in the monolayer and thus, in changes of the main characteristics of the monolayer such as, the surface pressure-area per molecule (Pi-A) isotherms, the shape and texture of the condensed phase domains and the two-dimensional lattice structure. As the classical equations of state allowed only characterisation of the fluid (gaseous, liquid-expanded) state, thermodynamically based equations of state, which consider also the aggregation of the monolayer material to the condensed phase, have been developed. The present review focuses particularly to amphiphilic monolayers, the Pi-A isotherms of which indicate the existence of two condensed phases. For this case, the experimental results of the differences in the structure features and phase properties are discussed. The generalisation of the equation of state for Langmuir monolayers developed for the case that one, two or more phase transitions in the monolayer take place, is in agreement with the experimental results that the two-dimensional compressibility of the condensed phases undergoes a jump at the phase transition, whereas the compressibility is proportional to the surface pressure within one of the condensed phases. An example is presented which explains the procedure of the theoretical analysis of Pi-A isotherms indicating the existence of two condensed phases. An element of the procedure is the application of the general principle that the behaviour of any thermodynamic system is determined by the stability condition. An interesting anisotropy of the compressibility is revealed by GIXD studies of the S-phase of octadecanol monolayers. However, similar studies performed close to the LS-S-phase transition would result in a thermodynamically impossible negative compressibility. Close to this phase transition, the compressibility cannot be determined from the positions of the maxima because the monolayer is in a disordered state attributed to elastic distortions by fluctuations with the structure of the new phase in the surrounding matrix without destroying the quasi-long-range positional order.     

Effect of temperature on the surface phase behavior and micelle formation of a mixed system of nonionic/anionic surfactants

The adsorption and micellar behavior of diethylene glycol mono-n-tetradecyl ether (C14E2), sodium 3,6,9,12-tetraoxaoctacosanoate (TOOCNa), and their mixture at a 1:1 molar ratio have been studied by film balance, Brewster angle microscopy (BAM), and surface tensiometry at different temperatures. The monolayers of pure C14E2 and its mixture with TOOCNa show a first-order phase transition with a conspicuous cusp point in their respective adsorption isotherms. This is further confirmed by the observation of bright two-dimensional condensed phase domains visualized by BAM just after the appearance of the phase transition. It is interesting to note here that for C14E2, condensed domains are observed up to 19 degrees C, while in the mixed system, they are observed up to 22 degrees C. To understand why in the mixed system the domains are observed at higher temperatures than for pure C14E2, we have measured the temperature dependency of the equilibrium surface tension at > or = cmc (gammacmc) values of both the pure and the mixed systems. The gammacmc values of pure C14E2 remain almost constant, while those of pure TOOCNa and its mixture with C14E2 decrease appreciably with increasing temperature. It is concluded that higher degree of dehydration of the ethylene oxide (EO) chain reduces the head-group size of TOOCNa, which outweighs the combined effect of the repulsive interactions between the head-groups and the thermal motion of the adsorbed molecules. Furthermore, C14E2 being inserted into the TOOCNa monolayer reduces the electrostatic repulsions between the charged heads, and consequently, the adsorbed monolayers attain closer molecular packing. As a result, the gammacmc values of both pure TOOCNa and its mixture with C14E2 decrease with increasing temperature. This facilitates the formation of condensed domains in the mixed system at higher temperatures, whereas none of the individual members can show any indicative feature of phase transition under the same experimental conditions.     

Effect of hydroxyl group position and system parameters on the features of hydroxystearic Acid monolayers

The characteristic features of hydroxystearic acid monolayers OH-substituted in the mid position of the alkyl chain deviate considerably from those of the usual nonsubstituted stearic acid. The phase behavior, domain morphology, and two-dimensional lattice structure of 9-, 11-, and 12-hydroxystearic acids are studied, using pi-A isotherms, Brewster angle microscopy (BAM), and grazing incidence X-ray diffraction (GIXD), to obtain detailed information on the effect of the exact position of the OH-substitution. The pi-A isotherms of all three hydroxyoctadecanoic acids have an extended flat plateau region, the extension of which only slightly decreases with the increase of temperature. At the same temperature, the extension of the plateau region increases and the plateau pressure decreases from 9-hydroxyoctadecanoic acid to 12-hydroxyoctadecanoic acid. The absolute -DeltaH and -DeltaS values for the phase transition increase slightly from 9-hydroxyoctadecanoic acid to 12- hydroxyoctadecanoic acid and indicate differences in the ordering of the condensed phase under consideration of the special reorientation mechanism of these bipolar amphiphiles at the fluid/condensed phase transition. The morphology of the condensed phase domains formed in the fluid/condensed coexistence region is specific for the position of the OH-substitution of the alkyl chain, just as the lattice structures of the condensed monolayer phase. 11-hydroxyoctadecanoic acid monolayers form centered rectangular lattices with the chain tilt toward the NNN (next nearest neighbor) direction, and 12-hydroxyoctadecanoic acid monolayers have an oblique lattice over the entire pressure range. A special feature of 9-hydroxystearic acid monolayers is the phase transition between two condensed phases observed in the pi-A isotherm of 5 degrees C at approximately 18 mN/m, where the centered rectangular lattice shows a NNN/NN transition. The morphology of the condensed phase domains formed in the fluid/condensed coexistence region, just as the lattice structures of the condensed monolayer phase, reveal the high specifity of the monolayer feature of the bipolar hydroxystearic acids OH-substituted in the mid position.     

Faceted structures in Langmuir monolayers of diethylene glycol mono-n-octadecyl ether at the air--water interface

We have concurrently studied the surface pressure (pi) versus area (A) isotherms and microscopic surface morphological features of Langmuir monolayers of diethylene glycol mono-n-octadecyl ether (C18E2) by film balance and Brewster angle microscopy (BAM) over a wide range of temperature. At temperatures < or =10 degrees C, the monolayers exist in the form of condensed phase even just after the evaporation of the spreading solvent, suggesting that the melting point of the condensed phase is above this temperature. At > or =15 degrees C, the monolayers can exist as gas (G), liquid expanded (LE), and liquid condensed (LC) phases and undergo a pressure-induced first-order phase transition between LE and LC phases showing a sharp cusp point followed by a plateau region in the pi-A isotherms. A variety of 2-D structures, depending on the subphase temperature, are observed by BAM just after the appearance of the cusp point. It is interesting to note here that the domains attain increasingly large and compact shape as the subphase temperature increases and finally give faceted structures with sharp edges and corners at > or =30 degrees C. The BAM observations were coupled with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) to gain better understanding regarding the conformational order and subcell packing of the molecules. The constancy of the methylene stretching modes over the studied temperature range suggests that the hydrocarbon chains do not undergo any conformational changes upon compression of the monolayer. However, the full width at half-maximum (fwhm) values of the asymmetric methylene stretching mode (nu(as)(CH(2))) are found to respond differently with changes in temperature. It is concluded that even though the trans/gauche ratio of the hydrocarbon chains remains virtually constant, the LE-LC phase transition upon compression of the monolayer is accompanied by a loss of the rotational freedom of the molecules.     

Thermodynamic and structural characterization of amphiphilic melamine-type monolayers

Monolayers of amphiphilic melamine derivatives are good candidates for the formation of supramolecular structures by hydrogen-bonding of nonsurface active species dissolved in the aqueous subphase by molecular recognition. In the present work, the thermodynamic and structural properties of the Langmuir monolayers of a homologous series of a selected amphiphilic melamine-type are characterized. Good candidates for such studies are the decyl, undecyl, and dodecyl homologues of the 2,4-di(n-alkylamino)-6-amino-1,3,5-triazine (2CnH(2n+1)-melamine) monolayers because of their two-phase coexistence region in the accessible temperature range. The characterization of the structural and phase behavior is performed by a combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and Grazing incidence X-ray diffraction (GIXD) measurements. A comprehensive thermodynamic analysis provides good agreement between the experimental surface pressure - area (Pi-A) isotherms and the theoretical curves that were calculated on the basis of equations of state for a large region of monolayer stages developed by us in J. Phys. Chem. 1999, 103, 145. Theoretical curves calculated by application of equations of state only for the fluid monolayer state proposed recently by Rusanov (J. Chem Phys. 2004, 120, 10736) are in good agreement with the experiments in a limited temperature range. A rigorous equation is derived and applied to the experimental results for the calculation of the enthalpy of two-dimensional phase transition. The combination of BAM and GIXD illustrates that the microscopic long range ordering of the condensed monolayer phases is related to the lattice structure of the condensed monolayer.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Kinetic appearance of first-order gas-liquid expanded and liquid expanded-liquid condensed phase transitions below the triple point

Phase diagram of Gibbs monolayers of mixtures containing n-hexadecyl phosphate (n-HDP) and L-arginine (L-arg) at a molar ratio of 1:2 has been constructed by measuring surface-pressure-time (pi-t) isotherms with film balance and by observing monolayer morphology with Brewster angle microscopy (BAM). This phase diagram shows a triple point for gas (G), liquid expanded (LE), and liquid condensed (LC) phases at around 6.7 degrees C. Above this triple point, a first-order G-LE phase transition occurring at 0 surface pressure is followed by another first-order LE-LC phase transition taking place at a certain higher surface pressure that depends upon temperature. The BAM observation supports these results. Below the triple point, the pi-t measurements show only one first-order phase transition that should be G-LC. All of these findings are in agreement with the general phase diagram of the spread monolayers. However, the BAM observation at a temperature below the triple point shows that the thermodynamically allowed G-LC phase transition is, in fact, a combination of the G-LE and LE-LC phase transitions. The latter two-phase transitions are separated by time and not by the surface pressure, indicating that the G-LC phase transition is kinetically separated into these two-phase transitions. The position of the LE phase below the triple point in the phase diagram is along the phase boundary between the G and LC phases.     

Phase transition in Langmuir monolayers

The main features of several theoretical models which describe the main phase transition and correspondingly the non-horizontal shape of the Π-A isotherms of the Langmuir monolayers, are discussed. New equations of state are based on the generalised Volmer's equation and consider the coexistence monomers and large clusters as bimodal distribution. A further generalisation for the case of quasi-bimodal distribution allows the consideration of monomers with small aggregates on one side of the spectrum and large clusters on the other side. The new theoretical model is corroborated by the Π-A isotherms of various amphiphilic monolayers the condensed phases of which have various gradual differences in the crystalinity and packing density data. The large variety of shapes of the Π-A isotherms in the region A<A_c can be determined by a single general equation whose parameters, except A_c, correspond to the isotropic fluid-like monolayer region. The application of the generalised equation of state on the experimental Π-A isotherms indicates the formation of small aggregates in the region A>A_c.     

Interactions of L-arginine with Langmuir monolayers of di-n-dodecyl hydrogen phosphate at the air-water interface

The surface phase behavior of di-n-dodecyl hydrogen phosphate (DDP) in Langmuir monolayer and its interactions with L-arginine (L-arg) have been investigated by measuring pi-A isotherms with a film balance and observing monolayer morphology with a Brewster angle microscopy (BAM). The DDP monolayers on pure water show a first-order liquid expanded-liquid condensed (LE-LC) phase transition and form fingering LC domains having uniform brightness at different temperatures. At 15 degrees C, the pi-A isotherms on pure water and on different concentration solutions of L-arg show a limiting molecular area at approximately 0.50 nm(2)/molecule. With increasing the subphase concentration of L-arg up to 4.0 x 10(-4)M, the LE and the LE-LC coexistence regions shift to larger molecular areas and higher surface pressures, respectively. With a further increase in the concentration of L-arg beyond this critical concentration, these isotherms show little or no more expansion. These results have been explained by considering the fact that the L-arg undergoes complexation with the DDP to form L-arg-DDP that remains in equilibrium with the components at the air-water interface. As the concentration of L-arg in the subphase increases, the equilibrium shifts towards the complex. At a concentration of L-arg > or =4.0 x 10(-4)M, the DDP monolayers get saturated and show the characteristics of the new amphiphile, L-arg-DDP. BAM is applied to confirm the above results. When the concentration of the L-arg is <4.0 x 10(-4)M, domains always start forming at an area of approximately 0.64 nm(2)/molecule, which is the critical molecular area for the phase transition in the DDP monolayers on pure water. In contrast, when the monolayers are formed on a solution containing > or =4.0 x 10(-4)M L-arg, comparatively smaller size domains are formed after the appearance of a new cusp point at approximately 0.55 nm(2)/molecule. With an increase in the concentration of L-arg in the subphase, the size of the domains decreases indicating that the fraction of the DDP gradually decreases, whereas the fraction of the complex gradually increases. In addition, a very simple procedure for determination of the stability constant, which is 2.6 x 10(4)M(-1) at 15 degrees C, has been suggested.     

Monolayer properties of mixtures of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their corresponding copolymers

The monolayer properties of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their mixtures at various ratios of the two polymers have been studied from the measurements of their surface pressure–area isotherms at air–water interface. The monolayer properties of their mixtures have been compared with those of their corresponding copolymers. The results show that the isotherms of the mixed monolayers have two break points at higher pressures than that of poly(n-lauryl methacrylate). This suggests that the mixtures may form more stable films that consist of separate phases of the two homopolymers, although each phase may contain a small amount of the other. The isotherms of the copolymer monolayers indicate a phase transition from liquid condensed to solid film between 50 segment mole % and 70% poly(n-stearyl methacrylate). The monclayer of these copolymers has properties that differ from those of the corresponding mixtures of two pure homopolymers and is more compatible than the mixtures of pure homopolymers.     

Monolayer characteristics of a long-chain N,O-diacyl substituted ethanolamine at the air/water interface

The N- and/or O-acylation of amphiphilic ethanolamine attracts particular attention because of its interesting biological, pharmaceutical, and medicinal properties. Tetradecanoic acid-2-[(1-oxotetradecyl)amino]ethyl ester (TAOAE) as the selected N,O-diacyl derivative of ethanolamine has been synthesized in order to obtain first information about its main interfacial characteristics, such as the surface pressure-area (π-A) isotherms, the morphology of the condensed phase domains, the lattice structure of the condensed phase, and information about the existence of interfacial hydrogen bonds (-NH···O═C-). The π-A isotherms of TAOAE, similar to those of the most usual monolayers of amphiphiles, show a sharp break point (A(c)) indicating the first-order phase transition from the fluid (liquid-expanded (LE), gaseous (G)) to the condensed (liquid-condensed (LC)) phase. On the mesoscopic scale, the dendritic domains homogeneously reflecting suggest an orientation of the alkyl chains perpendicular to the aqueous surface. The grazing incidence X-ray diffraction (GIXD) studies reveal hexagonal packing of the TAOAE molecules oriented perpendicular to the surface in an LS phase. The existence of a hydrogen-bonding network in the monolayer is supported by infrared reflection absorption spectroscopy (IRRAS) experiments.     

Penetration of dissolved amphiphiles into two-dimensional aggregating lipid monolayers

The review demonstrates the recent theoretical and experimental progress in the understanding of penetration systems at the air-water interface in which a dissolved amphiphile (surfactant, protein) penetrates into a Langmuir monolayer. The critical review of the existing theoretical models which describe the thermodynamics of the penetration are critically reviewed. Although a rigorous thermodynamic analysis of penetration systems is unavailable due to their complexity, some model assumptions, e.g. the invariability of the activity coefficient of the insoluble component of the monolayer during the penetration of the soluble component results in reasonable solutions. New theoretical models describing the equilibrium behaviour of the insoluble monolayers which undergo the 2D aggregation in the monolayer, and the equations of state and adsorption isotherms which assume the existence of multiple states (conformations) of a protein molecule within the monolayer and the non-ideality of the adsorbed monolayers are now available. The theories which describe the penetration of a soluble surfactant into the main phases of Langmuir monolayers were presented first for the case of the mixture of the molecules possessing equal partial molar surfaces (the mixture of homologues), with further extension of the models to include the interesting process of the protein penetration into the monolayer of 2D aggregating phospholipid. This extension was based on a concept which subdivides the protein molecules into independent fragments with areas equal to those of the phospholipid molecule. Various mechanisms for the effect of the soluble surfactant on the aggregation of the insoluble component were considered in the theoretical models: (i) no effect on the aggregate formation process; (ii) formation of mixed aggregates; and (iii) the influence on the aggregating process via the change of aggregation constant, but without any formation of mixed aggregates. Accordingly depending on the mechanism, different forms of the equations of state of the monolayer and of the adsorption isotherms of soluble surfactant are predicted. Based on the shape of the experimental pi-A isotherms, interesting conclusions can be drawn on the real mechanism. First experimental evidence has been provided that the penetration of different proteins and surfactants into a DPPC monolayer in a fluid-like state induces a first order main phase transition of pure DPPC. The phase transition is indicated by a break point in the pi(t) penetration kinetics curves and the domain formation by BAM. Mixed aggregates of protein with phospholipid are not formed. These results agree satisfactorily with the predictions of the theoretical models. New information on phase transition and phase properties of Langmuir monolayers penetrated by soluble amphiphiles are obtained by coupling of the pi(t) penetration kinetics curves with BAM and GIXD measurements. The GIXD results on the penetration of beta-lactoglobulin into DPPC monolayers have shown that protein penetration occurs without any specific interactions with the DPPC molecules and the condensed phase consists only of DPPC.     

Intermolecular forces in spread phospholipid monolayers at oil/water interfaces

The lateral intermolecular forces between phospholipids are of particular relevance to the behavior of biomembranes, and have been approached via studies of monolayer isotherms at aqueous interfaces, mostly restricted to air/water (A/W) systems. For thermodynamic properties, the oil/water (O/W) interface has major advantages but is experimentally more difficult and less studied. A comprehensive reanalysis of the available thermodynamic data on spread monolayers of phosphatidyl cholines (PC) and phosphatidyl ethanolamines (PE) at O/W interfaces is conducted to identify the secure key features that will underpin further development of molecular models. Relevant recourse is made to isotherms of single-chain molecules and of mixed monolayers to identify the contributions of chain-chain interactions and interionic forces. The emphasis is on the properties of the phase transitions for a range of oil phases. Apparent published discrepancies in thermodynamic properties are resolved and substantial agreement emerges on the main features of these phospholipid monolayer systems. In compression to low areas, the forces between the zwitterions of like phospholipids are repulsive. The molecular model for phospholipid headgroup interactions developed by Stigter et al. accounts well for the virial coefficients in expanded phospholipid O/W monolayers. Inclusion of the changes in configuration and orientation of the zwitterion headgroups on compression, which are indicated by the surface potentials in the phase transition region, and inclusion of the energy of chain demixing from the oil phase will be required for molecular modeling of the phase transitions.     

Adsorption and micellar properties of a mixed system of nonionic-nonionic surfactants

We study the surface adsorption and bulk micellization of a mixed system of two nonionic surfactants, namely, ethylene glycol mono-n-dodecyl ether (C12E1) and tetraethylene glycol mono-n-tetradecyl ether (C14E4), at different mixing ratios at 15 degrees C. The pure C14E4 monolayer cannot show any indicative features of phase transition because of both hydration-induced and dipolar repulsive interactions between the bulky head groups. On the other hand, the monolayers of pure C12E1 and its mixture with C14E4 undergo a first-order phase transition, showing a variety of surface patterns in the coexistence region between the liquid expanded (LE) and liquid condensed (LC) phases under the same experimental conditions. For pure C12E1, the domains are of a fingering pattern while those for the C12E1/C14E4 mixed system are found to be compact circular and small irregular structures at 2:1 and 1:1 molar ratios, respectively. The critical micelle concentration (cmc) values of both the pure and the mixed systems were measured to understand the micellar behavior of the surfactants in the mixture. The cmc values of the mixed system were also calculated assuming ideal behavior of the surfactants in the mixture. The experimental and calculated values are found to be very close to each other, suggesting an almost ideal nature of mixing. The interaction parameters for mixed monolayer and micelle formation were calculated to understand the mutual behavior of the surfactants in the mixture. It is observed that the interaction parameters for mixed monolayer formation are more negative than those of micelle formation, indicating a stronger interaction between the surfactants during monolayer formation. It is concluded that since both the surfactants bear EO units in their head groups, structural parity and hydrogen bonding between the surfactants allow them to be closely packed during monolayer and micelle formation.     

Influence of temperature and alkyl chain length on phase behavior in Langmuir monolayers of some oxyethylenated nonionic surfactants

We study the surface phase behavior in Langmuir monolayers of a series of nonionic surfactants of the general formula CnE1 with n=14, 16, and 18 by film balance and Brewster angle microscopy (BAM) over a wide range of temperatures. A cusp point followed by a pronounced plateau region in the pressure-area (pi-A) isotherms indicates a first-order phase transition in the coexisting state between a lower density liquid expanded (LE) phase and a higher density liquid condensed (LC) phase at the air-water interface. The formation of bright two-dimensional (2D) LC domains in a dark background visualized by BAM further confirms this observation. In addition to the cusp point at the onset of the LE-LC coexistence state, another cusp point followed by a small plateau is observed for the C14E1 and C18E1 monolayers, indicating a second phase transition between two condensed phases of different compressibility and tilt orientation of the molecules. This unusual two-step phase transition is explained by the Ostwald step rule. The C16E1 and C18E1 monolayers show a kink in their respective isotherms, after which the surface pressure increases steeply with only a little decrease in the molecular area, suggesting that the molecules undergo a transition from a tilted to an almost vertical orientation with respect to the water surface. The thermodynamic parameters for the condensation of the molecules in the LE-LC coexistence state were calculated by employing the 2D Clapeyron equation. The temperature coefficient of the critical surface pressure dpi(c)/dT values shows a decreasing trend from C14E1 to C18E1, suggesting that the condensation process becomes less and less prone to thermal perturbation as the chain length increases. For all the amphiphiles, the DeltaH values are found to be negative, suggesting an exothermic nature of condensation. The negative DeltaS values obtained from the relation DeltaH/T probably come from the restriction on the rotational and translational motion of the molecules constrained in a confined area in the LE-LC transition region.     

Monolayers of mono- and bipolar palmitic acid derivatives

Monopolar and bipolar derivatives of hexadecanoic acid (HA), 16-hydroxyhexadecanoic acid (HHA), methyl hexadecanoate (MH) and methyl 16-hydroxyhexadecanoate (MHH) have been investigated on pure water and NaCl solutions with different ion concentrations (1, 2 and 3 mol l⁻¹). Surface pressure area isotherms show that HA forms a fully condensed monolayer on pure water at 20 °C [E. Teer, C.M. Knobler, S. Siegel, D. Vollhardt, G. Brezesinski, J. Phys. Chem., B104, 43, 2000, pp. 10053–10058] whereas in the case of the corresponding bipolar HHA the hydroxy group as a second polar moiety leads to a destabilization of the monolayer. The presence of two relatively strong hydrophilic polar groups at opposite ends of the chain prevents the formation of condensed films. The esterification of the carboxyl group (MH) changes the phase sequence from L₂–Ov–LS for HA to L₂–LS. Inserting a hydroxy group at the end of the chain (MHH) shifts the liquid expanded/liquid condensed (LE/LC) phase transition to higher surface pressures but does not change the phase sequence, however it increases the chain tilt. The pressure of the first-order phase transition LE/LC is strongly temperature dependent for MH, while the transition pressure of MHH is almost temperature independent. The phase behavior of MHH and MH on pure water was further studied by surface potential, Brewster angle microscopy (BAM), fluorescence microscopy and grazing incidence X-ray diffraction (GIXD) measurements. The LC domains of MHH on pure water are so small that no inner texture can be observed by BAM in contrast to the LC domains of MH. 3M NaCl in the subphase does not change the MH textures, while it increases the size of the LC domains of MHH. The influence of the hydroxy group on the monolayer behavior is discussed in terms of the formation of hydrogen bonds. The presence of NaCl in the subphase expands the monolayers. The results obtained are explained by changes in monolayer–monolayer and monolayer–subphase interactions.