Highly transparent superhydrophobic surfaces from the coassembly of nanoparticles (≤100 nm)

We report a simple and versatile approach to creating a highly transparent superhydrophobic surface with dual-scale roughness on the nanoscale. 3-Aminopropyltrimethoxysilane (APTS)-functionalized silica nanoparticles of two different sizes (100 and 20 nm) were sequentially dip coated onto different substrates, followed by thermal annealing. After hydrophobilization of the nanoparticle film with (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trichlorosilane for 30 min or longer, the surface became superhydrophobic with an advancing water contact angle of greater than 160° and a water droplet (10 μL) roll-off angle of less than 5°. The order of nanoparticles dip coated onto the silicon wafer (i.e., 100 nm first and 20 nm second or vice versa) did not seem to have a significant effect on the resulting apparent water contact angle. In contrast, when the substrate was dip coated with monoscale nanoparticles (20, 50, and 100 nm), a highly hydrophobic surface (with an advancing water contact angle of up to 143°) was obtained, and the degree of hydrophobicity was found to be dependent on the particle size and concentration of the dip-coating solution. UV-vis spectra showed nearly 100% transmission in the visible region from the glass coated with dual-scale nanoparticles, similar to the bare one. The coating strategy was versatile, and superhydrophobicity was obtained on various substrates, including Si, glass, epoxy resin, and fabrics. Thermal annealing enhanced the stability of the nanoparticle coating, and superhydrophobicity was maintained against prolonged exposure to UV light under ambient conditions.     

Effect of microstructure and surface roughness on the wettability of superhydrophobic sol–gel nanocomposite coatings

Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobically modified silica (HMS) nanoparticles dispersed in sol–gel matrices prepared with acid-catalyzed tetraethoxysilane (TEOS), and methyltriethoxysilane (MTEOS). The hydrophobicity of the coatings increased with increase in the concentration of HMS nanoparticles. Superhydrophobic coatings with water contact angle (WCA) of 166° and roll-off angle <2° were obtained by optimizing the sol–gel processing parameters and the concentration of silica nanoparticles in the coating. FESEM studies have shown that surface has a micro-nano binary structure composed of microscale bumps and craters with protrusions of nanospheres. The properties of composite coatings fabricated by spin coating and spray coating methods were compared. It was found that the microstructure and the wettability were also dependent on the method of application of the coating.     

Superhydrophilic–superhydrophobic micropattern on TiO2 nanotube films by photocatalytic lithography

The present paper describes an unconventional approach to fabricate the superhydrophilic–superhydrophobic micropatterns on the TiO₂ nanotube structured film by photocatalytic lithography with a two-step process. At the first step, the superhydrophobic TiO₂ nanotube film is fabricated through electrochemical and self-assembled techniques. And at the second step, the superhydrophobic film is selectively exposed to UV light through a photomask to locally photocatalyse the organic monolayer assembled on the TiO₂ nanotube surface. The superhydrophilic–superhydrophobic micropatterns have thus been developed, as a novel template to fabricate a define micropatterned coating of nano octacalcium phosphate by electrochemical deposition. It is indicated that these combined processes reveal a very promising approach for constructing well-defined micropatterns of various functional materials.     

Preparation of superhydrophobic silica nanoparticles by microwave assisted sol–gel process

Hydrophobic silica nanoparticles were obtained by microwave assisted sol–gel method using a two-step procedure. In the first step different size silica particles were generated from tetraethyl orthosilicate and in the second one the silica particles were hydrophobized using hexadecyl trimethoxysilane (HDTMOS). Under microwave irradiation, high conversion degrees were obtained at relatively short reaction times. The HDTMOS added in the second step instead of coating the silica nanoparticles generated new ones and therefore the final product showed a bimodal size distribution. All the synthesized nanoparticles gave rise to high water contact angles (≈150°) and low hysteresis values.     

Thermally stable and transparent superhydrophobic sol–gel coatings by spray method

A facile method was developed for the fabrication of the methyltriethoxysilane based transparent and superhydrophobic coating on glass substrates. The transparent and hydrophobic coatings were deposited on the glass substrates, using spray deposition method followed by surface modification process. A spray deposition method generates hierarchical morphology and post surface modification with monofunctional trimethylchlorosilane decreases the surface free energy of coating. These combined effects of synthesis produces bio-inspired superhydrophobic surface. The deposited coating surface shows high optical transparency, micro-nano scale hierarchical structures, improved hydrophobic thermal stability, static water contact angle of about 167° ± 1°, low sliding angle about 2° ± 1° and stable superhydrophobic nature. This paper provides the very simple sol–gel approach to the fabrication of optically transparent, thermally stable superhydrophobic coating on glass substrates. This fabrication strategy may easily extend to the industrial scale up and high-technology fields.     

Stabilized superhydrophobic composite membranes prepared by electrospinning for oil–water separation

In dealing with the oil–water separation process, improving the oil–water selectivity of the membrane surface and increasing the porosity within the membrane are effective means to achieve durable and efficient oil–water separation. Therefore, polystyrene/polyacrylonitrile-polyvinylidene fluoride/Polydimethylsiloxane Fe₃O₄ nanoparticles (PS/PAN-PVDF/PDMS@Fe₃O₄) composite membranes with superhydrophobicity and lipophilicity were prepared by electrospinning technique. By controlling the filling concentration of Fe₃O₄ nanoparticles, a stable superhydrophobic and lipophilic rough structure was constructed, and micro–nano multilayer rough voids existed inside the membrane. The results showed that the composite fiber membrane exhibited exceptional superhydrophobicity (156.2°), thermal stability (338°C), mechanical properties (tensile strength of 3.0 MPa, elongation of 33.9%), and oil adsorption capacity (30–100 g/g). Moreover, even under corrosive environments, this composite fiber membrane maintained its superhydrophobic properties (above 152°) and achieved high oil–water separation efficiency (above 97%). Remarkably, after 40 cycles, the composite membrane could sustain a separation flux of 5000 L m⁻² h⁻¹. Consequently, the composite fiber membrane manufactured using this strategy exhibits promising potential for applications in oil–water separation.     

One-pot sonochemical synthesis of superhydrophobic organic–inorganic hybrid coatings on cotton cellulose

Inspired by the surface structure of lotus leaves, different types of superhydrophobic cellulosic materials with contact angle (CA) of higher than 150° are currently provided. However, fabrication of these surfaces in a facile one-step coating process is one of the challenging issues. This paper describes a facile method to sonochemically synthesize superhydrophobic organic–inorganic hybrid coatings on cotton fabric by an alkaline-catalyzed co-hydrolysis and co-condensation of tetraethylorthosilicate and alkyltrialkoxysilanes. The influence of alkyl chain length (methyl, octyl, hexadecyl) of silane and reaction time was investigated. Surface structure of the fabrics was investigated by SEM, EDS, FTIR spectroscopies, and reflectance spectrophotometry. Wettability properties were studied by measuring water CA, shedding angle (SHA) and resistance to wetting by a series of ethanol–water mixtures of different surface tensions. The results showed that the treated fabrics were coated with a homogeneous thin nano-scaled coating of hybrid silica nano-particles. The fabrics demonstrated CA of higher than 150°, SHA in the range of 6–24° and different stickiness to water droplets. The fabrics treated by silanes with longer alkyl chain length and at higher reaction time revealed better water repellency. The coatings were nearly transparent, could not affect the color of the fabrics and had high stability against repeated washing. In addition, mechanical properties of the fabrics were not substantially affected.     

Sub-5 nm porous polymer decoration toward superhydrophobic MOFs with enhanced stability and processability

Metal-organic frameworks(MOFs) show great potential for various applications, but many of them suffer from the drawbacks of hydrolysis propensity and poor processability. Herein, we employ polymers of intrinsic microporosity(PIMs) with hydrophobic pores to decorate MOFs toward substantially improved water stability and shapeability. Through simple PIM-1 decoration, the sub-5 nm polymer layers can be uniformly deposited on MOF surfaces with almost no deterioration in porosity. Owing to the existe...     

Multifunctional superhydrophobic/oleophobic and flame-retardant cellulose fibres with improved ice-releasing properties and passive antibacterial activity prepared via the sol–gel method

In this research, a two-component sol–gel inorganic–organic hybrid coating was prepared on a cotton fibre surface. An equimolar sol mixture of the precursors 1H,1H,2H,2H-perfluorooctyltriethoxysilane (SiF) and P,P-diphenyl-N-(3-(trimethoxysilyl)propyl) phosphinic amide (SiP) was applied to cotton fabric samples using the pad-dry-cure method. The surfaces of the untreated and coated cotton fibres were characterised using scanning electron microscopy, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight-secondary ion mass spectrometry. The functional properties of the coated cotton fabric samples were investigated using static contact angle measurements with water and n-hexadecane, the ice-releasing test, antibacterial testing against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, thermogravimetric analysis in an air atmosphere, and vertical flammability tests. The results reveal the formation of a nanocomposite two-component inorganic–organic hybrid polymer network that is homogenously distributed over the cotton fibre surface. The presence of the SiP component in the two-component inorganic–organic hybrid coating did not hinder the functional properties imparted by the presence of the SiF component and vice versa, illustrating their compatibility. The cooperative action of the SiF and SiP components in the two-component coating provided the cotton fabric with exceptional multifunctionality, including simultaneous superhydrophobicity and high oleophobicity, passive antibacterial activity, and improved thermo-oxidative stability.     

Preparation of durable superhydrophobic surface by sol–gel method with water glass and citric acid

Durable superhydrophobic surface on cotton fabrics has been successfully prepared by sol–gel method. Cellulose fabric was first coated with silica sol prepared with water glass and citric acid as the acidic catalyst. The silica coated fabric was then padded with hydrolyzed hexadecyltrimethoxysilane afterwards obtaining low surface energy. Water contact angle and hydrostatic pressure were used to characterize superhydrophobicity and washing durability. Scanning electron microscopy was used to characterize the surface morphology changes after certain washing times. All results showed good durable hydrophobicity on cellulose fabrics. In addition, the influence of citric acid and sodium hypophosphite (NaH₂PO₂) on the durability of hydrophobicity was also investigated. The durability of treated cotton improved with the increase of concentration of citric acid in the presence of NaH₂PO₂. It could be concluded that citric acid acted as multi-functional heterogeneous grafting chemicals to improve washing durability of hydrophobicity by forming the ester bonds between cotton fabric and silica sol and improved the durability of hydrophobicity.     

Preparation of superhydrophobic materials for oil/water separation and oil absorption using PMHS–TEOS-derived xerogel and polystyrene

Fabrication of suerhydrophobic materials towards oil/water separation and oil absorption has been receiving great attention nowadays, due to the significant increase of industrial oily wastewater and frequent accident of oil spill. In most previous studies, the usage of expensive precursors restricted the wide applications of prepared superhydrophobic materials. In this work, superhydrophobic filter paper, fabric and polyester sponges were fabricated by dip-coating the mixed solution of polystyrene and xerogels, which were prepared with tetraethoxysilane and polymethylhydrosiloxane, based on previous work. The as-fabricated fabric can effectively separate oil and water mixtures and possesses excellent reusability; more significantly, the materials maintained its good hydrophobic and excellent oil/water separation capacity even after ten cycles. Interestingly enough, the stability was provided, as a result, the fabric still exhibited superhydrophobic after 100 abrasion times and showed high repellency towards many liquids with different pH values. Additionally, the coated polyester sponges can quickly absorb various oil and organic liquid, which will offer a practical application for the treatment of seawater or oily wastewater. By contrast, this experiment process is simple and avoided using costly fluoro-chemicals or complicated fabrication process.     

Formation of AlOOH and silica composite hierarchical nanostructures thin film by sol–gel dip-coating for superhydrophobic surface with high adhesion force

Nanosheet AlOOH and silica spheres composite thin film was deposited onto glass by sol–gel dip-coating method through hydrolysis of boiling water immersion. A silica sol and an alumina sol are employed in dipping process for the preparation of hierarchical nanostructures thin film. The morphology and structure of the films were characterized using field emission scanning electron microscopy and X-ray diffraction. The super-hydrophobicity with high adhesion forces can be attributed to both the rough multi-scale structural coating and surface enrichment of low surface energy with the chemical vapor deposition of 1H,1H,2H,2H-perfluorodecyltriethoxysilane.     

Preparation and properties of fluoroalkyl end-capped vinyltrimethoxysilane oligomeric nanoparticles—A new approach to facile creation of a completely superhydrophobic coating surface with these nanoparticles

Novel fluoroalkyl end-capped vinyltrimethoxysilane oligomeric nanoparticles were prepared by the hydrolysis of the corresponding oligomer under alkaline conditions. The size of fluorinated nanoparticles thus obtained is of submicrometer levels and is not sensitive to the refractive indices of a variety of solvents; however, the turbidity of the dispersed fluorinated nanoparticles is extremely sensitive to the refractive indices of these solvents. In particular, the solvents of which the refractive indices are from 1.378 to 1.408 were found to afford the transparent colorless dispersed particle solutions. More interestingly, the modified glass surface treated with fluorinated nanoparticles exhibited a completely superhydrophobic characteristic (a water contact angle: 180°) with a nonwetting property against water droplets.     

Pointing the way to the products? Comparison of the stress tensor and the second-derivative tensor of the electron density

The eigenvectors of the electronic stress tensor can be used to identify where new bond paths form in a chemical reaction. In cases where the eigenvectors of the stress tensor are not available, the gradient-expansion-approximation suggests using the eigenvalues of the second derivative tensor of the electron density instead; this approximation can be made quantitatively accurate by scaling and shifting the second-derivative tensor, but it has a weaker physical basis and less predictive power for chemical reactivity than the stress tensor. These tools provide an extension of the quantum theory of atoms and molecules from the characterization of molecular electronic structure to the prediction of chemical reactivity.     

Is the ion-linear quadrupole capture rate constant anisotropic with respect to the sign of the product of the charge on the ion and the quadrupole moment of the molecule?

The sign of the charge-quadrupole moment product is shown to affect the rate of ion-linear quadrupole capture.

---

- .

     

Is the dynamical polarization a significant part of the contribution of the triples to the correlation energy?

One may call dynamical polarization of doubly excited configurations the energy lowering of these configurations under the response of the other electrons to the so-created fluctuation of the electric field. This contribution of triply excited configurations may be identified and calculated through a computation that only requires a computation time proportional to the sixth power of the number of molecular orbitals (MOs), instead of the seventh power for the total contribution of the triples. Its amplitude depends on the choice of the MOs and becomes important when localized MOs are used.     

Does the Temperature of the prise de mousse Affect the Effervescence and the Foam of Sparkling Wines?

The persistence of effervescence and foam collar during a Champagne or sparkling wine tasting constitute one, among others, specific consumer preference for these products. Many different factors related to the product or to the tasting conditions might influence their behavior in the glass. However, the underlying factor behind the fizziness of these wines involves a second in-bottle alcoholic fermentation, also well known as the prise de mousse. The aim of this study was to assess whether a low temperature (13 °C) or a high temperature (20 °C) during the in-bottle fermentation might have an impact on the effervescence and the foaming properties (i.e., collar height and bubble size) of three French sparkling wines (a Crémant de Loire and two Champagne wines), under standard tasting conditions. Our results showed that sparkling wines elaborated at 13 °C and served in standard tasting conditions (i.e., 100 mL, 18 °C) had better ability to keep the dissolved CO₂ (between 0.09 and 0.30 g/L) in the liquid phase than those elaborated at 20 °C (with P < 0.05). Most interestingly, we also observed, for the Crémant de Loire and for one Champagne wine, that the lower the temperature of the prise de mousse, the smaller (with P < 0.05) the bubbles in the foam collar throughout the wine tasting.     

Correlation Analysis of the Runoff of the Rivers and the Seisms in China

In recent hundred years the annual discharge variations of the Changjiang River (represented by the Yichang station) and the Huanghe River (represented by Shanxian and Tangnaihe, respectively) have closely related to the geographical distribution of the earthquakes coming about in China in the same year, Both the occurrence of the destructive seism or seismic swarm in the river basins and the disappearance of the shocks in the east and south of the basins are the conditions that the Changjiang and Huanghe Rivers are the high flow while that the strong earthquake of magnitude 7 or more occurred in North China is the condition for the Changjiang low flow year and that of 6 or more in the Qilian Mountains area is for the Huanghe River. In the latter part of this paper, a 2-year sample is given to explain that the conditions of the 2 rivers being high flow years are that the north-south seismic belt is active and in the meanwhile no seism occurred in South China, and those of the low flow year are that the     

Self-sorting: the exception or the rule?

In this paper, we pose the question of whether self-sorting in designed systems is exceptional behavior or whether it is likely to become a more general phenomenon governing molecular recognition and self-assembly. To address this question we prepared a mixture comprising two of Davis' self-assembled ionophores, Rebek's tennis ball and calixarene tetraurea capsule, Meijer's ureidopyrimidinone, Reinhoudt's calixarene bis(rosette), and two molecular clips in CDCl(3) solution and observed the behavior of this ensemble by (1)H NMR. As hypothesized, high-fidelity self-sorting behavior was observed. The influence of several key variables-temperature, concentration, equilibrium constants, and the presence of competitors-on the fidelity of self-sorting is described. These results show that self-sorting is neither the exception nor the rule. They suggest, however, that the subset of known molecular aggregates that exceed the criteria required for thermodynamic self-sorting is larger than previously appreciated and potentially quite broad.