Thermochemistry of sesquiterpene lactone argolide

The enthalpies of dissolution of argolide (C₁₅H₂₀O₃) in 96% ethanol are determined by isothermal calorimetry at 298.15 K and different dilutions of 1: 18 000, 1: 36 000, and 1: 72 000 (by mole). The standard enthalpy of dissolution of argolide in 96% ethanol is calculated from the obtained data: (86 ± 17) kJ mol^?1. The temperature dependence of heat capacity of C₁₅H₂₀O₃ is studied by means of dynamic calorimetry. An equation is derived to describe the С _p ⁰ ~ f (Т) dependence, and the standard heat capacity at 298.15 K is found to be (393 ± 13) J mol^?1 K^?1. The enthalpies of combustion, fusion and formation of argolide are calculated via approximation.     

A calorimetric study of the thermodynamic properties of potassium molybdate

The low-temperature heat capacity of K₂MoO₄ was measured by adiabatic calorimetry. The smoothed heat capacity values, entropies, reduced Gibbs energies, and enthalpies were calculated over the temperature range 0–330 K. The standard thermodynamic functions determined at 298.15 K were C _p ^° (298.15 K) = 143.1 ± 0.2 J/(mol K), S°(298.15 K) = 199.3 ± 0.4 J/(mol K), H°(298.15 K)-H°(0) = 28.41 ± 0.03 kJ/mol, and Φ°(298.15 K) = 104.0 ± 0.4 J/(mol K). The thermal behavior of potassium molybdate at elevated temperatures was studied by differential scanning calorimetry. The parameters of polymorphic transitions and fusion of potassium molybdate were determined.     

Synthesis and study of high-temperature heat capacity of erbium orthovanadate

Orthovanadate ErVO₄ has been prepared by solid-phase synthesis from a stoichiometric mixture of high pure V₂O₅ and chemically pure Er₂O₃ by multistage calcination in air in the temperature range 873–1273 K. The effect of temperature (380–1000 K) on the heat capacity of orthovanadate ErVO₄ was studied by hightemperature calorimetry. Thermodynamic properties of erbium orthovanadate (enthalpy change H°(T)–H°(380 K), entropy change S°(T)–S°(380 K), and reduced Gibbs energy Φ°(T)) have been calculated from the experimental C_p = f(T) data. It has been shown that the specific heat varies in a row of oxides and orthovanadates of Gd-Lu naturally depending on the radius of the R³⁺ ion within the third and fourth tetrads.     

Low-temperature heat capacity and high-temperature thermal behavior of sodium lutetium molybdate phosphate Na<Subscript>2</Subscript>Lu(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

The low-temperature heat capacity of Na₂Lu (MoO₄)(PO₄) was measured by adiabatic calorimetry in the range of 7.47–345.74 K. The experimental data were used to calculate the thermodynamic functions of Na₂Lu (MoO₄)(PO₄). At 298.15 K, the following values were obtained: C _p ⁰ (298.15 K) = 237.7 ± 0.1 J/(K mol), S ⁰(298.15 K) = 278.1 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰ (0 K) = 42330 ± 20 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0. 3 J/(K mol). A heat capacity anomaly was found in the range of 10-67 K with a maximum at T _tr = 39.18 K. The entropy and enthalpy of transition are ΔS = 12.39 ± 0.75 J/(K mol) and ΔH = 403 ± 16 J/mol. The thermal investigation of sodium lutetium molybdate phosphate in the high-temperature range (623–1223 K) was performed using differential scanning calorimetry. It was found that during melting in the range of 1030–1200 K, Na₂Lu(MoO₄)(PO₄) degrades to simpler compounds; the degradation scenario is verified by X-ray powder diffraction.     

Thermodynamic Properties of Polyphenylquinoxaline in the Temperature Range of <Emphasis Type="Italic">T</Emphasis> → 0 to 570 K

The thermodynamic properties of amorphous polyphenylquinoxaline in the temperature range of 6 to 570 K are studied via precision adiabatic vacuum calorimetry and differential scanning calorimetry. The thermodynamic characteristics of glass transition are determined. Standard thermodynamic functions C^°_p, H°(T) ? H°(0), S°(Т) ? S°(0), and G°(T) ? H°(0) in the range of T → 0 to 570 K and the standard entropy of formation at T = 298.15 K are calculated. The low-temperature (T ≤ 50 K) heat capacity is analyzed using a multifractal model for the processing of heat capacity, fractal dimension D values are determined, and conclusions on the topological structure of the compound are drawn.     

Low-temperature heat capacity of sodium erbium molybdophosphate Na<Subscript>2</Subscript>Er(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

Adiabatic calorimetry is used to measure the low-temperature heat capacity of Na₂Er(MoO₄)(PO₄)from 6.41 to 347.87 K. Experimental data are used to calculate the thermodynamic functions of Na₂Er(MoO₄)(PO₄), which at 298.15 K are as follows: C _p ⁰ (298.15 K) = 243,3 ± 0.4 J/(K mol), S ⁰(298.15 K) = 312.8 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰(0 K) = 45280 ± 90 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0.3 J/(K mol). A diffuse heat-capacity anomaly associated with splitting of the Stark levels (Schottky anomaly) is discovered in the low-temperature region.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Heat capacities and thermal diffusivities of <Emphasis Type="Italic">n</Emphasis>-alkane acid ethyl esters—biodiesel fuel components

The heat capacities and thermal diffusivities of ethyl esters of liquid n-alkane acids C _n H_2n–1O₂C₂H₅ with the number of carbon atoms in the parent acid n = 10, 11, 12, 14, and 16 are measured. The heat capacities are measured using a DSC 204 F1 Phoenix heat flux differential scanning calorimeter (Netzsch, Germany) in the temperature range of 305–375 K. Thermal diffusivities are measured by means of laser flash method on an LFA-457 instrument (Netzsch, Germany) at temperatures of 305–400 K. An equation is derived for the dependence of the molar heat capacities of the investigated esters on temperature. It is shown that the dependence of molar heat capacity C _p,m (298.15 K) on n (n = 1–6) is close to linear. The dependence of thermal diffusivity on temperature in the investigated temperature range is described by a first-degree polynomial, but thermal diffusivity a (298.15 K) as a function of n has a minimum at n = 5.     

Thermodynamic parameters of phase transitions of perfluoro-N-(4-methylcyclohexyl)piperidine

The heat capacity of perfluoro-N-(4-methylcyclohexyl)piperidine (PMCP) was measured by low-temperature adiabatic calorimetry. The purity of the substance (N ₁ = 99.66 mol %), triple point temperature (T _tp = 293.26 K), and enthalpy of fusion (Δ_fus H _m ^° = 8.32 kJ/mol) were determined. The enthalpy of vaporization was measured by calorimetry at 298.15 K (Δ_vap H _m ^° (298.15 K) = 56.56 kJ/mol). The temperature dependence of the saturated vapor pressure of PMCP over the pressure range 6.2–101.6 kPa was determined by comparative ebulliometry. The normal boiling point (T _n.b. = 460.74 K), ehthalpies of vaporization (at various temperatures), and critical parameters of PMCP were calculated. The calculated and experimental values of Δ_vap H _m ^° (298.15 K) agree to within measurement errors, which proves the reliability of these values and pT parameters used in calculations.     

Synthesis and heat capacity study of stannates Dy<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the range 370–1000 K

Stannates Dy₂Sn₂O₇ and Ho₂Sn₂O₇ are produced by solid-phase synthesis from Dy₂O₃ (Ho₂O₃)–SnO₂ stoichiometric mixtures by calcining at 1473 K. The molar heat capacity of holmium and dysprosium stannates is measured by differential scanning calorimetry (DSC) in the temperature range 370–1000 K. The experimental data are used to calculate thermodynamic properties (enthalpy change H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and the reduced Gibbs free energy Φ°(T)) of the synthesized compound.     

Thermodynamic properties of triphenylantimony dibenzoate

The temperature dependence of the heat capacity of triphenylantimony dibenzoate Ph₃Sb(OC(O)Ph)₂ is studied in the range of 6–480 K by means of precision adiabatic vacuum calorimetry and differential scanning calorimetry. The melting of the compound is observed in this temperature range, and its standard thermodynamic characteristics are identified and analyzed. Ph₃Sb(OC(O)Ph)₂ is obtained in a metastable amorphous state in a calorimeter. The standard thermodynamic functions of Ph₃Sb(OC(O)Ph)₂ in the crystalline and liquid states are calculated from the obtained experimental data: C_p^°(T), H°(T)–H°(0), S°(T), and G°(T)–H°(0) for the region from T → 0 to 480 K. The standard entropy of formation of the compound in the crystalline state at T = 298.15 K is determined. Multifractal processing of the low-temperature (T < 50 K) heat capacity of the compound is performed. It is concluded that the structure of the compound has a planar chain topology.     

High-temperature heat capacity of erbium titanate with a pyrochlore structure

Erbium titanate with a pyrochlore structure has been synthesized by a ceramic method from stoichiometric Er₂O₃–TiO₂ mixtures at 1673–1773 K. The high-temperature heat capacity of Er₂Ti₂O₇ (320–1000 K) has been studied by differential scanning calorimetry. The thermodynamic functions of this oxide compound—enthalpy and entropy changes and reduced Gibbs—have been calculated from the experimental dependence C _P = f(T).     

Thermodynamics of a third-generation poly(phenylene-pyridyl) dendron decorated with dodecyl groups in the range of <Emphasis Type="Italic">T</Emphasis> → 0 to 480 K

The heat capacity of a glassy third-generation poly(phenylene-pyridyl) dendron decorated with dodecyl groups is studied for the first time via high-precision adiabatic vacuum and differential scanning calorimetry in the temperature range of 6 to 520 K. The standard thermodynamic functions (molar heat capacity C_p^°, enthalpy H°(T), entropy S°(T), and Gibbs energy G°(T)-H°(0)) in the range of T → 0 to 480 K, and the entropy of formation at 298.15 K, are calculated on the basis of the obtained data. The thermodynamic properties of the dendron and the corresponding third-generation poly(phenylene-pyridyl) dendrimer studied earlier are compared.     

Synthesis and heat capacity of NdVO<Subscript>4</Subscript> in the temperature range of 384–859 K

Heat capacity of NdVO₄ was determined in the temperature range of 384–859 K using differential scanning calorimetry. The thermodynamic functions (H°(T)–H°(384 K), S°(T)–S°(384 K), and Φ°) of neodymium orthovanadate were calculated using the experimental C_p = f(T) values. The structure of NdVO₄ was studied at 298 and 973 K.     

Heat capacity and thermodynamic functions of ferrocenemethanol

The heat capacity (C _{p, m}) of ferrocenemethanol (FM) C₅H₅FeC₅H₄CH₂OH have been measured by the low-temperature adiabatic calorimetry method in the range 6–371 K. The triple point temperature, the enthalpy of fusion, and the purity of the substance under consideration have been determined. The ideal gas thermodynamic functions of FM—absolute entropy S _m(g) ⁰ and change in the enthalpy Δ ₀ ^T H _m at 298.15 K—have been derived from the heat capacity data and the known values of the saturation vapor pressure and enthalpy of sublimation. The ideal gas thermodynamic functions C _{p, m} ⁰ and S _m(g) ⁰ and the enthalpy of formation of FM have been calculated by the empirical difference method at T = 298.15 K. The experimental and calculated values of the thermodynamic functions are consistent within error limits, which proves their reliability.     

Thermodynamic Properties of Zincate-Manganites of LaM<Subscript>2</Subscript> <Superscript>II</Superscript>ZnMnO<Subscript>6</Subscript> (М<Superscript>II</Superscript> = Mg,Ca, Sr,Ba) Composition

Temperature dependences of the heat capacity of new zincate-manganites of LaM₂^IIZnMnO₆ (M^II = Mg, Ca, Sr, Ba) composition are studied via experimental calorimetry in the interval of 298.15–673 K. It is found that all compounds have λ-shape effects on the curve of dependence C_p° ~ ?(T) with respect to phase transitions of the second kind. Equations for the temperature dependence of the heat capacity are derived with allowance for phase transition temperatures, and thermodynamic functions H°(T) ? H°(298.15), S°(T) and Φ^xx(T) are calculated on the basis of experimental data on C_p°(T) and the calculated S°(298.15) value.     

Concentration,temperature, and isotopy effects on the heat capacity of aqueous urea

Relations for the apparent molar heat capacity ?_c of urea in an aqueous solution depending on the molality m and temperature were obtained. A transition to the relations ?_c(m,T) for D₂O-(ND₂)₂CO and T₂O-(NT₂)₂CO systems was effected by temperature scaling. At low temperatures, the isotherms of the molar heat capacity C _p(m) of the protium and deuterium systems have minima shifted to more dilute solutions at elevated temperatures. At m = 1, C _p of a solution does not depend on temperature in both systems. The dependences C _p(T) also have minima at constant concentrations. The temperature of the minimum heat capacity is most effectively lowered by small additions of urea. For m = 0.25, T _min is 7.5 K lower than T _min of pure water, and its heat capacity is 0.08 J/(mol K) higher. A transition from m = 1.5 to m = 2 lowers the temperature of the minimum heat capacity by 3.6 K; thus, the heat capacity of solutions differs by 0.02 J/(mol K) only.     

Thermodynamic properties of a second-generation poly(phenylene-pyridyl) dendron with a dodecyl-decorated periphery

The heat capacity of a partially crystalline second-generation poly(phenylene-pyridyl) dendron with a dodecyl-decorated periphery is studied by high-precision adiabatic vacuum and differential scanning calorimetry in the temperature range of 6 to 530 K. The thermodynamic characteristics of the glass’s transition and melting are determined from the calorimetric data and the degree of its crystallinity is estimated (α = 30%). Standard thermodynamic functions (C_p°, H°-H°(0), S°-S°(0), and G°-H°(0)) for a partially crystalline dendron in the range of T → 0 to 480 K are calculated.     

Thermodynamics of the terpolymer of carbon monoxide,ethylene, and 1-butene

The heat capacity and the temperatures and enthalpies of physical transformations of the alternating terpolymer of carbon monoxide, ethylene, and 1-butene (the content of butene units is 10.7 mol.%) were studied by adiabatic and differential scanning calorimetry in the temperature range from 6 to 520 K. The energy of terpolymer combustion was measured at 298.15 K on an calorimeter with an isothermal shell and static bomb. The standard thermodynamic functions C°_p(T), H°(T)–H°(0), S°(T)–S°(0), and G°(T)–H°(0) for the range from Т → 0 to 400 K, the standard enthalpy of combustion, and the thermodynamic parameters of formation of the partially crystalline CO—ethylene—1-butene terpolymer at 298.15 K, as well as the thermodynamic characteristics of its synthesis in the range from T → 0 to 400 K were calculated.     

Thermodynamic properties of first- and third-generation carbosilane dendrimers with terminal phenyldioxolane groups

The heat capacities of first- and third-generation carbosilane dendrimers with terminal phenyldioxolane groups are studied as a function of temperature via vacuum and differential scanning calorimetry in the range of 6 to 520 K. Physical transformations that occur in the above temperature range are detected and their standard thermodynamic characteristics are determined and analyzed. Standard thermodynamic functions C_p^ο(T), [H°(T) ? H°(0)], [S°(T) ? S°(0)], and [G°(T) ? H°(0)] in the temperature range of T → 0 to 520 K for different physical states and the standard entropies of formation of the studied dendrimers at T = 298.15 K are calculated, based on the obtained experimental data.