All-fiber Raman supercontinuum generator

The results on an all-fiber supercontinuum generator that exhibits a continuous wide spectrum in the range 1060–1640 nm predominantly owing to the cascade stimulated Raman scattering in a single-mode quartz fiber at a relatively high power of the combined femtosecond-picosecond pumping with a central wavelength of 1080 nm are presented for the first time. The mean power of the supercontinuum is 2.1 W.     

All-fiber high-energy supercontinuum pulse generator

An all-fiber supercontinuum generator with a record-high pulse energy of 40 μJ is presented. The generator is based on a nanosecond ultralong high-energy mode-locked Yb-doped fiber laser with an additional amplification stage. The supercontinuum spectrum belongs to the wavelength range 500–1750 nm, and a relatively uniform spectral distribution of the intensity is observed in the interval 1125–1550 nm. The mean power of the supercontinuum is greater than 1.5 W. The simulation of such a generator yields the integrity of the supercontinuum pulse on the nanosecond time scale and shows that the pulse can be characterized by a certain energy in contrast to the multipulse complicated trains of supercontinuum corresponding to the femtosecond and picosecond pumping.     

Fiber supercontinuum generators with dynamically controlled parameters

Various methods to dynamically control the supercontinuum (SC) parameters are analyzed. The possibility of variations in the SC power spectral density due to variations in the wavelength and pulse repetition rate of the pumping laser is considered. An increase in the SC coherence owing to the optimization of the pumppulse frequency modulation is discussed. A variation in the repetition rate of the SC pulses generated in the scheme with the two-wavelength pumping due to a variation in the frequency difference is studied.     

激光泵浦碲化物产生中红外超连续谱数值模拟

对2 m波段脉冲激光泵浦碲化物光子晶体光纤产生中红外超连续谱进行了数值研究。通过材料的拉曼增益谱间接求得了对应的拉曼响应函数;由光子晶体光纤的材料折射率和波导结构,通过COMSOL软件获得了碲化物光子晶体光纤中基模等效折射率,计算了相应的色散曲线和限制损耗 ;利用自适应的分步傅里叶算法,模拟了中心波长为1.96m、峰值功率为20 kW的50 fs脉冲光泵浦碲化物光子晶体光纤时超连续谱的产生,当光纤长度为6 cm时,产生的中红外超连续谱波长范围为1.0~4.5 m。     

激光泵浦碲化物产生中红外超连续谱数值模拟

对2 m波段脉冲激光泵浦碲化物光子晶体光纤产生中红外超连续谱进行了数值研究。通过材料的拉曼增益谱间接求得了对应的拉曼响应函数;由光子晶体光纤的材料折射率和波导结构,通过COMSOL软件获得了碲化物光子晶体光纤中基模等效折射率,计算了相应的色散曲线和限制损耗 ;利用自适应的分步傅里叶算法,模拟了中心波长为1.96m、峰值功率为20 kW的50 fs脉冲光泵浦碲化物光子晶体光纤时超连续谱的产生,当光纤长度为6 cm时,产生的中红外超连续谱波长范围为1.0~4.5 m。     

Temporal structure of a supercontinuum generated under pulsed and CW pumping

The numerical simulation based on the solution to the generalized nonlinear Schrödinger equation is used to analyze various regimes of the supercontinuum generation in optical fibers under pulsed and CW excitation. The time dependences of the supercontinuum intensity are studied, and the optimal generation regimes are discussed with respect to various applications of the supercontinuum.     

Fiber supercontinuum generators with an extended set of controlled parameters in real time scale

Different methods for controlling the radiation parameters of supercontinuum (SC) are analyzed. In particular, the possibility of varying the SC spectral power density due to variations in the pulse repetition rate and radiation wavelength of the pumping laser, the increase in the SC degree of coherence due to the choice of the optimal phase modulation of pumping pulses, and the variations in the SC pulse repetition rate in the two-wave pumping scheme due to the variations in the frequency difference are considered. A new method for controlling the spectrum width and the spectral power density level of the SC generated upon continuous excitation using an additional noise pumping component is proposed.     

Continuous-wave pumping in the anomalous- and normal-dispersion regimes of nonlinear fibers for supercontinuum generation

Supercontinuum (SC) growth in highly nonlinear fibers is compared for cw pumping in the anomalous- and normal-dispersion regimes. For anomalous-dispersion pumping, the combined effects of modulation instability (MI) and stimulated Raman scattering (SRS) contribute to spectral broadening. Furthermore, breakup of the cw light into ultrashort pulses by MI leads to the formation of a Raman pulse that evolves into a soliton, as evidenced by the observation of soliton self-frequency shift. Blueshifted, nonsolitonic radiation associated with the fission of higher-order solitons is also present in the SC spectra. For normal-dispersion pumping, SRS seeds the SC growth by generating several cascaded Stokes orders. When the Stokes orders are shifted into the anomalous-dispersion regime at higher launch powers, MI again causes soliton formation. Broadband continua are generated when the laser is positioned as far away as 191 nm from the zero-dispersion wavelength in normal dispersion.     

Mid-infrared supercontinuum generation to 4.5 microm in ZBLAN fluoride fibers by nanosecond diode pumping

A mid-infrared supercontinuum (SC) is generated in ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF...) fluoride fibers from amplified nanosecond laser diode pulses with a continuous spectrum from approximately 0.8 microm to beyond 4.5 microm. The SC has an average power of approximately 23 mW, a pump-to-SC power conversion efficiency exceeding 50%, and a spectral power density of approximately -20 dBm/nm over a large fraction of the spectrum. The SC generation is initiated by the breakup of nanosecond laser diode pulses into femtosecond pulses through modulation instability, and the spectrum is then broadened primarily through fiber nonlinearities in approximately 2-7 m lengths of ZBLAN fiber. The SC long-wavelength edge is consistent with the intrinsic ZBLAN material absorption.     

Fiber laser as an optical-signal generator

It has been experimentally demonstrated that the power of the polarized radiation of an ytterbium-fiber laser can effectively be controlled using the loss modulation in the competing generation channel with the orthogonal polarization. Various light pulses (rectangular, triangular, saw-tooth shaped, and trapezoidal) can be generated in the ytterbium-fiber laser due to the competition of orthogonally polarized generation channels.     

Phase-shifting interferometric profilometry with a wavelength-tunable diode source

A phase-shifting interferometer with a tunable external-cavity laser diode has been constructed for forming three-dimensional (3-D) phase profiles. The interference phase is shifted equally in four steps by varying the source wavelength. Profilometry is achieved by measuring the phase shifts that are extracted by the Carré algorithm. The linear regression of the distance measurement from 40 μm to 13mm has been experimentally demonstrated by phase-shifting interferometry. A laser-diode interferometer has been applied to 3-D profile measurement for a step-mirror object at a deep depth.     

Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

Broadband normal dispersion pumping supercontinuum （SC） generation in silica photonic crystal fiber （PCF） is investigated in this paper. A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation. The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region. The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme. The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration, and the pump-to-SC conversion efficiency is up to 90%. In order to avoid the output fiber end face damage and increase the stability of the system, an improved output solution for the high power SC is proposed in our experiment. This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.     

Efficient visible femtosecond optical parametric generator and amplifier using tilted pulse-front pumping

Using pulses with tilted pulse fronts to compensate for the group-velocity mismatch in three-wave interactions, we constructed an efficient 400-nm pumped femtosecond collinear typeI phase-matched beta -barium borate optical parametric generator and amplifier. The signal and idler outputs are tunable from 470nm to 2.7 microm and have pulse widths in the range of 100170fs at a 1-kHz repetition rate. A maximum output energy of 6.5 microJ and a total conversion efficiency of more than 15% were achieved.     

Laguerre-Gaussian supercontinuum

We show what is believed to be the first coherent white-light optical vortices generated from supercontinuum that have the azimuthally varying phase structure consistent with a monochromatic Laguerre-Gaussian beam. Two methods of Laguerre-Gaussian supercontinuum generation are discussed and contrasted. We use a computer-generated hologram to convert a Gaussian white-light supercontinuum source into Laguerre-Gaussian supercontinuum.     

声光可调谐环形腔掺铒光纤激光器

应用单级偏振无关的准共线型声光可调谐滤波器为调谐元件,实现了环形腔掺铒光纤激光器的连续可调谐激光输出.简要阐述了与偏振无关的准共线型声光可调谐滤波器的工作原理,对其频移补偿原理进行了分析.实验研究得到:当抽运功率为13mW时,中心波长为1550nm的激光输出功率为322μW,阈值抽运功率在7.65mW左右,斜率效率约为6.02%;并获得了38nm带宽(1524.7—1562.4nm)的连续可调谐激光输出.     

Seeded supercontinuum generation with optical parametric down-conversion

The transition between modulation instability gain and induced soliton fission in nonlinear fiber is experimentally investigated by coherent seeding with the two-color output of an optical parametric oscillator. This approach produces supercontinuum spectra displaying persistent, fine modulation from seeding-induced noise reduction. Numerical simulations support the findings.     

Random Bragg-grating-based wavelength-tunable random fiber laser with a full-open cavity

A full-open-cavity wavelength-tunable random fiber laser(WT-RFL) with compact structure and hundreds of picometers tuning range is proposed and demonstrated. A π fiber Bragg grating(FBG) is used in the WT-RFL as a filter to select lasing wavelengths. The two random Bragg grating arrays(RBGAs) and a section of high gain erbium-doped fiber result in a low lasing threshold and high stability. A numerical model to analyze the tunable characteristics is developed. The results show that the laser threshold is 22 m W, and the maximum peak-power fluctuation is 0.55 d B. To the best of our knowledge, it is the first time that a compact and full-open-cavity WT-RFL with two RBGAs and a π-FBG is proposed.     

Visible cw-pumped supercontinuum

We report the experimental demonstration of a visible supercontinuum in the cw pumping regime. A 20 W ytterbium fiber laser at 1.06 microm is used to pump a photonic crystal fiber whose zero-dispersion wavelength decreases along the fiber length. Visible wavelengths are generated in the fundamental mode via trapping of dispersive waves by redshifted solitons.     

用于泵浦非链式HF/DF化学激光器的重复频率电子束发生器研究

 正在研究的1Hz重复频率电子束泵浦HF/DF化学激光器，预期产生的电子束能量为0.5MeV、束流强度为100kA、束流脉冲宽度为100ns。在该系统设计中，使用了一个脉冲变压器来对脉冲成形水线进行双共振充电。脉冲变压器的初级、次级电感与互感分别为331nH，26.5μH与1.9μH。脉冲成形线的电容、电感与阻抗分别为8.15nF，300nH与6.2Ω。脉冲成形线在1MV的峰值充电电压下的击穿因子为0.3。在3.3%的能量转换效率条件下，预期可以产生的HF/DF激光脉冲能量为２50J以上。     

All-fiber,wavelength-tunable ultrafast praseodymium fiber laser

The interest in tunable ultrafast fiber lasers operating in the 1.3 μm region has seen a significant increase due to rising demands for bandwidth as well as the zero-dispersion characteristic of silica fibers in this wavelength region. In this work, a tunable mode-locked praseodymium-doped fluoride fiber(PDFF) laser using single-walled carbon nanotubes as a saturable absorber is demonstrated. The mode-locked pulses are generated at a central wavelength of 1302 nm with a pulse repetition rate of 5.92 MHz and pulse width of 1.13 ps. The tunability of the mode-locked PDFF laser covers a tuning range of 11 nm.