Influence of the modification of the ligands on hex-1-ene hydroformylation catalyzed by [HRh{P(OPh)3}4] and [HRh(CO){P(OPh)3}3]. Catalytic activity of the sytem [HRh}P(OPh)3}4]+Cp2Zr(CH2PPh2)2

A study has been carried out of the catalytic activity of the systems formed by [HRh{P(OPh)₃}₄] or [HRh(CO){P(OPh)₃}₃] with the modifying ligands P(OPh)₃, PPh₃, diphos and Cp₂Zr(CH₂PPh₂)₂ in hydroformylation of hex-1-ene (at p = 5 bar). The best results were obtained with the system [HRh{P(OPh)₃}₄]+Cp₂Zr(CH₂PPh₂)₂ (75–85% yeild of aldehydes).     

Perfluormethyl-element-liganden : XXXI. Ligandeneigenschaften von Me2PP(CF3)2 und Me2AsP(CF3)2

The coordinating properties of the trifluoromethyl elemental compounds Me₂PP(CF₃)₂ and Me₂AsP(CF₃)₂ have been studied by the synthesis and spectroscopic investigations (IR, NMR, MS) of their complexes cis-M(CO)₄L₂ (A), [(CO)₄ML]₂ (B) and [(CO)₅M]₂L (C) (M = Cr, Mo, W). Complexes of type A with L = Me₂PP(CF₃)₂ are obtained in good yield by reaction with M(CO)₄NBD (NBD = norbornadiene), whereas with L = Me₂AsP(CF₃)₂ the homobinuclear compounds B are formed. The attempt to prepare the cis-M(CO)₄[Me₂AsP(CF₃)₂]₂ complexes by treating M(CO)₄(Me₂AsH)₂ with P₂(CF₃)₄ is successful only for M = W. Binuclear compounds of type B or C, in general, can be prepared by stepwise reaction of the ligands with either M(CO)₄NBD or M(CO)₅THF.     

Preparation and characterization of [Re(bpy)(CO) 3L][SbF6] (L = phosphine, phosphite)

A series of rhenium complexes [fac-Re(bpy)(CO)₃L][SbF₆] (bpy = 2,2′-bipyridine, L = P(ⁿBu)₃, PEt₃, PPh₃, P(OMe)Ph₂, P(OⁱPr)₃, P(OEt)₃, P(OMe)₃, P(OPh)₃) has been prepared and characterized by the IR, UV-vis, ¹H NMR, ³¹P NMR, X-ray photoelectron spectroscopy and electrochemical techniques. Variations in the electronic properties, i.e. CO stretching, metal-to-ligand charge transfer transition, and ³¹P NMR chemical shifts were interpreted on the basis of the electron-acceptor strength of L. However, the redox potential corresponding to [Re(bpy)(CO)₃L]⁺/[Re(bpy⁻)(CO)₃L]showed ‘V-character type’ changes after the increase in the electron-acceptor strength of L. Variation of the P(2p) binding energy of the phosphorus atom indicated that the electronic structure of the coordinated phosphorus atom was strongly influenced by the electronic properties of the directly attached substituents.     

Homochiral cyclopentane-based C1-symmetric P,P ligands C5H8(PPh2)(PR2) from C2-symmetric C5H8(PCl2)2

Treatment of 1,2-trans-C₅H₈(PCl₂)₂ with 1,2-C₂H₄(NHPr-i)₂ gave the C₂-symmetric perhydro-1,6,2,5-diazaphosphocine C₅H₈{P(Cl)N(Pr-i)CH₂}₂-cyclo, which produced dissymmetric C₅H₈(PPh₂){P[N(Pr-i)CH₂]₂-cyclo} on further reaction with PhMgBr. Cleavage of the P---N bonds with gaseous HCl afforded C₅H₈(PPh₂)(PCl₂), which was converted to C₅H₈(PPh₂){P(OPh)₂}₂ by reaction with phenol. All chiral P,P derivatives were obtained as racemates as well as resolved (1R,2R)- and (1S,2S)-enantiomers.     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

Multiple ligand transfer reaction between [CpRu(L)(AN)2][PF6] (L=AN, CO, P(OMe)3; AN=acetonitrile) and CpFe(CO)L′X (L′=CO, PMe3, PMe2Ph, PMePh2, PPh3, P(OPh)3; X=Cl, Br, I)

Treatment of ruthenium complexes [CpRu(AN)₃][PF₆] (1a) (AN=acetonitrile) with iron complexes CpFe(CO)₂X (2a–2c) (X=Cl, Br, I) and CpFe(CO)L′X (6a–6g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Cl, Br, I) in refluxing CH₂Cl₂ for 3 h results in a triple ligand transfer reaction from iron to ruthenium to give stable ruthenium complexes CpRu(CO)₂X (3a–3c) (X=Cl, Br, I) and CpRu(CO)L′X (7a–7g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Br, I), respectively. Similar reaction of [CpRu(L)(AN)₂][PF₆] (1b: L=CO, 1c: P(OMe)₃) causes double ligand transfer to yield complexes 3a–3c and 7a–7h. Halide on iron, CO on iron or ruthenium, and two acetonitrile ligands on ruthenium are essential for the present ligand transfer reaction. The dinuclear ruthenium complex 11a [CpRu(CO)(μ-I)]₂ was isolated from the reaction of 1a with 6a at 0°C. Complex 11a slowly decomposes in CH₂Cl₂ at room temperature to give 3a, and transforms into 7a by the reaction with PMe₃.     

Synthesis, characterization and the unpleasantly disordered crystal structure of Ir(Ome)(CO)(PPh3)2(SO4)

The adducts of O₂ and SO₂ with trans-MeOIr(CO)(PPh₃)₂ are formed in equilibria and have been characterized. Reaction of the SO₂ adduct, Ir(OMe)(SO₂)(CO)(PPh₃)₂ with dioxygen leads to the sulfato complex, Ir(Ome)(CO)(PPh₃)₂(SO₄), the structure of which has been determined. Ir(Ome)(CO)(PPh₃)₂(SO₄) crystallizes in the monoclinic system with a 11.958(2), b 14.163(3), c 12.231(2) Å, β 118.365(12)°, V 1822.7(6) ų and Z = 2. Diffraction data for 2θ = 4.5–45.0° (Mo-K) were collected with a Syntex P2₁ diffractometer and the structure was solved (assuming space group P2₁/m and an unpleasant 2-fold disordered model) and refined to R = 4.8% for all 2512 independent data (R = 3.5% for those 2042 data with ¦F_O¦ > 6σ(¦F¦)). The iridium(III) atom has a distorted octahedral coordination sphere with trans PPh₃ ligands and a cis-chelating bidentate O,O′-SO₄ group; the structure is completed by mutually cis OMe and CO ligands.     

Rhenium(I) methoxo carbonyl complexes containing tetraphosphine or triphosphine ligands; facile separation and X-ray crystallographic studies of d/l- and meso-[{Re2(μ-OMe)2(CO)6}2(μ,μ′-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetra-phosphadecane)]

Reaction of the activated mixture of Re₂(CO)_10, Me₃NO and MeOH with a 1:1 mixture of rac (d/l)- and meso-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane (hptpd) yields a mixture of (d/l)- and meso-[{Re₂(μ-OMe)₂(CO)₆}₂(μ,μ′-hptpd)] 1. The diastereomers can be easily separated by selective dissolution of d/l-1 in benzene, and give clearly distinguishable ¹H- and ³¹P-NMR spectra. The fluxional behavior of d/l-1 in solution has been studied by variable-temperature ¹H- and ³¹P-{¹H}-NMR spectroscopy. The crystal structures of both d/l- and meso-1 have been determined. Both molecules consist of two {Re₂(μ-OMe)₂(CO)₆} moieties which are bridged by the two P---CH₂---CH₂---P moieties of the hptpd ligand. Whilst the molecules of meso-1 possess crystallographic i-symmetry, those of d/l-1 do not have any crystallographic symmetry. These diastereomers therefore give clearly distinguishable Raman spectra in the solid state. Reaction of tris[2-(diphenylphosphino)ethyl]phosphine (tdppep) with the activated mixture affords the complex [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-tdppep)] 2, and the analogous reaction involving bis[2-diphenylphospinoethyl)phenylphosphine (triphos) gives [{Re₂(μ-OMe)₂(CO)₆}(μ,μ′,η³-triphos){Re₂(CO)₉}] 3 and [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-triphos)] 4.     

Structural study of Mn2(CO)8[P(NMe2)3]2

An X-ray crystal structure determination for the bimetallic complex Mn₂(CO)₈-[P(NMe₂)₃]₂ reveals that the P(NMe₂)₃ ligands are trans to the Mn---Mn bond and the Mn---Mn bond distance is relatively long, 2.946(1) Å.     

Heterobimetallic Mo---Sn complexes. Reactions of [Mo(CO)3(CH3CN)2(Cl)(SnRCl2)] (R = Me, Ph) with 4(4-XC6H4)3 (X = Cl, F, H, Me, MeO)

Three families of heterobimetallic compounds were obtained by reaction of [Mo(CO)₃(CH₃CN)₂(Cl)(SnRCl₂)] (R = Ph, Me) with P(4-XC₆H₄)₃ (X = Cl, F, H, Me, MeO). The type of compound obtained dependent on the solvent and concentration of the starting compound. So, [Mo(CO)₂(CH₃COCH₃)₂(PPh₃)(Cl)(SnRCl₂)]·nCH₃COCH₃ (R = Ph, n = 0.5; R = Me, n = 1) (type I) and [Mo(CO)₃{P(4-XC₆H₄)₃}(μ-Cl)(SnRCl₂)]₂ (R = Ph, X = Cl, F, H, Me, MeO; R = Me, X = Cl, F) (type II) were isolated from acetone solution in ca 0.05 M and 0.1 M concentrations, respectively. However, [Mo(CO)₃(CH₃CN) {P(4-XC₆H₄)₃}(Cl)(SnRCl₂)] (R = Ph, X = H; R = Me, X = Cl, F, H) (type III) were obtained from dichloromethane solution independently of the concentration used. All new complexes showed a seven-coordinate environment at molybdenum, containing Mo---Cl and Mo---Sn bonds. Mössbauer spectra indicated a four-coordination at tin for type III complexes.     

Synthesis and characterization of Na5[Co(CO)3(P{(CH2)nC6H4-P-SO3}3)2], n = 1, 2, 3, and 6. Novel zwitterion

The electron donating water soluble phosphines, P{(CH₂)nC₆H₄-p-SO₃Na}₃,n = 1, 2, 3 and 6, react rapidly with Co₂(CO)₈ under two phase reaction conditions to yield the disproportionation products, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃Na₃}₂] [Co(CO)₄]. Selective precipitation yields the formally zwitterionic complex anions as the sodium salt, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃} ₃)₂]⁵⁻. The anions can be used as precursors to water soluble cobalt hydroformylation catalysts under two phase and supported aqueous phase conditions. The tendency to form alcohol products is low with these complexes. The behavior of the catalysts is consistent with an active species that remains water soluble during the reaction and is not leached into the nonaqueous phase.     

Studies of N-heterocyclic compounds with triosmium clusters: Formation of the heterocyclic-linked dicluster compound [Os 6(μ-H)2(μ3-C6H4N3)2(CO)18]

The cluster [Os₃(CO)₁₀(MeCN)₂] reacts with indazole (C₇H₆N₂) to give two isomeric products [0s₃(μ-H)(μ-C₇H₅N₂)(CO)₁₀] in which the five-membered ring has been metallated with N-H cleavage to give an N,N-bonded isomer or with C-H cleavage to give a C,N-bonded isomer. These two isomers have very similar X-ray structures but can be clearly distinguished by ¹H NMR methods. They are shown to correspond to related clusters derived from pyrazole. Benzotriazole (C₆H₅N₃) also reacts (as shown earlier by others) to give two isomers: an N,N-bonded species [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀] coordinated only through the five-membered ring and a minor C,N-bonded isomer [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀], metallated at the C₆ ring and coordinated through both rings. The former isomer reacts with Me₃NO in acetonitrile to give [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₉(MeCN)] which thermally looses MeCN to produce the coupled product [Os₆(μ-H)₂(μ₃-C₆H₄N₃)₂(CO)₁₈] which was shown by X-ray structure determination to have all six nitrogen atoms coordinated to osmium, a novel situation for coordinated benzotriazole. The two Os₃ units are linked together by an OsNNOsNN ring in a boat conformation with the whole cluster adopting C₂ symmetry.     

Equilibrium diagram of KPO3–Y(PO3)3 system, chemical preparation and characterization of KY(PO3)4

Microdifferential thermal analysis (μ-DTA), X-ray diffraction (XRD) and infrared (IR) spectroscopy were used for the first time to investigate the liquidus and solidus relations in the KPO₃–Y(PO₃)₃ system. The only compound observed within the system was KY(PO₃)₄ melting incongruently at 1033 K. An eutectic appears at 13.5 mol% Y(PO₃)₃ at 935 K, the peritectic occurs at 1033 K and the phase transition for potassium polyphosphate KPO₃ was observed at 725 K. Three monoclinic allotropic phases of the single crystals were obtained. KY(PO₃)₄ polyphosphate has the P2₁ space group with lattice parameters: a=7.183(4) Å, b=8.351(6) Å, c=7.983(3) Å, β=91.75(3)° and Z=2 is isostructural with KNd(PO₃)₄. The second allotropic form of KY(PO₃)₄ belongs to the P2₁/n space group with lattice parameters: a=10.835(3) Å, b=9.003(2) Å, c=10.314(1) Å, β=106.09(7)° and Z=4 and is isostructural with TlNd(PO₃)₄. The IR absorption spectra of the two forms show a chain polyphosphates structure. The last modification of KYP₄O₁₂ crystallizes in the C2/c space group with lattice parameters: a=7.825(3) Å, b=12.537(4) Å, c=10.584(2) Å, β=110.22(7)° and Z=4 is isostructural with RbNdP₄O₁₂ and contains cyclic anions. The methods of chemical preparations, the determination of crystallographic data and IR spectra for these compounds are reported.     

Coordination geometry of chromium(VI) species. The first example of cis-bridging chromate ions in helically structured catena(μ-CrO4-O,O′)[Ni(HIm)3H2O]

Nickel(II) chromate complex with imidazole (HIm) was isolated from the [Ni²⁺–HIm–CrO₄²⁻] system in various experimental conditions, i.e. reagent molar ratios and nickel(II) salts. The catena(μ-CrO₄-O,O′)[Ni(HIm)₃H₂O] (1) crystallizes in monoclinic crystal system—space group P2₁/n with cell parameters: a=11.784(2), b=8.899(2), c=13.934(3) (Å), β=95.19(3) (°). The unit cell contains two independent helixes, left- and right-handed, stabilized by intrahelical and interhelical hydrogen bonds (HB) and π–π interactions. The cis coordination of the CrO₄²⁻ anions and the HB systems appeared to be the main determinants of the helical architecture. To the best of our knowledge the cis-chromate coordination was observed for the first time. The cis coordination causes the distortion of the nickel octahedron, which was analysed by 4 K single crystal electronic spectra with D_4h symmetry approximation (gaussian resolution and crystal field parameters). This symmetry was also confirmed with the polarised electronic spectra. The magnetic properties of the complex suggest the occurrence of weak intrachain antiferromagnetic interactions between the magnetic Ni^II center. The computational DFT studies of complex 1 assuming three possible isomers mer[(HIm)₃]–cis[(CrO₄²⁻)₂], mer–trans and fac–cis suggested that the main contribution to the stability of 1 might have interhelical and intrahelical hydrogen bonds.     

A novel arene bonding mode in the mixed-metal cluster Os4Ru(μ-H) 3(CO) 12(μ3-η-C6H5) P(OMe)3

The ionic coupling of [Os₄H₂(CO)₁₂]²⁻ with [Ru(η⁶-C₆H₆)(MeCN)₃]²⁺ affords the neutral mixed metal cluster Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆) 1. The reaction of 1 with trimethylphosphite leads to the initial formation of the addition product Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆)P(OMe)₃ 2, but this complex rearranges in solution to give Os₄Ru(μ-H)₃(CO)₁₂(μ₃-η⁶-C₆H₅)P(OMe)₃ 3. An X-ray structure of 3 shows that the metal core of the cluster is a ruthenium-spiked Os₄ tetrahedron, with one hydrogen atom from the arene having transferred to the Os₄ core, and one arene carbon bridging an Os-Os edge, while the ring as a whole remains η⁶-bound to the Ru atom.     

The reactivity of dimethylaluminum hydride with the aminoarsines Me2AsNMe2, MeAs(NMe2)2, and As(NMe2)3

The reactions of (Me₂AlH)₃ with Me₂AsNMe₂, MeAs(NMe₂)₂, and As(NMe₂)₃ were investigated as a function of time at room temperature and over the temperature range −90 to 24°C by use of ¹H and ¹³C NMR spectroscopy. (Me₂AlH)₃ was found to be very reactive toward the aminoarsines, even at −90°C, and no stable Me₂AlH-aminoarsine adducts were observed. Instead, the initial stages of the reactions involved AS---N bond cleavage with the generation of highly reactive AlN- and AsH-bonded species. The subsequent course of each reaction and the final arsenic-containing product distribution depended upon the original AL:N stoichiometric ratio and the respective aminoarsine. When the Al:N ratio was 1:1, the reactions were straightforward for each aminoarsine. However, in every case, [Me₂AlNMe₂]₂ was the final AlN-containing product. Independent reactions were carried out to verify many of the proposed decomposition pathways that lead to thermodynamically stable products. The results of this study are compared with those of the analogous, previously reported (Me₃Al)₂-aminoarsine systems. Additionally, a new synthetic route to [Me₂AlAsMe₂]₃ has been established from the reaction of (Me₂AlH)₃ with Me₂AsH.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

[(Me3Sn)2(Me3Sb)M(CN)6]∞ (M = Fe, Ru): Neuartige Organo-Sn/Sb-Polymere von besonderer chemischer und thermischer stabilität

The thermally (decomp. temp. 300°C) and completely air stable, novel coordination polymers [(Me₃Sn^IV)₂(Me₃Sb^V)M^II(CN)₆]_∞ with M = Fe and Ru can be prepared by co-precipitation from aqueous solutions of Me₃SnCl, Me₃SbBr₂ and K₄[(M(CN)₆], or, alternatively, by the ion-exchange-like reaction of the polymers [A(Me₃Sn)₃M(CN)₆]_∞ (A⁺ = Et₄N⁺, Cp₂Co⁺, Me₃Sn⁺ etc.) with Me₃SbBr₂. IR-spectroscopic findings suggest a statistical distribution of quasi-octahedral M(CN-Sn··)_6-x(CNSb ··)_x building blocks (with x = 0–6) within a three-dimensional network.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Synthesis and structure of the iron-substituted silylacetylene [(η-C5H5)Fe(CO)2SiMe2C]2 and its cobalt hexacarbonyl derivative [(η-C5H5)Fe(CO)2SiMe2C]2 · Co2(CO)6

A transition metal-substituted silylacetylene [(η⁵-C₅H₅)Fe(CO)₂SiMe₂C]₂, [FpMe₂SiC]₂ (I) was synthesized and characterized spectroscopically and structurally. I crystallized in the monoclinic space group P2₁/n, A = 13.011(3) Å B = 12.912(3) Å, C = 13.175(5) Å, β = 94.95(2). The acetylene linkage is reactive toward Co₂(CO)₈ to form I. Co₂(CO)₆ (II) which was also characterized spectroscopically and by single crystal X-ray diffraction. II crystallized in the orthorhombic space group Pbca, A = 17.64(2) Å, B = 14.225(10) Å, C = 24.49(2) Å.