Parameter identification in a soil with constant diffusivity

We consider infiltration into a soil that is assumed to have hydraulic conductivity of the form K = K = K_se^h and water content of the form = K – _r. Here h denotes capillary pressure head while K_s, , and _r represent soil specific parameters. These assumptions linearize the flow equation and permit a closed form solution that displays the roles of all the parameters appearing in the hydraulic function K and . We assume K_s and _r to be known. A measurement of diffusivity fixes the product of and resulting in a parameter identification problem for one parameter. We show that this parameter identification problem, in some cases, has a unique solution. We also show that, in some cases, this parameter identification problem can have multiple solutions, or no solution. In addition it is shown that solutions to the parameter identification problem can be very sensitive to small changes in the problem data.     

The value of the critical exponent for reaction-diffusion equations in cones

Let D R ^N be a cone with vertex at the origin i.e., D = (0, )x where S ^N–1 and x D if and only if x = (r, ) with r=¦x¦, . We consider the initial boundary value problem: u _t = u+u ^p in D×(0, T), u=0 on Dx(0, T) with u(x, 0)=u ₀(x) 0. Let ₁ denote the smallest Dirichlet eigenvalue for the Laplace-Beltrami operator on and let ₊ denote the positive root of (+N–2) = ₁. Let p ^* = 1 + 2/(N + ₊). If 1 < p < p ^*, no positive global solution exists. If p>p ^*, positive global solutions do exist. Extensions are given to the same problem for u _t=+¦x¦ u ^p .This research was supported in part by the Air Force Office of Scientific Research under Grant # AFOSR 88-0031 and in part by NSF Grant DMS-8 822 788. The United States Government is authorized to reproduce and distribute reprints for governmental purposes not withstanding any copyright notation therein.     

Lp-estimates for the nonlinear spatially homogeneous Boltzmann equation

This paper studies L^p-estimates for solutions of the nonlinear, spatially homogeneous Boltzmann equation. The molecular forces considered include inverse k^th-power forces with k > 5 and angular cut-off.The main conclusions are the following. Let f be the unique solution of the Boltzmann equation with f(v,t)(1 + ¦v²¦)^(s ₁ ^{+ /p)/2} L¹, when the initial value f ₀ satisfies f ₀(v) 0, f ₀(v) (1 + ¦v¦²)^(s ₁ ^{+ /p)/2} L¹, for some s₁ 2 + /p, and f ₀(v) (1 + ¦v¦²)^s/2 L^p. If s 2/p and 1 < p < , then f(v, t)(1 + ¦v¦²)^{(s s} ₁)^/2 L^p, t > 0. If s >2 and 3/(1+ ) < p < , thenf(v,t) (1 + ¦v¦²)^(s(s ₁ ^{+ 3/p))/2} L^p, t > 0. If s >2 + 2C₀/C₁ and 3/(l + ) < p < , then f(v,t)(1 + ¦v¦²)^s/2 L^p, t > 0. Here 1/p + 1/p = 1, x y = min (x, y), and C₀, C₁, 0 < 1, are positive constants related to the molecular forces under consideration; = (k – 5)/ (k – 1) for k^th-power forces.Some weaker conclusions follow when 1 < p 3/ (1 + ).In the proofs some previously known L-estimates are extended. The results for L^p, 1 < p < , are based on these L-estimates coupled with nonlinear interpolation.     

Chaos and integrability in a nonlinear wave equation

We consider the parametrized family of equations _tt ,u- _xx u-au+u ₂ ² u=O,x(0,L), with Dirichlet boundary conditions. This equation has finite-dimensional invariant manifolds of solutions. Studying the reduced equation to a four-dimensional manifold, we prove the existence of transversal homoclinic orbits to periodic solutions and of invariant sets with chaotic dynamics, provided that =2, 3, 4,.... For =1 we prove the existence of infinitely many first integrals pairwise in involution.     

Diffusion in anisotropic porous media

An experimental system was constructed in order to measure the two distinct components of the effective diffusivity tensor in transversely isotropic, unconsolidated porous media. Measurements were made for porous media consisting of glass spheres, mica particles, and disks made from mylar sheets. Both the particle geometry and the void fraction of the porous media were determined experimentally, and theoretical calculations for the two components of the effective diffusivity tensor were carried out. The comparison between theory and experiment clearly indicates that the void fraction and particle geometry are insufficient to characterize the process of diffusion in anisotropic porous media. Roman Letters A interfacial area between - and -phases for the macroscopic system, m² - A _e area of entrances and exits of the -phase for the macroscopic system, m² - A interfacial area contained within the averaging volume, m² - a characteristic length of a particle, m - b average thickness of a particle, m - c _A concentration of species A, moles/m³ - c _o reference concentration of species A, moles/m³ - c _A intrinsic phase average concentration of species A, moles/m³ - c _a c _A–c _A, spatial deviation concentration of species A, moles/m³ - C c _A/c ₀, dimensionless concentration of species A - binary molecular diffusion coefficient, m²/s - D _eff effective diffusivity tensor, m²/s - D _xx component of the effective diffusivity tensor associated with diffusion parallel to the bedding plane, m²/s - D _yy component of the effective diffusivity tensor associated with diffusion perpendicular to the bedding plane, m²/s - D _eff effective diffusivity for isotropic systems, m₂/s - f vector field that maps c _A on to c _a , m - h depth of the mixing chamber, m     

Gasdynamics of a plasma in a multiple-mirror magnetic trap with “point” mirrors

Equations are derived for the gasdynamics of a dense plasma confined by a multiple-mirror magnetic field. The limiting cases of large and small mean free paths have been analyzed earlier: ₀ and k, where is the length of an individual mirror machine, ₀ is the size of the mirror, and k is the mirror ratio. The present work is devoted to a study of the intermediate range of mean free paths ₀ k. It is shown that in this region of the parameters the process of expansion of the plasma has a diffusional nature, and the coefficients of transfer of the plasma along the magnetic field are calculated.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 14–19, November–December, 1974.The authors thank D. D. Ryutov for the statement of the problem and interest in the work.     

Existence theorem for a minimum problem with free discontinuity set

We study the variational problem Where is an open set in ⁿ ,n2gL ^q () L (), 1q<+, O<, <+ andH _n–1 is the (n–1)-dimensional Hausdorff Measure.     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

Approximate method for calculating turbulent boundary layer with positive pressure gradient

A single-parameter integral method is proposed for calculating the turbulent boundary layer with positive pressure gradient which makes it possible to calculate the friction, thermal flux, and layer thickness both ahead of the separation point and in some region behind the separation point.Notation u velocity - density - ^* displacement thickness - ^** momentum thickness - energy thickness - M Mach number - r radius - dynamic viscosity - c_p specific heat at constant pressure - Reynolds number based on initial boundary layer thickness - P Prandtl number - p₁ static pressure at point of initial interaction - p₂ static pressure at pressureplateau - p₀ stagnation pressure - T₀ stagnation temperature - I enthalpy - T_e recovery temperature - T_w ⁰ temperature factor - H form parameter - r₁ recovery coefficient Indices 0 denotes initial section of boundary layer - 1 parameters taken at edge of boundary layer - w parameters taken at the wall temperature - * parameters referred to flow on a flat plate with =0     

The secondary flow induced around a sphere in an oscillating stream of elastico-viscous liquid

The present paper is devoted to the theoretical study of the secondary flow induced around a sphere in an oscillating stream of an elastico-viscous liquid. The boundary layer equations are derived following Wang's method and solved by the method of successive approximations. The effect of elasticity of the liquid is to produce a reverse flow in the region close to the surface of the sphere and to shift the entire flow pattern towards the main flow. The resistance on the surface of the sphere and the steady secondary inflow increase with the elasticity of the liquid.Nomenclature a radius of the sphere - b ^ik contravariant components of a tensor - e contravariant components of the rate of strain tensor - F() see (47) - G total nondimensional resistance on the surface of the sphere - g _ik covariant components of the metric tensor - f, g, h secondary flow components introduced in (34) - k ₀ measure of relaxation time minus retardation time (elastico-viscous parameter) - K =k ₀ ²/V ₀ ² , nondimensional parameter characterizing the elasticity of the liquid - n measure of the ratio of the boundary layer thickness and the oscillation amplitude - N, T defined in (44) - p arbitrary isotropic pressure - p _ik covariant components of the stress tensor - p ^ik contravariant components of the stress tensor associated with the change of shape of the material - R =V ₀ a/v, the Reynolds number - S =a/V ₀, the Strouhall number - r, , spherical polar coordinates - u, v, w r, , component of velocity - t time - V(, t) potential velocity distribution around the sphere - V ₀ characteristic velocity - u, v, t, y, P nondimensional quantities defined in (15) - reciprocal of s - density - defined in (32) - defined in (42) - ₀ limiting viscosity for very small changes in deformation velocity - complex conjugate of - oscillation frequency - = ₀/, the kinematic coefficient of viscosity - , defined in (52) - (, y) stream function defined in (45) - =(NT/2n)^1/2 y - /t convective time derivative (1) _ik      

Dielectric properties of the composite system polyurethane — sodium chloride

Summary The dielectric properties of the composite system polyurethane-sodium chloride have been measured at frequencies between 10^–4 Hz and 3 · 10⁵ Hz in the temperature range from –150 °C up to +90 dgC. Three dielectric loss mechanisms have been found; they are indicated by ₁, ₂ and. The activation energy of the ₁-transition is 35 kcal/mole, that of the-transition 6.7 kcal/mole. The ₂-loss peak was only observed at frequencies of 10³ Hz and higher, forming one broad peak with the ₁-loss peak at lower frequencies. In the composite materials, the- and ₂-loss peaks measured at fixed frequencies were found at the same temperature. The ₂-loss peak, however, was shifted to a lower temperature, due to the sodium chloride filler. Comparison of experimental data of and tan with theoretical predictions concerning the dielectric properties of composite systems showed only partial agreement. The difference mainly consisted in. the temperature shift in the tan-peak of the ₁-transition.

---

Zusammenfassung Die dielektrischen Eigenschaften des Verbundssystems Kochsalz-Polyurethankautschuk wurden im Frequenzgebiet zwischen 10^–4 Hz und 3.10⁵ Hz und im Temperaturbereich von –150 °C bis +90 °C gemessen. Es wurden drei dielektrische Verlustmaxima gefunden, die mit ₁, ₂ und angedeutet werden. Die Aktivierungsenergie des ₁-Überganges beträgt 35 kcal/Mol, die des-Überganges 6.7 kcal/Mol. Das ₂-Maximum konnte nur bei Frequenzen höher als 10³Hz vom ₁-Maximum gesondert erfaßt werden. Die Lage der ₂- und-Maxima war vom Füllgrad unabhängig. Das ₁-Maximum verschiebt sich mit steigendem Füllgrad zu niedrigeren Temperaturen. Die gemessenen Werte von und tan stimmen nur teilweise mit den Aussagen einer Theorie der dielektrischen Eigenschaften von Mischkörpern überein.

     

Deformation to breaking of deep water gravity waves

The results of laboratory observations of the deformation of deep water gravity waves leading to wave breaking are reported. The specially developed visualization technique which was used is described. A preliminary analysis of the results has led to similar conclusions than recently developed theories. As a main fact, the observed wave breaking appears as the result of, first, a modulational instability which causes the local wave steepness to approach a maximum and, second, a rapidly growing instability leading directly to the breaking.List of symbols L total wave length - H total wave height - crest elevation above still water level - trough depression below still water level - wave steepness =H/L - crest steepness =/L - trough steepness =/L - F ₁ forward horizontal length from zero-upcross point (A) to wave crest - F ₂ backward horizontal length from wave crest to zero-downcross point (B) - crest front steepness =/F ₁ - crest rear steepness =/F ₂ - vertical asymmetry factor=F ₂/F ₁ (describing the wave asymmetry with respect to a vertical axis through the wave crest) - µ horizontal asymmetry factor=/H (describing the wave asymmetry with respect to a horizontal axis: SWL) - T ₀ wavemaker period - L ₀ theoretical wave length of a small amplitude sinusoïdal wave generated at T _inf0 ^sup–1 frequency - ₀ average wave height     

Flow visualization of compressible vortex structures using density gradient techniques

Mathematical results are derived for the schlieren and shadowgraph contrast variation due to the refraction of light rays passing through two-dimensional compressible vortices with viscous cores. Both standard and small-disturbance solutions are obtained. It is shown that schlieren and shadowgraph produce substantially different contrast profiles. Further, the shadowgraph contrast variation is shown to be very sensitive to the vortex velocity profile and is also dependent on the location of the peak peripheral velocity (viscous core radius). The computed results are compared to actual contrast measurements made for rotor tip vortices using the shadowgraph flow visualization technique. The work helps to clarify the relationships between the observed contrast and the structure of vortical structures in density gradient based flow visualization experiments.Nomenclature a Unobstructed height of schlieren light source in cutoff plane, m - c Blade chord, m - f Focal length of schlieren focusing mirror, m - C _T Rotor thrust coefficient, T/( ² R ⁴) - I Image screen illumination, Lm/m ² - l Distance from vortex to shadowgraph screen, m - n _b Number of blades - p Pressure,N/m ² - p Ambient pressure, N/m ² - r, , z Cylindrical coordinate system - r _c Vortex core radius, m - Non-dimensional radial coordinate, (r/r _c ) - R Rotor radius, m - Tangential velocity, m/s - Specific heat ratio of air - Circulation (strength of vortex), m ²/s - Non-dimensional quantity, ² 8²p r _c ² - Refractive index of fluid medium - ₀ Refractive index of fluid medium at reference conditions - Gladstone-Dale constant, m ³/kg - Density, kg/m ³ - Density at ambient conditions, kg/m ³ - Non-dimensional density, (/ ) - Rotor solidity, (n _b c/ R) - Rotor rotational frequency, rad/s     

Calculation of the pressure on the side surface of bodies consisting of a spherical segment joined to an inverted cone in a supersonic stream

The results of investigations of inviscid flow over inverted cones with nose consisting of a spherical segment were published for the first time in Soviet literature in [1–4]. In the present paper, a numerical solution to this problem is obtained using the improved algorithms of [5, 6], which have proved themselves well in problems of exterior flow over surfaces with positive angles of inclination to the oncoming flow. It is shown that the Mach number 2 M , equilibrium and nonequilibrium physicochemical transformations in air (H = 60 km, V = 7.4 km/sec, R₀ = 1 m), and the angle of attack 0 40° influence the investigated pressure distributions. A comparison of the results of the calculations with drainage experiments for M = 6, = 0-25° confirms the extended region of applicability of the developed numerical methods. Also proposed is a simple correlation of the dependence on the Mach number in the range 1.5 M of the shape of the shock wave near a sphere in a stream of ideal gas with adiabatic exponent = 1.4.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 178–183, January–February, 1981.     

Method of mass-average quantities for the boundary layer in an outer flow with transverse nonuniformity

An engineering method is proposed for calculating the friction and heat transfer through a boundary layer in which a nonuniform distribution of the velocity, total enthalpy, and static enthalpy is specified across the streamlines at the initial section x₀. Such problems arise in the vortical interaction of the boundary layer with the high-entropy layer on slender blunt bodies, with sudden change of the boundary conditions for an already developed boundary layer (temperature jump, surface discontinuity), and in wake flow past a body, etc.Notation x, y longitudinal and transverse coordinates - u,, H, h gas velocity, stream function, total and static enthalpy - p,,, pressure, density, viscosity, Prandtl number - , q friction and thermal flux at the body surface - r(x), (x) body surface shape and boundary layer thickness - V, M freestream velocity and Mach number - u⁽⁰⁾(x₀,), H⁽⁰⁾(x₀,), h⁽⁰⁾(x₀,) parameter distributions at initial section - u⁽⁰⁾(x,), h⁽⁰⁾(x,), h⁽⁰⁾(x,) profiles of quantities in outer flow in absence of friction and heat transfer at the surface of the body The indices v=0, 1 relate to plane and axisymmetric flows - , w, b, relate to quantities at the outer edge of the inner boundary layer, at the body surface in viscid and nonviscous flows, and in the freestream, respectively. The author wishes to thank O. I. Gubanov, V. A. Kaprov, I. N. Murzinov, and A. N, Rumynskii for discussions and assistance in this study.     

Similar solutions and the asymptotics of filtration equations

In this paper we consider the asymptotic behavior of solutions of the quasilinear equation of filtration as t. We prove that similar solutions of the equation u _t = (u )_xx asymptotically represent solutions of the Cauchy problem for the full equation u _t = [(u)]_xx if (u) is close to u for small u.     

Two-phase flow in heterogeneous porous media II: Numerical experiments for flow perpendicular to a stratified system

In this work, we make use of numerical experiments to explore our original theoretical analysis of two-phase flow in heterogeneous porous media (Quintard and Whitaker, 1988). The calculations were carried out with a two-region model of a stratified system, and the parameters were chosen be consistent with practical problems associated with groundwater flows and petroleum reservoir recovery processes. The comparison between theory (the large-scaled averaged equations) and experiment (numerical solution of the local volume averaged equations) has allowed us to identify conditions for which the quasi-static theory is acceptable and conditions for which a dynamic theory must be used. Byquasi-static we mean the following: (1) The local capillary pressure,everywhere in the averaging volume, can be set equal to the large-scale capillary pressure evaluated at the centroid of the averaging volume and (2) the large-scale capillary pressure is given by the difference between the large-scale pressures in the two immiscible phases, and is therefore independent of gravitational effects, flow effects and transient effects. Bydynamic, we simply mean a significant departure from the quasi-static condition, thus dynamic effects can be associated with gravitational effects, flow effects and transient effects. To be more precise about the quasi-static condition we need to refer to the relation between the local capillary pressure and the large-scale capillary pressure derived in Part I (Quintard and Whitaker, 1990). Herep _c ¦_y represents the local capillary pressure evaluated at a positiony relative to the centroid of the large-scale averaging volume, and {p _c }¦_x represents the large-scale capillary pressure evaluated at the centroid.In addition to{p _c } ^c being evaluated at the centroid, all averaged terms on the right-hand side of Equation (1) are evaluated at the centroid. We can now write the equations describing the quasi-static condition as , , This means that the fluids within an averaging volume are distributed according to the capillary pressure-saturation relationwith the capillary pressure held constant. It also means that the large-scale capillary pressure is devoid of any dynamic effects. Both of these conditions represent approximations (see Section 6 in Part I) and one of our main objectives in this paper is to learn something about the efficacy of these approximations. As a secondary objective we want to explore the influence of dynamic effects in terms of our original theory. In that development only the first four terms on the right hand side of Equation (1) appeared in the representation for the local capillary pressure. However, those terms will provide an indication of the influence of dynamic effects on the large-scale capillary pressure and the large-scale permeability tensor, and that information provides valuable guidance for future studies based on the theory presented in Part I.Roman Letters A scalar that maps {}*/t onto - A scalar that maps {}*/t onto - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - a vector that maps ({}*/t) onto , m - a vector that maps ({}*/t) onto , m - b vector that maps ({p}– g) onto , m - b vector that maps ({p}– g) onto , m - B second order tensor that maps ({p}– g) onto , m² - B second order tensor that maps ({p}– g) onto , m² - c vector that maps ({}*/t) onto , m - c vector that maps ({}*/t) onto , m - C second order tensor that maps ({}*/t) onto , m² - C second order tensor that maps ({}*/t) onto . m² - D third order tensor that maps ( ) onto , m - D third order tensor that maps ( ) onto , m - D second order tensor that maps ( ) onto , m² - D second order tensor that maps ( ) onto , m² - E third order tensor that maps () onto , m - E third order tensor that maps () onto , m - E second order tensor that maps () onto - E second order tensor that maps () onto - p _c =(), capillary pressure relationship in the-region - p _c =(), capillary pressure relationship in the-region - g gravitational vector, m/s² - largest of either or - - - i unit base vector in thex-direction - I unit tensor - K local volume-averaged-phase permeability, m² - K local volume-averaged-phase permeability in the-region, m² - K local volume-averaged-phase permeability in the-region, m² - {K } large-scale intrinsic phase average permeability for the-phase, m² - K –{K }, large-scale spatial deviation for the-phase permeability, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K ^* large-scale permeability for the-phase, m² - L characteristic length associated with local volume-averaged quantities, m - characteristic length associated with large-scale averaged quantities, m - I _i i = 1, 2, 3, lattice vectors for a unit cell, m - l characteristic length associated with the-region, m - ; characteristic length associated with the-region, m - l _H characteristic length associated with a local heterogeneity, m - - n unit normal vector pointing from the-region toward the-region (n =–n ) - n unit normal vector pointing from the-region toward the-region (n =–n ) - p pressure in the-phase, N/m² - p local volume-averaged intrinsic phase average pressure in the-phase, N/m² - {p } large-scale intrinsic phase average pressure in the capillary region of the-phase, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - P _c p –{p }, capillary pressure, N/m² - {p_c}^c large-scale capillary pressure, N/m² - r ₀ radius of the local averaging volume, m - R ₀ radius of the large-scale averaging volume, m - r position vector, m - , m - S /, local volume-averaged saturation for the-phase - S ^* {}*{}*, large-scale average saturation for the-phaset time, s - t time, s - u , m - U , m² - v -phase velocity vector, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - {v } large-scale intrinsic phase average velocity for the-phase in the capillary region of the-phase, m/s - {v } large-scale phase average velocity for the-phase in the capillary region of the-phase, m/s - v –{v }, large-scale spatial deviation for the-phase velocity, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - V local averaging volume, m³ - V volume of the-phase in, m³ - V large-scale averaging volume, m³ - V capillary region for the-phase within, m³ - V capillary region for the-phase within, m³ - V _c intersection of m³ - V volume of the-region within, m³ - V volume of the-region within, m³ - V () capillary region for the-phase within the-region, m³ - V () capillary region for the-phase within the-region, m³ - V () , region in which the-phase is trapped at the irreducible saturation, m³ - y position vector relative to the centroid of the large-scale averaging volume, m Greek Letters local volume-averaged porosity - local volume-averaged volume fraction for the-phase - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region (This is directly related to the irreducible saturation.) - {} large-scale intrinsic phase average volume fraction for the-phase - {} large-scale phase average volume fraction for the-phase - {}* large-scale spatial average volume fraction for the-phase - –{}, large-scale spatial deviation for the-phase volume fraction - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - a generic local volume-averaged quantity associated with the-phase - mass density of the-phase, kg/m³ - mass density of the-phase, kg/m³ - viscosity of the-phase, N s/m² - viscosity of the-phase, N s/m² - interfacial tension of the - phase system, N/m - , N/m - , volume fraction of the-phase capillary (active) region - , volume fraction of the-phase capillary (active) region - , volume fraction of the-region ( + =1) - , volume fraction of the-region ( + =1) - {p }– g, N/m³ - {p }– g, N/m³     

Control of low-speed turbulent separated flow using jet vortex generators

A parametric study has been performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulent flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and jet location (distance from the separation region in the free-stream direction). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed).Nomenclature C _p pressure coefficient, 2(P-P_)/V ² - C _Q total flow coefficient, Q/ v - D ₀ jet orifice diameter - Q total volumetric flow rate - R Reynolds number based on momentum thickness - u fluctuating velocity component in the free-stream (x) direction - V free-stream flow speed - VR ratio of jet speed to free-stream flow speed - x coordinate along the wall in the free-stream direction - jet inclination angle (angle between the jet axis and the wall) - jet azimuthal angle (angle between the jet axis and the free-stream direction in a horizontal plane) - boundary-layer thickness - momentum thickness - lateral distance between jet orifices A version of this paper was presented at the 12th Symposium on Turbulence, University of Missouri-Rolla, 24–26 Sept. 1990     

Nonlinear rheological behavior of a concentrated spherical silica suspension

Linear and nonlinear viscoelastic properties were examined for a 50 wt% suspension of spherical silica particles (with radius of 40 nm) in a viscous medium, 2.27/1 (wt/wt) ethylene glycol/glycerol mixture. The effective volume fraction of the particles evaluated from zero-shear viscosities of the suspension and medium was 0.53. At a quiescent state the particles had a liquid-like, isotropic spatial distribution in the medium. Dynamic moduli G^* obtained for small oscillatory strain (in the linear viscoelastic regime) exhibited a relaxation process that reflected the equilibrium Brownian motion of those particles. In the stress relaxation experiments, the linear relaxation modulus G(t) was obtained for small step strain (0.2) while the nonlinear relaxation modulus G(t, ) characterizing strong stress damping behavior was obtained for large (>0.2). G(t, ) obeyed the time-strain separability at long time scales, and the damping function h() (–G(t, )/G(t)) was determined. Steady flow measurements revealed shear-thinning of the steady state viscosity () for small shear rates (< ^–1; = linear viscoelastic relaxation time) and shear-thickening for larger (>^–1). Corresponding changes were observed also for the viscosity growth and decay functions on start up and cessation of flow, + (t, ) and _– (t, ). In the shear-thinning regime, the and dependence of ₊(t,) and _–(t,) as well as the dependence of () were well described by a BKZ-type constitutive equation using the G(t) and h() data. On the other hand, this equation completely failed in describing the behavior in the shear-thickening regime. These applicabilities of the BKZ equation were utilized to discuss the shearthinning and shear-thickening mechanisms in relation to shear effects on the structure (spatial distribution) and motion of the suspended particles.Dedicated to the memory of Prof. Dale S. Parson     

Heat transfer and equilibrium temperature of a sphere in a supersonic rarefied gas flow

Some results are presented of experimental studies of the equilibrium temperature and heat transfer of a sphere in a supersonic rarefied air flow.The notations D sphere diameter - u, , T,,l, freestream parameters (u is velocity, density, T the thermodynamic temperature,l the molecular mean free path, the viscosity coefficient, the thermal conductivity) - T₀ temperature of the adiabatically stagnated stream - T_e mean equilibrium temperature of the sphere - T_w surface temperature of the cold sphere (T_we) - mean heat transfer coefficient - _e air thermal conductivity at the temperature T_e - P Prandtl number - M Mach number