Adsorption of Cu2+ from aqueous solution onto iron oxide coated eggshell powder: Evaluation of equilibrium,isotherms, kinetics,and regeneration capacity

This study explored the adsorption behavior of Cu²⁺ onto iron oxide coated eggshell powder (IOESP) from aqueous solution. The effect of various operational parameters such as pH, contact time, initial adsorbate concentration, surfactant, and temperature on adsorption of Cu²⁺ ions was investigated using batch adsorption experiments. The optimum pH for Cu²⁺ adsorption was found to be 6.0. Kinetics of adsorption was found to follow the pseudo-second-order rate equation. The suitability of Langmuir and Freundlich adsorption models to the equilibrium data was investigated. The adsorption was well described by the Freundlich isotherm model indicating the presence of heterogeneous sites for Cu²⁺ adsorption. The adsorption of Cu²⁺ was increased in the presence of anionic surfactant (SDS) while cationic surfactant (CTAB) shows no significant change in adsorption capacity. Thermodynamic parameters showed that the adsorption of Cu²⁺ onto IOESP was feasible, spontaneous, and exothermic. Regeneration studies were performed using HCl, HCOOH, EDTA, and NaOH as eluting agent for Cu²⁺ desorption from saturated IOESP and the maximum regeneration was observed with HCl.     

Determination of adsorption heats of individual adsorption complex by combination of microcalorimetry and FTIR spectroscopy

Adsorption of CO as a probe molecule on K-FER zeolites differing in Si/Al ratio was investigated. Successful determination of adsorption heats of individual adsorption complexes formed upon adsorption of CO molecules on K-FER zeolites at 300 K by combination of IR spectroscopy with adsorption microcalorimetry is reported. Adsorption heat of bridged carbonyl complexes, where CO molecule interacts with two nearby extraframework K⁺ cations, was experimentally determined for the first time. It was found that bridged complexes on dual cationic sites exhibit adsorption heat of 34.8 kJ mol^?1, whereas monodentate carbonyls on single isolated K⁺ cation exhibit adsorption heat of only 26.2 kJ mol^?1 and adsorption heat of isocarbonyls was 21.5 kJ mol^?1.     

Facile one-pot synthesis of nano-zinc hydroxide by electro-dissolution of zinc as a sacrificial anode and the application for adsorption of Th<Superscript>4+</Superscript>, U<Superscript>4+</Superscript>, and Ce<Superscript>4+</Superscript> from aqueous solution

Facilely synthesized zinc hydroxide nanoparticles by electro-dissolution of zinc sacrificial anodes were investigated for the adsorption of thorium (Th⁴⁺), uranium (U⁴⁺) and cerium (Ce⁴⁺) from aqueous solution. Various operating parameters such as effect of pH, current density, temperature, electrode configuration, and electrode spacing on the adsorption efficiency of Th⁴⁺, U⁴⁺ and Ce⁴⁺ were studied. The results showed that the maximum removal efficiency was achieved for Th⁴⁺, U⁴⁺ and Ce⁴⁺ with zinc as anode and stainless steel as cathode at a current density of 0.2 A/dm² and pH of 7.0. First- and second-order rate equations were applied to study the adsorption kinetics. The adsorption process follows second order kinetics model with good correlation. The Langmuir, Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The experimental adsorption data were fitted to the Langmuir adsorption model. Thermodynamic parameters such as free energy (ΔG°), enthalpy (ΔH°), and entropy changes (ΔS°) for the adsorption of Th⁴⁺, U⁴⁺ and Ce⁴⁺ were computed to predict the nature of adsorption process. Temperature studies showed that the adsorption was endothermic and spontaneous in nature.     

An evaluation of coal fly ash as an adsorbent for the removal of methylene blue from aqueous solutions: kinetic and thermodynamic studies

Abstract

In this study the effect of the dose and particle size of the adsorbent, initial dye concentration, initial pH, contact time and temperature were investigated for the removal of by means of fly ash (FA) methylene blue (MB) from an aqueous solution. The FA dose was found to be 2.0?g and the under 270 mesh sized particles were found to be effective particles for adsorption. The adsorption process reached its maximum value at 0.5?mg/L dye concentration and attained equilibrium within 10?minutes. The adsorption isotherm was found to follow the Langmuir model. The estimated adsorption free energy (ΔG^o), enthalpy change (ΔH^o), and entropy change (ΔS^o) for the adsorption process were ?37.77?kJ mol^?1, ?13.44?kJ mol^?1 and 122 J mol^?1 K^?1 respectively at 298 K. The maximum adsorption capacity is 0,12?mg g^?1 at 298 K and 0,07?mg g^?1 at 398 K. The adsorption process was exothermic, feasible and spontaneous. The positive value of ΔS^o shows the affinity of FA for MB while the low value of ΔG^o suggests a physical adsorption process.     

Study on the first-step adsorption of dodecyltrimethylammonium bromide solutions on silica wafer surfaces by ultramicroelectrode voltammetry

Ultramicroelectrode (UME) voltammetry is introduced to study the first-step adsorption of dodecyltrimethylammonium bromide (DTAB) solutions on silica wafer surfaces. This method is based on the exchange reaction of the surfactant molecules with hydrogen ions (H⁺) on the surfaces. In the first-step adsorption process, when a surfactant molecule is adsorbed to the hydroxylated silica surfaces, a H⁺ will be displaced. Therefore, H⁺ concentration will change with the adsorption process until it reaches saturation of the first-step adsorption. The molar adsorption amount of DTAB (mol m⁻²) before critical micelle concentration (CMC) can be calculated from the change in H⁺ concentration. The following adsorption process at higher surfactant concentrations is dominated by hydrophobic forces. Consequently, the H⁺ concentrations do not change with the adsorption process any more, which makes the measurement uninfluenced by the following hydrophobic adsorption process. The adsorption isotherms of DTAB on silica wafer surfaces under different pH are measured with this method. It is found that all the adsorption isotherms exhibit asymptote (L) shape and the equilibrium molar adsorption amounts increase with increasing the pH of the solution. These results indicate that H⁺ not only change the surface charge but also compete with surfactant for adsorption at higher proton concentrations.     

Development of novel graphene-like layered hexagonal boron nitride for adsorptive removal of antibiotic gatifloxacin from aqueous solution

Graphene-like layered hexagonal boron nitride (g-BN) was prepared and characterized. The performance of using g-BN as an adsorbent for removal of fluoroquinolone antibiotic gatifloxacin (GTF) from aqueous solution was evaluated. g-BN showed an excellent adsorption capability with notable GTF adsorption ratio of more than 90%. Data of equilibrium adsorption of GTF onto g-BN at different temperatures were represented by Langmuir, Freundlich and Tempkin isotherm models, and Langmuir exhibited the best fitting with the maximum adsorption capacity of 88.5 mg·g^?1 at 288 K. GTF adsorption was insignificantly affected by solution pH. Competitive role of Na⁺ and Ca²⁺ in the solution inhibited the adsorption of GTF and decreased the adsorption capacity a bit. The adsorption process was spontaneous and exothermic. The adsorption was probably governed by π–π interaction between GTF and g-BN, and electrostatic interaction may also exist in the adsorption process.     

Material Balance Study of Adsorption of Organic Compounds

It was shown that the structure of a surface complex and the nature of an adsorption bond can be determined from the material balance of adsorption of H⁺and OH^–ions and organic compound. A calculation procedure was considered using adsorption of benzoic acid on silica gel and zirconia as examples. It was established that adsorption of benzoic acid on silica gel was accompanied by the release of H⁺ions resulted from the formation of surface hydrogen bonds, whereas adsorption on zirconia, by the substitution of OH^–ions in coordination sphere of Zr(IV).     

Adsorption kinetics and equilibrium modeling of cesium on copper ferrocyanide

The copper ferrocyanide (CuFC) prepared in this study was characterized using X-ray diffraction and scanning election microscopy. The distribution of particle sizes of the CuFC suspension was determined. The adsorption kinetics data were evaluated for an intraparticle diffusion model, a pseudo-first order model and a pseudo-second order model at temperatures of 288, 298 and 308 K, respectively. It was found that the adsorption process of Cs⁺ on CuFC was best described by a pseudo-second order kinetic model, with a correlation coefficient (R ²) equal to 1.000, and the adsorption rate constant increased with increasing temperature. This result indicated that chemisorptions took place during the adsorption process. The adsorption equilibrium data fit well to the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The mean adsorption energy (E) between 11 and 13 kJ/mol at different temperatures indicated that ion exchange was the main mechanism during the adsorption process. Thermodynamic parameters were also evaluated during the adsorption. The values of the standard Gibbs free energy change (ΔG ^o) and standard enthalpy change (ΔH ^o) suggested that the adsorption was a spontaneous and endothermic process. The distribution coefficient (K _d) was more than 2.94 × 10⁶ mL/g when the pH of solution was between 2.6 and 10.9, and the initial Cs⁺ concentration was 100 μg/L. The existence of K⁺ and Na⁺ did not affect the adsorption of Cs⁺ on CuFC when the concentration of K⁺ and Na⁺ in the solution was below 20 and 1,000 mg/L, respectively.     

Preparation and adsorption properties of crosslinked polystyrene-supported low-generation diethanolamine-typed dendrimer for metal ions

Two novel chelating resins, polystyrene supported G1.0 diethanolamine-typed dendrimer (PS-DEA) and G2.0 diethanolamine-typed dendrimer (PS-(DEA)₂), were prepared by anchoring low-generations diethanolamine-typed dendrimer into crosslinked polystyrene in this paper. Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and elemental analysis were employed to character their structures. The results of adsorption for metal ions showed that the resins had good adsorption capacities for Cu²⁺, Ag⁺ and Hg²⁺, especially PS-DEA for Cu²⁺. The adsorption kinetics and adsorption isotherms of PS-DEA for Cu²⁺ and PS-(DEA)₂ for Hg²⁺ were studied. The results showed that the adsorption kinetics of the two resins can be modeled by pseudo second-order rate equation wonderfully and Langmuir and Freundlich equations could well interpret the adsorption of PS-(DEA)₂ for Hg²⁺ and PS-DEA for Cu²⁺, respectively. The adsorption mechanism of the resins for Cu²⁺ was confirmed by X-ray photoelectron spectroscopy (XPS).     

Production of low sulfur diesel fuel via adsorption: an equilibrium and kinetic study on the adsorption of dibenzothiophene onto NaY zeolite

The adsorption of dibenzothiophene (DBT) in hexadecane onto NaY zeolite has been studied by performing equilibrium and kinetic adsorption experiments. The influence of several variables such as contact time, initial concentration of DBT and temperature on the adsorption has been investigated. The results show that the isothermal equilibrium can be represented by the Langmuir equation. The maximum adsorption capacity at different temperatures and the corresponding Langmuir constant (K _L ) have been deduced. The thermodynamic parameters (ΔG ⁰,ΔH ⁰,ΔS ⁰) for the adsorption of DBT have also been calculated from the temperature dependence of K _L using the van’t Hoff equation. The value of ΔH ⁰,ΔS ⁰ are found to be −30.3 kJ mol⁻¹ and −33.2 J mol⁻¹ K⁻¹ respectively. The adsorption is spontaneous and exothermic. The kinetics for the adsorption process can be described by either the Langmuir model or a pseudo-second-order model. It is found that the adsorption capacity and the initial rate of adsorption are dependent on contact time, temperature and the initial DBT concentration. The low apparent activation energy (12.4 kJ mol⁻¹) indicates that adsorption has a low potential barrier suggesting a mass transfer controlled process. In addition, the competitive adsorption between DBT, naphthalene and quinoline on NaY was also investigated.     

Study on complexation adsorption behavior of dibenzo-18-crown-6 immobilized on CPVA microspheres for metal ions

Dibenzo-18-crown-6 (DBC) was immobilized on crosslinked polyvinyl alcohol (CPVA) microspheres, resulting in polymer-supported crown ether DBC–CPVA. The complexation adsorption behaviors of DBC–CPVA microspheres towards diverse metal ions were investigated. The experimental results show that among alkali metal ions, the complexation adsorption ability of DBC–CPVA for K⁺ ion is the strongest, and crown ether-metal complex in 1:1 ratio is formed, exhibiting a high adsorption capacity. The adsorption capacities of alkali metal ions on DBC–CPVA are in the order: K⁺ ? Na⁺ > LI⁺ > Rb⁺ > Cs⁺. Among several divalent metal ions, DBC–CPVA exhibits stronger adsorption ability towards Zn²⁺ and Co²⁺ ions, and a “sandwich”-type complex is formed probably in a molar ratio of 2:1 between the immobilized DBC and Zn²⁺ ion as well as between the immobilized DBC and Co²⁺ ion. The adsorption capacities of the several divalent metal ions on DBC–CPVA are in the order: Zn²⁺ > Co²⁺ ? Cd²⁺ > Cu²⁺ > Ni²⁺ > Pb²⁺. The complexation adsorption is exothermic physical physisorption process, and raising temperature leads to the decrease of the adsorption capacity. At the same time, the entropy during the complexation adsorption decreases, so the adsorption process is driven by the decrease of enthalpy.     

Surface modification of malonic acid‐catalyzed carbon xerogels and their high performance for adsorption of Cu (II) ions

The preparation of malonic acid‐catalyzed carbon xerogels modified with nitric acid and their high performance for adsorption of Cu²⁺ were investigated. The treated and untreated carbon xerogels (nitrogen‐doped carbon xerogel and carbon xerogel) are mainly microporous with high surface areas (1150.18 and 1201.46 m² g^?1) based on the analysis of N₂ adsorption isotherm. Fourier transform infrared spectroscopy study demonstrates that modification process generates a number of functional groups such as carboxyl, carbonyl, and nitrate groups. X‐ray photoelectron spectra analysis shows an increase in the content of O and N after oxidation. The adsorption performance for Cu²⁺ using different process parameters like initial concentration, contact time, and temperature was investigated. The result indicates that the pseudo‐second order correlates with the experimental data, and the activation energy of Cu²⁺ adsorption onto nitrogen‐doped carbon xerogel and carbon xerogel is calculated as 15.62 kJ mol^?1 and 2.79 kJ mol^?1, respectively, indicating the coexistence of chemisorption and ion‐exchange. Langmuir and Freundlich isotherms were used to describe the adsorption behavior of Cu²⁺. The adsorption of Cu²⁺ by carbon xerogels modified with nitric acid was fast and had noticeable adsorption capacity, with a higher adsorption capacity than the original carbon xerogels (299.41 vs 260.42 mg g^?1). Copyright © 2013 John Wiley & Sons, Ltd.     

Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution

Kapok fiber, a natural hollow fiber with thin shell and large cavity, has rarely been used as adsorbent for heavy metal ions. In this paper, kapok fibers were modified with diethylenetriamine pentaacetic acid (DTPA) after hydrophilicity treatment. The adsorption behavior of the resultant kapok-DTPA influenced by pH, adsorption time and initial concentration of metal ion was investigated. The results demonstrate that adsorption equilibrium was reached within 2 min for Pb²⁺ and Cd²⁺. Adsorption kinetics showed that the adsorption rate was well fitted by pseudo-second-order rate model. The adsorption isotherms were studied, and the best fit was obtained in the Langmuir model. The maximum adsorption capacities of kapok-DTPA were 310.6 mg g^?1 for Pb²⁺, 163.7 mg g^?1 for Cd²⁺, 101.0 mg g^?1 for Cu²⁺, respectively. After eight desorption and re-adsorption loops, the lost adsorption capacities for Pb²⁺ and Cu²⁺ were less than 10 %. Because of the large specific area derived from the hollow fiber structure, kapok-DTPA exhibited much better adsorption capacity compared with many other reported adsorbents based on natural materials.     

Thermal Study of Surfactant and Anion Adsorption on Clinoptilolite

The mechanism of surfactant adsorption on various forms of clinoptilolite was studied by DTA, TG and DTG analyses. The examined series of surfactant modified clinoptilolite (SMC) was previously prepared by the adsorption of the surface-active oleylamine on Ca²⁺, Na⁺, H⁺ and mechanochemically treated forms of clinoptilolite. The oleylamine was most strongly adsorbed on H⁺-forms of clinoptilolite due to the largest number and strength of adsorption sites. The surfactant adsorption mechanism on H⁺-form of clinoptilolite was studied by recording the series of variously surfactant-loaded samples. The products of sulphate, dihydrogenphosphate and hydrogenchromate adsorption on SMC were analyzed by DTA, TG and DTG in order to investigate the mechanism of anion adsorption.This revised version was published online in November 2005 with corrections to the Cover Date.     

Adsorption of fluoride on synthetic siderite from aqueous solution

The study has investigated the feasibility of using synthetic siderite for F⁻ removal from aqueous solution. Batch experiments were performed to test effects of adsorbent dosage, contact time, initial F⁻ concentration, temperature, solution pH, and coexisting anions on F⁻ removal. Results show that the kinetic rate of F⁻ adsorption was high in the first 2 h, and thereafter significantly decreased. The kinetic data was better fitted to the pseudo-second order kinetic model than the pseudo-first order kinetic model. In comparison with Langmuir isotherm, both Freundlich and Redlich-Peterson isotherms better described the adsorption process, which indicates that the multilayer adsorption should be involved in the process of F⁻ removal. Thermodynamic study manifests that F⁻ adsorption on synthetic siderite was spontaneous and exothermic in nature. The synthetic siderite had high adsorption capacity for F⁻ removal, which was up to 1.775 mg/g in the batch with an adsorbent dosage of 5 g/L and an initial F⁻ concentration of 20 mg/L at 25 °C. The adsorption was relatively independent on solution pH between 4 and 9. The presence of Cl⁻ and NO₃⁻ had less impact on F⁻ adsorption, while PO₄³⁻ significantly affected F⁻ removal from aqueous solution. Results of X-ray diffraction (XRD) and scanning electron microscopy (SEM) suggest that the high adsorption capacity possibly arose from both coprecipitation of ferric hydroxide with F⁻ and adsorption of F⁻ on the fresh goethite.     

Study on the controllable synthesis of SH-MCM-41 mesoporous materials and their adsorption properties of the La3+, Gd3+ and Yb3+

Sulfhydryl MCM-41 (SH-MCM-41) mesoporous materials were prepared via a hydrothermal method, and -SH was successfully imported by a post-grafting method. The structure and surface properties of the materials were characterized using Fourier Transform infrared spectroscopy, X-ray diffraction and Transmission Electron Microscopy analysis. The low concentrations of La³⁺, Gd³⁺ and Yb³⁺ adsorption on the material were investigated. This paper discusses the effects of system factors, such as pH and the solid-liquid ratio, on the performance of the adsorption process. The adsorption thermodynamics and kinetics were also explored. Experimental results indicated that the materials were in good order and had high specific surface area (956 m²/g) with an average pore diameter of 2.1 nm; the mercapto groups were successfully grafted onto a molecular sieve, and the best grafted amount was 1.46 × 10^?3 mol/g. The materials showed preferable adsorption of La³⁺, Gd³⁺ and Yb³⁺ with maximum adsorption capacities of 560.56 mg/g, 467.60 mg/g and 540.68 mg/g, respectively. The adsorption process can be described by the Freundlich isotherm model, and the adsorption data fits pseudo-second-order kinetics. After repeating the elution-regeneration cycle four times, the adsorption capacity of rare earth ions was mostly maintained, indicating that the adsorbent can be regenerated well and recycled to save costs. It has potential in practical application.     

Chitosan-g-poly(acrylic acid) hydrogel with crosslinked polymeric networks for Ni recovery

In this study, chitosan-g-poly(acrylic acid) (CTS-g-PAA) hydrogel with crosslinked polymeric networks was prepared from an aqueous dispersion polymerization and then used as the adsorbent to recover a valuable metal, Ni²⁺. The adsorption capacity of CTS-g-PAA for Ni²⁺ was evaluated and the adsorption kinetics was investigated using Voigt-based model and pseudo-second-order model. In addition, the effects of pH values and coexisting heavy metal ions such as Cu²⁺ and Pb²⁺ on the adsorption capacity were studied. The results indicate that the as-prepared adsorbent has faster adsorption rate and higher adsorption capacity for Ni²⁺ recovery, with the maximum adsorption capacity of 161.80 mg g⁻¹. In a wide pH range of 3–7, the adsorption capacity keeps almost the same, and even under competitive conditions, the adsorption capacity of CTS-g-PAA for Ni²⁺ is observed to be as high as 54.47 mg g⁻¹. Finally, the adsorption performance of CTS-g-PAA for Ni²⁺ in real water sample and the reusability of the as-prepared adsorbent were evaluated, and also the controlled adsorption mechanism was proposed.     

Adsorption of UO2 2+, Tl+, Pb2+, Ra2+ and Ac3+ onto polyacrylamide-bentonite composite

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerization in a suspension of bentonite (B), the composite was then modified by phytic acid (PAA-B-Phy). The parameters related to adsorption of UO₂ ²⁺ in absence and presence of 0.01M CaCl₂ and of natural radionuclides (Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ in a leaching solution) onto PAA-B and PAA-B-Phy, and thermodynamics of the adsorption were investigated. Adsorption isotherms were of L and H types for the adsorption of UO₂ ²⁺ onto PAA-B and PAA-B-Phy, whilst for Tl⁺, Pb²⁺, Ra²⁺ and Ac³⁺ they were of C type for both adsorbents. Langmuir equilibrium constants for the adsorption of all studied ions onto PAA-B-Phy were significantly higher than those found for PAA-B. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy. The composite of PAA-B and its modification by Phy have been used for the first time in this study. It is concluded that the composites can be practically used for adsorption and applied as adsorbent of radionuclides.     

Studies on the adsorption of peptides of glycine/alanine on montmorillonite clay with or without co-ordinated divalent cations

The adsorption of simple peptides of glycine/alanine from their aqueous solutions onto montmorillonite, Ca²⁺ and Mg²⁺ exchanged montmorillonite clay studied UV spectrophotometrically at constant pH 7.02 and temperature 23 °C. The percent binding of Gly², Gly³, Gly⁴ and Gly-ala is calculated in terms of their optical density. The adsorption parameters, i.e. X_m and K_L have been calculated from Langmuir adsorption isotherm. Similar adsorption behaviour was observed with or without divalent cation exchanged adsorbent, but the percent binding and monolayer capacity appear to depend on the molecular weight, i.e. number of aliphatic carbon atoms of the adsorbates. The adsorption was significantly affected by the concentration of peptide, pH and temperature of the system. Equilibrium constant (K) and the free energies of adsorption (−ΔG) were determined from the isotherm measured under static conditions. Tetra glycine (Gly⁴) has positive −ΔG and K>1 showing greater adsorptibility, whereas for other peptides, −ΔG values were negative and K<1, thus showing very weak adsorption. A linear dependence of −ΔG on the number of aliphatic carbon atoms (n_c) from Gly² to Gly⁴ in adsorbate molecule was found. Thermodynamic data strongly support the quantitative data obtained from Langmuir adsorption isotherm. Ca²⁺ montmorillonite exhibited relatively better adsorption as compared to Mg²⁺ exchanged form or montmorillonite without Ca²⁺ or Mg²⁺. Results have shown that clay minerals might have played a significant role in prebiotic formation of proteins via adsorption of simple bio-oligomers on their surface.     

Entropy of adsorption of carbon monoxide on energetically heterogeneous surfaces

Standard entropies of adsorption (Δs ⁰) of CO on different materials (Cu catalysts, Au catalysts, ZnO and to TiO₂) are obtained from static adsorption microcalorimetry, adsorption isobars and temperature-programmed desorption, based on the thermodynamics of adsorption on energetically heterogeneous surfaces. Vibrational entropies of the surfaces s _vib^α are normally between the rotational and the standard translational entropy of CO in gas phase, and decrease with increasing adsorption energy, which agrees with the explanation of statistical thermodynamics. Δs ⁰ reflects both the mobility of adsorbates and the specific adsorbate-adsorbent interaction. Limits for reasonable values of the entropy of adsorption are proposed.