电聚吡咯固定化酪氨酸酶电极的制备及性能

在应用恒电位法电化学聚合吡咯的同时 ,将酪氨酸酶固定在导电聚吡咯膜内 ,制成一种灵敏、稳定的酪氨酸电极 .讨论了溶液 pH值和聚合电位对酶固定化的影响 ,对酶分子嵌入吡咯膜前后的SEM图和CV曲线进行了分析、比较 .该电极对甲苯酚响应的线性范围为 5 .0× 10 -8～ 1.0× 10 -6mol/L ,最适 pH值为 6 .6 ,酶反应表观上遵循Michaelis_Menten动力学 ,表观米氏常数为 2 .2× 10 -5mol/L .     

造纸法烟草薄片浆液、白水及成品中铝的测定

采用氟离子选择电极法测定造纸法烟草薄片浆液、白水及成品中的铝。研究了影响测定结果的主要因素,确定了适宜的测定条件。结果表明:当F-的初始浓度为1×10-3mol/L时,电极电位(E)与铝量(ρ)线性关系良好(R=0.9996),线性范围为2.0~10.0μg/mL,回收率为84.71%~88.42%,RSD为0.57%~3.1%。该法通过控制溶液中氟离子浓度从而实现铝的测定,方法适合于样品中铝的分析。     

非平衡态-恒电位配位滴定法同时测定铁和铝

以氟离子溶液作滴定剂，氟离子选择性电极作指示电极，在氟-铝反应没有达到平衡条件下通过恒电位配位滴定法同时测定了铁和铝。控制溶液的pH值为1．5，温度为25℃，硝酸钠离子强度调节剂浓度为0．1mol／L，反应时间为60s。在氟-铁反应达到平衡，但在氟-铝反应没有达到平衡的条件下，采集滴定数据。根据非平衡条件下，响应值的重现性，利用最小二乘法求出常数kFe、kAl及k0，进而计算出铁和铝的浓度。     

离子选择性电极非线性测定水中氟离子的含量

利用氟离子选择性电极测定系列氟离子标准溶液的电极电位(vs.SCE),用测得的电极电位值与氟离子标准溶液的浓度数据进行非线性工作曲线拟舍,可准确测定1×10~(-6)～1×10~(-5)moL/L氟离子溶液的浓度。该法易于实现氟离子溶液的自动连续监测,适于氟离子溶液浓度的在线测量。     

邻苯二酚紫-示波计时电位法间接测定天然水中总酸溶铝

报道邻苯二酚紫（PCV）-示波计时电位法间接测定天然水中的总酸溶铝。在0．5mol/LNH4Ac（pH6．4）缓冲溶液中,PCV在dE／dt－E示波极谱图上出现两个切口,Ep1＝－0．80V和Ep2=-1．20V。加入铝后,切口深度变浅,切口深度的变化△h同加入铝量有关。在最佳条件下,即0．5mol/LNH4Ac,pH6．4及1×10-3mol/LPCV,第二个切口△h2变浅的幅度在4×10－7～4×10-6mol/L铝浓度范围内有线性关系。检测限为2×10-7mol/L。在1×10－6mol/L时标准偏差为8．3％（n=10）。应用该法测定了天然水中总酸溶铝,并同ICP-AES所获结果进行了对照。结果基本一致。     

电聚吡咯固定化酷氨酸酶电极的制备及性能

在应用恒电位法电化学聚合吡咯的同时 ,将酪氨酸酶固定在导电聚吡咯膜内 ,制成一种灵敏、稳定的酪氨酸电极 .讨论了溶液 pH值和聚合电位对酶固定化的影响 ,对酶分子嵌入吡咯膜前后的SEM图和CV曲线进行了分析、比较 .该电极对甲苯酚响应的线性范围为 5 .0× 10 -8～ 1.0× 10 -6mol/L ,最适 pH值为 6 .6 ,酶反应表观上遵循Michaelis_Menten动力学 ,表观米氏常数为 2 .2× 10 -5mol/L .     

离子交换树脂分离富集催化动力学电位法测定痕量钒

研究了在稀硫酸介质中,以痕量钒(Ⅴ)催化溴酸钾氧化碘化钾的反应为指示反应,用碘离子选择电极跟踪Ⅰ-,建立了催化动力学电位法测定钒的方法.在一定的条件下,该指示反应为一级反应,反应速度可用电位的变化△E表示.当时间固定,△E与钒(Ⅴ)浓度在0.015～0.1 mg·L-1范围内呈线性关系.方法的检出限为3.2×10-7g·L-1.该法可用于钢铁样品中钒的测定,试样溶液中钒(VO3-4)预先从弱碱性溶液中(pH 7.0～8.2)用强碱性阴离子交换树脂分离.用1.0 mol·L-1硫酸从树脂上将钒(Ⅴ)洗脱后按所述方法测定.测定结果与标准值相符,相对标准偏差小于5%.     

聚苯胺/钴-氧化钴膜作传感元件的pH传感器的性能

研究了在玻碳电极上修饰不同物质所制得的pH传感器,通过电位滴定的方法比较得出先修饰聚苯胺,再修饰钴-氧化钴膜的电极对pH有较好的响应,能代替玻璃电极应用在实际样品测定中. 探究了最佳修饰条件为:先在0.1 mol/L苯胺的盐酸(1 mol/L)溶液中, 电位范围为-0.2～1.0 V,以100 mV/s 的扫描速率循环伏安扫描10圈修饰聚苯胺膜;接着在含2.0×10-4 mol/L Co2+的磷酸盐缓冲溶液(PBS)(pH=7.5)中,电位范围为-1.2～1.2 V,以100 mV/s的扫描速率循环伏安扫描 5圈修饰钴-氧化钴膜. 得到的修饰电极响应斜率为-61.60 mV/pH,响应范围pH值为0.5～13.     

聚缬氨酸修饰电极在抗坏血酸共存下选择性测定去甲肾上腺素

利用循环伏安法制备了聚缬氨酸修饰电极,在缬氨酸浓度为0.01 mol/L的磷酸盐缓冲溶液(pH=9.0)中,起止电位范围为1.0～2.4 V,以40 mV/s扫描速率循环扫描9周进行聚合. 聚缬氨酸膜对去甲肾上腺素(NE)的电化学氧化具有明显的催化作用. 研究了NE在聚缬氨酸修饰电极上的电化学行为,建立了测定NE的电化学分析新方法. pH值在2.2～8.0范围内,研究了磷酸盐缓冲溶液pH值对NE电化学行为的影响. 结果表明,氧化还原峰电位随pH值升高发生负移;在pH=4.0磷酸盐缓冲溶液中,NE在修饰电极上呈现1对灵敏的氧化还原峰,利用循环伏安法测定NE还原峰电流可排除抗坏血酸(AA)干扰. NE在聚缬氨酸修饰电极上的还原峰电流与其浓度在4.6×10-7～1.1×10-5 mol/L和1.1×10-5～1.2×10-4 mol/L范围内呈良好线性关系;相关系数分别为0.995 7和0.991 8;检出限(S/N=3)为8.0×10-8 mol/L;其回归方程为ipc(A)=6.80×10-7+1.05c,ipc(A)=1.23×10-5+0.16c. 修饰电极具有良好的灵敏度、选择性和稳定性,可用于去甲肾上腺素针剂样品分析.     

血红蛋白在裸银电极上的直接电化学及其分析应用

报道了血红蛋白(Hb)在裸银电极上的电化学氧化还原行为。在+0.4～-0.2V(vs.SCE)电位范围内于pH=4.5的0.1mol/LNaAc-HAc底液中,血红蛋白产生一对灵敏的氧化还原峰。峰电位之差△E为0.25V(扫描速度20mV/s).动力学研究表明:电极反应的电子转移数n为0.94,表现电子传递速率常数Ks为0.032.连续电位扫描30min,峰电流变化分别为0.2μA(还原峰)和0.15μA(氧化峰).两峰与血红蛋白浓度在2×10^-7～2×10^-6mol/L和2×10^-6～1.5×10^-5mol/L范围内均呈良好线性关系,已应用于血红蛋白的分析测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).