Aqueous solubilities and octanol-water partition coefficients of binary liquid mixtures of organic compounds at 25°C

From thermodynamics and certain assumptions it is shown that, under the usual experimental conditions, the octanol-water partition coefficient (K_o/w) of a given organic liquid should be the same whether the substance is partitioned neat or as part of a mixture. Measurements of several mixtures of n-propylbenzene (log K_o/w=3.71±0.04)+ethylbenzene (log K_o/w=3.16±0.01) clearly confirm this. It is also shown that the aqueous solubility (S_w) of a neat organic liquid can be related to its aqueous solubility (S _w ), when it is present at volume fraction in an organic liquid mixture, by S _w =S_w, where is its activity coefficient in the organic mixture. The measured S _w values for n-propylbenzene + ethylbenzene (1), n-hexane + nitrobenzene (>1) and di-isopropyl ether + chloroform (<1) are found to be in good agreement with the predicted values (average differences of, respectively, <2%, 8% and 6%). In general, the bounds on S _w are expected to be 0w w.     

A new improved expression for gamma-ray detection efficiency of Ge(Li) detectors

In the present paper, a new improved expression for -ray detection efficiency of Ge(Li) detectors, ⁰ , is given. It is represented as a continuous function of x (viz. E ^–1) with a maximum and decreases very rapidly to a small positive value as -ray energy, E, drops to 40 keV or lower, but slowly as E rises to 1.7 MeV or higher. Since it can well represent the whole physical process of the -ray detection, this expression may be one of the simplest and most precise representations, for ⁰ at the present time.     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃

     

Fluorescent Molecular Sensing System Based on Tri-Pyrenes-Labeled γ-Cyclodextrin at the Hetero Rim

Fluorescent active host labeled at the upper and lower rims of -cyclodextrin, namely, mono-3^A-deoxy-3^A-pyrenebutylamido-6^X,Y-O-bis-pyrenebutylate-mono-altro--cyclodextrin (-3) has been synthesized as a chemosensor for steroidal guests using fluorescence spectra change upon a guest addition. The -3 shows monomer and excimer fluorescence, which results in an increase of the intensity of monomer and decrease of excimer fluorescence with a host–guest binding in the cyclodextrin cavity. The extent of monomer and excimer fluorescence variations of -3 was used as an indication for the sensing ability for the guests examined. The guest-induced fluorescence changes were measured for 10^–7 M solutions of -3. The sensing parameters (I_ex/I⁰_ex and I_mon/I⁰_mono) were used to describe the sensing ability of -3. The values of I_ex/I⁰_ex describe that -3 shows less selectivity for guests than that of mono-3^A-deoxy-3^A-pyrenebutylamido-6^X-O-mono-pyrenebutylate-mono-altro--cyclodextrin (-2), and the values of I_mon/I⁰_mono show that -3 shows higher sensitivity and selectivity than that of -2.     

Silylation of γ,γ-bis(alkoxycarbonyl)-substituted aliphatic nitro compounds: synthesis of N,N-bis(trimethylsilyloxy)aminocyclopropanes*

Silylation of ,-bis(alkyloxycarbonyl)--aryl- and ,-bis(alkyloxycarbonyl)--alkyl-substituted aliphatic nitro compounds proceeds stereoselectively to give the corresponding N,N-bis(trimethylsilyloxy)aminocyclopropanes in high yields. These compounds can be used as synthetic equivalents of nitrosocyclopropanes.     

Steroid glycosides from the starfishSolaster dawsoni (Verrill)

Two novel glycosides from the starfishSolaster dawsoni (Verrill) have been isolated and characterized: 24-O-(-D-xylopyranosyl)-5-cholestane-3,6,15,24,26-pentaol (solasteroside S₁) and (24R)-29-O-[-D-galactofuranosyl-(16)--D-galactofuranosyl]-24-ethyl-5-cholestane-3, 6,8,15,16,29-hexaol (solasteroside S₂).Translated fromIzvestiya Akademu Nauk. Seriya Khimicheskaya, No. 5, pp. 980–982, May, 1993.     

In Situ IR Spectroscopic Studies on Molybdenum Nitride Catalysts: Active Sites and Surface Reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo₂N/-Al₂O₃ catalyst are presented in this paper. The surface sites of fresh Mo₂N/-Al₂O₃, both Mo⁺ (0<<2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm^-1, due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo₂N/-Al₂O₃ behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo₂N/-Al₂O₃ catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo₂N/-Al₂O₃ catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.     

Effect of ageing atmospheres on the changes in surface free energies of oxygen plasma-treated polyethylene films

The changes in the surface properties of oxygen plasma-treated polyethylene films during ageing in various atmospheres (water, dry nitrogen gas, and hexane) were studied from the viewpoint of the interaction of the surface functional groups formed on the films and the ageing media. The XPS (x-ray photoelectron spectroscopy) and the SSIMS (static secondary ion mass spectrometry) spectra indicated the formation of polar groups containing oxygen such as C=O on the film surface. The changes in the critical surface tension (_C) of the film with ageing time were largely affected by the ageing atmospheres: the _C value of the film aged in water increased, and those of the films aged in nitrogen gas and hexane decreased with an increase in ageing time. These different tendencies among the ageing media could be understood reasonably with examining the surface free energy ratios (the total energy, _S ^tot , the dispersion force component, _S ^d / _S ^tot , the polar component, _S ^p / _S ^tot , the hydrogen bonding component, _S ^h / _S ^tot ) of the films. The ageing in water of which _L is large gave the films with higher _S ^p / _S ^tot values, suggeting that the overturn and/or the orientation of the polar groups toward the water phase occurred so as to minimize the discrepancy of the surface free energy between the polymer surface and water. On the other hand, the ageing in nitrogen gas and hexane media of which _L are small gave the films with lower _S ^p / _S ^tot and _S ^h / _S ^tot values, suggesting the overturn and/or the orientation of the polar groups into the bulk polymer.     

Adsorption behavior of polymers having phosphoric acid group on γ-Fe2O3 and magnetic characteristics in magnetic coatings

Polymers having phosphoric acid groups were prepared as a model binder for magnetic coatings, and the correlation among the adsorption behavior of the polymers onto-Fe₂O₃ particles and the dispersibility, the orientation, and the packing density of-Fe₂O₃ particles in the magnetic coatings was investigated.PMMA homopolymer molecules hardly adsorbed on-Fe₂O₃, and the interfacial tension at a water/polymer solution (toluene) interface ( _W/T) was scarcely changed compared with a water/toluene interface. Increasing with the content of polymeric phosphoric acid group, the adsorbance of polymer increased and the interfacial tension ( _W/T) decreased. When the content of polymeric phosphoric acid groups was over 0.4 mol%, the adsorbance of polymer and interfacial tension ( _W/T ) remained constant. When these polymers were used as a binder for magnetic tapes, the dispersibility of-Fe₂O₃ in the magnetic coatings was improved, increasing with the content of polymeric phosphoric acid group; however, when the content of phosphoric acid group was over 0.2 mol%, its dispersibility decreased abruptly.Studies on Recording Magnetic Materials and Magnetic Composite. XVIII.     

Comparison of the Complexation of Cosmetical and Pharmaceutical Compounds with γ-Cyclodextrin, 2-Hydroxypropyl-β-cyclodextrin and Water-Soluble β-Cyclodextrin-co-epichlorhydrin Polymers

The ability of different cyclodextrins (CDs): CD, 2-hydroxypropyl CD to complex drugs like 3--hydroxy-11-oxoolean- 12-en-30-oic acid, 2-ethylhexyl-3-(4-methoxyphenyl)-2-propanoate and menthol was compared to that of water-soluble polymers: CD-co-epichlorhydrin polymer (pCD/EP) and CD-co-epichlorhydrin polymer partially modified with trimethylammonium groups (pCD/EPN⁺). 3--Hydroxy-11-oxoolean-12-en-30-oic acid was poorly solubilized by CD compared with other CD derivatives, however the determination of the complexation constants was possible for pCD/EP, K₁₁ = 740, K₁₂ = 4, for pCD/EPN⁺, K₁₁ = 681, for CD, K₁₁ = 16 and for hydroxypropyl CD, K₁₁ = 114, K₁₂ = 3.4. A significant increase of the solubility was observed for 2-ethylhexyl-3-(4-methoxyphenyl)-2-propanoate with all host molecules, it was 916 times its solubility in pure water with pCD/EPN⁺, 1116 and 1300 times with 2-hydroxypropyl CD and pCD/EP respectively. The association constants are K₁₁ = 7970, K₁₁ = 4700, K₁₁ = 1470, K₁₁ = 230 and K₁₂ = 200 with pCD/EP, pCD/EPN⁺, CD, 2-hydroxypropyl CD respectively. An increase of the solubility of menthol was observed with all CD derivatives, up to 36–37 times, except for CD. The complexation constants are similar equal to about 200.     

Equilibrium in Saturated Ca(OH)2 Solutions: Parameters and Dissociation Constants

A new computer program has been developed for the calculation of pH, pOH, hydroxide ion concentration m _OH, species distribution coefficients _i, ionic activity coefficients _i ionic strength I, buffer capacity , solubility product K _s0, and the two dissociation constants, K _b1 and K _b2, corresponding, respectively, to first and second dissociation steps of Ca(OH)₂ in aqueous solution. Previously developed methodology, for the calculation of pH, _i, _i I, and parameters of pH buffer solutions, starting from the corresponding acidity constants, has been adapted for the case of aqueous Ca(OH)₂ solutions, for which the pertinent stoichiometric relationships are different from those applicable to mixtures of acids and their salts. The results show that, contrary to what is currently assumed, the first dissociation is far from complete. Values are given for the concentrations and activities of species Ca(OH)₂(aq), Ca(OH)⁺(aq), and Ca²⁺ (aq) in saturated calcium hydroxide solutions at 25°C.     

Condensation of 2-(1-ethoxyvinyl)oxiranes with sodiomalonic ester and decarboxylation of the reaction products obtained

-(1-Ethoxyvinyl)- and -(1-ethoxyvinyl)--ethoxycarbonyl--butyrolactones were obtained by the reaction of 2-(1-ethoxyvinyl)oxiranes with sodiomalonic ester. Decarboxylation of the -(1-ethoxyvinyl)--ethoxycarbonyl-butyrolactones in DMSO leads to -(1-ethoxyvinyl)--butyrolactones, the hydrolysis of which gives -acetyl-butyrolactones. Ethyl trans-3-acetyl-3-pentenoate was obtained by decarboxylation of -methyl--(1-ethoxyvinyl)--ethoxycarbonyl--butyrolactone in DMSO.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 22–25, January, 1992.     

New Molybdenum(V) Complexes Prepared by the Oxidation of Dinuclear Quadruply-Bonded Molybdenum(II) Monothiocarboxylates

Oxidation of molybdenum(II) thiopivalate and thiobenzoate in the presence of -picoline or pyridine results in the formation of dinuclear molybdenum(V) complexes of the general formulae [Mo₂O₂(-O)₂(-SO₄)L₄] with L = -picoline or pyridine and [Mo₂O₂(-O)(-S)(-SO₄)L₄] with L = -picoline. As determined by X-ray structure analysis, two complexes with -picoline differ in their bridging cores: In one complex, two Mo atoms are doubly bridged through two oxygen atoms; in the other, one Mo atom is doubly bridged through oxygen and sulfur atoms. However, they both crystallize together. The product is solvated with -picoline and water molecules. Molybdenum atoms exhibit distorted octahedral coordinations. The same complexes were prepared also through direct reactions of [Mo₂O₃(O₂CCH₃)₄] with thiopivalic and thiobenzoic acid in the presence of -picoline or pyridine. The appearance of the oxo-oxygens and sulfido-sulfur as well as sulfato ligand is explained by the molybdenum-catalyzed oxidation of thiocarboxylates.     

Phase equilibria in the Ag4SSe-SnTe system

The phase diagram of the system Ag₄SSe-SnTe is studied by means of X-ray diffraction, differential thermal and metallographic analyses and measurements of the microhardness and the density of the material. This diagram is divided into two eutectic-type subdiagrams by the composition Ag₄SSe·2SnTe. The unit-cell parameters of the intermediate phases 3Ag₄SSe·SnTe (phase A) and -Ag₄SSe·2SnTe (phase B) are determined as follows: for phase A: a=0.7851 nm, b=0.7196 nm, c=0.6296 nm, =101.32°, =85.90°, =111.36°; for phase B: a=0.3662 nm, b=0.3303 nm, c=0.3343 nm, =90.74°, =108.94°, =91.91°. The phase Ag4SSe·2SnTe melts congruently at 615°C and a polymorphic transition of the phase takes place at T _- =110°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

α,β-Butenolides

,-Dibromo--('-carbethoxyacetony)-^,-butenolide (I) reacts with amines in diethyl ether solution to give -bromo-amino--('-carbethoxyacetony)-^,-butenolides. Compounds n are converted to -bromo-amino--('-carbethoxyacetony)-^,-butenolides on reaction with amines. The corresponding arylhydrazones (VI and VII) are obtained by the reaction of I and II with p-nitro- and 2,4-dinitrophenylhydrazines. Compound I reacts with phenylhydrazine to give furopyridazine VIII.See [1] for communication IV.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 867–871, July, 1972.     

Crystal structure of 1-(2-pyridiniomethyl)-2,4-<Emphasis Type="Italic">bis</Emphasis>(phenylsulfonyl)benzene bromide

The crystal structure of 1-(2-pyridiniomethyl)-2,4-bis(phenylsulfonyl)benzene bromide, (C₂₄H₂₀NO₄S₂)⁺. Br^– (I) has been investigated by X-ray diffraction (XRD)analysis. The triclinic structure of I (space group P1, a = 7.863 , b = 8.350 , c = 9.043 , = 94.00°, = 97.81°, = 104.62°, Z = 1) was solved by direct methods and refined by full-matrix least-squares analysis in an anisotropic approximation to R = 0.048 for all 4570 reflections collected (CAD-4 automatic diffractometer, CuK ). The geometrical parameters of the organic cation were determined with a sufficient degree of accuracy. The crystal structure of I involves a very strong interionic hydrogen bond N⁺-HBr^–.Original Russian Text Copyright © 2004 by A. N. ChekhlovTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 759–763, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

The effects of cyclodextrin inclusion of the ferrocenemonocarboxylate anion on the kinetics of its oxidation by bis(pyridine-2,6-dicarboxylato)cobaltate(III) in aqueous solution

The effects of -, -, dm-(heptakis(2,6-di-O-methyl)--) and -cyclodextrins (CD) on the kinetics of the electron-transfer reaction of the ferrocenemonocarboxylate anion (FCA^–) with bis(pyridine-2,6-dicarboxylato)cobaltate(III) have been investigated in aqueous solution (0.20 M Na₂HPO₄, pH 9.2) at 25.0°C. Substantial decreases in the rate constants for the electron-transfer reactions were observed upon cyclodextrin inclusion of the reductant, due to an increase in the FCA^0/– reduction potential and to the insulation of the reductant from oxidant. The inclusion stability constants for {FCA·CD}^– were evaluated from the¹H NMR and kinetic data, and the order of the stability constants was found to be -CDdm-CD-CD>-CD.     

The association of inclusion complexes of cyclodextrins with azo dyes

OrangeII (4) and cyclodextrin (CD) form 2 : 1 and 2 : 2 complexes. The complexes self-associate and microscopy indicates the formation of a fibroid aggregate. In the induced c.d. spectrum, the ^* band of this complex appears at 500 nm in solution, but in the aggregate it changes to aJ-band due to the head-to-tail stacking of4 and aH-band due to its parallel stacking; this indicates that the aggregation expands not only in the direction of the symmetry axis of the CD, but also in the other two dimensions.²H-NMR spectroscopy from deuteron exchange and solvation between the aggregate and deuterium oxide exhibits quadrupole splitting in the region of 0–0.2 KHz. The orientation behavior obtained from this splitting suggests the formation of a liquid-crystaloid substance.¹³C-T ₁ NMR indicates that molecules4 and CD show the sameT ₁ values even at 333 K; this complex behaves like a single molecule. The behaviors of other azo dye-CD complexes are also discussed.DeceasedDedicated to Professor József Szejtli.     

Microcalorimetric Evaluation of Precipitation in Cu–2Be–0.2Mg

Beryllium precipitation from the Cu-rich matrix in a Cu–2 mass% Be–0.2 mass% Mg alloy homogenized and quenched from 1073 K was studied by differential scanning calorimetry (DSC). The DSC traces showed two main exothermic effects, A and B, each comprising two subeffects: A₁ and A₂ , and B₁ and B₂ respectively. Effects A₁ and A₂ correspond to the precipitation of GP zones and subsequent overlapping and independent precipitation of the phase. Only at very low heating rates can be inherited from GP zones. Effects B₁ and B₂ correspond to heat evolved during transitions to the states with and phases, respectively. Heat effect A can be quantitatively described in terms of solid solubilities before and after precipitation, and of the precipitation heats of the phases involved. The heat content of the combined GP zone/ phase precipitation effect was proportional to the number of beryllium atoms precipitated, yielding an average value of 21 kJ mol^–1 beryllium for beryllium precipitation. It was shown that the phase arises from the combined transition from states with GP zones and phases, whereas arises from the transition of states with and phases. The apparent activation energies associated with GP zones and , and phases are 1.16±0.08, 1.18±0.07, 1.37±0.08 and 1.74±0.09 eV, respectively. These values are discussed in terms of the mobility of dissolved atoms related to the concentrations of excess vacancies and solute-vacancy complexes, and the direction of plate-like precipitate growth (either normal or perpendicular to the plate). It is inferred that the main roles of magnesium are to decrease the amount and rate of GP formation, to enhance the volume fraction of and to suppress the discontinuous precipitation of .This revised version was published online in November 2005 with corrections to the Cover Date.     

Transfer activity coefficient of the proton in water-pyridine mixtures. A comparison of some extrathermodynamic assumptions

Various water-pyridine mixtures have been selected in order to compare several of the most popular extrathermodynamic assumptions involved in the determination of the transfer activity coefficient of the proton, _t(H⁺). Two techniques have been utilized for this purpose: voltammetry [study of the ferrocene, ferricyanide, or thallium(1) systems] and potentiometry at equilibrium (emf measurements of various galvanic cells, including liquid junctions and hydrogen electrode or silver electrode as a test electrode). The assumptions have been classified into various groups [e.g., _t(Z^p+)=_t(Z^q+) or _t(X^–)=_t(Y⁺)], and the values of _t(H⁺) have been experimentally determined in each case. The results vary depending upon the basic assumption (several pH units); less important differences (e.g., 0.5 pH unit) occur within a given group, and this may be assigned to the nature of the reference species chosen. A simple model of solvation has been also examined; the application of the law of mass action to the corresponding equilibrium provides results close to the _t(X^–) =_t(Y⁺)type of assumptions which ultimately leads to most self-consistent results.