Investigation on the thermal degradation of acrylic polymers with fluorinated side-chains

The thermal degradation of poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′,7″-tridecafluoroheptylacrylate and poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′-dodecafluoroheptylmethacrylate has been studied in isothermal conditions at 450-750 °C using pyrolysis-gas chromatography. The type and composition of the pyrolysis products give useful information about mechanism of thermal degradation. It was shown that the main thermal degradation process for both polymers is random main-chain scission. The major degradation products for fluorinated polyacrylate are monomer, dimer, saturated diester, trimer, and corresponding methacrylate. The fluorinated polymethacrylate gives monomer as the main product of thermal destruction. As a result of side-chain reaction, the thermal degradation of the fluorinated polyacrylate also produces remarkable amounts of alcohol. On the other hand, the respective alcohol is only a minor component among the pyrolysis products of the fluorinated polymethacrylate. For both polymers, the main nontrivial degradation product coming from the alkyl ester decomposition is the corresponding fluorinated cyclohexane. The formation of the fluorinated cyclohexanes may be accounted for a nucleophilic bimolecular substitution pathway.     

Structure and ion selectivity of the open potential-dependent potassium channel

The structure and ion selectivity of the potential-dependent potassium channel is investigated. It is shown that the channel constructed by joining the α-subunit with the β-subunit concave, when the axial symmetry axes coincide, is the potential-dependent potassium channel in the open state.     

The role of β-cyclodextrin and hydroxypropyl β-cyclodextrin in the secondary chemical equilibria associated to the separation of β-carbolines by HPLC

The use of cyclodextrins (CDs) in HPLC as mobile phase additives provides a flexible alternative for the separation of chemically related compounds because these separations can be performed on conventional columns and are economically advantageous over the use of chiral stationary phases. The present paper describes the influence of the presence of β-cyclodextrin (β-CD) and 2-hydroxypropyl-β-cyclodextrin (HPβ-CD) on the separation of the β-carboline alkaloids norharmane, harmane and harmine. The nature of the stationary phase (reverse phases C₁ and C₁₈) affects the chromatographic separations and also the stability of the inclusion complexes that are developed. The changes in the proportion of the organic solvents at constant concentration of CDs (3 mM for β-CD and 15 mM for HPβ-CD) modify the retention factors (k′) for all alkaloids studied. The nature of the organic solvent in the mobile phase also changes the chromatographic parameters. The logarithm of the capacity factor (k′) is linearly increased with the proportion of water in the hydro-organic mobile phase (ethanolic or methanolic) but the slopes obtained vary depending on the CD added to the mobile phase. The role of competitive equilibria, i.e., chromatographic distribution and inclusion complexes formation is discussed. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May, 14–17, 2006     

Direct capillary gas chromatographic analysis and thermal stability of bile acid esters of glucose

Summary This paper deals for the first time with a direct method for analysis of the α and β anomers of bile acid esters of glucose by capillary gas chromatography (CGC) without the need for a hydrolytic step. The bile acid esters were derivatized to their trimethylsilyl (TMS) ethers, which in turn were chromatographed on a short (7m) metal capillary column chemically coated with a thin (0.15 μm) film of thermostable, non-polar polydimethylsiloxane. Satisfactory CGC separation of the isomeric bile acid esters was achieved on the column; the β anomers eluted before the corresponding α isomers. Particularly noteworthy is that the α anomers are partially isomerized to the corresponding β anomers, and that both anomers are partially decomposed during CGC analysis, demonstrating the chemical specificity and thermal instability of the bile acid esters.     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Site-directed mutagenesis study on the thermal stability of a chemiric PQQ glucose dehydrogenase and its structural interpretation

We have previously reported that a chimeric pyrroloquinoline quinone (PQQ) glucose dehydrogenase (GDH), E97A3, which was made up of 97% of Escherichia coli PQQGDH sequence and 3% of Acinetobacter calcoaceticus PQQGDH, showed increased thermal stability compared with both parental enzymes. Site-directed mutagenesis studies were carried out in order to investigate the role of amino-acid substitution at the C-terminal region, Ser 771, of a chimeric PQQGDHs on their thermal stability. A series of Ser 771 substitutions of a chimeric PQQGDH, E99A1, confirmed that hydrophobic interaction governs the thermal stability of the chimeric enzymes. Comparison of the thermal denaturation of E. coli PQQGDH and E97A3 followed by far-ultraviolet (UV) circular dichroism (CD) spectroscopy revealed that E97 A3 acquired stability at the first step of denaturation, which is reversible, and where no significant secondary structure change was observed. These results suggested that the interaction between C-terminal and N-terminal regions may play a crucial role in maintaining the overall structure of β-propeller proteins.     

Peculiarities of the effects of trifluoromethyl and alkoxycarbonyl groups on the structure and reactivity of acrylates

Ab initio quantum-chemical calculations of molecules of CF₃-substituted acrylates and their non-fluorinated analogs were carried out by the restricted Hartree-Fock (RHF) method and at the second-order Møller-Plesset (MP2) level of perturbation theory using the 6–31G^* basis set with full geometry optimization. Peculiarities of their molecular and electronic structure were revealed and the dipole moments, the polarizability and first molecular hyperpolarizability tensors, harmonic vibrational frequencies, electrostatic potentials, and local electron densities in the vicinity of the carbon atoms of the C=C bond were calculated. It was shown that CF₃-substituted acrylates are conjugated systems similar to their nonfluorinated analogs. Peculiarities of the structure and properties of CF₃-substituted acrylates are explained by p-π-interaction between the CF₃ group and the conjugated system.     

Study on the thermal degradation behavior and flame‐retardant property of polylactide/PEDPP blends

A phosphorus‐containing polyester, poly (ethylene diglycol phenylphosphinate) (PEDPP) was synthesized from phenylphosphonic dichloride and ethylene diglycol. The structure of PEDPP has been determined by Fourier transform infrared (FTIR) spectroscopy, ¹H nuclear magnetic resonance and matrix assisted laser desorption ionization‐time of flight‐mass spectrometer. A series of polylactide (PLA) blends with various content of PEDPP as flame retardant was prepared by direct melt compounding; the PLA/PEDPP blend is partially miscible. PEDPP is an effective flame retardant for PLA. The limiting oxygen index values increased from 19.7% for pure PLA to 29.0% for the blend containing 10wt% PEDPP. Thermogravimetric analysis‐FTIR analysis indicated that the PEDPP affected the pyrolytic decomposition process of PLA, which is established by the change of the pyrolytic decomposition rate and the gross mass of gaseous fuel formation. The pyrolytic decomposition activation energies of PLA and PLA/10%PEDPP were estimated via Flynn–Wall–Ozawa method. Copyright © 2013 John Wiley & Sons, Ltd.     

Functionalization of polymeric membranes by impregnation and in situ cross-linking of a PDMS/β-cyclodextrin network

In this paper a new method for the functionalization of porous membranes with β-CD is reported. Porous polypropylene (PP) hollow fibres have been impregnated with a mixture composed by a partially cross-linked polydimethylsiloxane (PDMS) and β-cyclodextrin (β-CD). The prepolymerization of the PDMS components was necessary to avoid their inclusion in the β-CD cavity. The firm heterogenization of the β-CD was obtained by in situ cross-linking of the PDMS/β-CD network in the porous membranes. The presence of the PDMS/β-CD network in the membranes was confirmed by FT-IR-ATR (on the outer and inner surfaces) and EDX analyses (on the cross-section).The effect of the impregnation times on membrane morphology, loading and porosity has been investigated. The binding capacity of the heterogenized β-CDs has been tested using the phenolphthalein as guest molecule.     

Investigation of the conformational transformations in some 7α-methyl-6-oxa-14β-analogs of steroidal estrogens by NMR spectroscopy

The stereochemical structure and conformational transformations of two 6-oxa-14β-estra-1,3,5(10), 8(9)-tetraenes having an α-methyl group at position 7 were investigated. It was found that the substituent at the C-17 atom has an effect on the formation of the conformers in solution. In the analog containing a C-17 keto group in solution there are two conformers, whereas the 17α-acetoxy derivative has only one conformer. In memory of Prof. A. A. Potekhin. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 82–834, June, 2008.     

On the mechanism of titanium-catalyzed cyclopropanation of esters with aliphatic organomagnesium compounds. Deuterium distribution in the reaction products of (CD3)2CHMgBr with ethyl 3-chloropropionate in the presence of titanium tetraisopropoxide

The reaction of (CD₃)₂CHMgBr with ethyl 3-chloropropionate in the presence of catalytic amounts of Ti(OPr)₄ results in (E)-1-(2-chloroethyl)-3,3-dideuterio-2-trideuterio-methylcyclopropanol and (CD₃)₂CDH, identified by mass spectrometry. The reaction mechanism is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 376–378, February, 2000.     

Molecular modeling of the inhibitory mechanism of copper(II) on aggregation of amyloid β-peptide

Aggregation of amyloid β-peptide (Aβ) into insoluble fibrils is a key pathological event in Alzheimer’s disease (AD). Under certain conditions, Cu(II) exhibits strong inhibitory effect on the Zn(II)-induced aggregation, which occurs significantly even at nearly physiological concentrations of zinc ion in vitro. Cu(II) is considered as a potential factor in the normal brain preventing Aβ from aggregating. The possible mechanism of the inhibitory effect of Cu(II) is investigated for the first time by molecular modeling method. In the mono-ring mode, the Y10 residue promotes typical quasi-helix conformations of Aβ. Specially, [Cu-H13(NTT)-Y10(OH)] complex forms a local 3.0₁₀ helix conformation. In the multi-ring mode, the side chains of Q15 and E11 residues collaborate harmoniously with other chelating ligands producing markedly low energies and quasi-helix conformations. [Cu-3N-Q15(O)-E11(O1)] and [Cu-H13(NTT)-Y10(OH)] complex with quasi-helix conformations may prefer soluble forms in solution. In addition, hydrogen-bond interactions may be the main driving force for Aβ aggregation. All the results will provide helpful clues for an improved understanding of the role of Cu(II) in the pathogenesis of AD and contribute to the development of an “anti-amyloid” therapeutic strategy.     

Analysis of the metal-catalyzed decomposition of γ- and δ-haloesters by GC/FT-IR

Summary The decomposition of γ- and δ-haloesters has previously been observed to take place within a commercial GC/FT-IR light-pipe system. Using a home-built light-pipe interface, an analysis of this same class of compounds was conducted from which the source of the decomposition was determined to be a brass fitting central to the commercial system's assembly. It is proposed that the reaction is due to a weakening of the carbon-halogen bond by metal interaction thereby allowing lactonization to occur.     

An original way to use a β-cyclodextrin-bonded silica stationary phase in electrochromatography. Application to the achiral separation of nucleobases and nucleosides

Summary Although β-cyclodextrin-bonded silica stationary phases are usually dedicated to the separation of enantiomers, they can also be used for achiral purposes, taking advantage of the complex interactions between the solutes and the cyclodextrins. The work described in this paper was intended to show how such stationary phases can be used in short-end injection capillary electrochromatography (CEC) for rapid (<6 min) resolution of a mixture of purines and pyrimidines. Several experimental conditions (mobile-phase composition, voltage and temperature) were investigated to determine the optimum operating conditions for the method, which can also be applied to the analysis of nucleosides. Quantitative analysis was also performed; theophylline was used as internal standard to assess the linearity and the repeatability of the method. Limits of detection ranged from 4 to 13 μm and repeatability was good (RSD never exceeded 2.6%).     

Investigation of the thermal degradation of fully aromatic regular polyesters: Poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate)

The thermal behaviour and degradation mechanism of fully aromatic polyester, poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate), were studied by pyrolysis-gas chromatography and pyrolysis-gas chromatography/mass spectrometry at 500-700 °C, and by thermogravimetry. The influence of fullerene C₆₀ additives on thermal behaviour and thermal degradation was investigated. On the basis of pyrolysis products determined, the origin of the main degradation products (maleic anhydride, phenol, hydroquinone, phenyl ether, p-hydroxybenzoate-p′-phenol, etc.) was estimated. The fullerene is a well-known efficient acceptor of radicals and its presence influences the thermal degradation process of polymers shifting the decomposition from a radical pathway to a non-radical mechanism. Thermal degradation mechanism of poly(oxy-1,4-phenyleneoxy-fumaroyl-bis-4-oxybenzoate) is discussed in detail.     

Investigation of thermal degradation mechanism of an aliphatic polyester using pyrolysis-gas chromatography-mass spectrometry and a kinetic study of the effect of the amount of polymerisation catalyst

The thermal degradation mechanism of the aliphatic biodegradable polyester poly(propylene succinate) (PPSu) and the effect of the polymerisation catalyst (tetrabutyl titanate, TBT) were studied using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) and TGA analysis. It is found from mass ions detection, that the decomposition takes place, mainly, through β-hydrogen bond scission and secondarily by α-hydrogen bond scission. At low pyrolysis temperatures (360 and 385 °C) gases as well as succinic anhydride, succinic acid and propanoic acid are mainly produced while allyl and diallyl succinates are formed in smaller quantities. At high temperatures (450 °C) the behaviour is inverted. Using the isoconversional methods of Ozawa and Friedman it is founded that PPSu degrades by two consecutive mechanisms. According to this analysis the first mechanism that takes place at low temperatures is autocatalysis with an activation energy of about E = 110-120 kJ/mol. The second mechanism is a first-order reaction with E of 220 kJ/mol, and corresponds to the extended β- and α-hydrogen bond scissions. These activation energies are slightly dependent on the catalyst amount and are shifted towards lower values with an increase of TBT content from 3 × 10⁻⁴ to 3 × 10⁻¹ mol TBT/mol succinic acid (SA).     

On the assessment of compliance with legal limits Part 1: signal and concentration domains

Taking into account the uncertainty of measurement when assessing compliance of a given sample with compositional specifications or statutory limits is an open question. Rigorous assessment should be performed within the signal domain, and by considering both α and β errors. Working within the concentration domain through a calibration function, which is affected by additional experimental uncertainties, involves a different degree of uncertainty and can sometimes lead to unreliable verdicts. The matter is discussed, and illustrated with the aid of some worked examples, each using multiple simulated data sets, obtained by adding an arbitrarily chosen Gaussian noise to representative response/concentration functional relationships. Received: 12 October 2000 Accepted: 12 July 2001     

The weak nuclear force, the chirality of atoms, and the origin of optically active molecules

Although chemical phenomena are primarily associated with electrons in atoms, ions, and molecules, the masses, charges, spins, and other properties of the nuclei in these species contribute significantly as well. Isotopes, for instance, have proven invaluable in chemistry, in particular the elucidation of reaction mechanisms. Elements with unstable nuclei, for example carbon-14 undergoing beta decay, have enriched chemistry and many other scientific disciplines. The nuclei of all elements have a much more subtle and largely unknown effect on chemical phenomena. All nuclei are innately chiral and, because electrons can penetrate nuclei, all atoms and molecules are likewise chiral. This article describes in considerable detail the discovery of chiral nuclei, how this unusual chirality may influence the chemical behavior of atoms and molecules, and how atomic chirality may have been responsible for the synthesis of optically active molecules in the pre-biotic world.     

Insights into the electrochemical degradation of sulfamethoxazole and its metabolite by Ti/SnO2-Sb/Er-PbO2 anode

Electrochemical degradation of sulfamethoxazole (SMX) and its metabolite acetyl-sulfamethoxazole (Ac-SMX) by Ti/SnO₂-Sb/Er-PbO₂ were investigated. Results indicated that the electrochemical degradation of SMX and Ac-SMX followed pseudo-first-order kinetics. The rate constants of SMX and Ac-SMX were 0.268 and 0.072 min^-1 at optimal current density of 10 and 14 mA/cm², respectively. Transformation products of SMX and Ac-SMX were identified and the possible degradation pathways, including the cleavage of S-N bond, opening ring of isoxazole and nitration of amino group, were proposed. Total organic carbon removal of SMX was nearly 63.2% after 3 h electrochemical degradation. 22.4% nitrogen of SMX was transformed to NO₃^-, and 98.8% sulfur of SMX was released as SO₄^2-. According to quantitative structure-activity relationship model, toxicities of SMX and Ac-SMX to aquatic organisms significantly decreased after electrochemical degradation. Electric energy consumption for 90% SMX and Ac-SMX degradation was determined to be 0.58-8.97 and 6.88-44.19 Wh/L at different experimental conditions, respectively. Compared with parent compound SMX, the metabolite Ac-SMX is more refractory and toxic, which emphasizes the importance of taking its metabolites into account when investigating the disposal of pharmaceuticals from wastewater.