Comparative substoichiometric extraction of silver with potassium salts of ethyl,propyl, butyl,pentyl and benzyl xanthates

A rapid and sensitive substoichiometric radiochemical method has been developed for the comparative extraction and quantification of silver with potassium salts of ethyl, propyl, butyl, pentyl and benzyl xanthates from hydrochloric, nitric and sulfuric acid media into chloroform. The effect of 0.1–4M H⁺ ion concentration of the respective acid on the substoichiometric extraction of silver was critically studied. The efficiency of the method developed was tested by the determination of 10–100 μg silver in standard solutions with an average percentage of error better than 2. The methods developed have been utilized to determine silver content in photofilm washing collected from various photostudios in Tirupati, India.     

Substoichiometric radiochemical determination of mercury with potassium benzyl xanthate

A sensitive and rapid radiochemical method has been developed for the determination of microgram amounts of mercury by substoichiometric extraction of its 12 complex with potassium benzyl xanthate into chloroform from pH 5.5 acetate buffer. The influence of various foreign ions on the extraction was studied. 2–20 g of mercury was determined with an average error of 1.78%. The method developed was utilized to determine the mercury content of water samples.     

Utilization of potassium ethyl xanthate as a substoichiometric reagent for the determination of indium

A sensitive and rapid radiochemical method has been developed for the determination of microgram amounts of indium(III) based on the substoichiometric extraction of its 13 complex with potassium ethyl xanthate from pH 7 ammonia buffer into chloroform. 5–50 g of indium was determined with an average error of 1.56%. The effect of associated species on the extraction was studied.     

Radiochemical determination of antimony

A radioanalytical method based on substoichiometric principles has been developed for the extraction and determination of antimony/III/ with 1-/2-pyridylazo/-2-naphthol /PAN/. Antimony/III/ forms a red complex with PAN in the presence of I^– or Br^–, which is extractable into benzene from sulphuric acid media.     

A study on the solvent extraction of Ag/I/ with 1,2,3-benzotriazole in chloroform

A rapid and selective method has been developed for the substoichiometric extraction of Ag/I/with 1,2,3-benzotriazole /1,2,3-BT/ in chloroform in the presence of versenate. The effect of various parameters such as pH, time of equilibration, solvent, anions, cations, etc., on the extraction coefficient value has been studied. The stoichiometry of the extracted species of 11 /Ag:1,2, 3-BT/ was obtained by the slope ratio method and substoichiometric extraction. Decontamination factors for most elements in the substoichiometric extraction of Ag/I/ were found to be higher than 10⁴.     

Alpha-activation analysis of nitrogen in boron-doped silicon single crystal

The rapid dissolution of silicon and the substoichiometric separation of¹⁸F were studied in order to determine nitrogen in a boron-doped silicon single crystal by activation analysis via¹⁵N(,n)¹⁸F. The silicon dissolution method was developed by using a nitric acid-based solution containing a known amount of ammonium fluoride, instead of hydrofluoric acid, as the¹⁸F carrier. The silicon could be dissolved to a depth of 100 m with a 10 mm Ø in 9 minutes. The conditions for¹⁸F steam distillation and substoichiometric precipitation as lanthanum fluoride were improved. 50% of the fluorine could be separated substoichiometrically even though the carrier amount was increased from 6–12 mmol to more than 16 mmol in order to add it to the dissolving solution. This dissolution method and improved substoichiometric separation were used to determine nitrogen in a boron-doped silicon single crystal. The nitrogen concentration was found to be less than the detection limit (50 ppb).     

3-Hydroxy-2-(2-thienyl)-4H-chromen-4-one as a new reagent for the extraction and trace determination of molybdenum(VI)

A simple, sensitive and selective method for the extraction and trace determination of molybdenum(VI) has been developed; it is based on its reaction with 3-hydroxy-2-(2-thienyl)-4H-chromen-4-one (HTC) in sulphuric acid medium. The 1:2 Mo (VI)-HTC yellow complex is quantitatively extractable into chloroform (_max 420 nm) and is stable for more than 4 h. The procedure eliminates the interference of a large number of metal ions and complexing agents. Beer's law is obeyed in the range of 0–2.85 g Mo/mL with a molar absorptivity, Sandell's sensitivity and standard deviation of 5.28×10⁴ L mol^–1 cm^–1, 0.0018 g Mo/cm² and ±0.0054, respectively. The method has successfully been used for the spectrophotometric determination of molybdenum in steel samples.     

Determination of polonium in aqueous media using metal-containing membranes

A rapid method has been developed for the determination of polonium in water. The samples with a volume of 0.25 to 4.0 1 were filtered at a flow rate of 2 to 3 1 h^–1 on a membrane filter impregnated with silver. Optimum conditions are 0.1M hydrochloric acid in the presence of 0.01M ascorbic acid. After the filtration the membranes are flushed, dried and measured for -activity. The detection limit for a 41 sample with a membrane diameter of 35 mm is lower corresponding to 1.5×10^–3 Bq.1^–1. The method permits activity measurement with an -radiometer or -spectrometer with an error less than 30% at a confidence level of 0.95.     

Comparative substoichiometric extraction of cadmium with potassium salts of ethyl,propyl, butyl,pentyl and benzyl xanthates

A comparative study of the extractability of cadmium with potassium salts of ethyl, propyl, butyl, pentyl and benzyl xanthates into chloroform and a mixture of 14 pyridine and ethyl acetate from pH 1–7 buffers and sodium formate media, respectively, has been carried out employing an accurate and highly sensitive substoichiometric radiochemical method. The effect of foreign ions on the extractability was studied. The method developed was utilized for the determination of cadmium content in standard as well as in geological water samples.     

Determination of rare earth elements in mineral raw materials and rare earth industry products by neutron activation analysis

To determine REE in mineral raw materials, high purity RE metals and their compounds, neutron activation analysis with extraction chromatographic REE separation has been developed. Combination of the developed RE extraction and separation procedures with subsequent -spectrometric analysis of the RE radionuclides allows to determine their content with the lower detection limit –10^–5–10^–8%. The relative standard deviation is 0.2–0.3.     

Solvent extraction of Co/III/ with 1, 2, 3-benzotriazole into n-butanol

A new and rapid method has been developed for the quantitative extraction of Co/III/ with 1, 2, 3-benzotriazole into n-butanol. The extraction coefficient value of Co/III/ between n-butanol and an aqueous 5% solution of 1, 2, 3-BT in 2M sodium acetate-acetic acid buffer showed a maximum value of E=280 at pH 8.5. The effect of various other parameters on the extraction coefficient of Co/III/ such as solvents, anions, cations etc. has also been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope-ratio method was found to be 12. The separation factors studied for most of the elements were found to be better than 10³.     

Substoichiometric radioactivation analysis for ytterbium

The substoichiometric separation of Yb(III) can be achieved by the extraction of a substoichiometric amount of thenoyltrifluoroacetone and an excess amount of phenanthroline in benzene. The appropriate pH range for the substoichiometric extraction is 6–8. The reproducibility of the substoichiometric extraction of Yb(III) is very good as RSD 1%. As an example, Yb in a manganese nodule is determined by the substoichiometry combined with the radioactivation analysis. The content of Yb is 17.63±0.23 g/g. The present procedure can be applied to the determination of other rare earth elements.     

Extraction spectrophotometric investigation of mixed ligand complex of molybdenum(V) with thiocyanate and 4-acetyl-2-(acetylamino)-5-dimethyl-Δ2-1,3,4-thiadiazole

A sensitive spectrophotometric method is developed for the determination of small amounts of molybdenum based on the extraction of molybdenum-thiocyanate-4-acetyl-2-(acetylamino)-5-dimethyl- ²-1,3,4-thiadiazole complex into chloroform from hydrochloric acid medium which is orange red in colour. The complex has an absorption maximum at 470 nm with a molar absorptivity of 2.01×10⁴l·mole^–1·cm^–1. Beer's law is valid over the concentration range 0.06–2.5 ppm of molybdenum with an optimum concentration range of 0.15–2.2 ppm. The ternary complex is stable for over one week at room temperature. Equilibrium shift method indicates 142 composition for molybdenum-thio-cyanate-4-acetyl-2-(acetylamino)-5-dimethyl- ²-1,3,4-thiadiazole complex. The effects of acidity, reagent concentrations, time, temperature and diverse ions upon the absorbance of the complex are critically assessed. This method has been used successfully for the determination of molybdenum in molybdenum steels.     

Bromate assay in water by inductively coupled plasma mass spectrometry combined with solid-phase extraction cartridges

Based on selective sorption of bromide, bromoacetic acids (BAA) and bromomethanes on solid-phase extraction (SPE) cartridges, a sensitive and convenient method was developed for the determination of bromate in waters by inductively coupled plasma mass spectrometry (ICP–MS). Dionex OnGuard Ag and reversed-phase (RP) cartridges were tested for retention characteristics for bromide, BAA and bromomethanes. When a sample acidified with nitric acid was passed through an RP cartridge, BAA and bromomethanes were retained, afterwards bromide was absorbed as a precipitate of silver bromide and bromate was unretained when the nearly neutral sample passed a combination of Ag and H cartridges. After SPE pretreatment the recovery of bromate was 96–106%, and bromide remaining in the aqueous phase was found to be less than 0.06 g L^–1 when the original bromide concentrations were less than 5 mg L^–1. Effectiveness of stacked Ag and H cartridges in removing bromide from chloride-containing samples was also examined. Common cations and other anions did not interfere with bromate determination. The detection limit for bromate is 57 ng L^–1. This method has been applied to analyse waters from various sources, and the recovery of the spiked bromate was in the range of 92–107%.     

Solvent extraction of thorium from nitric acid solutions using di-N-butyl sulfoxide (DBSO) in xylene

The extraction of thorium(IV) from nitric acid solutions by di-n-butyl sulfoxide (DBSO) in xylene has been investigated as a function of acid, extractant and the metal concentration. The effect of contact time and diverse ions on the extraction has been examined. Phosphate, fluoride, oxalate and perchlorate reduce the extraction to some extent. The extraction of other metal ions, especially impurities associated with thorium in ores, has been measured under optimised conditions selected for thorium extraction. Na(I), K(I), Ca(II), Sr(II), Mn(II), Fe(II), Ni(II), Zn(II), Pb(II), Al(III), Ti(IV) and Hf(IV) are not extracted. Among the stripping solutions employed for back-extraction, deionized water is found to be the best and more than 99% thorium can be back-extracted in three stages. The extracted species is supposed to be Th(NO₃)₄·2DBSO. The extraction is found to be almost independent of the thorium concentration in the range between 4.3·10^–4–4.3·10^–2M and inversely dependent upon the temperature. The values of thermodynamic functions H, G and S for extraction equilibrium have been evaluated to be –19.6±2.9 kJ·mole^–1, –18.1±2.0 kJ·mole^–1 and –5.0±2.9 J·mole^–1·K^–1, respectively.     

Solvent Extraction Separation of Th(IV) and U(VI) with PC-88A

Liquid-liquid extraction of Th(IV) and U(VI) has been investigated by commercial extractant PC-88A in toluene. The optimum conditions for extraction of these metals have been established by studying the various parameters like acid concentration/pH, reagent concentration, diluents and shaking time. The extraction of Th(IV) was found to be quantitative with 0.1–1.0M HNO₃ acid and in the pH range 1.0–4.0 while U(VI) was completely extracted in the pH range 1.0–3.5 with 2.5·10^–2M and 2.·10^–2M PC-88A in toluene, respectively. The probable extracted species have been ascertained by log D-log C plot as ThR₄·4HR and UO₂R₂·2HR, respectively. The method permits separation of Th(IV) and U(VI) from associated metals with a recovery of 99.0%.     

Thiazolylblue tetrazolium bromide — a new spectrophotometric reagent for determination of manganese

A method has been developed for the micro-determination of Mn(VII) by the selective extraction of the MnO₄ ^– anion with thiazolylblue tetrazolium bromide from acidic medium. The molar absorptivity of the complex is 1 × 10⁴lmol^–1cm^–1 at 250 nm and the system obeys Beer's law in the range 0.1–1.75 gml^–1 Mn(VII). The composition and stability of the complex are discussed. The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: extraction constantK _ex = 3.16 × 10⁴, distribution constantK _D = 21.85 and association constant =1.45 × 10³. Manganese(VII) was determined in soils and plants. The determination was carried out without preliminary separation of manganese.     

Extraction-spectrophotometric determination of iron with 2-(2′-benzothiazolylazo)-4,6-dimethylphenol

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(2-benzothiazolylazo)-4,6-dimethylphenol (BTADMP) from a pH 6.5 medium has been developed. The extracted 12 FeBTADMP complex species allow the determination of 4–30gmg of iron (=3.92×10⁴1·mol^–1·cm^–1 at 790 nm). The method is highly selective and has been applied to the determination of iron in polymineral-polyvitamin pharmaceutical products.     

Radiochemical studies on the extraction of arsenic(III) by trilaurylamine oxide and benzene from aqueous iodide solutions and its determination in water samples by spectrophotometry

An extraction system consisting of trilaurylamine N-oxide and benzene has been identified as a possible extractant for tracer arsenic (<10^–3 M) from hydrochloric or sulfuric acid solutions with or without iodide. Benzene alone is less efficient as an extractant for arsenic when compared with trilaurylamine oxide dissolved in benzene. The mechanism of extraction is attributed to the formation of hydrated AsCl₃, while the iodide complex is most probably AsI ₄ ^– . The role of the solvent and the other parameters affecting the extraction have been investigated. The results have been employed to determine arsenic in water samples by spectrophotometry using the molybdenum blue method. The extraction procedure was used for the analysis of 10 ml water samples containing 0.2–0.5 g of arsenic.     

3-Hydroxy-2-(2"-Thienyl)-4H-Chromon-4-one as a Spectrophotometric Reagent for the Trace Determination of Zirconium in an Aqueous Phase

A rapid, simple, selective, and sensitive method for the trace determination of zirconium has been developed based on the reaction of 3-hydroxy-2-(2"-thienyl)-4H-chromon-4-one in an hydrochloric acid medium to form a yellow–colored complex which is rendered water soluble by the micellar action of Triton X-100 and measured at 415 nm. Most of the metal ions do not interfere with the determination. Beer's law is obeyed in the concentration range 0–2.0 g/mL and the molar absorptivity of the complex is 2.73 × 10⁴L mol^–1cm^–1; Sandell's sensitivity is found to be 0.0034 g cm^–2. The method has been applied for the determination of zirconium in various samples, and satisfactory results have been obtained.