In situ infrared molecular detection using palladium-containing zeolite films

In situ IR detection of carbon monoxide in the presence of hydrocarbons (methanol and pentane) using Pd-containing zeolite thin films is reported. The thin films are prepared by spin coating deposition of nanosized LTL and BEA type zeolites suspensions; the palladium clusters are introduced in the nanosized zeolites by ion exchange followed by γ radiolysis of the coating suspensions. The Pd-containing zeolite films with a thickness of 200 nm are exposed to a single gas (either CO or hydrocarbons) or gas mixtures in the presence of water (100 ppm), and the IR spectra are collected continuously at 25, 75, and 100 °C. The fast recognition of very low concentrations of CO (2-100 ppm) in the presence of highly concentrated vapors of methanol or pentane (400-4000 ppm) with the Pd-containing zeolite films is demonstrated. The detection of CO and hydrocarbons is instant, which is a function of the low thickness of the films, small size of the individual zeolite crystals, and regular size and high stability of the Pd clusters in the zeolite films. The heat of adsorption for all experiments is similar (15 kJ.mol(-1)), which is explained with weak interactions between the carbon monoxide and palladium clusters in the zeolite films at temperatures below 100 °C. The nanosized zeolites with homogeneously distributed Pd clusters deposited in thin films demonstrate high molecular recognition capacity toward low concentrations of carbon monoxide under real environmental conditions, i.e., in the presence of water and hydrocarbons.     

Luminescence investigation on ultraviolet-emitting rare-earth-doped phosphors using synchrotron radiation

Three series of new ultraviolet-emitting Ca(9)Y(PO(4))(7):Ln(3+) (Ln = Ce, Gd, Pr) phosphors were synthesized, and their luminescence was investigated. Under vacuum ultraviolet excitation Ca(9)Y(PO(4))(7):Ce(3+) phosphors emit UVA light with one broad emission centered at 346 nm, on account of the 5d(1) → 4f(1) transition of Ce(3+) ions; the optimal doping concentration of these phosphors is 0.2 mol. Ca(9)Y(PO(4))(7):Gd(3+) phosphors show a strong 4f(7) → 4f(7) transition and a sharp UVB emission band at 312 nm; the optimal doping concentration of these phosphors is 0.7 mol. The PL spectra of Ca(9)Y(PO(4))(7):Pr(3+) show two broad UVC emission bands centered between 230 and 340 nm, owing to the 4f(1)5d(1) → 4f(2) transition of Pr(3+) ions; the optimal doping concentration of these phosphors is 0.2 mol. Under 172 nm excitation, we found that the luminescence intensity of the UVA-emitting Ca(9)Y(PO(4))(7):0.2Ce(3+) is 0.3675 times that of BaSi(2)O(5):0.05Pb(2+), that of the UVB-emitting Ca(9)Y(PO(4))(7):0.7Gd(3+) is 1.7 times that of YAl(3)(BO(3))(4):0.25Gd(3+), and that of the UVC-emitting Ca(9)Y(PO(4))(7):0.2Pr(3+) is 1.5 times that of LaPO(4):0.1Pr(3+). The thermal stability investigation indicated that the luminescence decay was only 9.2%, 18.2%, and 10.3% for Ca(9)Y(PO(4))(7):0.2Ce(3+), Ca(9)Y(PO(4))(7):0.7Gd(3+), and Ca(9)Y(PO(4))(7):0.2Pr(3+) at 250 °C relative to that at ambient temperature, respectively. The Ca(9)Y(PO(4))(7):Ln(3+) (Ln = Ce, Gd, Pr) phosphors exhibit high emission efficiency and excellent thermal stability.     

Dynamical SAXS investigations on oriented polyethylene by synchrotron radiation: reversible variation of superstructure

Using the synchrotron radiation SAXS facilities at DESY, the reversible variation of the small angle diagram of LDPE during heating and cooling cycles was measured. There are changes of the intensity, location and widths of the small angle reflections. The experimental results and a qualitative discussion are given.     

Towards biochemical reaction monitoring using FT-IR synchrotron radiation

A lab-on-a-chip device made of CaF2 windows and SU-8 polymer was used for fluid lamination to achieve rapid mixing of two streamlines with a cross section of 300 x 5 microm each. Time resolved measurements of the induced chemical reaction was achieved by applying constant feeding low flow rates and by on-chip measurement at defined distances after the mixing point. Synchrotron IR microscopic detection was employed for direct and label-free monitoring of (bio)chemical reactions. Furthermore, using synchrotron IR microscopy the measurement spot could be reduced to the diffraction limit, thus maximizing time resolution in the experimental set-up under study. Based on computational fluid dynamic simulations the principle of the set-up is discussed. Experimental results on the basic hydrolysis of methyl chloroacetate proved the working principle of the experimental set-up. First results on the interaction between the antibiotic vancomycin and a tripeptide (Ac2KAA) involved in the build up of the membrane proteins of gram-positive bacteria are presented.     

In situ UV-Vis and ex situ IR spectroelectrochemical investigations of amorphous and crystalline electrochromic Nb2O5 films in charged/discharged states

Niobium oxide (Nb₂O₅) films and powders have been obtained via the sol-gel route from an NbCl₅ precursor. XRD spectra revealed that films with pseudohexagonal (TT-phase) and orthorhombic (T-phase) structure were formed at 500  °C and 800  °C, respectively, while at 300  °C films were amorphous. Infrared (IR) and Raman spectra of powders and films of Nb₂O₅ in different polymorphic forms were detected, and vibrational band assignments were made. Electrochromic properties of amorphous films and films with the TT-phase were established from in situ ultraviolet visible (UV-Vis) spectroelectrochemical measurements and correlated with ex situ IR transmission spectra of charged films. Ex situ IR spectra revealed that charging of amorphous films is accompanied by variations of the Nb-O stretching mode intensity, while, for films with the TT- and T-phase, splitting of the Nb₃-O stretching modes and the appearance of polaron absorption were noted with Li⁺ ion insertion. Ex situ X-ray diffraction (XRD) spectra of charged films with the TT-phase showed changes of the unit cell dimensions with charging. The influence of the polaron absorption on the ex situ near-grazing incidence angle (NGIA) IR reflection-absorption spectra of charged/discharged films is discussed in detail. Received: 21 August 1997 / Accepted: 9 October 1997     

In situ neutron powder diffraction studies of lithium-ion batteries

Neutron powder diffraction (NPD) offers many advantages in the analysis of battery materials. Understanding the relationship between the structural transformations of electrode materials and their electrochemical performance within lithium-ion batteries is crucial for further development of these technologies and is the overall goal of in situ NPD experiments. In this work, we present NPD data of electrode materials within batteries that are collected in situ during electrochemical cycling, including the commercially available materials LiCoO₂, LiMn₂O₄, LiFePO₄ and graphite and the YFe(CN)₆ and FeFe(CN)₆ materials that are not commercially available. Using these data, we illustrate the experimental approach and requirements for the collection of in situ NPD data of sufficient quality for detailed structural analyses of the electrode components of interest within batteries.     

In situ growth of CuS thin films on functionalized self-assembled monolayers using chemical bath deposition

Nano-structured CuS thin films were deposited on the functionalized -NH(2)-terminated self-assembled monolayers (SAMs) surface by chemical bath deposition (CBD). The deposition mechanism of CuS on the -NH(2)-terminated group was systematically investigated using field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscope (XPS), UV-vis absorption. The optical, electrical and photoelectrochemical performance of CuS thin films incorporating with the X-ray diffraction (XRD) analysis confirmed the nanocrystalline nature of CuS with hexagonal crystal structure and also revealed that CuS thin film is a p-type semiconductor with high electrical conductivity (12.3Ω/□). The functionalized SAMs terminal group plays a key role in the deposition of CuS thin films. The growth of CuS on the varying SAMs surface shows different deposition mechanisms. On -NH(2)-terminated surfaces, a combination of ion-by-ion growth and cluster-by-cluster deposition can interpret the observed behavior. On -OH- and -CH(3)-terminated surfaces, the dominant growth mechanism on the surface is cluster-by-cluster deposition in the solution. According to this principle, the patterned CuS microarrays with different feature sizes were successfully deposited on -NH(2)-terminated SAMs regions of -NH(2)/-CH(3) patterned SAMs surface.     

In situ observation of the water distribution across a PEFC using high resolution neutron radiography

The water distribution across the membrane electrolyte assembly (MEA) of a working polymer electrolyte fuel cell (PEFC) was observed in situ using neutron radiography. In order to resolve the distribution between the different layers of the MEA, in plane imaging (cell membrane parallel to the beam) was used. Unprecedented spatial resolution for neutron radiography was obtained using a new detector system available at PSI combined with specific anisotropic resolution enhancement methods. A detrimental effect on performance of excessive water content in the cathode GDL was observed. Depending on the operating condition, a strong separation of the water content between ribs and channel was observed, particularly in the cathode GDL.     

Concept for a single-shot mid-infrared spectrometer using synchrotron radiation

Several attempts have been made to extend time-resolved mid infrared spectroscopy to higher time resolution. Such methods are either limited to specific samples that are cyclic and therefore allow the reaction under investigation to be repeated multiple times in the same manner, or they lack spectral resolution or sufficient signal-to noise ratio. Here, we report on a single-shot spectrometer concept which overcomes the aforementioned limitations utilizing fast linear detector arrays and highly brilliant infrared synchrotron radiation. The spectrometer may find applications, beside others, for the investigation of irreversible cascades of structural alterations in proteins.     

Angle-resolved X-ray fluorescence spectrometry using synchrotron radiation at ELSA

Measurements on the centroid depth of ion-implanted phosphorus-in-silicon specimen by the method of angle-resolved, self-ratio X-ray fluorescence spectrometry (AR/SR/XFS) have been carried out using white synchrotron radiation (SR). The measurements were performed using a modified wavelength-dispersive fluorescence spectrometer. Problems due to the use of SR, like carbonaceous specimen contamination and sample heating were overcome by flooding the specimen chamber with helium and by pre-absorbing the non-exciting parts of the incident SR with suitable filters, respectively. The decaying primary intensity was monitored by measuring the compensation current of the photoelectrons emitted from a tungsten wire stretched across the primary beam. Results have been obtained for specimen with dose density levels of 10¹⁶ cm^–2 and 3×10¹⁵ cm^–2.     

X-ray scattering of non-crystalline biological systems using synchrotron radiation

This tutorial review gives an overview of the progress in the study of non-crystalline systems by X-ray scattering and closely related imaging techniques, made possible by advances in synchrotron radiation sources and instrumentation. A brief introduction to the techniques is followed by the presentation of a variety of recent applications to problems in fundamental and applied research in biochemistry and biophysics and food and pharmaceutical technology.     

Photoionization mass spectrometry of molecular clusters using synchrotron radiation

The photoionization and dissociative ionization of molecular aggregates using synchrotron radiation is reported. The main objective of the review is to consider the intracluster relaxation processes after ionization. For hydrogen-bonded systems proton transfer is dominant. For small clusters (n<4) appearance potentials, ionization potentials, absolute proton affinities, proton solvation energies and intermolecular bond energies in the ionic clusters are deduced. For van der Waals aggregates proton transfer can also be used to characterize the intermolecular bond in the ionic cluster. Aggregates of CH₄, SiH₄, CH₃F show proton transfer in contrast to simple aromatic compounds, which reveal no proton transfer. From the fragmentation pattern and appearance potentials relaxation by intracluster ion molecule reactions is discussed. In heterogeneous clusters intracluster Penning ionization is observed. The shift of the charge transfer resonances depends on the π-electron density in the aromatic system. The width and spectral position of these resonances are influenced by the cluster size.     

Non-destructive depth profile analysis using synchrotron radiation excited XPS

We have used synchrotron radiation as excitation source in an X-ray photoelectron spectroscopy (XPS) experiment to analyse surface-near element depth profiles non-dectructively. By tuning the photon energy one can vary the kinetic energy of the photoelectrons and in turn the information depth of the measurement. To quantify the sample geometry (e.g. layer thicknesses) model calculations similar as for angle-resolved XPS (ARXPS) measurements are necessary. We have successfully applied this technique to several samples. We will show how to calculate the relative intensities of the peaks, using photoionization cross sections and an experimentally determined analyzer transmission function and the procedure to quantify the geometry for a model sample: natively oxidized Ta covered by carbon contamination. At Sn-doped indium oxide samples we found a sub-monolayer of segregated Sn at the surface which was expected from previous investigations.     

In situ neutron activation analysis of and the neutron capture cross-section for90Sr+

Neutron activation analysis has been investigated as an in situ method for determination of⁹⁰Sr. The thermal neutron capture cross-section for the⁹⁰Sr(n, γ)⁹¹Sr reaction has been measured to be 14.0±2.4 mb which is in disagreement with the currently accepted literature value. The suitability of this reaction and the fast neutron reactions⁹⁰Sr(n, p)⁹⁰Rb and⁹⁰Sr(n, α)⁸⁷Kr, for the in situ determination of⁹⁰Sr is discussed.     

Single-photon double ionization of mercury clusters using synchrotron radiation

Single-photon doublet-ionization experiments have been carried out on mercury resulting in the formation of doubly charged clusters. The efficiency is very high and similar to that obtained by electron impact. The mechanism of double ionization is discussed and our results favor a two-step process both in photon and electron impact ionization.     

Some investigations on the post radiation grafting of acrylamide onto polyethylene films

A study has been made on the post radiation grafting of aqueous acrylamide onto low density polyethylene film. It was found that the addition of 0.05 wt % Mohr's salt reduced effectively the homopolymerization of acrylamide and the grafting process was successfully achieved. The dependence of the grafting rate on the preirradiation dose and monomer concentration was found to be of 1.43 and 1.4 order, respectively. The overall activation energy for the graft polymerization was found to be 13.5 and 1.95 Kcal/mol below and above 45°C, respectively. Some properties of the graft copolymer such as swelling behaviour, electrical conductivity, and reverse osmosis desalination of saline water (water flux and salt rejection), were also investigated and the possibility of its uses in the practical applications was discussed.     

Deuteration of molecules for neutron reflectometry on organic light-emitting diode thin films

Deuterated forms of aromatic charge transporting heterocycles 2 and 3 used in organic light-emitting diodes have been produced by hydrothermal reactions, catalyzed by Pt/C or Pd/C. Comprehensive analysis by mass spectroscopy, ¹H, ²H and ¹³C NMR enables determination of the overall quantity of D atoms present, as well as the level of deuteration at each molecular site. The roles of solubility and steric availability in deuteration are discussed in the light of these results. Neutron reflectometry indicates excellent scattering contrast between protonated and deuterated forms of these molecules, with nanoscale thin films showing the same density as in their bulk molecular forms. Although used for morphological studies of thin films typically used in OLEDs, the synthetic and analysis methods described here are generic and suitable for deuteration of other conjugated aromatic heterocycles and other optoelectronic devices.