Enhanced mechanical behaviour of lead zirconate titanate piezoelectric composites incorporating zinc oxide nanowhiskers

This paper reports that the lead zirconate titanate （PZT） piezoelectric composites incorporating zinc oxide nanowhiskers （ZnOw） were prepared by the conventional solid state processing. The whisker-dispersed PZT composites （PZT/ZnOw） presented a significant enhancement in the mechanical properties such as Young＇s modulus, tensile strength and compressive strength. Especially, the compressive strength increased from 153 MPa for the PZT to 228 MPa for the PZT/ZnOw composites. The reinforcement mechanism in strength of the composites was discussed. The me- chanical quality factors of the PZT/ZnOw composites increased considerably, while the piezoelectric constants and electromechanical coupling coefficient decreased slightly. The composites with good electrical and excellent mechanical properties are promising for further applications.     

Effect of Dy substitution on magnetic properties and magnetocaloric effects of Tb6Co1.67Si3 compounds

The magnetic and magnetocaloric properties of(Tb1-xDyx) 6 Co 1.67 Si 3(0 ≤ x ≤ 0.8) have been experimentally investigated.The compounds exhibit a Ce6Ni2Si3-type hexagonal structure and undergo a second-order magnetic transition.The Curie temperature decreases from ～ 187 K to 142 K as the content of Dy grows from 0 to 0.8.The maximal magnetic entropy change,for a field change of 0-5 T,varies between ～ 6.2 and ～ 7.4 J/kg.K,slightly decreasing when Dy is introduced.The substitution of Dy leads to a remarkable increase in refrigeration capacity(RC).A large RC value of ～ 626 J/kg is achieved for x = 0.4 under a field change of 0-5 T.     

First-principles calculations for elastic properties of rutile TiO2 under pressure

This paper studies the equilibrium structure parameters and the dependences of the elastic properties on pressure for rutile TiO2 by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of density functional theory. The obtained equilibrium structure parameters, bulk modulus B0 and its pressure derivative B′0 are in good agreement with experiments and the theoretical results. The six independent elastic constants of rutile TiO2 under pressure are theoretically investigated for the first time. It is found that, as pressure increases, the elastic constants C11, C33, C66, C12 and C13 increase, The variation of elastic constant C44 is not obvious and the anisotropy will weaken.     

Spontaneous magnetization and resistivity jumps in bilayered manganite （La0.8Eu0.2）4/3Sr5/3Mn2O7 single crystals

Owing to the inhomogeneous state resulting from the doping of a small number of Eu ions into Laa/3Sr5/3Mn2O7, from the resulting single crystal （La0.8Eu0.2）a/3Sr5/3Mn2O7 we have observed the magnetization jump, the resistivity jump, as well as the relaxation phenomena. For （Lao.sEuo.2）a/3Sr5/3Mn2O7, it has a very delicate ground state due to the interplays among spin, charge, orbital, lattice degrees of freedom. Consequently, the magnetization state is sensitive to temperature, magnetic field, as well as time. Meanwhile, the evolution of the magnetization with time shows a spontaneous jump when both the temperature and the magnetic field are constant. Similar step-like behaviours are also observed in resistivity. All these results suggest that Eu doping can greatly modulate the physical properties of Laa/3Sr5/3Mn2O7 and cause such interesting behaviours.     

Electron spin resonance study of the Ba-doping manganite Nd0.5Sr0.5MnO3

We have performed magnetization measurements and electron spin resonance （ESR） on polycrystalline manganites of Nd0.5Sr0.5-xBaxMnO3 （x = 0.1）. Phase separation and phase transitions are observed from the susceptibility and the ESR spectra data. Between 260 K （～ Tc） and 185 K （～ TN）, the system coexists of the paramagnetic phase and the ferromagnetic （FM） phase. Between 185 K and 140 K, the system coexists of the FM phase and the antiferromagnetic （AFM） phase. These results indicate that the system has a very complex magnetic state due to the origin of the instability stemming from manganite Nd0.5Sr0.4Ba0.1MnO3 by partially substituting the larger Ba^2＋ ions for the smaller Sr^2＋ ions.     

Magnetic properties and magnetocaloric effect in NdxLa1-xFe11.5Al1.5 compounds

Effects of Nd-doping on the magnetic properties and magnetocaloric effects （MCEs） of NdxLa1-xFe11.5Al1.5 have been investigated. Substitution of Nd leads to a weakening of the antiferromagnetic （AFM） coupling and an enhancement of the ferromagnetic （FM） coupling. This in turn results in a complex magnetic behaviour for Nd0.2La0.8Fe11.5Al1.5 characterized by the occurrence of two phase transitions at ～188 K （PM AFM） and ～159 K （AFM-FM）. As a result, a table-like MCE （9 J/kg.K） is found in a wide temperature range （160-185 K） for a field change of 0-5T around the transition temperature, as evidenced by both the magnetic and calorimetric measurements. Based on the analysis of low-temperature heat capacity, it is found that the AFM-FM phase transition modifies the electron density significantly, and the major contribution to the entropy change comes from the electronic entropy change.     

Structures and electronic properties of SimN8-m（0 〈 m 〈 8） clusters： a density functional theory study

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.     

First-principles study of structures and electronic properties of cadmium sulfide clusters

The lowest-energy structures and the electronic properties of CdnSn （n = 1 - 8） clusters have been studied by using denslty-functional theory simulating package DMol^3 in the generalized gradient approximation （GGA）. The ring-like structures are the lowest-energy configurations for n = 2, 3 and the three-dimensional spheroid configurations for n = 4 - 8. The three-dimensional structures may be considered as being built from the Cd2S2 and Cd3S3 rings. Compared to the previous reports, we have found the more stable structures for CdnSn（n = 7, 8）. Calculations show that the magic numbers of CdnSn （n = 1-8） clusters are n = 3 and 6. As cluster size increases, the properties of CdnSn clusters tend to bulk-like ones in binding energy per CdS unit and Mulliken atomic charge, obtained by comparing with the calculated results of the wurtzite and zinc blende CdS for the same simulating parameters.     

Superconductivity without dependence on valenceelectron density in Zn doped YBCO systems

This paper reports that the YBa2Cu3-xZnxO7-δ （x = 0-0.4） samples are researched by means of x-ray diffraction, calculations of binding energy, the positron experiments and variations of oxygen content. The results of simulated calculations, positron experiments and variations of oxygen content support the existence of cluster effect. Moreover, it is concluded that the cluster effect is an important factor on suppression of high-Tc cuprate superconductivity and the Tc does not depend on the density of valence electron directly.     

First-principles investigation of BAs and BxGa1-xAs alloys

First-principles investigation of BAs and BxGa1-xAs alloys Using first-principles calculations in the generalized gradient approximation, the electronic properties of BAs and BxGa1-xAs alloys are studied. At the Brillouin-zone centre, the lowest conduction band is the three-degenerate p-like Г15c state rather than s-like Г1c state, and the conduction band minimum （CBM） is along the A line between the Г and X points-at approximately 11/14（1,0,0）2π/a. With boron content at 0%-18.75%, BxGa1-xAs alloys have a small （2.6 eV） and relatively composition-independent band-gap bowing parameter, the band-gap increases monotonically by -18meV/B% with increasing boron content. In addition, the formation enthalpies of mixing for BxGa1-xAs alloys with boron content at 6.25% and 12.5% are calculated, and the large formation enthalpies may explain the difficulty in alloying boron to GaAs.     

Formation and photoluminescence properties of boron nanocones

This paper reports that a simple chemical vapour deposition method has been adopted to fabricate large scale, high density boron nanocones with thermal evaporation of B/B2O3 powders precursors in an Ar/H2 gas mixture at the synthesis temperature of 1000-1200℃. The lengths of boron nanocones are several micrometres, and the diameters of nanocone tops are in a range of 50-100 nm. transmission electron microscopy and selected area electron diffraction indicate that the nanocones are single crystalline α-tetragonal boron. The vapour liquid solid mechanism is the main formation mechanism of boron nanocones. One broad photolumineseence emission peak at the central wavelength of about 650 nm is observed under the 532 nm light excitation. Boron nanocones with good photoluminescence properties are promising candidates for applications in optical emitting devices.     

Study of valence intersubband absorption in tensile strained Si/SiGe quantum wells

The hole subband structures and effective masses of tensile strained Si/Sil-yGey quantum wells are calculated by using the 6 × 6 k·p method. The results show that when the tensile strain is induced in the quantum well, the light-hole state becomes the ground state, and the light hole effective masses in the growth direction are strongly reduced while the in-plane effective masses are considerable. Quantitative calculation of the valence intersubband transition between two light hole states in a 7nm tensile strained Si/Si0.55Ge0.45 quantum well grown on a relaxed Si0.5Ge0.5 （100） substrates shows a large absorption coefficient of 8400 cm^-1.     

Elastic collisions of sulfur and hydrogen in their ground states at low temperatures and spectroscopic parameters of SH（X^2∏） radical

This paper constructs the interaction potential of the SH（X^2∏） radical by using the coupled-cluster singlesdoubles-approximate-triples theory combining the correlation-consistent quintuple basis set augmented with the diffuse functions, aug-cc-pV5Z, in the valence range. Employing the potential, it accurately determines the spectroscopic parameters. The present De, Re, ωe, ωeχe, ae and Be values are of 3.7767eV, 0.13424nm, 2699.846 cm^-1, 47.7055 cm^-1, 0.2639cm^-1 and 9.4414 cm^-1, respectively, which are in excellent agreement with those obtained from the measure- ments. A total of 19 vibrational states has been found when J = 0 by solving the radial SchrSdinger equation of nuclear motion. The complete vibrational levels, classical turning points, initial rotation and centrifugal distortion constants when J = 0 are reported for the first time, which are in good accord with the experimental results. The total and various partial-wave cross sections are computed for the elastic collisions of sulfur and hydrogen in their ground states at low temperatures when two atoms approach each other along the SH（X^2∏） potential energy curve. Over the impact energy range from 1.0×10^-11 to 1.0×10^-4 a.u., eight shape resonances have been found in the total elastic cross sections. For each shape resonance, the resonant energy is accurately calculated. Careful investigations have pointed out that these resonances result from the 1 = 0, 1, 2, 3, 4, 6, 7, 8 partial-wave contributions.     

A first-principles study of the catalytic mechanism of the dehydriding reaction of LiNH2 through adding Ti catalysts

Experiments on a ball milled mixture with a 1:1 molar ratio of LiNH2 and LiH with a small amount(1 mol %) of Ti nano,TiCl3 and TiO nano 2 have revealed a superior catalytic effect on Li-N-H hydrogen storage materials.In the x-ray diffraction profiles,no trace of Ti nano,TiCl3 and TiO nano 2 was found in these doped composites,by which we deduced that Ti atoms enter LiNH2 by partial element substitution.A first-principles plane-wave pseudopotential method based on density functional theory has been used to investigate the catalytic effects of Ti catalysts on the dehydrogenating properties of LiNH2 system.The results show that Ti substitution can reduce the dehydrogenation reaction activation energy of LiNH2 and improve the dehydrogenating properties of LiNH2.Based on the analysis of the density of states and overlap populations for LiNH2 before and after Ti substitution,it was found that the stability of the system of LiNH2 is reduced,which originates from the increase of the valence electrons at the Fermi level(EF) and the decrease of the highest occupied molecular orbital(HOMO)-lowest unoccupied molecular orbital(LUMO) gap(△EH-L) near E F.The catalytic effect of Ti on the dehydrogenating kinetics of LiNH2 may be attributed to the reduction of average populations between N-H per unit bond length(nm-1),which leads to the reduction of the chemical bond strength of N-H.     

Infrared-to-visible and infrared-to-violet upconversion fluorescence of rare earth doped LaF3 nanocrystals

This paper reports that hexagonal-phase LaF3：Yb0.20^3＋,Er0.02^3＋ and LaF3：Yb0.20^3＋, Tm0.02^3＋ nanocrystals （NCs） were synthesized via a hydrothermal method. The transmission electron microscopy, selected area electron diffraction, powder x-ray diffraction, and thermogravimetric analysis are used to characterize the NCs. Under 980 nm excitation, the Yb^3＋/Er^3＋ and Yb^3＋/Tm^3＋ codoped NCs colloidal solutions present bright green and blue upconversion fluorescence, respectively. These NCs show efficient infrared-to-violet and infrared-to-visible upconversion. The upconversion fluo- rescence mechanisms of LaF2：Yb0.20^3＋, Er0.02^3＋ and LaF3：Yb0.20^3＋,Tm0.02^3＋ NCs are investigated with a 980-nm diode laser as excitation source.     

Stability of small Ni-Ti bimetallic clusters studied by density functional theory

The low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small Ni$_{n}$Ti$_{n}$ ($n=1$--$6$) and Ni$_{m}$Ti$_{n}$ ($1 \le n \le 4$, $1 \le m \le 4$, $n \ne m$) clusters are investigated by performing all-electron calculations based on density functional theory. Ground states and several isomers near the ground states are determined for these clusters. The results indicate that the growth of small Ni$_{m}$Ti$_{n}$ clusters prefers to form rich Ti--Ni and Ti--Ti bonds. When the percentage of titanium atoms is significantly greater than that of nickel atoms, the nickel atoms are most frequently found above the surface; in contrast, the titanium atoms prefer the bridging sites. A M\"{u}lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.http://cpb.iphy.ac.cn/CN/10.1088/1674-1056/19/4/043102https://cpb.iphy.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=111644NimTin;clusters;lowest-energy;structure;electronic;and;magnetic;propertiesThe low-energy structures and the electronic and the magnetic properties of small Nin Tin(n = 1-6) and Ni m Ti n(1 ≤ n ≤ 4,1 ≤ m ≤ 4,n ≠ m) clusters are investigated by performing all-electron calculations based on density functional theory.Ground states and several isomers near the ground states are determined for these clusters.The results indicate that the growth of small Ni m Ti n clusters prefers to form rich Ti-Ni and Ti-Ti bonds.When the percentage of titanium atoms is significantly greater than that of nickel atoms,the nickel atoms are most frequently found above the surface;in contrast,the titanium atoms prefer the bridging sites.A Mu¨lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.     

Low-field electron emission from pinaster-like MoO2 nanoarrays as two-stage emitters

Low-field electron emission is obtained from the pinaster-like MoO2 nanoarrays. The turn-on field of the pinasterlike MoO2 nanoarrays is found to be as low as 2.39 V/μm with the current density of 10μA/cm2. The enhancement factor is extracted to be 3590 from the Fowler-Nordheim plot. These excellent emission properties are attributed to the special structure of the pinaster-like MoO2 nanoarrays and confirmed by the calculation in the frame of the two -stage model. Our results show that the pinaster-like MoO2 nanoarrays are promising candidate in realizing field emission displays.     

Single crystalline boron carbide nanobelts: synthesis and characterization

This paper reports that the large-scale single crystalline boron carbide nanobelts have been fabricated through a simple carbothermal reduction method with B/B2O3/C/Fe powder as precursors at 1100℃. Transmission electron microscopy and selected area electron diffraction characterizations show that the boron carbide nanobelt has a B4C rhomb-centred hexagonal structure with good crystallization. Electron energy loss spectroscopy analysis indicates that the nanobelt contains only B and C, and the atomic ratio of B to C is close to 4：1. High resolution transmission electron microscopy results show that the preferential growth direction of the nanobelt is [101]. A possible growth mechanism is also discussed.     

Effects of exchange interaction and spin-fluctuation on the magnetic and magneto-optic properties of NdF3

The exchange interaction between the electrons in the different magnetic ions and the spin-fluctuation of the magnetic ions exist in the paramagnetic media NdF3. The exchange interaction between the electrons in the different magnetic ions may be equivalent to an effective field Hin that is in direct proportion to the magnetization M. The spin-fluctuation of the magnetic ions leads the coefficient of the effective field to vary with temperature. The effective field is given as Hin = -（0.75 ＋ 0.22T） × 10^-5M in NdF3. When the secondary crystal field effect is taken into account, the magnetic susceptibility and Verdet constant are calculated for NdF3 by means of the effective field Hin and the applied field He. The calculated results are in agreement with the measured ones.     

Effect of the stoichiometry on the electronic structure of the Ni（111）/α-Al2O3（0001） interface： a first-principles investigation

In this paper first-principles calculations of Ni（111）/α-Al2O3（0001） interfaces have been performed, and are compared with the preceding results of the Cu （111）/α-Al2O3（0001） interface [2004 Phil. Mag. Left. 84 425]. The AI- terminated and O-terminated interfaces have quite different adhesion mechanisms, which are similar to the Cu（111）/α Al2O3（0001） interface. For the O-terminated interface, the adhesion is caused by the strong O-2p/Ni-3d orbital hybridization and ionic interactions. On the other hand, the adhesion nature of the Al-terminated interface is the image-like electrostatic and Ni-Al hybridization interactions, the latter is substantial and cannot be neglected. Charge transfer occurs from Al2O3 to Ni, which is opposite to that in the O=terminated interface. The charge transfer direction for the Al-terminated and O-terminated Ni（111）/α-A1203（0001） interfaces is similar to that in the corresponding Cu（111）/α- Al2O3（0001） interface, but there exist the larger charge transfer quantity and consequent stronger adhesion nature, respectively.