金属钯催化分子间的非活性烯烃的烯丙位C—H的需氧氧化胺化反应：高效合成烯丙基胺衍生物的新方法

非活性烯烃的高效选择性官能化反应是非常重要的有机反应之一,其中烯烃的烯丙位C—H键的直接官能化由于在保留烯烃的同时引入新的官能团而最近备受关注．金属钯催化烯烃的该反应已有报道,但是这些反应局限于烯烃与酸反应得到烯丙基酯类化合物,而且反应中利用了大量的无机或有机氧化剂来氧化Pd（O）到Pd（Ⅱ）从而实现金属钯的氧化循环,     

钯催化的Grignard型反应

对钯催化的Grignard类型反应作了论述.总结了钯催化的有机卤化物或炔烃与C=O键或C≡N键的二组分反应和有机卤化物、烯烃或炔烃与C=O键或C≡N键的三组分反应.在这些反应中的C-Pd键是通过C-X键与Pd(0)的氧化加成或通过碳碳双键或叁键的碳/亲核钯反应生成,C-Pd键与C=O键或C≡N键之间的反应一般为分子内反应.当然,人们也观察到了通过芳香C-H键活化产生的芳基碳钯键与腈基的分子间反应.在这些反应中催化剂的再生是关键.本工作对反应的机理也作了一些探讨.     

不饱和烃杂钯化反应在有机合成中的应用

不饱和烃杂钯化反应是合成高活性反应中间体烷基钯(II)和烯丙基钯(II)重要的途径. 这些钯的络合物, 在合适的条件下能被各种亲核试剂例如烯丙基卤、一氧化碳、不饱和烃、有机硼、有机锡等捕获. 经过一系列插入及消除反应, 能够有效地构建多种生理活性药物、有机功能分子以及重要合成骨架. 近年来, 引起了有机合成工作者的兴趣. 在这里, 对杂钯化最新进展进行综述.     

钯催化惰性碳-氢键胺化反应研究进展

胺化反应是有机化学中最重要的反应之一,近年来,过渡金属催化的碳-氢键胺化反应已经成为合成有机胺化物的重要方法.本文综述了钯催化碳-氢键胺化反应的研究进展,按照底物类型和所活化碳-氢键的类型进行分类,并对该领域目前存在的局限性和未来发展进行了总结和展望.     

钯催化卤代芳烃的胺化反应的研究进展

钯催化卤代芳烃的胺化是合成芳胺化合物的重要方法,综述了近年来钯催化卤代芳烃与胺等不同含氮化合物的胺化反应研究进展,重点讨论了钯催化剂配体的结构、反应物比例、溶剂及温度等因素对反应的影响.     

氟烷基化和氟烷氧基化的研究 钯(O)催化氟烷基碘对烯烃的加成反应

氟烷基碘通过光、热、自由基引发剂引发对烯烃加成。1984年Ojima等报道过渡金属羰基络合物也能催化氟烷基碘对重键的加成。我们前已报道铜在乙酐、二缩二乙二醇二甲醚(DG)或乙腈中通过单电子转移引发氟烷基碘与烯烃、炔烃反应,反应条件温和产率较高。但钯是否也能催化氟烷基碘与烯烃反应仍属未知。本文首次报道四(三苯基膦)合钯(O)催化氟烷基碘对烯烃的加成反应。     

钯催化烯丙基磺酰胺的分子内胺氟化反应

报道了钯催化的非活性烯烃的胺氟化反应,在酸性添加剂HOAc的作用下,反应以较好的收率和区域选择性地得到6-endo环合产物,实现了氟代的环状磺胺类产物的有效合成.     

基于Heck插入策略的钯催化烯烃与α-溴代烷基羰基化合物的烯烃氧化双官能化反应合成吲哚2-酮类化合物

正钯催化Heck偶联反应一般首先经过插入和加成步骤生成含C—Pd键中间体A,最后通过β-H消除来实现钯催化循环.如何利用中间体A中的C—Pd键引入新官能团是有机合成研究难点之一.目前有两种策略:(1)零价钯催化体系下,烯烃与卤代烃反应生成含C—Pd键中间体A,然后与亲核试剂(芳基硼酸,Cl-,CO,烯烃和炔烃等)实现烯烃双官能团化反应;(2)两价钯/氧化剂催化体系下,烯烃与有机金属试剂反应生成含C—Pd键中间体A,然后与亲核试     

钯催化卤代芳烃的胺化反应研究

钯催化卤代芳烃胺化是形成Car-N的重要方法.配体的发展扩展了底物的适用范围, 提高了反应的选择性,实现了廉价易得的氯代芳烃的胺化,弱碱的使用提高了官能团的兼 容性,因此Pd催化芳胺化广泛应用于合成芳胺类化合物.本文以卤代芳烃为线索,对钯催化偶联胺化反应的研究进展进行了综述和展望.     

钯催化的芳基C-H键三氟甲硫基化反应

报道了二价钯催化的高选择性芳基C-H键的三氟甲硫基化反应,其中稳定的三氟甲硫基苯胺2a作为三氟甲硫基试剂,醋酸钯作为催化剂,苯甲酰氯和醋酸银作为添加剂,反应在DMF中120℃条件下实现的.各种取代的吡啶都可以作为该反应的导向基团.反应中苯甲酰氯的添加对活化三氟甲硫基苯胺2a起着关键作用.该反应为合成邻位三氟甲硫基取代苯类衍生物提供了高效方便的方法.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.