Curved thermal crack growth in nonhomogeneous materials with different shaped external boundaries II. Experimental results

Curved thermal cracks are considered running along special principal stress trajectories in self-stressed two-phase solids with different cross sections. The resulting mixed boundary-value problems of the stationary plane thermoelasticity are solved by applying the finite element method. Moreover, using appropriate directional criteria established for crack path prediction, the further extension of thermal cracks starting at the external surfaces of different shaped two-phase solids has been determined. Furthermore, the corresponding fracture mechanical data like crack edge displacements, strain energy release rates and stress intensity factors, respectively, have been calculated. Finally, the theoretical investigations given in part I of the paper are compared with experiments using differing optical methods of the experimental stress analysis. The experimental results reported in part II of the paper and the theoretical calculations show a reasonable agreement.     

Perturbation approaches of a planar crack in linear elastic fracture mechanics: A review

One current challenge of linear elastic fracture mechanics (LEFM) is to take into account the non-linearities induced by the crack front deformations. For this, a suitable approach is the crack front perturbation method initiated by Rice (1985). It allows to update the stress intensity factors (SIFs) when the crack front of a planar crack is perturbed in its plane. This approach and its later extensions to more complex cases are recalled in this review. Applications concerning the deformation of the crack front when it propagates quasistatically in a homogeneous or heterogeneous media have been considered in brittle fracture, fatigue or subcritical propagation. The crack shapes corresponding to uniform SIF have been derived: cracks with straight or circular fronts, but also when bifurcations exist, with wavy front. For an initial straight crack, it has been shown that, in homogeneous media, in the quasistatic case, perturbations of all lengthscales progressively disappear unless disordered fracture properties yields Family and Vicsek (1985) roughness of the crack front. Extension of those perturbation approaches to more realistic geometries and to coalescence of cracks is also envisaged.     

复合材料桥连的断裂动力学模型

复合材料产生裂纹后，其纤维处形成“桥连”，这是一个不可避免的现象。由于桥连问题很复杂．在数学方法的处理上有很大困难，至今人们研究大多是桥连的静力学问题．而对其动力学问题研究得很少。为了便于分析复合材料的问题，将桥连处用载荷代替，当裂纹高速扩展时．其纤维也连续地断裂。只有建立复合材料的桥连动力学模型，才能更好地研究复合材料的断裂动力学问题。通过复变函数论的方法，将所讨论的问题转化为Riemann—Hilbert问题。利用建立的动态模型和自相似方法，得到了正交异性体中扩展裂纹受运动的集中力P及阶跃载荷作用下位移、应力和动态应力强度因子的解析解，并通过叠加原理，最终求得了该模型的解。     

断裂力学判据的评述

从Inglis 和Griffith 的著名论文到Irwin 和Rice 等的奠基性贡献,对断裂力学中的线弹性断裂力学的K判据,界面断裂力学的G判据,和弹塑性断裂力学的J 判据作了扼要的综述. 介绍了在界面断裂力学G判据的基础上提出的界面断裂力学的K判据,以说明断裂力学的判据存在改进的可能性. 在综述中归纳出断裂力学判据中目前还没有较好解决的几个问题. 在总结以往断裂力学研究经验的基础上,指出裂纹端应力奇异性的源是对断裂力学判据存在的问题作进一步研究的切入点. 探讨了裂纹端应变间断的奇点是裂纹端应力奇异性的源的问题,从而对裂纹端应力强度因子的物理意义进行了讨论. 最后,阐述了进行可靠的裂纹端应力场的弹塑性分析是改进弹塑性断裂力学判据的关键,而进行可靠的裂纹端应力场的弹塑性分析的前提是要通过裂纹端应力奇异性的源的研究来获得作用在裂纹端的造成裂纹端应变间断的有限值应力.      

Fatigue crack shapes development of plate-to-plate welded joints

This paper presents crack shapes development of 3D surface semielliptical cracks which are always found at the weld toe of non-load-carrying cruciform welded joints. The alternating current potential drop technique has been used to measure the eight crack depths along the weld toe where probes are placed at 10-mm intervals. 3D crack shapes can be obtained at any particular cycle during the fatigue test. Subregion boundary element methods incorporating the transition and quarter-point elements along the crack front are used to validate the experimental stress intensity factors along the crack front. A method for evaluating the effective stress intensity factors is proposed. It is found that the numerical results generally agree with the experimental results.     

An experimental method for evaluating SIF distributions during crack turning in non-brittle materials

After briefly describing an experimental modelling method consisting of a marriage of frozen stress photoelasticity with the Griffith–Irwin equations of fracture mechanics, the method is applied to a generic motor grain model containing part through cracks emanating from the corner of a fin tip under internal pressure to determine approximate crack shapes and stress intensity factor values at maximum crack depth for various penetration depths. The role of shear modes during crack turning is described.     

On the circumferential strain factor criterion of mixed mode brittle fracture

In this paper, the criteria of mixed mode brittle fracture are carefully examined. It has been shown that, the circumferential strain factor criterion is rational and safe.With the exception of opening mode, mixed mode plane strain fracture of comparatively ductile materials(metals), in general, does not follow the theory of linear elastic fracture mechanics.Like the stress intensity factor that which is concerned is playing an important role in pure opening mode crack problems. We believe that, in mixed mode crack problems, the circumferential strain factor will become a parameter to determine the rate of fatigue crack propagation per cycle, and of stress corrosion cracking per unit time.First published in Nanking Aeronautical Institute Report of Science and Technology, No. 680, Jan., 1980 (in Chinese).     

基于GMTS准则的岩石复合型断裂机理研究

使用国际岩石力学协会规定的半圆盘岩石试件,加工不同倾角的直裂纹试样,通过三点弯曲加载试验得到不同I-II复合比断裂的断裂韧性和初始断裂角．传统裂纹扩展准则忽视了常数项即T应力及更高阶项的影响,导致该扩展准则的理论预测结果存在较大缺陷,本文通过考虑常数项,建立广义最大周向应力准则(GMTS)．在此基础上,分别采用传统的裂纹扩展准则和考虑T应力的裂纹扩展准则预测不同复合比裂纹的断裂韧性和初始扩展角,然后对比理论预测结果和实验结果．分析可得：常数项即T应力对断裂的临界应力强度因子和初始断裂角的影响是不可忽略的,且II型断裂占比较大时影响更大,广义最大周向应力准则预测值与实验测试结果之间的误差最小．     

Combination of fracture and damage mechanics for numerical failure analysis

A new approach for the analysis of crack propagation in brittle materials is proposed, which is based on a combination of fracture mechanics and continuum damage mechanics within the context of the finite element method. The approach combines the accuracy of singular crack-tip elements from fracture mechanics theories with the flexibility of crack representation by softening zones in damage mechanics formulations. A super element is constructed in which the typical elements are joined together. The crack propagation is decided on either of two fracture criteria; one criterion is based on the energy release rate or the J-integral, the other on the largest principal stress in the crack-tip region. Contrary to many damage mechanics methods, the combined fracture⧹damage approach is not sensitive to variations in the finite element division. Applications to situations of mixed-mode crack propagation in both two- and three-dimensional problems reveal that the calculated crack paths are independent of the element size and the element orientation and are accurate within one element from the theoretical (curvilinear) crack paths.     

The advanced simulation of fatigue crack growth in complex 3D structures

An advanced incremental crack growth algorithm for the three-dimensional (3D) simulation of fatigue crack growth in complex 3D structures with linear elastic material behavior is presented. To perform the crack growth simulation as effectively as possible an accurate stress analysis is done by the boundary-element method (BEM) in terms of the 3D dual BEM. The question concerning a reliable 3D crack growth criterion is answered based on experimental observations. All criteria under consideration are numerically realized by a predictor–corrector procedure. The agreement between numerically determined and experimentally observed crack fronts will be shown on both fracture specimens and an industrial application.     

Glass Fracture in the Region of Its Contact with Steel Balls

Results of experiments on indentation of steel balls of various diameters into glass specimens shaped as rectangular parallelepipeds are reported. The limiting load of formation of an annular crack near the contact area and the radius of this crack are experimentally determined. The field of the contact stress in the fracture region is found by using the Huber solution of the Hertz problem of ball indentation into an elastic half-space. Modeling fracture caused by contact interaction is based on using the local criterion of the maximum stress and several nonlocal criteria: average stress criterion, Nuismer criterion, and gradient criterion. For calculating the parameter that has the length dimension and is included into the nonlocal fracture criteria, the ultimate tensile stress and the critical stress intensity factor of glass are experimentally determined for beams without and with a notch. It is demonstrated that the experimental data on the annular crack radius are most adequately predicted by the gradient criterion among all criteria considered in the study. However, this criterion overpredicts the ultimate tensile stress in the course of beam bending, which is caused by the scale factor.     

Biaxial Load Effect on Crack Initiation for Orthotropic Materials

This paper is concerned with the study of the elastostatic fracture response of an orthotropic plate with an inclined crack and subjected at infinity to a biaxial uniform load. To this end an unconventional approach to the derivation of the complex variable expressions of the elastic fields is proposed. The above formulation has been used to solve the boundary value problem as superposition of Mode-I and Mode-II crack problems and it is shown that the near tip asymptotic expressions of stress and displacement fields are affected by non-singular terms originated by load biaxiality. The maximum circumferential tensile stress criterion is applied in order to investigate the effects of non-singular terms on the angle of crack extension.     

On the uses of special crack tip elements in numerical rock fracture mechanics

Numerical methods such as boundary element methods are widely used for the stress analysis in solid mechanics. These methods are also used for crack analysis in rock fracture mechanics. There are singularities for the stresses and displacements at the crack tips in fracture mechanics problem, which decrease the accuracy of the numerical results in areas very close to the crack ends. To overcome this, higher order elements and isoperimetric higher order elements have been used. Recently, special crack tip elements have been proposed and used in most of the numerical fracture mechanics models. These elements can drastically increase the accuracy of the results near the crack tips, but in most of the models only one special crack tip element has been used for each crack end. In this study the uses of higher order crack tip elements are discussed and a higher order displacement discontinuity method is used to investigate the effect of these elements on the accuracy of the results in some crack problems. The useful shape functions for two special crack tip elements, are derived and given in the text and appendix for both infinite and semi-infinite plane problems. In this analysis both Mode I and Mode II stress intensity factors are computed . Some example problems are solved and the computed results are compared with the results given in the literature. The numerical results obtained here are in good agreement with those cited in the literature. For the curved crack problem, the strain energy release rate, G can be calculated accurately in the vicinity of the crack tips by using the higher order displacement discontinuity method with a quadratic variation of displacement discontinuity elements and with two special crack tip elements at each crack end.     

脆性材料在双向应力下的断裂实验与理论分析

研究了脆性材料在双向应力下的断裂特性和失效机理，特别是在平行于裂纹的应力对临界断裂参数的影响方面进行了实验上和理论上的研究．采用玻璃、陶瓷等脆性材料进行了平面双向拉伸和单向拉伸试验，并对实验结果进行比较．观测直通裂纹的启裂和扩展过程，证明了双向应力对裂纹驱动力有明显影响，讨论了裂纹扩展的应变准则．     

瓷修复体界面断裂行为的模拟实验研究

本文利用云纹干涉法和云纹干涉－－有限元混合法，对瓷修复体的模拟双材料模型界面断裂问题进行了实验研究。用云纹干涉和数字错位云纹干涉法测量带边裂纹的双材料四点简支梁在剪切作用下界面表面的剪应变分布及界面两侧局部表面的位移场，实验表明，由于界面两两侧材料力学性质不同，表现出界面剪切断裂问题的非称性和裂尖附近复合型断裂的特点；用云纹干涉法和有限元法相结合的混合法对粘接界面角点应力奇异性进行研究，并对角点附近应力应变场作了分析，得到了应力奇异指数与边界楔角，载荷的关系，证明了用界面应力强度因子Kf来描述界面端部区域应力分布的公式，并得到了双材料界面端部区域的应力应变分布情况。本文的实验结果为进一步研究口腔金瓷修复体界面的优化设计提供了基础，同时也说明云纹干涉法对于双材料界面断裂行为的研究是有效的。     

Waveform fractal dimension for mode shape-based damage identification of beam-type structures

Mode shape-based structural damage identification has been a research focus during the last couple of decades. Most of the existing methods need a numerical or measured baseline mode shape serving as a reference to identify damage, and this requirement extremely limits the practicability of the methods. Recently, waveform fractal dimension such as Katz’s waveform fractal dimension (KWD) has been explored and applied to mode shape for crack identification without a baseline requirement. In this study, different from the popular KWD, an approximate waveform capacity dimension (AWCD) is formulated first, from which an AWCD-based modal abnormality algorithm (AWCD-MAA) is systematically established. Then, the basic characteristics of AWCD-MAA on abnormality detection of mode shapes, e.g., crack localization, crack quantification, noise immunity, etc., are investigated based on an analytical crack model of cantilever beams using linear elastic fracture mechanics. In particular, from the perspective of isomorphism, a mathematical solution on the use of applying waveform fractal dimension to higher mode shapes for crack identification is originally proposed, from which the inherent deficiency of waveform fractal dimension to identify crack when implemented to higher mode shapes is overcome. The applicability and effectiveness of the AWCD-MAA is validated by an experimental program on damage identification of a cracked composite cantilever beam using smart piezoelectric sensors/actuators (i.e., Piezoelectric lead–zirconate–titanate (PZT) and polyvinylidene fluoride (PVDF)). The proposed AWCD-MAA provides a novel, viable method for crack identification of beam-type structures without baseline requirement, and it largely expands the scope of fractal in structural health monitoring applications.     

A nonlocal theory for brittle fracture

In this paper, a nonlocal theory of fracture for brittle materials has been systematically developed, which is composed of the nonlocal elastic stress fields of Griffith cracks of mode-I, II and III, the asymptotic forms of the stress fields at the neighborhood of the crack tips, and the maximum tensile stress criterion for brittle fracture. As an application of the theory, the fracture criteria of cracks of mode-I, II, III and mixed mode I–II, I–III are given in detail and compared with some experimental data and the theoretical results of minimum strain energy density factor.     

Investigation on critical triaxiality along unified yield loci at crack tip under mixed mode (I + II) fracture

Metallic components used in industries and day to day appliances often contain micro-cracks. In general, cracks occur in various orientations to the loading axis. The present paper discusses the criticality of stress triaxiality, a well-known ductile fracture parameter, on the yield loci at the crack tip. In the process, an old model of stress triaxiality has been generalized using unified strength theory to incorporate various convex and nonconvex failure criteria, including single shear, twin shear, etc. The new triaxiality model also reveals about the effect of intermediate principal stress at the crack tip for materials with and without strength difference. The crack initiation angles at the crack tip, obtained through the proposed model have been found to be in unison with those obtained through other fracture criteria.