电化学法制备部分还原氧化石墨烯薄膜及其光电性能

提供了一种快速制备氧化石墨烯(GO)薄膜的方法, 并通过调节GO薄膜的含氧量来调控其能级结构.采用阳极电泳及阴极电化学还原联用的方法在F掺杂SnO₂(FTO)导电玻璃上制备出不同层数及含氧量的GO薄膜, 并通过扫描电镜(SEM)、X射线衍射(XRD)、紫外可见(UV-Vis)光谱、X射线光电子能谱(XPS)、拉曼光谱及电化学分析对样品进行表征. 用20-350 s 不同时间电泳沉积得到层数约为77-570层的GO薄膜. 经过不同时间阴极还原的GO薄膜的禁带宽度为1.0-2.7 eV, 其导带位置及费米能级也随之改变. GO作为p型半导体, 与FTO导电膜之间会形成p-n 结, 在光强为100 mW·cm^-2的模拟太阳光照射下, 电泳300 s 且电化学还原120 s时GO薄膜阳极光电流密度达到5.25×10^-8 A·cm^-2.     

还原石墨/氧化锌复合薄膜的制备及其光电转换性能

本工作研究不同过程还原的氧化石墨rGO/ZnO(reduced graphiteoxide/ZnO)复合膜的可见光激发光电转换性能。氧化石墨(GO)经KOH还原处理或NaBH4还原处理后,和氧化锌溶胶混合,通过旋涂法和热处理在F掺杂SnO2薄膜导电玻璃(FTO)衬底上形成复合薄膜。采用XRD、FTIR、FE-SEM、XPS、UV-Vis等方法对复合薄膜的晶相结构、微观形貌等进行表征,并测试了复合薄膜在可见光照射下的光电转换性能。GO的预处理过程对复合薄膜的结构影响显著,采用NaBH4对GO处理更有利于形成均匀薄膜。光电流测试结果表明不同复合薄膜均能实现可见光照射下产生光电流,其原理为rGO的光激发电子跃迁到ZnO,而空穴在rGO中迁移,在rGO与ZnO界面实现光生载流子分离。其中NaBH4处理后的rGO/ZnO复合薄膜光电流密度最大,达6×10-7A·cm-2。     

ZnO-聚苯胺复合膜的制备和性能研究

利用溶胶-凝胶法在Au膜、聚苯胺膜(PANI)和ITO(导电玻璃)基体上制备ZnO纳米微粒膜,初步研究了该微粒膜的形貌,结构和紫外-可见吸收等性质.结果表明,PANI的孔洞结构抑制了ZnO颗粒的团聚,因此,ZnO-PANI复合膜的紫外-可见吸收光谱和荧光光谱相对于ZnO-Au微粒膜有一定程度的蓝移.光电流谱研究同时表明,ZnO-聚苯胺复合膜有望在光电化学方面得到应用.     

还原石墨/氧化锌复合薄膜的制备及其光电转换性能

本工作研究不同过程还原的氧化石墨rGO/ZnO(reduced graphite oxide/ZnO)复合膜的可见光激发光电转换性能。氧化石墨(GO)经KOH还原处理或NaBH₄还原处理后, 和氧化锌溶胶混合, 通过旋涂法和热处理在F掺杂SnO₂薄膜导电玻璃(FTO)衬底上形成复合薄膜。采用XRD、FTIR、FE-SEM、XPS、UV-Vis等方法对复合薄膜的晶相结构、微观形貌等进行表征, 并测试了复合薄膜在可见光照射下的光电转换性能。GO的预处理过程对复合薄膜的结构影响显著, 采用NaBH₄对GO处理更有利于形成均匀薄膜。光电流测试结果表明不同复合薄膜均能实现可见光照射下产生光电流, 其原理为rGO的光激发电子跃迁到ZnO, 而空穴在rGO中迁移, 在rGO与ZnO界面实现光生载流子分离。其中NaBH₄处理后的rGO/ZnO复合薄膜光电流密度最大, 达6×10^-7 A·cm^-2。     

Ag-Ag2Se共敏化ZnO花-棒异质结构的合成及其光电化学特性

采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag2Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析和表征,并测试其光电化学特性以及量子效应。结果表明,Ag-Ag2Se共敏化ZnO花-棒三维有序结构对太阳光的吸收范围延展至近红外区(750 nm),并且在敏化层与ZnO基质界面形成异质结,有效的抑制光生电子-空穴对复合,增强光转换量子效应,从而提高光电化学性能,开路电压达到-0.77 V,短路电流为0.64 mA。     

P3HT修饰一维有序壳核式CdS/ZnO纳米棒阵列复合膜的光电化学性能

采用电化学方法在铟锡氧化物(ITO)导电玻璃上制备了高度有序的ZnO纳米棒阵列, 在ZnO纳米棒阵列上先后电化学沉积CdS纳米晶膜及聚3-己基噻吩(P3HT)薄膜得到P3HT修饰的一维有序壳核式CdS/ZnO纳米阵列结构, 并通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、能量散射X射线(EDX)等表征手段证实了该结构的形成. 以此纳米结构薄膜为光阳极组装新型半导体敏化太阳电池, 研究了CdS纳米晶膜的厚度和P3HT薄膜的沉积对电池光伏性能的影响, 初步探讨了电荷在电池结构中的传输机理, 结果表明, CdS纳米晶膜和P3HT薄膜的沉积有效地拓宽了光阳极的光吸收范围, 实验中电池的光电转换效率最高达到1.08%.     

纳米结构ZnO/染料/聚吡咯光阳极的光电化学性质

用光电化学方法研究了染料RuL2 (NCS) 2 (L =2 ,2′ bipydine 4,4′ dicarboxylicacid) (简写为Dye)、聚吡咯 (PPy)敏化氧化锌 (ZnO)纳米晶电极以及用RuL2 (NCS) 2 和PPy复合敏化ZnO纳米晶膜电极的光电化学行为 .实验表明 ,ZnO/PPy纳米多孔膜电极为双层n 型半导体结构 .PPy和RuL2(NCS) 2 都可对ZnO纳米晶膜产生敏化作用 ,ZnO/RuL2 (NCS) 2 /PPy复合多孔膜电极产生的光电流远大于ZnO/PPy纳米多孔膜电极和ZnO/Dye多孔膜电极产生的光电流 .讨论了该电极的光生电子的机理 ,初步测定了ZnO/RuL2 (NCS) 2 /PPy电极作为光阳极的光电化学电池的工作特性曲线 ,测得该电池的光电转换效率为 1 .3% ,填充因子为 0 .75 .     

二氧化钛空心微球的合成及其光电化学性能

采用水热法合成了TiO2空心微球,并通过XRD、SEM、TEM对其结构和形貌进行了分析.将TiO2空心微球作为光阳极制作成染料敏化太阳电池,并进行光电化学性能测试.结果表明,电流-电压曲线测试表明以TiO2空心微球为光阳极的电池光电转换效率远高于以TiO2纳米晶为光阳极的电池;紫外-可见吸收光谱及电化学阻抗谱(EIS)显示TiO2空心微球的光吸收能力增强,电池的电荷转移阻抗更低,表明其空心的球体结构是其光电性能提高的主要原因.     

Ag-Ag2Se共敏化ZnO花-棒异质结构的合成及其光电化学特性

采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag₂Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析和表征,并测试其光电化学特性以及量子效应。结果表明,Ag-Ag₂Se共敏化ZnO花-棒三维有序结构对太阳光的吸收范围延展至近红外区(750 nm),并且在敏化层与ZnO基质界面形成异质结,有效的抑制光生电子-空穴对复合,增强光转换量子效应,从而提高光电化学性能,开路电压达到-0.77 V,短路电流为0.64 mA。     

制备条件对PANI/PATP/Au和TiO_2-PANI/PATP/Au膜光电化学性能的影响

应用电化学方法在不同条件下制备聚苯胺 (PANI)膜和TiO2 -PANI复合膜 ,并对其光电化学性能进行研究 .实验表明 ,制备条件是影响膜光电化学性能的重要因素 .对氨基硫酚 (PATP)的组装有利于改善PANI膜的附着力 ;部分氧化态PANI膜的光电化学响应明显优于还原态和氧化态PANI膜的光电化学响应 ;部分氧化态PANI膜的厚度对其光电化学性能有一最佳值 ;热处理虽然有利于改善TiO2 的光电化学性能 ,但温度太高 ,将破坏PANI膜的表面结构 ,对于TiO2 -PANI复合膜有一最佳的热处理温度 .优化制备条件大可改善TiO2 -PANI复合膜和PANI膜的光电化学性能     

One-step synthesis of Pt nanoparticles/reduced graphene oxide composite with enhanced electrochemical catalytic activity

A one-step electrochemical approach for synthesis of Pt nanoparticles/reduced graphene oxide(Pt/RGO) was demonstrated.Graphene oxide(GO) and chloroplatinic acid were reduced to RGO and Pt nanoparticles(Pt NPs) simultaneously,and Pt/RGO composite was deposited on the fluorine doped SnO 2 glass during the electrochemical reduction.The Pt/RGO composite was characterized by field emission-scanning electron microscopy,Raman spectroscopy and X-ray photoelectron spectroscopy,which confirmed the reduction of GO and chloroplatinic acid and the formation of Pt/RGO composite.In comparison with Pt NPs and RGO electrodes obtained by the same method,results of cyclic voltammetry and electrochemical impedance spectroscopy measurements showed that the composite electrode had higher catalytic activity and charge transfer rate.In addition,the composite electrode had proved to have better performance in DSSCs than the Pt NPs electrode,which showed the potential application in energy conversion.     

新型十二烷基三甲氧基硅烷/氧化石墨烯复合膜对430不锈钢耐蚀性能的影响

使用一步电沉积法在430不锈钢上制备出十二烷基三甲氧基硅烷(DTES)/氧化石墨烯(GO)复合膜。 拉曼光谱(Raman)与扫描电子显微镜(SEM)测试表明,氧化石墨烯均匀地混合在硅烷膜中,并用电化学交流阻抗与极化曲线方法对这种复合膜所保护的430不锈钢进行耐蚀性能测试。 结果显示,在3.5%NaCl溶液中,430不锈钢会发生腐蚀反应,而存在硅烷复合膜的430不锈钢的耐蚀性能显著地提高。 研究表明,由于氧化石墨烯出色的阻隔性能一定程度上弥补了硅烷膜的缺陷,而且延长了腐蚀介质通过硅烷基质的路径,因此复合膜有着对基底物质更强的保护性能。     

Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

可见光高催化活性GO/Ag3PO4/Ni复合薄膜的制备和性能

以磷酸铵和氧化石墨烯悬浊液的混合液为电解液,采用电化学共沉积法制备了Ag3PO4基GO/Ag3PO4/Ni复合薄膜。运用扫描电子显微镜(SEM)、能量色散谱(EDS)、X射线衍射(XRD)、拉曼光谱(Raman)和紫外可见漫反射光谱(UV-Vis DRS)等对其形貌、物相和光谱特性进行分析。最佳工艺制备的GO/Ag3PO4/Ni复合薄膜呈现出GO包覆在直径为100 nm左右的Ag3PO4纳米球外的表面形貌。GO片与Ag3PO4纳米球之间存在强电荷相互作用。与单独的Ag3PO4纳米球相比,GO片的附着导致带隙缩小,可见光区的吸收率增强。可见光下考察了复合薄膜降解罗丹明B的光催化活性和稳定性,并利用荧光光谱和捕获剂法对薄膜的光催化机理进行了探索。结果表明,GO片的加入不仅显著提高了Ag3PO4的光催化活性,而且提高了Ag3PO4的结构稳定性。光催化降解罗丹明B 60 min时,GO/Ag3PO4/Ni复合薄膜的降解率是Ag3PO4/Ni薄膜的1.32倍。在保持薄膜光催化活性基本不变的前提下可循环使用7次。GO优异的电荷传导性能,以及Ag3PO4纳米球与GO片之间的正协同效应是提高复合薄膜光催化性能的主要原因。     

First-Row Transition-Metal Cations (Co2+, Ni2+, Mn2+, Fe2+) and Graphene (Oxide) Composites: From Structural Properties to Electrochemical Applications

Composites of graphene (oxide) (GO) and first-row transition-metal cations (Co²⁺, Ni²⁺, Mn²⁺, Fe²⁺) are prepared by mixing GO and aqueous metal salt solutions. The amount of metal cation bound to GO nanosheets is calculated by using inductively coupled plasma mass spectrometry (ICP-MS) and the possible binding sites of the metals are investigated by means of attenuated total reflectance infrared (ATR-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) measurements. Electrodes loaded with the metal/GO composites are prepared by a simple drop-casting technique without any binders or conductive additives. The effect of electrochemical reduction on the structure of the composite electrodes is investigated by Raman spectroscopy, XPS, X-ray diffraction (XRD) analysis, and field emission scanning electron microscopy (FESEM). A detailed electrochemical characterization is performed for the utilization of the composite electrodes for electrochemical capacitors and possible oxygen reduction reaction electrocatalysts by cyclic voltammetry (CV) and rotating disk electrode measurements. The highest areal capacitance is achieved with the as-deposited Fe/GO composite (38.7 mF cm⁻² at 20 mV s⁻¹). In the cyclic stability measurements, rCo/GO, rNi/GO, rMn/GO, and rFe/GO exhibit a capacitance retention of 44, 1.1, 73, and 87 % after 3000 cycles of CV at 100 mV s⁻¹, respectively.     

钼酸盐封闭后处理的热镀锌钢板硅烷膜的耐蚀性

为进一步增强硅烷膜的耐蚀性, 将硅烷化热镀锌钢板用钼酸盐溶液进行封闭后处理, 并采用扫描电子显微镜(SEM)、中性盐雾(NSS)实验、盐水全浸实验和电化学技术研究了所得复合膜层的表面形貌和耐蚀性能. 结果表明: 经钼酸盐溶液封闭处理后, 硅烷膜的孔隙被填充, 在锌层表面形成了由硅烷膜和钼酸盐转化膜构成的连续完整致密的复合膜; 复合膜的耐蚀性能明显提高, 且与钼酸盐溶液的封闭时间有关, 封闭60 s时所形成的复合膜的耐蚀性最佳. 在5%(w, 质量分数)NaCl溶液中的电化学测量结果表明: 硅烷化热镀锌钢板经钼酸盐溶液封闭处理后, 同时抑制了腐蚀过程中的阳极和阴极反应, 但主要是抑制阴极反应, 导致腐蚀电流密度明显减小, 发挥了单一硅烷膜和单一钼酸盐转化膜腐蚀防护的协同效应, 腐蚀防护效率高达99.1%; 随浸泡时间延长, 试样低频扩散阻抗先增大后减小, 表明膜层具有一定的“自愈”能力, 其耐蚀性优于常规铬酸盐钝化膜.     

Selective and sensitive determination of dopamine by composites of polypyrrole and graphene modified electrodes

A novel method is developed to fabricate the polypyrrole (PPy) and graphene thin films on electrodes by electrochemical polymerization of pyrrole with graphene oxide (GO) as a dopant, followed by electrochemical reduction of GO in the composite film. The composite of PPy and electrochemically reduced graphene oxide (eRGO)-modified electrode is highly sensitive and selective toward the detection of dopamine (DA) in the presence of high concentrations of ascorbic acid (AA) and uric acid (UA). The sensing performance of the PPy/eRGO-modified electrode is investigated by differential pulse voltammetry (DPV), revealing a linear range of 0.1-150 μM with a detection limit of 23 nM (S/N = 3). The practical application of the PPy/eRGO-modified electrode is successfully demonstrated for DA determination in human blood serum.