等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Ultrafast photodissociation dynamics of cyanobenzene near the ionization threshold

The photodissociation of cyanobenzene (C₆H₅CN) at a high energy of 9.6 eV near the ionization threshold has been investigated using femtosecond time-resolved laser-induced fluorescence (LIF) spectroscopy. Cyanobenzene molecules were excited by three-photon excitation at 388.6 nm and the temporal evolution of the free CN(X) fragment formation was probed in real time by monitoring the CNX→BLIF signal. The results revealed that the CN(X) products are formed on three very different timescales, suggesting that the dissociation proceeds through at least three dissociation pathways at such a high energy.     

Dissociation of multiply ionized alkanes from methane to n-butane due to electron impact

The dissociation of up to triply ionized alkanes from methane to n-butane has been studied through electron impact ionization at an electron energy of 200 eV. The ionic fragments are recorded by a covariance mapping technique using a focusing time-of-flight mass spectrometer. The absolute cross-sections for the numerous dissociation channels of all the alkane monocations and dications, as well as propane and n-butane trications have been obtained. All the alkane dications are unstable and dissociate mostly into ion pairs, in which the production of proton pairs is found to be a major dissociation channel. The ionic products from the dissociation of ethane, propane and n-butane dications have a similar distribution, in which the first few abundant ion species are H⁺, CH₃⁺, C₂H₃⁺ and C₂H₂⁺. The total single ionization cross-sections agree well with the results of the binary-encounter-Bethe method. The distortion of the ion coincidence islands has been explained as due to the deviation from the space focusing condition of the mass spectrometer. Metastable decays, such as C₃H₅²⁺→CH₃⁺+C₂H₂⁺ in propane and C₄H₁₀⁺→C₃H₇⁺+CH₃ in n-butane have been observed and identified using the initial and final angles of the decay traces.     

Ultrafast dissociation dynamics of ketones at 195 nm

The photodissociation dynamics of the 3s Rydberg state of three ketones (CH₃CO–R, R=C₂H₅, C₃H₇, and iso-C₄H₉) and the ensuing dissociation of the nascent acetyl radical following 195 nm excitation were investigated by ultrafast photoionization spectroscopy. The 3s state the lifetimes of these ketones are similar (2.5–2.9 ps), though lifetimes of the acetyl radical range from 8.6 ps for CH₃CO–C₂H₅, 15 ps for CH₃CO–C₃H₇, to 23 ps for CH₃CO–(iso-C₄H₉), which suggests that for larger R more vibrational degrees of freedom compete for the excess energy so that less energy is partitioned into the internal energy of the acetyl radical.     

乙烯自由基A2A''(v'=0)←X2A'(v''=0)带的转动分析

通过193 nm光解丁烯酮分子产生乙烯基自由基(C₂H₃). 经射流冷却后, 用另一束激光光解C₂H₃, 生成的氢原子碎片经共振增强多光子电离(REMPI)过程, 记录氢离子信号随光解波长变化, 得到20020～20070 cm_-1范围内乙烯基激发的转动分辨光谱. 该谱对应于A²A'(v'=0)←X²A'(v'=0)跃迁的转动结构. 结合量子化学理论计算、光谱拟合以及前人的研究结果, 对该段光谱进行了完整的转动识别, 确定了40条转动谱线的位置. 由光谱拟合还得到A²A'(v'= 0 )能级的预解离寿命为3.3 ps, 且不依赖于转动量子数.     

正一溴代烷烃的紫外光解动力学研究

利用共振增强多光子电离飞行时间质谱(REMPI-TOFMS),研究了长链正一溴代烷烃R_Br(R为正烷烃基)(C₂H5Br,n-C₃H₇Br,n-C₄H₉Br)在234及267nm附近的光解动力学.溴碎片来源于R_Br的直接解离:R_Br→R+Br(²P_3/2)/Br^*(2P1/2).根据测定的离子信号强度,得到了Br^*与Br的分支比N(Br^*)/N(Br)及相应的相对量子产额(Br^*)和(Br).(Br^*)与激光波长及分子结构显示了一定的依赖关系.将实验结果用CH3Br的解离模型进行拟合,得到了长链R_Br的光解动力学行为的定性解释.     

The structure of C5H5RFe+ (R = F,Cl, Br,I, O,OH, OCH3, C6H5, H) ions in the gas phase and the generation of their neutral counterparts by neutralization-reionization mass spectrometry

The structure of C₅H₅FeR^+˙ ions was studied by tandem mass spectrometry that included the neutralization-reionization (NR) method. Halogen-containing species (R = F, Cl, Br, I) showed fragmentation that was consistent with a structure that has the cyclopentadienyl ring and R as separate ligands at the metal atom (structure A). This structure also was identified for C₅H₅FeO⁺ and CpFeOH^+˙ ions, but these species also easily isomerized to metal-cyclopentadiene structure, RC₅H₅Fe^+˙ (B), followed by hydrogen rearrangement(s) and CO loss. B was the dominant structure of C₅H₅FeH^+˙ and C₅H₅FeC₆H^+˙₅ ions. All ions that have structure A showed recovery signals in their NR mass spectra that indicated that their stable neutral counterparts were generated. The NR mass spectra also provided complementary information about the structure of ions before neutralization and after reionization.     

丙酮在XeCl准分子激光辐射下的多光子电离和碎裂研究

我们用扩散分子束多光子电离光谱技术研究了丙酮在XeCl准分子激光辐射下的多光子电离和碎裂行为。实验表明丙酮没有产生母体离子峰(m/e=58), 只给出m/e=43和15两个峰, 分别对应于丙酮光解所产生的两个碎片CH_3 CO和CH_3。其离子信号(1)分别与激光强度(Ⅰ)的3和3.6次方成正比。分析表明离子是由中性碎片电离产生的。     

A theoretical study on decomposition of carbon tetrachloride, trichloroethylene and ethyl chloride in dry air under the influence of an electron beam

New experimental data were published in literature regarding CCl₄, C₂HCl₃ and C₂H₅Cl decomposition in dry air under electron beam influence. Taking into account experimental data theoretical models of those species decomposition were established and computer simulations were performed by the authors of this work to find the kinetics of such processes. The results of the calculations and experimental data show that CCl₄ decomposition depends on delivered dose and initial CCl₄ concentrations. The calculation revealed that recombination of CCl⁺₄ and Cl⁻ is the source of CCl₃ radicals and that reaction may have an important role in the process of CCl₄ decomposition. A theoretical model of C₂HCl₃ decomposition in dry air under electron beam influence describes the decay of C₂HCl₃ and the formation of several products such as Cl₂, CCl₂O, CO, CO₂, HCl and C₂HCl₃O. The detailed comparison of experimental and theoretical data shows relatively good agreement in efficiency of C₂HCl₃ decomposition process, but it can be achieved only with an assumption that the relation between rate constants of C₂HCl₄O intermediate product decomposition (C₂HCl₃O+Cl and COCl₂+CHCl₂) should be around 20 and C₂HCl₃O oxidation rate should be not lower than 7.5×10⁻¹¹ cm³/mols. All those rate constants are not yet established experimentally. The results of the calculation of C₂H₅Cl decomposition and the data obtained experimentally were compared. The temperature, gas pressure, initial C₂H₅Cl concentration and dose range were equal in both cases. An elaborated model allow us to obtain quantitatively similar results as the experiments, but the degree of C₂H₅Cl decomposition for certain dose levels is significantly higher in experimental data. It is quite probable that some important processes have not been included to the theoretical model.     

The importance of the plume ejection time for the fragmentation yields observed in the UV ablation of molecular van der Waals films. Ablation of chlorobenzene films at 248 nm

The efficiency of photolysis in the ablation of thick C₆H₅Cl films at 248 nm is probed over 40–300 mJ/cm² by means of time-of-flight quadrupole mass spectrometry. Up to ≈ 150 mJ/cm², the photolysis yield is considerably smaller than that in the gas-phase. We argue that because of plume ejection well after the laser pulse, photolysis occurs exclusively in the film, and as a result, permanent dissociation is limited by the operation of efficient recombination processes characteristic of condensed phases. Fragmentation starts being important only at higher fluences, at which desorption during the laser pulse is indicated to be significant.     

Dissociation reactions of the vinyl radical in the AA″ state

In the present theoretical work we have explored mechanisms of dissociation reactions of the vinyl radical in the A²A″ state (C₂H₃ (A²A″)) and examined possible pathways for nonadiabatic dissociation of C₂H₃ (A²A″) into C₂H₂ (X¹Σ_g⁺). In the calculations we used the complete active space self-consistent field (CASSCF) and multiconfiguration second-order perturbation theory (CASPT2) methods in conjunction with the cc-pVDZ and cc-pVTZ basis sets. Mechanisms for the following three dissociation channels of C₂H₃ in the A²A″ state were explored: (1) C₂H₃ (A²A″) → C₂H₂ (trans, ³A_u) + H, (2) C₂H₃ (A²A″) → C₂H₂ (cis, ³A₂) + H, and (3) C₂H₃ (A²A″) → H₂CC (³A₂) + H. The CASSCF and CASPT2 potential energy curve calculations for the C₂H₃ (A²A″) dissociation channels (1)–(3) indicate that there is neither transition state nor intermediate for each of the channels. At the CASPT2//CASSCF/cc-pVTZ level, the dissociation energies for channels (1)–(3) are predicted to be 84.3, 91.1, and 86.9 kcal/mol, respectively. For a recently observed nonadiabatic dissociation of C₂H₃ (A²A″) into C₂H₂ (X¹Σ_g⁺) + H [J. Chem. Phys. 111 (1999) 3783], two previously suggested internal conversion (IC) pathways were examined based on our CASSCF and CASPT2 calculations. Our preliminary CASSCF and CASPT2 calculations indicate that the assumed IC pathway via the twisted C₂H₃ (A²A^′) structure might be feasible. The CASSCF/cc-pVTZ geometry optimization and frequency analysis calculations were performed for the four C_2v bridge structures in the ²B₂, ²A₂, ²B₁, and ²A₁ states along the pathways of the 1²A^′ (X²A^′), 1²A″ (A²A″), 2²A″, and 2²A^′ states of C₂H₃, respectively, and the CASPT2//CASSCF/cc-pVTZ energetic results indicate that the assumed IC pathway, via a C_2v (²A₂) structure and then ²A₂/²A₁ surface crossing, be not feasible since at their excitation wavelengths (327.4 and 366.2 nm) the C_2v (²A₂) structure could not be accessed.