等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Core-shell lipid-polymer nanoparticles as a promising ocular drug delivery system to treat glaucoma

Nowadays,tremendous researches have been focused on the core-shell lipid-polymer nanoparticles(LPNs) due to the advantages of both liposomes and polymer nanoparticles.In this work,LPNs were applied to encapsulate brinzolamide(Brz-LPNs) for achieving sustained drug release,improving drug corneal permeation and enhancing drug topical therapeutic effect.The structure of Brz-LPNs was composed of poly(lactic-co-glycolic) acid(PLGA) nanocore which encapsulated Brz(Brz-NPs) and lipid shell around the core.Brz-LPNs were prepared by a modified thin-film dispersion method.With the parameters optimization of Brz-LPNs,optimal Brz-LPNs showed an average particle size of151.23±1.64 nm with a high encapsulation efficiency(EE) of 86.7%±2.28%.The core-shell structure of Brz-LPNs were confirmed by transmission electronic microscopy(TEM).Fourier transformed infrared spectra(FTIR) analysis proved that Brz was successfully entrapped into Brz-LPNs.Brz-LPNs exhibited obvious sustained release of Brz,compared with AZOPT^■ and Brz-LPs.Furthermore,the corneal accumulative permeability of Brz-LPNs significantly increased compared to the commercial available formulation(AZOPT^■) in vitro.Moreover,Brz-LPNs(1 mg/mL Brz) showed a more sustained and effective intraocular pressure(IOP) reduction than Brz-LPs(1 mg/mL) and AZOPT^■(10 mg/mL Brz) in vivo.In conclusion,Brz-LPNs,as promising ocular drug delivery systems,are well worth developing in the future for glaucoma treatment.     

Self-templated synthesis of single-crystal and single-domain ferroelectric nanoplates

Free-standing single-crystal PbTiO(3) nanoplates were synthesized by a facile hydrothermal method. A "self-templated" crystal growth is presumed to lead to the formation of the PbTiO(3) nanoplates, which have ferroelectric single-domain structures, whose polarization areas can be manipulated by writing and reading. The nanoplates are also effective catalysts for the oxidation of carbon monoxide.     

沉淀转化法制备多孔片状纳米LaF3

采用实验中所合成的LaPO4纳米棒为前驱体,通过沉淀的转化作用,大面积地制备了单分散的片状纳米LaF3。采用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射仪(XRD)、BET(Brunauer-Emmett-Teller)测试对片状纳米LaF3的形貌、结构、相组成及表面性质进行了分析。片状纳米LaF3底边长约为40 nm,片的厚度约为35 nm,大小均一,具有多孔结构。通过改变反应溶剂,可以控制LaF3粒子的成核、生长和团聚,从而有效地调控多孔片状纳米LaF3的颗粒尺寸和分散性。对多孔片状纳米LaF3的生长机制进行了研究,结果表明LaPO4和LaF3的溶度积常数差导致了片状纳米LaF3的生成;体系中自身存在的Ostwald ripening作用使片状纳米LaF3出现了多孔结构。     

Ferroelectric Ionic Molecular Crystals with Significant Plasticity and a Low Melting Point: High Performance in Hot-Pressed Polycrystalline Plates and Melt-Grown Crystalline Sheets

Among ferroelectric crystals based on small molecules, plastic/ferroelectric crystals are currently receiving particular attention because they can be used as bulk polycrystals. Herein, we show that an ionic molecular ferroelectric crystal, guanidinium tetrafluoroborate, exhibits significant malleability and multiaxial ferroelectricity despite the absence of a plastic crystal phase. Powder samples of this crystal can be processed into transparent bulk crystalline plates either by press-forming or by melt-growing. The plates show high ferroelectric performance and related properties, demonstrating the largest hitherto reported spontaneous polarization for bulk polycrystals of small-molecule-based ferroelectrics. Owing to the ready availability of large-scale materials and processability into various bulk crystalline forms, this ferroelectric crystal represents a highly promising functional material that will boost research on diverse applications as bulk crystals.     

New ferroelectric and antiferroelectric liquid crystals studied by complementary methods

Four new synthesised liquid crystalline compounds belonging to the homologous series of fluorinated biphenyl benzoate esters have been studied to compare their dielectric and electrooptic properties. Three of the studied compounds exhibited ferro- and antiferroelectric phases while one of them exhibited only one liquid crystalline phase – ferroelectric SmC*. No paraelectric phase was detected and straight transition between isotropic liquid and ferroelectric phases was observed for all studied compounds. Tilt angle for all of the studied compounds was equal to ca. 45? in the liquid crystalline phases, except temperature range close to the isotropic liquid–ferroelectric smectic phase transition. Temperature dependences of helical pitch, spontaneous polarisation and switching time have been determined. Based on XRD results, temperature dependence of the layer thickness has also been found. Only one relaxation process has been revealed in the ferroelectric as well as antiferroelectric phases, even the bias field up to 8 V/µm was applied. The dielectric and electrooptic data are discussed based on the mean-field theory predictions.     

Synthesis and characterization of new series of ferroelectric liquid crystals containing oligooxyethylene spacers

Four series of ferroelectric liquid crystals containing oligooxyethylene spacers have been synthesized. These obtained liquid crystal compounds were characterized by NMR, differential scanning calorimetry (DSC) and optical polarized microscopy (POM). The properties of the liquid crystalline phase were investigated as a function of spacer units, numbers of core aromatic rings, and different terminal asymmetric moieties. It was found that (i) the phase transition temperature decreased with the increasing oligooxyethylene spacer unit, (ii) the liquid crystalline phases were enhanced in three phenyl ring system than in two phenyl ring system, and (iii) ferroelectric liquid crystals containing different terminal asymmetric moieties exhibited novel mesophase phenomena. A twist grain boundary phase (TGB_A phase) was observed in some compounds of this study. Furthermore, a wide temperature chiral smectic Crange including room temperature was achieved.     

(S)-Isoleucine and (R)-2-octanol as chiral precursors of new chiral liquid crystalline thiadiazoles: synthesis, mesomorphic and ferroelectric properties

New chiral Schiff bases with a 1,3,4-thiadiazole unit in the rigid core were synthesized (SB1-SB4). These compounds contain a chiral chain derived from (S)-isoleucine and (R)-2-octanol. Their liquid crystalline properties were studied by polarizing optical microscopy, differential scanning calorimetry and X-ray diffraction. Thereby it was found that most of the new compounds exhibit a chiral Smectic C phase. A study of the ferroelectric properties is described.     

旋光性聚合物的铁电性能

旋光性高分子在结构上具有一定的空间特异性,因而可以有多种应用。根据铁电材料所必需具备的条件,经过特定的分子结构设计,可以使之具备铁电性能,据此,人们已合成了许多不同类型的铁电聚合物。本文按照铁电聚合物所处的聚集态不同,分别综述了具有铁电特性的晶态和液晶态旋光性聚合物的种类、结构特点及其铁电性能,分析讨论了影响液晶态旋光性聚合物的自发极化率和响应时间的因素。     

Ferroelectric side group liquid crystalline polysiloxanes containing a chiral sulphinate derivative

A series of chiral liquid crystalline homo- and co-polysiloxanes is reported, in which the chirality is introduced via an arenesulphinate moiety. All polysiloxanes were prepared by using three polymer-analogous reactions and exhibit the ferroelectric SmC* phase. In the series of copolymers, a high heterogeneity in the ratio of mesogenic pendants is observed and explains the existence of large biphasic regions at the phase transitions. A complete characterization of the ferroelectric properties was performed for the copolysiloxanes, and revealed high values of the spontaneous polarization.     

Epitaxial growth alignment of ferroelectric smectic C phases on rubbed polymers

Several of the polymers reported for surface alignment of ferroelectric smectic C phases in the literature are tested with a ferroelectric room temperature mixture. The results for this material and the reported findings in the literature are compared to the known crystal structure of the polymers. It is found that polymers with triclinic or monoclinic crystals give good alignment and bistability for the smectic C phase. Other crystal structures or non-crystalline polymers give a poorer performance. The mechanisms for creating a highly crystalline polymer surface are discussed, and the epitaxial growth of smectic phases on the crystalline surface is shown to be in accord with experiment.     

Ferroelectric side group liquid crystalline polysiloxanes containing a chiral sulphinate derivative

A series of chiral liquid crystalline homo- and co-polysiloxanes is reported, in which the chirality is introduced via an arenesulphinate moiety. All polysiloxanes were prepared by using three polymer-analogous reactions and exhibit the ferroelectric SmC* phase. In the series of copolymers, a high heterogeneity in the ratio of mesogenic pendants is observed and explains the existence of large biphasic regions at the phase transitions. A complete characterization of the ferroelectric properties was performed for the copolysiloxanes, and revealed high values of the spontaneous polarization.