等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Adduct between quadricyclane and (η-cyclopentadienyl)(1,2-benzenedithiolato)cobalt(III): formation and structure

The reaction of (η⁵-cyclopentadienyl)(1,2-benzenedithiolato)cobalt(III) (1) in quadricyclane (Q) at 90°C gives 1:1 adducts of 1 and Q. The main adduct (40% yield) has a unique structure, in which the 5-and 7-positions of norbornene are bonded to Co and S of 1. A mechanism of the formation of the adduct (by the use of deuterium-labeled Q), including a skeletal rearrangement of Q, is proposed.     

自由基诱导的水溶液中氟西汀的降解:脉冲辐解及稳态辐照研究

The reactions of the pharmaceutical fluoxetine (FLX) with different radicals were investigated by pulse radiolysis. The reaction of hydroxyl radical (·OH) with FLX formed hydroxylated adduct of the aromatic ring, while oxidation of FLX by sulfate radical anion (SO₄^·-) formed benzene radical cation that further reacted with H₂O to yield the ·OH adduct. The determined rate constants of ·OH, hydrated electrons (e_aq^-), and SO₄^·- with FLX were 7.8×10⁹, 2.3×10⁹, and 1.1×10⁹ mol·L^-1·s^-1, respectively. In the steady-state radiolysis study, the degradation of FLX in different radiolytic conditions by electron beam irradiation was detected by HPLC and UV-Vis spectra techniques. It was found that FLX concentration decreased by more than 90% in both N₂O and air-saturated solutions after 1.5 kGy irradiation. In contrast, only 43% of FLX was decomposed in N₂-saturated solution containing 0.1 mol·L^-1 tert-butanol. The degradation rates of FLX in acidic and neutral solutions were higher than those in alkaline solutions. Our results showed that the degradation of FLX is optimal in air-saturated neutral solution, and ·OH-induced degradation is more efficient than SO₄^·- oxidation of FLX. The obtained kinetic data and optimal conditions give some hints to understand the degradation of FLX.     

α-甲氧基萘的电子转移光氧化反应

近年来芳烃和杂环化合物的电子转移光氧化反应受到日益的注意^[1-5]。电子转移光氧化反应不仅可应用于很多对¹O₂为惰性的烯烃和芳烃^[1-7],而且对某些¹O₂活性化合物,也可给出与¹O₂反应不同的产物。     

Theoretical study on reaction mechanism of the vinyl radical with nitrogen atom

The complex triplet potential energy surface of the C₂H₃N system is investigated at the UB3LYP and CCSD(T) (single-point) levels in order to explore the possible reaction mechanism of C₂H₃ radical with N(⁴S). Eleven minimum isomers and 18 transition states are located. Possible energetically allowed reaction pathways leading to various low-lying dissociation products are obtained. Starting from the energy-rich reactant C₂H₃+N(⁴S), the first step is the attack of the N atom on the C atom having one H atom attached in C₂H₃ radical and form the intermediate C₂H₃N(1). The associated intermediate 1 can lead to product P₁ CH₂CN+H and P₂ ³CH₂+³HCN by the cleavage of C–H bond and C–C bond, respectively. The most favorable pathway for the C₂H₃+N(⁴S) reaction is the channel leading to P₁, which is preferred to that of P₂ due to the comparative lower energy barrier. The formation of P₃ ³C₂H₂+³NH through hydrogen-abstraction mechanism is also feasible, especially at high temperature. The other pathways are less competitive comparatively.     

DPPH (= 2,2‐Diphenyl‐1‐picrylhydrazyl = 2,2‐Diphenyl‐1‐(2,4,6‐trinitrophenyl)hydrazyl) Radical‐Scavenging Reaction of Protocatechuic Acid Esters (= 3,4‐Dihydroxybenzoates) in Alcohols: Formation of Bis‐alcohol Adduct

Protocatechuic acid esters (= 3,4‐dihydroxybenzoates) scavenge ca. 5 equiv. of radical in alcoholic solvents, whereas they consume only 2 equiv. of radical in nonalcoholic solvents. While the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents as compared to that in nonalcoholic solvents is due to a nucleophilic addition of an alcohol molecule at C(2) of an intermediate o‐quinone structure, thus regenerating a catechol (= benzene‐1,2‐diol) structure, it is still unclear why protocatechuic acid esters scavenge more than 4 equiv. of radical (C(2) refers to the protocatechuic acid numbering). Therefore, to elucidate the oxidation mechanism beyond the formation of the C(2) alcohol adduct, 3,4‐dihydroxy‐2‐methoxybenzoic acid methyl ester ( 4 ), the C(2) MeOH adduct, which is an oxidation product of methyl protocatechuate ( 1 ) in MeOH, was oxidized by the DPPH radical (= 2,2‐diphenyl‐1‐picrylhydrazyl) or o‐chloranil (= 3,4,5,6‐tetrachlorocyclohexa‐3,5‐diene‐1,2‐dione) in CD₃OD/(D₆)acetone 3 : 1). The oxidation mixtures were directly analyzed by NMR. Oxidation with both the DPPH radical and o‐chloranil produced a C(2),C(6) bis‐methanol adduct ( 7 ), which could scavenge additional 2 equiv. of radical. Calculations of LUMO electron densities of o‐quinones corroborated the regioselective nucleophilic addition of alcohol molecules with o‐quinones. Our results strongly suggest that the regeneration of a catechol structure via a nucleophilic addition of an alcohol molecule with a o‐quinone is a key reaction for the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents.     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.     

The initiation of ring-opening metathesis polymerisation of norbornadiene by seven-coordinate molybdenum(II) compounds. X-ray crystal structure of [Mo(μ-Cl)(SnCl3)(CO)3(η-NBD)]

The new heterobimetallic complex [Mo(μ-Cl)(SnCl₃)(CO)₃(η⁴-NBD)] (1) has been prepared by reaction of [(CO)₄Mo(μ-Cl)₃Mo(SnCl₃)(CO)₃] with norbornadiene (NBD) at room temperature. The structure of complex 1 was established by X-ray crystallography. The IR, ¹H- and ¹³C-NMR spectra of 1 are also described and can be correlated with the crystallographically observed geometry. In the presence of an excess of NBD compound 1 initiates the ring-opening metathesis polymerisation (ROMP). The initiation mechanism of ROMP by seven-coordinate molybdenum(II) compounds have been discussed. The microstructure of polynorbornadiene formed was determined by ¹H- and ¹³C-NMR spectroscopy.     

Properties of phenoxyl radical of dehydrozingerone, a probable antioxidant

Free radical reactions of dehydrozingerone (DZ), a methoxy phenol, were studied at dfferent pHs with a variety of oxidants using nanosecond pulse radiolysis technique. Hydroxyl radical (OH) reaction with the phenolic form at pH 6 led mainly to the formation of an OH-adduct absorbing at 460 nm in addition to a minor oxidation product. On the other hand, at pH 10 with the deprotonated phenoxide ion, the only reaction observable was oxidation generating a phenoxyl radical absorbing at 360 nm. HPLC analysis indicated formation of two different products at pH 6 from addition and oxidation reactions, whereas at pH 10, only the oxidation product was detectable. Reactions of more specific secondary oxidizing radicals, N3√, Br√, Br⁻₂√ and Tl(II) with DZ gave rise to the phenoxyl radical over the entire pH range. DZ in the phenoxide ion form reacted with nitrogen dioxide and trichloromethyl peroxyl radicals with rate constants 6×10⁸ and 8.8×10⁸ dm³ mol⁻¹ s⁻¹ respectively leading to the phenoxyl radicals. The DZ phenoxyl radical reacted with trolox C (an analogue of -tocopherol) with a rate constant of 8.3×10⁷ dm³ mol⁻¹ s⁻¹. One electron reduction potential of the DZ phenoxyl radical at pH 6 was determined to be +1.1 V vs NHE using N3√/N⁻₃ as the standard couple.     

O2对燃煤烟气中As2 O3均相反应生成途径影响研究

应用量子化学密度泛函理论研究了燃煤烟气中As和AsO与O_2均相生成As_2O_3的反应机理。首先计算确定了各反应物、中间体、过渡态和产物的结构和能量,然后运用热力学和动力学方法对As_2O_3均相生成过程进行分析。结果表明,由As和AsO与O_2均相生成As_2O_3的最大反应能垒分别为32.9和157.2kJ/mol,在烟气中由As转化为As_2O_3更为容易进行。在500-1900 K下,各反应的正逆反应速率常数均随温度的提高而增大,但不同反应过程受温度影响的程度不同。As与O_2反应生成AsO和AsO_2的两个反应过程的平衡常数在所研究的温度范围内均大于10~5,能完全反应,可以认为是单向反应。AsO与O_2反应生成AsO_2的过程平衡常数在所研究的温度范围内小于10~5,反应不完全,转化率低。AsO与AsO_2生成As_2O_3(D3H)构型的平衡常数极低,反应难以进行,而生成As_2O_3(GAUCHE)构型反应能垒低,可自发进行。     

Oxidation of crystal violet and malachite green in aqueous solutions — a kinetic spectrophotometric study

The reactions of two triphenyl methane (TPM) dyes—crystal violet (CV⁺) and malachite green (MG⁺)—with N₃^• and OH^• radicals were studied by pulse radiolytic kinetic spectrophotometry. The rate constants for the reaction of the cationic dyes (D⁺) with N₃^• are (9.0±0.6)×10⁹ and (3.0±0.2)×10⁹ dm³ mol⁻¹ s⁻¹ respectively and those for the reaction with OH^• are obtained as (8.0±0.6)×10⁹ and (1.1±0.1)×10⁹ dm³ mol⁻¹ s⁻¹ respectively. The transient spectra resulting from the oxidation of the dyes were characterized. The time-resolved spectra indicate that the reaction with OH^• radicals initially generates an adduct which subsequently dissociates to form the radical dication D^•2+. The D^•2+ species decay by further reaction with the parent dye.