Micro-imaging of transient guest profiles in nanochannels

Zeolites of type ferrierite are exploited as a host system for monitoring the evolution of guest concentration (methanol) in nanoporous host materials upon adsorption. Additional transport resistances at the crystal surface have been removed so that uptake is exclusively controlled by the diffusion resistance of the pore space. Since the crystal shape deviates from a simple parallelepiped, the primary imaging data do not immediately reflect true local concentrations. A simple algorithm is developed which overcomes this complication. The determined transient concentration profiles ideally comply with the requirements for the application of the Boltzmann-Matano integration method for determining diffusivities. The resulting diffusivities (along the direction of the "10-ring channels") are found to exceed those along the 8-ring channels by three orders of magnitude.     

Sorption Kinetics and Intracrystalline Diffusion of Methanol in Ferrierite: An Example of Disguised Kinetics

Sorption kinetics of methanol in large crystals of ferrierite have been studied in detail by interference microscopy (IFM) and infra-red microscopy (IRM). The IFM measurements yield the transient concentration profiles, thus providing a direct measurement of both the surface resistance to mass transfer and the internal diffusion resistance. It is shown that, for this system, the uptake rate is controlled by the combined effects of surface resistance and diffusion through the 8-ring channels (in the y-direction). Transport through the 10-ring channels (in the z-direction) appears to be blocked by surface resistance. Although the overall uptake curves conform well to the “root t law” the diffusivity values derived from the uptake curves vary widely depending on the assumed direction of diffusion. Even if the correct direction of diffusion is assumed, the diffusivity values derived from the uptake curves are seriously in error as a result of the intrusion of surface resistance. The existence of transport resistances at the crystal surface is clearly apparent from the transient concentration profiles but is not obvious from the uptake curves.     

Imaging of transient guest profiles in nanoporous host materials: a new experimental technique to study intra-crystalline diffusion

The application of interference microscopy (IFM) and infrared microscopy (IRM) to monitoring transient concentration profiles during uptake and release of guest molecules in nanoporous materials has opened a novel technique for diffusion studies with adsorbed molecules. For the first time, the coefficients of transport diffusion and the surface permeabilities have become accessible by direct observation under non-equilibrium conditions. The examples presented in this communication include diffusion and permeation measurements with zeolites of the ferrierite type and with metal-organic frameworks (MOFs) of type ZIF-8     

Analysis of chemical kinetics at the gas-aqueous interface for submicron aerosols

The effect of kinetics of chemical reactions in the gas-liquid interface between atmospheric gases and reactive solute in dilute aqueous aerosols is analysed in order to see if such processes will affect the overall uptake rate. Accordingly, a parameterization of such heterogeneous reactions was derived, taking into account interfacial reactions. Gibbs surface excess concentration of both reactive compounds and stable compounds leads to higher heterogeneous reaction rates in comparison to aqueous phase bulk reactions. An analytical formulation shows that the surface reactions may be of considerable importance for the uptake process in the case of small liquid aerosols even in the absence of organic film on the surface. In particular, we demonstrate that the uptake rate of atmospheric gas-phase oxidants (such as OH, NO(3) or O(3)) reacting with volatile organic compounds (such as ethanol or methanol) is increased by more than 10% for atmospheric aerosols with diameters lower than 0.1 microm. This effect is in addition intensified in the case of reactions of atmospheric oxidants with liquid aerosols containing organic surfactants, such as semi-volatile organic compounds, i.e., the chemical reactions at the gas-liquid interface may be dominant in the main uptake process for atmospheric submicron aerosols.     

In situ study on molecular diffusion phenomena in nanoporous catalytic solids

As an omnipresent phenomenon in nature, diffusion is among the rate-determining processes in many technological processes. This is in particular true for catalytic conversion in nanoporous materials. We provide a critical review of the possibilities of exploring diffusion phenomena over microscopic dimensions in such media by direct experimental observation. By monitoring the probability distribution of molecular displacements as a function of time, the pulsed field gradient technique of NMR (PFG NMR) records the rate of molecular re-distribution. By varying the observation time, PFG NMR is thus able to trace even hierarchies of transport resistances as occurring, e.g., in catalyst particles in the form of binder-compacted assemblages of zeolite crystallites. Alternatively, and complementary to this information, interference microscopy (IFM) and IR microscopy (IRM) are able to follow the evolution of intracrystalline concentration profiles during uptake and release. This allows, in particular, an accurate quantification of the transport resistances on the surface of the individual crystallites and of the probability that reactant molecules from the gas phase, upon colliding with the external surface, are able to penetrate through such "surface barriers" into the crystal bulk phase. Being able to distinguish between different molecular species, IRM is able to record the evolution of intracrystalline concentration profiles even during multi-component adsorption and catalytic reactions (169 references).     

Diffusion kinetics for methanol in polycrystalline ice

Quantitative analyses of the isothermal desorption kinetics from methanol-doped H2O films on Pt(111) reveal that transport kinetics for CH3OH in polycrystalline ice are much slower than previously reported. They also indicate that MeOH displays first-order desorption kinetics with respect to its instantaneous surface concentration below 0.1 mole fraction in ice. These observations allow isothermal desorption rate measurements to be interpreted in terms of a depth profiling analysis providing one-dimensional concentration depth profiles from methanol-doped polycrystalline ice films. Using a straightforward approach to inhibit ice sublimation, transport properties are extracted from the evolution of concentration depth profiles obtained after thermal annealing of binary ice films at high temperature. Heterodiffusion coefficients for methanol in polycrystalline (cubic) ice Ic films are reported for temperatures between 145 and 195 K and for concentrations below 10(-3) mole fraction. Finally, diffusion kinetics for methanol in ice are shown to display a very strong concentration dependence that may contribute, in addition to variations in laboratory samples microstructure, to the disagreements reported in the literature regarding the transport properties of ice.     

Intracrystalline diffusivities and surface permeabilities deduced from transient concentration profiles: methanol in MOF manganese formate

The intracrystalline concentration profiles during molecular uptake of methanol by an initially empty, single crystal of microporous manganese(II) formate (Mn(HCO2)2), representing an ionic inorganic-organic hybrid within the MOF family, are monitored by interference microscopy. Within these profiles, a crystal section could be detected where over the total of its extension ( approximately 2 microm x 50 microm x 30 microm) molecular uptake ideally followed the pattern of one-dimensional diffusion. Analysis of the evolution of intracrystalline concentration in this section directly yields the permeability of the crystal surface and the intracrystalline diffusivity as a function of the concentration of the total range of 0 相似文献   

Modeling of preparative chromatography processes with slow intraparticle mass transport kinetics

Mathematical modeling of the preparative chromatography process accompanied with complex intraparticle mass transport mechanism involving surface diffusion is discussed. As an experimental base for the analysis two steroid compounds, methyl esters of hydroxycholanic acids (bile acids), deoxycholic and cholic acids were selected. For these compounds surface diffusion kinetics were found to have a marked influence on the band broadening. The isocratic chromatography process was performed in a normal-phase preparative system with ternary mixture of solvents containing hexane, ethyl acetate and methanol as a modifier under different operating conditions, e.g., at various mobile phase compositions and inlet concentrations. The efficiency of the system was found to be dependent on the mass of sample injected as well as on the contents of the modifier. Such a phenomenon was suggested to originate from the contribution of the surface diffusion kinetics to the overall mass transport mechanism. For identifying the general trends and concentration dependencies of the surface diffusion coefficient the simplified approach was proposed. The set of chromatographic band profiles registered at different inlet concentration and mobile phase composition were used for determining the influence of the local solid-phase concentration on the mass transport mechanism. For the simulations the transport-dispersive model was used, in which all sources of mass transport resistances were lumped in the properly adjusted mass transport coefficient. The accuracy of this model was verified by comparing its predictions to the solutions of the general rate model.     

Ensemble Measurement of Diffusion: Novel Beauty and Evidence

Recording the evolution of concentration profiles in nanoporous materials opens a new field of diffusion research with particle ensembles. The technique is based on the complementary application of interference microscopy and IR micro‐imaging. Combining the virtues of diffusion measurements with solids and fluids, it provides information of unprecedented wealth and visual power on transport phenomena in molecular ensembles. These phenomena include the diverging uptake and release patterns for concentration‐dependent diffusivities, the mechanisms of mass transfer at the fluid–solid interface and opposing tendencies in local and global concentration evolution.     

Surface induced hydrogen-bonded macrocluster formation of methanol on silica surfaces

Recently, we have succeeded in identifying the structure of the adsorption layer of ethanol on a silica surface in cyclohexane to be a hydrogen-bonded linear aggregate (polymer), which we call a surface molecular macrocluster. In this work, we studied the effect of the miscibility of liquids on the formation of the surface molecular macroclusters for confirming that this is a surface induced phenomenon. We investigated the interaction and the structure of methanol adsorbed on a silica surface in methanol-cyclohexane binary liquids by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode, and compared the results with those of the ethanol-cyclohexane and 1-propanol-cyclohexane binary liquids. The former system is immiscible at methanol concentrations of ca. 8-90 mol %, and the latter two are miscible at any composition. At 0.03 mol % methanol, which is far from the critical concentration for the phase separation, the contact of the methanol macrocluster layers formed on the silica surface brought about the attraction from a distance of 42 +/- 5 nm which was similar to that observed in ethanol-cyclohexane. At a methanol concentration of 9.0 mol %, above bulk phase separation, completely different force profiles were observed. These results demonstrated that the molecular macrocluster formation was different from the wetting induced by the bulk.     

Photostability Study of Nanoporous TiO2 Film Electrodes in Basic Solutions

The nanoporous TiO2 film electrodes have been prepared by a sol-gel deposition process The photostability of the electrodes in basic solutions has been studied. The results show that the photostability of the electrodes decreases rapidly in strong basic solutions with or without methanol. The reaction of holes to O^2- produces active O^2- atoms and the products O^2- atomsoxidize Ti^3 to Ti^4 on TiO2 film surface and subsurface. This results in the TiO2 film electrodes unstable in basic solutions both without methanol and with too low concentration.     

Analysis of mass transport models for protein adsorption to cation exchanger by visualization with confocal laser scanning microscopy

The mass transfer of bovine serum albumin (BSA) to a cation exchanger, SP Sepharose FF, has been studied by finite batch adsorption experiments. The uptake curve was simulated with three mass transport models (i.e., effective pore diffusion model, surface diffusion model and Maxwell-Stefan model) incorporating the particle size distribution of the adsorbent particles. All the three models can simulate the uptake curves reasonably well. However, how well these models could simulate the real concentration profile within the adsorbent particle cannot be verified by the fitness of the models to the uptake curve. Thus, confocal laser scanning microscopy (CLSM) was used to visualize protein uptake to the porous adsorbent particles during the batch experiments. Using a fluorescent dye-labeled bovine serum albumin (BSA) for the dynamic adsorption experiments, the radial concentration profiles of the labeled BSA molecules into individual adsorbent particles at different times were obtained from the CLSM images. The protein distribution profiles within various particle diameters at different time were compared with the radial protein distributions predicted from the models. It reveals that surface diffusion model describes the intraparticle protein concentration profiles better than the other two models.     

Internal concentration gradients of guest molecules in nanoporous host materials: measurement and microscopic analysis

Evolution of internal concentration profiles of methanol in 2-D pore structure of ferrierite crystal was measured in the pressure range of 0 to 80 mbar with the help of the recently developed interference microscopy technique. The measured profiles showed that both a surface barrier and internal diffusion controlled the kinetics of adsorption/desorption. Furthermore, they indicated that in the main part of the crystal, the z-directional 10-ring channels were not accessible to methanol and that the transport of methanol mainly occurred via 8-ring y-directional channels. The roof-like part of the crystal was almost instantaneously filled/emptied during adsorption/desorption, indicating accessible 10-ring channels in this section. The measured profiles were analyzed microscopically with the direct application of Fick's second law, and the transport diffusivity of methanol in ferrierite was determined as a function of adsorbed phase concentration. The transport diffusivity varied by more than 2 orders of magnitude over the investigated pressure range. Transport diffusivities, calculated from measured profiles from small and large pressure step changes, were all found to be consistent. Simulated concentration profiles obtained from the solution of Fick's second law with the calculated functional dependence of diffusivities on concentration compared very well with the measured concentration profiles, indicating validity and consistency of the measured data and the calculated diffusivities. The results indicate the importance of measuring the evolution of concentration profiles as this information is vital in determining (1) the direction of internal transport, (2) the presence of internal structural defects, and (3) surface/internal transport barriers. Such detailed information is available neither from common macroscopic methods since, they measure changes in macroscopic properties and use model assumptions to predict the concentration profiles inside, nor from microscopic methods, since they only provide information on average displacement of diffusing molecules.     

Sulfonated poly(ether ether ketone)/polyaniline composite proton-exchange membrane

Sulfonated poly(ether ether ketone) (PEEK) was prepared by sulfonation of commercial Victrex^@ PEEK and degree of sulfonation was found to be about 44.5% by ¹H NMR. Sulfonated PEEK/polyaniline composite membranes, in order to prevent methanol crossover, were prepared by chemical polymerization of a thin layer of polyaniline (PANI) in the presence of a high oxidant concentration on a single face modification. FTIR and PANI coating density studies confirmed the loading of PANI in sulfonated PEEK membrane matrix. PANI composite membranes with different polymerization time were prepared and subjected to thermogravimetric analysis as well as electrochemical and methanol permeability study to compare with sulfonated PEEK and Nafion 117 membrane. Ion-exchange capacity, water uptake, proton transport numbers and proton conductivities for different PANI composite sulfonated PEEK (SPEEK) membranes were found to be dependent on the coating density of the PANI in the membrane matrix and were slightly lower than that of Nafion 117 membrane. Methanol permeability of these membranes (especially SPEEK/PANI-1.5) was about four times lower than Nafion 117 membrane. Among the all SPEEK membranes synthesized in this study, SPEEK-1.5 appears to be more suitable for direct methanol fuel cell (DMFC) application considering optimum physicochemical and electrochemical properties, thermal stability as well as very low methanol permeability. Above all, the cost-effective and simple fabrication technique involved in the synthesis of such composite membranes makes their applicability quite attractive.     

Uptake and surface reaction of methanol by sulfuric acid solutions investigated by vibrational sum frequency generation and Raman spectroscopies

The uptake of methanol at the air-liquid interface of 0-96.5 wt % sulfuric acid (H2SO4) solutions has been observed directly using vibrational sum frequency generation (VSFG) spectroscopy. As the concentration of H2SO4 increases, the VSFG spectra reveal a surface reaction between methanol and H2SO4 to form methyl hydrogen sulfate. The surface is saturated with the methyl species after 15 min. The uptake of methyl species into the solutions by Raman spectroscopy was also observed and occurred on a much longer time scale. This suggests that uptake of methanol by sulfuric acid solutions is diffusion-limited.     

Platinum catalysed nanoporous titanium dioxide electrodes in H2SO4 solutions

The preparation and electrochemistry of dispersed Pt metal on nanoporous titanium dioxide coatings is described. It is shown that photocatalytic deposition of Pt centres on a nanoporous titanium dioxide layer fabricated from TiO₂ nanoparticles leads to high surface area electrocatalysts. The reactions investigated are the evolution of hydrogen and the oxidation of carbon monoxide and methanol.     

Stress-induced diffusion of macromolecules

A framework for analysis of stress-induced diffusion is presented. Diffusion of macromolecules is considered to be driven by gradients of entropic potential arising from distortion of the molecular conformation by deformation, as well as by gradients of concentration of individual molecular weight species. Resulting concentration profiles in circular capillary flow have been calculated for a system containing a single macromolecular species. Significant variations in concentration with capillary radius are predicted at full development. Estimates of the dynamics of development of these profiles indicate that the length to diameter ratios needed to see a measurable effect are proportional to the Peclet number, which may be quite large for macromolecular fluids depending on the geometry and flow velocity of the system. This effect may have implications in the rheology, chromatography, and technological uses of macromolecular fluids.     

Platinum-coated gold nanoporous film surface: electrodeposition and enhanced electrocatalytic activity for methanol oxidation

This report describes the preparation of Pt-nanoparticle-coated gold-nanoporous film (PGNF) on a gold substrate via a simple "green" approach. The gold electrode that has been anodized under a high potential of 5 V is reduced by freshly prepared ascorbic acid (AA) solution to obtain gold nanoporous film electrode. Then the Pt nanoparticle is grown on the electrode by cyclic voltammetry (CV). The resulting PGNF electrode has highly ordered arrangement and large surface area, as verified by scanning electron microscopy (SEM) and CV, suggesting that the nanoporous gold film electrode provides a good matrix for obtaining PGNF with high surface area. Furthermore, the as-prepared PGNF electrode exhibited high electrocatalytic activity toward methanol oxidation in a 0.5 M H 2SO 4 solution containing 1.5 M methanol. The present novel strategy is expected to reduce the cost of the Pt catalyst remarkably.     

Determination of the distance-dependent viscosity of mixtures in parallel slabs using non-equilibrium molecular dynamics

We generalize a technique for determination of the shear viscosity of mixtures in planar slabs using non-equilibrium computer simulations by applying an external force parallel to the surface generating Poiseuille flow. The distance-dependent viscosity of the mixture, given as a function of the distance from the surface, is determined by analysis of the resulting velocity profiles of all species. We present results for a highly non-ideal water + methanol mixture in the whole concentration range between rutile (TiO(2)) walls. The bulk results are compared to the existing equilibrium molecular dynamics and experimental data while the inhomogeneous viscosity profiles at the interface are interpreted using the structural data and information on hydrogen bonding.     

Assessment of metals bound to marine plankton proteins and to dissolved proteins in seawater

Studies based on laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP-MS) have been performed to assess metal bound to dissolved proteins and proteins from marine plankton after two-dimensional polyacrylamide gel electrophoresis (2D PAGE). Dissolved proteins were pre-concentrated from surface seawater (60 L) by tangential ultrafiltration with 10 kDa molecular weight cut-off (MWCO) membranes and further centrifugal ultrafiltration (10 kDa) before proteins isolation by methanol/chloroform/water precipitation. Proteins isolation from plankton was assessed after different trichloroacetic acid (TCA)/acetone and methanol washing stages, and further proteins extraction with a phenol solution. LA–ICP-MS analysis of the electrophoretic profiles obtained for dissolved proteins shows the presence of Cd, Cr, Cu, and Zn in five spots analyzed. These proteins exhibit quite similar molecular weights (within the 10–14 kDa range) and pIs (from 5.8 to 7.3). Cd, Cr, Cu, and Zn have also been found to be associated to proteins isolated from plankton samples. In this case, Cd has been found to be bound to proteins of quite different molecular weight (9, 13 and 22 kDa) and pIs (4.5, 5.2, 5.5, and 10). However, trace elements such as Cr, Cu and Zn appear to be mainly bound to plankton proteins of low molecular weight and variable pI.