Ultra thin V2O3 films grown on oxidized Si(1 1 1)

The growth of V₂O₃(0 0 0 1) has been investigated by scanning tunnelling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). Direct evaporation of vanadium onto the Si(1 1 1)-7 × 7 substrate gives rise to massive surface intermixing and consequent silicide formation. In order to obtain the vanadium oxide with good quality, the 7 × 7 surface was initially partially oxidized which leads to a smooth oxygen–silicon surface layer which in turn prevents a complete vanadium–silicon alloy formation. Finally a vanadium oxide film of V₂O₃ stoichiometry was created. The grown film exposes single crystalline areas of stepped surfaces which appear azimuthally randomly-oriented.     

Formation of a √3 × √3 surface on Si/Ge(1 1 1) studied by STM and LEED

We have performed a detailed study of the formation and the atomic structure of a √3 × √3 surface on Si/Ge(1 1 1) using both scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). Both experimental methods confirm the presence of a √3 × √3 periodicity but unlike the Sn/Ge(1 1 1) and the Sn/Si(1 1 1) surfaces, the Si/Ge(1 1 1) surface is not well ordered. There is no long range order on the surface and the √3 × √3 reconstruction is made up of double rows of silicon atoms separated by disordered areas composed of germanium atoms.     

Tetra-σ bonding adsorption of pyridine on Si(1 0 0)-2 × 1

We studied adsorption of pyridine on Si(1 0 0) at room temperature using high resolution photoemission spectroscopy (PES) and near edge X-ray adsorption fine structure (NEXAFS) in the partial electron yield (PEY) mode. The Si 2p, C 1s, N 1s spectra of pyridine on Si(1 0 0) showed that pyridine is chemisorbed on Si(1 0 0)-2 × 1 through the formation of the tetra-σ-bonded structure with the N atom and three C atoms. NEXAFS was conducted to characterize the adsorption geometry of pyridine on Si(1 0 0). The π* orbital of CC bond showed a good angle dependence in C K-edge NEXAFS spectra, and we were able to estimate the adsorption angle between chemisorbed pyridine of CC bond and the Si(1 0 0) surface using an analytical solution of NEXAFS intensity. We find the coexistence of two different tight bridges with the adsorption angles 42 ± 2° and 45 ± 2° with almost equal abundance.     

Theoretical studies of Sm/Si(1 1 1)–n × 1 (n = 5, 7) and Sm/Si(1 1 1)–(8 × 2) structures

In this study we employ a state-of-the-art pseudopotential method to perform local density of states (LDOS) calculations of n × 1 (n = 5, 7) and (8 × 2) reconstructions induced by the adsorption of rare-earth samarium (RE) in the submonolayer range. We conducted a full comparison between images from scanning tunneling microscopy (STM) and theoretical LDOS. Images taken of both filled and empty states show the effects induced by honeycomb chains and Seiwatz chains. We conclude that LDOS calculations are consistent with the assignment of features observed experimentally by STM.     

Core-level shifts of InP(1 0 0)(2 × 4) surface: Theory and experiment

Surface core-level shifts (SCLSs) of the (2 × 4)-reconstructed InP(1 0 0) surface with the established mixed In–P dimer structure have been investigated by first-principles calculations and photoelectron spectroscopy. Theoretical values were calculated using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation energy functional. The obtained theoretical values are quite similar within both approximations. The found differences originate in the tiny structural differences. It is concluded that the expansion or contraction of the crystal lattice has smaller effect on the SCLSs than the geometrical details of the reconstruction, which suggests that the Madelung potential has the dominant effect on the SCLSs. The results support the presence of a P 2p peak at higher binding energy (BE) compared to bulk peak, as proposed with recent measurements [P. Laukkanen, J. Pakarinen, M. Ahola-Tuomi, M. Kuzmin, R. E. Perälä, I. J. Väyrynen, A. Tukiainen, V. Rimpiläinen, M. Pessa, M. Adell, J. Sadowski, Surf. Sci. 600 (2006) 3022], and reveal several hitherto not reported SCLSs. The calculated SCLSs reproduce the measured spectra within reasonable accuracy. Furthermore, the atomic origins of the InP(1 0 0)(2 × 4) SCLSs are solved. In particular, it is shown that the lowest SCLS of P 2p of the InP(1 0 0)(2 × 4) arises from the topmost In–P dimers.     

Hydrogen adsorption on GaAs(0 0 1)-c(4 × 4)

Exposure of the As-terminated GaAs(0 0 1)-c(4 × 4) reconstructed surface to atomic hydrogen (H) at different substrate temperatures (50-480 °C) has been studied by reflection high-energy electron diffraction (RHEED) and scanning tunnelling microscopy (STM). Hydrogen exposure at low temperatures (∼50 °C) produces a disordered (1 × 1) surface covered with AsH_x clusters. At higher temperatures (150-400 °C) exposure to hydrogen leads to the formation of mixed c(2 × 2) and c(4 × 2) surface domains with H adsorbed on surface Ga atoms that are exposed due to the H induced loss of As from the surface. At the highest temperature (480 °C) a disordered (2 × 4) reconstruction is formed due to thermal desorption of As from the surface. The results are consistent with the loss of As from the surface, either through direct thermal desorption or as a result of the desorption of volatile compounds which form after reaction with H.     

Observation of charge transfer states of F4-TCNQ on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface

We have investigated the valence electronic states of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface using valence photoelectron spectroscopy. Since the electron affinity of condensed F₄-TCNQ is 5.24 eV and the energy from the valence band maximum of the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface to the vacuum level is 4.1 eV, spontaneous charge transfer would be expected in the present system. At sub-monolayer coverage of F₄-TCNQ, characteristic peaks are observed at 1.1 and 2.5 eV below Fermi energy. The former peak is assigned to a singly occupied affinity level, and the latter is ascribed to a relaxed highest occupied molecular orbital of adsorbed F₄-TCNQ. The work function change is increased up to +1.3 eV as a function of F₄-TCNQ coverage. These results support the occurrence of charge transfer into F₄-TCNQ on the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface.     

Adsorption of an organic zwitterion on a Si(1 1 1)-7 × 7 surface at room temperature

The couple sulfonato/Si(1 1 1)-7 × 7 leads to remarkable 2D chiral molecular assembly with a stability improved at room temperature. The voltage-dependency of the STM images has been experimentally investigated and the correlation between STM images and PDOS has been studied. The proposed empirical model of the adsorption of molecules on Si(1 1 1)-7 × 7 has been justified by the experimental and theoretical data.     

Stabilization of the (1 1 0) tetragonal zirconia surface by hydroxyl chemical transformation

Different hydroxyl coverages on the (1 1 0) and (1 0 1) surfaces of tetragonal zirconia have been studied with periodic density functional theory. The tetragonal zirconia (1 1 0) surface is polar and intrinsically unstable. It is however very efficiently stabilized by hydroxyl formation which decreases the effective charge of surface oxygen atoms and hence avoids the electrostatic instability. The hydroxylation induces a strong stabilization of the (1 1 0) surface with respect to the non-polar (1 0 1) termination, and explains why the (1 1 0) surface of ZrO₂ can be found in some catalytic preparations. Surface chemical transformation appears to be a more efficient way to stabilize the (1 1 0) surface in comparison with the surface reconstruction processes.     

Boron and indium incorporation in GaP(0 0 1) surfaces by vapour deposition: Density-functional supercell calculations of the surface stability

Using surface supercells and the density-functional method, surface formation energies are calculated for probable GaP(0 0 1) reconstructions without and with indium or/and boron substitutions. Obtained surface stability diagrams provide surface compositions and surface structures in dependence on the growth conditions: indium atoms are built into the c(4 × 4) patterns under strongly P-rich conditions and into the β2(2 × 4) reconstruction under less P-rich conditions. Under In-rich and non-P-rich conditions, initial structures of metallic InGa phases are formed in the (2 × 4) mixed-dimer reconstruction. In the c(4 × 4) and (2 × 4) mixed-dimer patterns the full range of In:Ga content is accessible by variation of the In:Ga ratio in the gas phase. Boron can be built into the c(4 × 4) patterns of the GaP(0 0 1) surface in form of isolated atoms or nearest-neighbours under strongly P-rich and moderately to strongly B-rich conditions. The boron incorporation is strongly enhanced at the surface in respect to theoretical predictions for the bulk, what explains the larger content found experimentally. Assuming P-rich conditions, which are suitable for the growth of the ternary alloys, the obtained surface stability diagram for the quaternary (BInGa)P shows that nearly the full range of In:Ga content is accessible. However, the boron content in the alloy is restricted as found analogously for (BGa)P and is independent of the indium content. The expected increase of the boron content in presence of indium cannot be confirmed. Contrary to the analogous GaAs systems, boron atoms do not substitute phosphor atoms (antisite position) in GaP, (InGa)P, (BGa)P, and (BInGa)P.     

Scanned-probe topological and spectroscopic study of surface states on clean and Si-deposited GaAs (0 0 1)-c(4×4) surfaces

Microscopic topological and spectroscopic properties of MBE-grown GaAs c(4×4) surfaces without and with monolayer Si deposition were investigated by the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). Empty state STM images on as-grown surface showed bright and dark cells, and they exhibited strong correlation with the spatial distribution of normal and anomalous conductance gaps of the STS spectra. Bias dependent STM images indicated presence of pinning areas with continuous space and energy distribution of surface gap states. By deposition of monolayer Si, dark areas reduced a great deal and the rate of finding normal STS spectra increased, indicating large reduction of surface states.     

Structural properties of Cu clusters on Si(1 1 1):Cu2Si magic family

Basing on the results of the scanning tunneling microscopy (STM) observations and density functional theory (DFT) calculations, the structural model for the Cu magic clusters formed on Si(1 1 1)7 × 7 surface has been proposed. Using STM, composition of the Cu magic clusters has been evaluated from the quantitative analysis of the Cu and Si mass transport occurring during magic cluster converting into the Si(1 1 1)‘5.5 × 5.5’-Cu reconstruction upon annealing. Evaluation yields that Cu magic cluster accommodates 20 Cu atoms with 20 Si atoms being expelled from the corresponding 7 × 7 half unit cell (HUC). In order to fit these values, it has been suggested that the Cu magic clusters resemble fragments of the Cu₂Si-silicide monolayer incorporated into the rest-atom layer of the Si(1 1 1)7 × 7 HUCs. Using DFT calculations, stability of the nineteen models has been tested of which five models appeared to have formation energies lower than that of the original Si(1 1 1)7 × 7 surface. The three of five models having the lowest formation energies have been concluded to be the most plausible ones. They resemble well the evaluated composition and their counterparts are found in the experimental STM images.     

Atomic and electronic properties of furan on the Si(0 0 1)-(2 × 2) surface

The atomic and electronic properties of the adsorption of furan (C₄H₄O) molecule on the Si(1 0 0)-(2 × 2) surface have been studied using ab initio calculations based on pseudopotential and density functional theory. We have considered two possible chemisorption mechanisms: (i) [4 + 2] and (ii) [2 + 2] cycloaddition reactions. We have found that the [4 + 2] interaction mechanism was energetically more favorable than the [2 + 2] mechanism, by about 0.2 eV/molecule. The average angle between the CC double bond and Si(1 0 0) surface normal was found to be 22°, which is somewhat smaller than the experimental value of 28°, but somewhat bigger than other theoretical value of 19°. The electronic band structure, chemical bonds, and theoretical scanning tunneling microscopy images have also been calculated. We have determined a total of six surface states (one unoccupied and five occupied) in the fundamental band gap. Our results are seen to be in good agreement with the recent near edge X-ray absorption fine structure and high resolution photoemission spectroscopy data.     

A novel (8 × 4) superstructure as precursor to the c(4 × 4) phase during Sb/Si(0 0 1) desorption

The role of kinetics in the superstructure formation of the Sb/Si(0 0 1) system is studied using in situ surface sensitive techniques such as low energy electron diffraction, Auger electron spectroscopy and electron energy loss spectroscopy. Sb adsorbs epitaxially at room-temperature on a double-domain (DD) 2 × 1 reconstructed Si(0 0 1) surface at a flux rate of 0.06 ML/min. During desorption, multilayer Sb agglomerates on a stable Sb monolayer (ML) in a DD (2 × 1) phase before desorbing. The stable monolayer desorbs in the 600–850 °C temperature range, yielding DD (2 × 1), (8 × 4), c(4 × 4), DD (2 × 1) phases before retrieving the clean Si(0 0 1)-DD (2 × 1) surface. The stable 0.6-ML (8 × 4) phase here is a precursor phase to the recently reported 0.25-ML c(4 × 4) surface phase, and is reported for the first time.     

Optical anisotropy of GaNAs grown on GaAs(0 0 1) substrate

In this paper GaN_xAs_1−x surfaces during growth are observed using reflectance difference or reflectance anisotropy spectroscopy (RDS or RAS). The epi-layer was grown by solid-source molecular beam epitaxy (MBE) system with a RF nitrogen prasma source. RD spectra showed broader structure and reduced amplitude compared to those of GaAs surfaces; GaAs(2 × 4)-like features were still observed with weak and blue-shifted peaks. In the low growth temperature region, an extra structure was also observed around 3.02 eV. We proposed that GaN_xAs_1−x surface can be classified into three types of the surface.     

Ga-induced superstructures on the Si(1 1 1) 7 × 7 surface

Monolayer Ga adsorption on Si surfaces has been studied with the aim of forming p-delta doped nanostructures. Ga surface phases on Si can be nitrided by N₂⁺ ion bombardment to form GaN nanostructures with exotic electron confinement properties for novel optoelectronic devices. In this study, we report the adsorption of Ga in the submonolayer regime on 7 × 7 reconstructed Si(1 1 1) surface at room temperature, under controlled ultrahigh vacuum conditions. We use in-situ Auger electron spectroscopy, electron energy loss spectroscopy and low energy electron diffraction to monitor the growth and determine the properties. We observe that Ga grows in the Stranski-Krastanov growth mode, where islands begin to form on two flat monolayers. The variation in the dangling bond density is observed during the interface evolution by monitoring the Si (LVV) line shape. The Ga adsorbed system is subjected to thermal annealing and the residual thermal desorption studied. The difference in the adsorption kinetics and desorption dynamics on the surface morphology is explained in terms of strain relaxation routes and bonding configurations. Due to the presence of an energetic hierarchy of residence sites of adatoms, site we also plot a 2D phase diagram consisting of several surface phases. Our EELS results show that the electronic properties of the surface phases are unique to their respective structural arrangement.     

The Si(001) c(4×4) surface reconstruction: a comprehensive experimental study

We have carried out a comprehensive experimental study of the Si(001) c(4×4) surface reconstruction by scanning tunneling microscopy (STM) (at room temperature and elevated temperatures), Auger electron spectroscopy (AES), reflection high-energy electron diffraction (RHEED) and low-energy electron diffraction (LEED). Si(001) samples were kept under ultra-high vacuum (UHV) at around 550°C until the c(4×4) reconstruction appeared. STM contrast of the c(4×4) reconstruction is strongly influenced by electronic effects and changes considerably over a range of bias voltages.

The c(4×4) surface reconstruction is a result of stress which is caused by incorporation of impurities or adsorbates in sub-surface locations. The resulting c(4×4) reconstruction in the top layer is a pure silicon structure. The main structural element is a one-dimer vacancy (1-DV). At this vacancy, second layer Si-atoms rebond and cause the adjacent top Si-dimers to brighten up in the STM image at low bias voltages. At higher bias voltage the contrast is similar to Si-dimers on the (2×1) reconstructed Si(001). Therefore, besides the 1-DV and the two adjacent Si-dimers, another Si-dimer under tensile stress may complete the 4× unit cell. This is a refinement of the missing dimer model.     

Density-functional study of the CO chemisorption on bimetallic Pd–Sn(1 1 0) surfaces

We study the ordered PdSn c(2 × 2), (2 × 1), and PdSn₂ (3 × 1) overlayers deposited on Pd(1 1 0) by using first-principles density-functional calculations. It appears that the two PdSn structures are almost degenerate in the energy. Pd–Sn surfaces we consider do not display the marked buckling with Sn atoms displaced towards vacuum that is common for Pt–Sn surfaces. Low-coverage CO chemisorption at these overlayers and on analogous surface structures on Pd₃Sn is considered. It is shown that inclusion of an empirical correction to the CO adsorption energy changes the stable adsorption site from the long-bridge to the top one in most cases. The adsorption energy decreases with the number of Sn atoms in the vicinity of the adsorption site, and this property correlates well with the position of the centre of gravity of the local Pd d-electron band, and also with the variation of the local density of d-electron states at the Fermi level. The centre-of-gravity value is used to assess the core-level shifts for Pd atoms in various geometries. Most of the calculated data compare rather well with the recent measurements on Pd–Sn overlayers at Pd(1 1 0) as well as with other data on related bimetallic systems.     

The electrodeposition of copper onto UHV-prepared GaAs(0 0 1) surfaces

Synchrotron surface X-ray diffraction has been used to investigate in situ the morphology and epitaxy of monolayer amounts of copper electrodeposited from aqueous electrolyte onto ultra-high vacuum prepared, smooth, Ga- or As-terminated GaAs(0 0 1) surfaces. The fcc lattice of the epitaxial Cu islands is rotated by 5° and tilted by about 9° with respect to the GaAs substrate lattice, leading to eight symmetry equivalent domains of Cu islands terminated by {1 1 1} facets.     

STM image visualization of Si(1 1 1) 7 × 7 surface (graphic simulation and implementation)

The possibilities of graphic STM image simulation of a clean Si(1 1 1) 7 × 7 surface at atomic level are indicated. The presented procedure takes into account various types of deformation on the surface near the Fermi level in order to classify them and explain their origin. It also gives a clear hint to insert relevant physical phenomena in a suggested analysis. This goal is achieved exploiting the results of DAS (dimmer adatom stacing fault) model by means of standard mathematical programmes. A clean Si(1 1 1) 7 × 7 surface is considered as the representative example, but similar evaluation is possible for another non-metal and metal surfaces.