环钯化合物合成及其在催化中的应用

环钯化合物由于丰富的结构、高度的稳定性和卓越的催化性能,已成为钯化学研究的热点之一。迄今已开发出了C-H键活化、氧化加成、转金属化、亲核加成和配体交换等多种方法,可制备出从三元环到十一元环的CY型环钯化合物和多种YCY型环钯化合物。环钯化合物目前已应用于偶联、烯烃氢化和不对称催化等反应中。本文简单介绍了环钯化合物的种类,重点介绍了环钯化合物的合成方法和催化应用情况,最后提出了环钯化合物在今后合成研究和催化应用中的发展建议。     

环钯化合物在Heck反应中的应用研究

钯催化交叉偶联反应在化学工业、合成天然产物及生物活性物质中有着广泛的应用。催化剂体系是交叉偶联反应研究的核心。环钯化合物结构简单、性能稳定,在催化交叉偶联反应中具有高活性、高选择性,引起研究者们的极大关注,不断有新的环钯化合物被合成出来,其催化性能也得到了研究。本文综述了环钯化合物的合成方法及其在Heck反应中的应用。     

环钯化合物在Heck反应中的应用研究

钯催化交叉偶联反应在化学工业、合成天然产物及生物活性物质中有着广泛的应用.催化剂体系是交叉偶联反应研究的核心.环钯化合物结构简单、性能稳定,在催化交叉偶联反应中具有高活性、高选择性,引起研究者们的极大关注,不断有新的环钯化合物被合成出来,其催化性能也得到了研究.本文综述了环钯化合物的合成方法及其在Heck反应中的应用.     

环钯化合物在Heck反应中的应用研究

钯催化交叉偶联反应在化学工业、合成天然产物及生物活性物质中有着广泛的应用.催化剂体系是交叉偶联反应研究的核心.环钯化合物结构简单、性能稳定,在催化交叉偶联反应中具有高活性、高选择性,引起研究者们的极大关注,不断有新的环钯化合物被合成出来,其催化性能也得到了研究.本文综述了环钯化合物的合成方法及其在Heck反应中的应用.     

缬氨醇衍生的手性二茂铁亚胺环钯化合物的合成及晶体结构

含氮配位基团的二茂铁衍生物的环钯化合物在有机合成、催化等领或有着重要的应用,尽管目前已经合成了从多的二茂铁环钯化合物,但其中绝大部分为外消旋体。二茂铁是引入平面手性的理想骨架,通过经典的拆分方法或利用光学纯的二茂铁配体进行不对称环钯化反应可得到具有平面手性的二茂铁环钯化合物,研究发现,利用平面手性的二茂铁环钯化合物与金属汞嘲、锡等的金属转移反应可方便地制备平面构型保持的手性环汞、环锡化合物;还可将它们用于外消旋氨基酸的手性拆分及催化不对称Claisen重排反应（ee值最高可达95％）。     

N-环钯化二茂铁衍生物的合成和应用（英文）

近年研究表明二茂铁的环钯化衍生物被广泛地应用于各类偶联反应中,比如Heck反应、Suzuki反应、aza-Claisen重排反应等.主要综述了含氮导向基的二茂铁衍生物的环钯化反应,包括通过不对称诱导或拆分手段合成具有平面手性环钯化合物,基于环金属化反应1,1'-取代二茂铁钯化物的合成,以及其在催化反应的应用.     

含有酯基二茂铁亚胺环钯化合物催化Suzuki和Heck反应

合成并表征了系列含有酯基二茂铁亚胺环钯化合物.结果表明,该系列环钯催化剂在纯水或有机溶剂中均能高效催化Heck和Suzuki偶联反应.     

两亲性芳香亚胺环钯化合物及其Langmuir-Blodgett膜的制备、表征及催化活性

合成并表征了一系列新型两亲性芳香亚胺环钯化合物.结果显示,该系列环钯催化剂可高效催化均相条件下的Heck和Suzuki偶联反应.将两亲性芳香亚胺环钯二聚体制成LB膜,其在异相条件下的催化活性是均相条件下的25倍.     

2,3-联烯醇及其衍生物的反应

2,3-联烯醇是一类含1,2-二烯官能团和羟基的化合物, 具有很高的反应活性, 它及其衍生物是一类重要的联烯化合物. 概述了2,3-联烯醇及其衍生物的反应, 包括2,3-联烯醇在过渡金属催化下的自身异构环化反应、钯催化的偶联反应、钌催化的环羰基化反应、不同条件下不同方式的扩环反应、亲电试剂参与的反应、分子内环加成反应、自由基反应等和2,3-联烯醇衍生物在零价钯催化下基于亚甲基-π-烯丙基钯中间体生成联烯或1,3-共轭二烯的区域选择性反应, S_N2'类型的加成-消除反应, 二价钯催化下的分子内环化反应以及重排反应等.     

钯催化重氮化合物反应的研究进展

重氮化合物在过渡金属催化剂作用下的分解以及后续反应在有机合成上得到了非常广泛的应用. 综述了近年来钯催化重氮化合物反应的研究进展, 主要包括环丙烷化反应、聚合反应、插入反应、交叉偶联反应及其机理的探讨.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.