Dc and ac electrical conductivity of bulk CdSexTe1−x (0x0.4)

Measurements of the dc and ac conductivity were made for polycrystalline CdSe_xTe_1−x (0x0.4) at various frequencies (0.1–100 kHz) and at various temperatures (293–413 K). The temperature dependence of the dc conductivity was measured in the temperature range (293–413 K). It was found that the obtained dc activation energy for the investigated compositions decrease with the increase of Se content. The ac conductivity is found to be frequency and temperature dependent and obeys the Aω^s law, where s decreases with the increase of temperature. The ac conductivity of these compositions are explained on the basis of the correlated barrier hopping model.     

Structure, ferroelectric and piezoelectric properties of (Bi1−x−yNa0.925−x−yLi0.075)0.5BaxSryTiO3 lead-free piezoelectric ceramics

Lead-free multi-component ceramics (Bi_1−x−yNa_{0.925−x−y}Li_0.075)_0.5Ba_xSr_yTiO₃ have been prepared by an ordinary sintering technique and their structure and electrical properties have been studied. All the ceramics can be well-sintered at 1100 °C. X-ray diffraction patterns shows that Li⁺, Ba²⁺ and Sr²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure, and a morphotropic phase boundary (MPB) is formed at 0.04 < x < 0.08. As compared to pure Bi_0.5Na_0.5TiO₃ ceramic, the coercive field E_C of the ceramics decreases greatly and the remanent polarization P_r of the ceramics increases significantly after the formation of the multi-component solid solution. Due to the MPB, lower E_C and higher P_r, the piezoelectricity of the ceramics is greatly improved. For the ceramics with the compositions near the MPB (x = 0.04–0.08 and y = 0.02–0.04), piezoelectric coefficient d₃₃ = 133–193 pC/N and planar electromechanical coupling factor k_P = 16.2–32.1%. The depolarization temperature T_d reaches a minimum value near the MPB. The temperature dependences of the ferroelectric and dielectric properties suggest that the ceramics may contain both the polar and non-polar regions at temperatures near/above T_d.     

Magnetic properties of Nd1−xKxMnO3 compounds

Polycrystalline Nd_1−xK_xMnO₃ (x=0.10–0.20) compounds have been prepared in single phase form with Pbnm space group. The magnetic properties were studied by measuring dc magnetization and ac susceptibility. They exhibit paramagnetic to ferromagnetic transition with transition temperature ranging from 116 to 128 K. The magnetization data have been analyzed by using Brillouin function model and by taking into account the ferromagnetic interaction. The effective spin contribution towards ferromagnetic interaction and spin canting angle have been estimated. The spin canting angle is found to decrease with increase in doping. Magneto-caloric effect (MCE) has been studied and the maximum change in entropy was found to be 1.76 J/kg K for 1 T field. Metal–insulator transition and colossal magnetoresistance of the order of 60% for 1 T field have been observed for x=0.20 sample.     

Structural, magnetic and transport properties of double perovskite compounds (Sr2−3xLa2xBax)FeMoO6

The crystal structure and magnetic properties of a series of ordered double perovskite oxides (Sr_2−3xLa_2xBa_x)FeMoO₆ (0x0.3) have been investigated. X-ray powder diffraction reveals that the crystal structure of the compounds changes from a tetragonal I4/m lattice to a cubic lattice around x=0.2. Though the nominal average size of the A site cation of (Sr_2−3xLa_2xBa_x)FeMoO₆ is designed to be almost independent of x, the refinements of the crystal structure show that the lattice constants increase with x in both the tetragonal and the cubic phase regions due to electron doping. As the x increases, the degree of cationic ordering on the B site is decreased pronouncedly, while the Curie temperature of the compounds is nearly unchanged. The saturation magnetization of the compounds decreases with x and shows a linear dependence on the degree of cation ordering. The resistivity of the parent compound shows a semiconducting behavior below room temperature, but those of the doped samples exhibit a metal–semiconductor transition. A correlation between the resistivity and metal-semiconducting transition temperature (T_M−S) is observed. The resistivity and T_M−S of the compounds decrease with x for x0.2 and increase for x0.2. Magnetoresistance of the compounds is reduced by the La/Ba doping. All these observations can be understood based on the interplay of the electron doping, change in bandwidth and the anti-site defect concentration.     

Growth, structural and optical properties of CdxZn1−xS thin films deposited using spray pyrolysis technique

Cd_xZn_(1−x)S (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) thin films were deposited by the chemical spray pyrolysis technique using a less used combination of chemicals. Depositions were done at 573 K on cleaned glass substrates. The composition, surface morphology and structural properties of deposited films were studied using EDAX, SEM and X-ray diffraction technique. XRD studies reveal that all the films are crystalline with hexagonal (wurtzite) structure and inclusion of Cd into the structure of ZnS improved the crystallinity of the films. The value of lattice constant ‘a’ and ‘c’ have been observed to vary with composition from 0.382 to 0.415 nm and 0.625 to 0.675 nm, respectively. The band gap of the thin films varied from 3.32 to 2.41 eV as composition varied from x = 0.0–1.0. It was observed that presence of small amount of cadmium results in marked changes in the optical band gap of ZnS.     

Synthesis, characterization and melt processing of Y1−x(Yb0.9Nd0.1)xBa2Cu3Oz superconductors

Effects of a combined substitute of Yb and Nd on Y site on the superconducting properties of YBa₂Cu₃O_y have been studied. We synthesized Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z compound with x = 0.2, 0.4, 0.6, 0.8 and 1.0. Here, the ratio of Yb–Nd was fixed to be 9:1 for obtaining 123 phase without secondary phases. The melt processing thermal profiles for Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z with x = 0.2 and 0.4 and the addition of 40 mol% {Y_1−x(Yb_0.9Nd_0.1)_x}₂BaCuO₅ and 0.5 wt% Pt in air were determined on the basis of the thermal analysis results. All samples showed a low grain growth rate, particularly for high x values, which may be partially ascribed to un-optimized thermal schedules. Although almost all the samples exhibited low J_c values, the sample with x = 0.2 exhibited T_c of 88.8 K and a relatively high J_c value of 16,000 A/cm² at 77 K for H//c-axis.     

Structural and magnetic properties of Co1−xZnxFe2O4 nanoparticles by co-precipitation method

Co_1−xZn_xFe₂O₄ nanoparticles were prepared by co-precipitation method with x varying from 0 to 1.0. The powder samples were characterized by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and Fourier transform infrared spectroscopy (FTIR). The average crystallite sizes of the particles were determined from XRD. X-ray analysis showed that the samples were cubic spinel. The average crystallite size (D_aveXR) of the particles precipitated was found to vary from 6.92 to 12.02 nm decreasing with the increase in zinc substitution. The lattice constant (a_o) increased with the increase in zinc substitution. The specific saturation magnetization (M_S) of the particles was measured at room temperature. The magnetic parameters such as M_S, H_c, and M_r were found to decrease with the increase in zinc substitution. FTIR spectra of the Co_1−xZn_xFe₂O₄ with x varying from 0 to 1.0 in the range 400–4000 cm⁻¹ were reported. The spinel structure and the crystalline water adsorption of Co_1−xZn_xFe₂O₄ nanoparticles were studied by using FTIR.     

Transport properties and conduction mechanisms in CuFe2O4 and Cu1−xZnxGa0.3Fe1.7O4 compounds

Single-phase structure of CuFe₂O₄ and Cu_1−xZn_xGa_0.3Fe_1.7O₄; with (0.0≤x≤0.5) are synthesized. Electrical conductivity measurements as a function of temperature are carried out in the frequency range (10²-10⁵ Hz) for the prepared samples. The obtained results of these materials reveal a metallic-like behavior in the low range of frequency. At high frequency regime metallic-to-semiconductor transition has been observed as the compositional parameter x increases. Metallic-like behavior is accompanied with samples having low Zn content, where cation-cation [Cu-Cu] interaction is major at the octahedral B-sites and semiconductor behavior is associated with compounds having high Zn content, where cation-anion-cation [Fe-O-Fe] interaction is most predominant at B-sites in these spinel oxides. All studied compositions exhibit a transition with change in the slope of conductivity versus temperature curve. This transition temperature is found to decrease linearly with increasing Zn concentration x. The relation of the universal exponent s with temperature indicates the presence of two hopping conduction mechanisms; the correlated barrier hopping CBH at low Zn content x≤0.2 and small polaron (SP) at Zn content x≥0.3.     

The experimental and theoretical investigation of vibration spectra in ferroelectric semiconductor SbSBrxI1−x crystals

The vapor grown SbSBr_xI_1−x (x=0.1; 0.5; 0.9) crystals with clear mirror surfaces have been used for infrared reflection measurements with Fourier spectrometer. The vibration frequencies along c(z)-axis have been derived from Kramers–Kroning and optical parameters fitting analysis of the experimental reflectivity spectra at T=300 K. The theoretical vibration spectra of SbSBr_xS_1−x (x=0.1; 0.5; 0.9) crystals in paraelectric phase (T=300 K) along c(z)-axis have been determined in quasiharmonic approximation by diagonalization of dynamical matrix. The theoretical vibration spectra of these crystals in a–b(x−y) plane have been determined in harmonic approximation. In this work we discuss the nature of anharmonism in SbSBr_xI_1−x crystals along the c(z)-axis.     

Structural, thermal and conductive properties of Bi4−xMxV2O11 (M = La, Gd; 0 x 0.4) compounds

Bi_4−xM_xV₂O₁₁ (M = La, Gd) was prepared by solid state reactions. The amount of La and Gd in the (Bi_4−xM_xV₂O₁₁) was varied in the range of (0 x 0.4). The addition of La and Gd to Bi₄V₂O₁₁ electrolyte was found to stabilize the β crystalline phase for x 0.3. In addition, the phase transition corresponding β- to γ-phases are evident in the ionic conductivity plots as well as in XRD, DSC profiles of x 0.3 samples. The highest ionic conductivity was observed in Bi_3.9La_0.1V₂O₁₁ and Bi_3.8Gd_0.2V₂O₁₁ samples in the range of 10⁻³–10⁻⁴ S/cm for 700–500 °C. These results were supported by impedance spectroscopy, X-ray diffraction (XRD) and differential scanning calorimetry (DSC).     

Superprotonic solid solutions between CsHSO4 and CsH2PO4

Solid solutions of (CsHSO₄)_1 − x(CsH₂PO₄)_x (x = 0.25-0.75) were synthesized by mechanical milling method over a wide range of compositions. Superprotonic cubic phase was confirmed for all these samples between 293 and 420 K depending on its composition. These superprotonic phases have primitive cubic structure similar to that of CsH₂PO₄. The kinetic stability of the supercooled cubic phase depends both on the composition x and the humidity of surrounding atmosphere. The most stable composition of the cubic phase was found around x = 0.67 and could be maintained for several days even under ambient atmosphere. The ionic conductivities of these superprotonic phases reached 10^− 2–10^− 3 S∙cm^− 1 at 450 K. With increasing x the ionic conductivity at the superprotonic phase decreased continuously associated with the increase of the activation energy. These findings suggest that the average number of the hydrogen bonds between XO₄ (X = S, P) units plays an important role on the stability of the cubic phase and also on the conductivity.     

Lithium ion conductive glass–ceramics with Li3Fe2(PO4)3 and YAG laser-induced local crystallization in lithium iron phosphate glasses

The glasses with the composition of 37.5Li₂O–(25 − x)Fe₂O₃–xNb₂O₅–37.5P₂O₅ (mol%) (x = 5,10,15) are prepared, and it is found that the addition of Nb₂O₅ is effective for the glass formation in the lithium iron phosphate system. The glass–ceramics consisting of Nasicon-type Li₃Fe₂(PO₄)₃ crystals with an orthorhombic structure are developed through conventional crystallization in an electric furnace, showing electrical conductivities of 3 × 10^− 6 Scm^− 1 at room temperature and the activation energies of 0.48 eV (x = 5) and 0.51 eV (x = 10) for Li⁺ ion conduction in the temperature range of 30–200 °C. A continuous wave Nd:YAG laser (wavelength: 1064 nm) with powers of 0.14–0.30 W and a scanning speed of 10 μm/s is irradiated onto the surface of the glasses, and the formation of Li₃Fe₂(PO₄)₃ crystals is confirmed from XRD analyses and micro-Raman scattering spectra. The crystallization of the precursor glasses is considered as new route for the fabrication of Li₃Fe₂(PO₄)₃ crystals being candidates for use as electrolyte materials in lithium ion secondary batteries.     

Structural,electrical transport,and magnetic properties of Ni1−xZnxFe2O4

Structural, electrical, and magnetic properties of Ni_1−xZn_xFe₂O₄ (x=0.2, 0.4) samples sintered at various temperatures have been investigated thoroughly. The bulk density of the Ni_0.8Zn_0.2Fe₂O₄ samples increases as the sintering temperature (T_s) increases from 1200 to 1300 °C and above 1300 °C the bulk density decreases slightly. The Ni_0.6Zn_0.4Fe₂O₄ samples show similar behavior of changes to that of Ni_0.8Zn_0.2Fe₂O₄ samples, except that the bulk density is found to be the highest at 1350 °C. The DC electrical resistivity, ρ(T)$\rho (T)$, decreases as the temperature increases indicating that the samples have semiconductor-like behavior. As the Zn content increases, the Curie temperature (T_c), resistivity, and the activation energy decrease while the magnetization, initial permeability, and the relative quality factor (Q) increases. A Hopkinson peak is obtained near T_c in the real part of the initial permeability vs. temperature curves. The ferrite with higher permeability has a relatively lower resonance frequency. The initial permeability and magnetization of the samples has been found to correlate with density, average grain sizes. Possible explanation for the observed structural, magnetic, and changes of resistivity behavior with various Zn content are discussed.     

Magnetic properties of FexCo1−x/CoyFe1−yFe2O4 composite under hydrothermal condition

The metal–ferrite composites Fe_xCo_1−x/Co_yFe_1−yFe₂O₄ are synthesized by using disproportion of Fe (II) and reduction of Co (II) by Fe⁰ under hydrothermal condition. The size of the particles of the composites decreases as the [KOH] decreasing. The composites are measured by TEM and it can be deduced that when [KOH] = 0.1, the size of the alloy body-centered cubic (BCC) in composites is 20 ± 7 nm, the size of the Cobalt ferrite (spinel) is 170 ± 50 nm. The maximal value of the saturation magnetization (Ms) of the composite is about 100.14 emu/g, which is synthesized under Co (II)/Fe (II) = 0.05, [KOH] = 1 N, T = 150 °C and t = 3 h. The value of Hc of the composite synthesized under Co (II)/Fe (II) = 0.5, t = 3 h, T = 150 °C and [KOH] = 10.2 mol/L is about 2878.19 Oe. The Fe–Co alloy is synthesized through a reduction reaction of the composites in a flowing gaseous mixture. There is a maximal value (302.9 emu/g) of the Ms for the alloys generated at 1000 °C, which is the Co_0.412Fe_0.588 alloy.     

Nd crystal-field study of weakly doped Nd1−xCaxMnO3

Nd³⁺ crystal-field excitations in Nd_1−xCa_xMnO₃ (x=0.025, 0.05 and 0.1) single crystals are studied via infrared transmission as a function of temperature and external magnetic field. We report excitations associated with Nd³⁺ sites as detected in NdMnO₃ and excitations due to Ca doping. The latter reveal phase separation between the usual A-type antiferromagnetic states and the insulating canted (ferromagnetic) spin states in the vicinity of doped Ca²⁺ ions. Both Nd³⁺ crystal-field levels could be described using calculated parameters for NdMnO₃. Also, while oxygen stoichiometry and coherent Jahn–Teller distortions seem not to be affected by Ca doping, increased absorption bandwidths characterize the doped crystals.     

Temperature dependence of the indirect band gap, steepness parameter and related optical constants of [Kx(NH4)1−x]2ZnCl4 mixed crystals

Optical transmittance measurements near the absorption edge of [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals, where x=0.00, 0.232, 0.522, 0.644, 0.859 and 1.00, are reported over 276–350 K range. Analysis reveals that the type of transition is the indirect allowed one. The absorption edge shifted towards lower energy with increasing temperature. It is shown that [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals with x0.644 reveal a phase transition at 319 K, this phase disappeared at high concentrations of K⁺ ions. The steepness parameter is given, its value is used to estimate the temperature dependence of the indirect energy gap. In the region of the absorption edge, the absorption coefficient obeys Urbach's rule. Urbach parameters are investigated as a function of temperature.     

Remarkable influence on the dielectric and magnetic properties of lithium ferrite by Ti and Zn substitution

The effect of Zn and Ti substitution on the magnetic and electrical properties of Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄ ferrites (x=0.0 to 0.30 in steps of 0.05) +0.5wt% Bi₂O₃ prepared by a standard ceramic technique has been investigated. Electrical conductivity and dielectric measurements at different temperatures from 300 K to 700 K in the frequency range from 100 Hz to 2 MHz have been analysed. The variation of the real part of dielectric constant (ε^′) and loss tangent (tanδ) with frequency and temperature has been studied; it follows the Maxwell–Wagner model based on the interfacial polarization in consonance with the Koops phenomenological theory. It is found that the permittivity of zinc and titanium substituted lithium ferrite improves and shows a maximum value ( 1.5×10⁵) at 100 Hz for the x=0.25 sample. The dielectric transition temperature (T_d) depends on the concentration of Ti and Zn in Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄. The saturation magnetization and Curie temperature both decrease with increase in the concentration of Ti and Zn in the ferrite.     

High-frequency permeability and permittivity of NixZn(1−x)Fe2O4 thick film

Magnetic materials such as Ni_xZn_(1−x)Fe₂O₄ have resonant frequency in high frequency; therefore, they are more useful especially in microwaves. The Ni_xZn_(1−x)Fe₂O₄ was prepared by the chemical coprecipitation method using citrate precursors, and the fritless thick film was screen printed on alumina substrates. The composition-dependent permeability and permittivity in the high frequency 8–12 GHz are investigated. Using the overlay technique on Ag-thick-film patch antenna, the change in reflectance and transmittance has been measured. The Ni_xZn_(1−x)Fe₂O₄ thick film, when used as overlay on Ag-thick-film patch antenna, changes the resonance characteristics. The changes in resonance frequency, reflectance and transmittance have been used to calculate the permeability and permittivity of the thick film. Zinc-concentration-dependent changes are obtained.     

Magnetoresistive properties of Zn1−xCoxFe2O4 ferrites

The magnetic and magnetoresistive properties of spinel-type Zn_1−xCo_xFe₂O₄ (x=0, 0.2 and 0.4) ferrites are extensively investigated in this study. A large negative magnetoresistance (MR) effect is observed in Zn_1−xCo_xFe₂O₄ ferrites of spinel structure. These materials are either ferrimagnetic or paramagnetic at room temperature, and show a spin-(cluster) glass transition at low temperatures, depending on the chemical compositions. The MR curves as a function of magnetic fields, MR(H), are parabolic at all temperatures for paramagnetic polycrystalline ZnFe₂O₄. The MR for ZnFe₂O₄ at 110 K in the presence of 9 T applied magnetic field is 30%. On the other hand, MR(H) are linear for x=0.2 and 0.4 ferrimagnetic Zn_1−xCo_xFe₂O₄ samples up to 9 T. The MR effect is independent of the sintering temperatures, and can be explained with the help of the spin-dependent scattering and the Yafet–Kittel angle of Zn_1−xCo_xFe₂O₄ mixed ferrites.     

Synthesis and Eu concentration-dependent photoluminescence of Gd2−xEuxO3 nanowires

The nanowire growth behavior and photoluminescence characteristics of red-emitting oxide phosphor Gd_2−xEu_xO₃ have been investigated in the function of activator (Eu³⁺) concentrations (x=0.08, 0.12, 0.16, 0.20, and 0.24). Nanowires of Gd_2−xEu_xO₃ phosphor were prepared by the dehydration of corresponding hydroxides Gd_1−x/2Eu_x/2(OH)₃ obtained by the hydrothermal reaction. Highly uniform nanowires of 20-30 nm in diameter can grow up to several tens of micrometers in length. A number of defects on the surface of Gd_1.92Eu_0.08O₃ nanowires, which are induced during structural transformation from hexagonal hydroxide to cubic oxide, strongly decrease the luminescence efficiency in comparison with that of the bulk phosphor. In contrast, the photoemission intensity of nanowires is significantly improved with increasing Eu³⁺ content (x) of Gd_2−xEu_xO₃ solid solution. The highest relative emission intensity of nanowires is observed when the x value is close to x=0.20. This content is much higher than the optimal concentration of Eu³⁺ (x=0.08-0.10) for the bulk Gd₂O₃:Eu powder.