聚(3-烷基噻吩)的合成与应用研究进展

详述了聚(3-烷基噻吩)的化学合成方法、电化学合成方法及近期新兴的微波辐射辅助合成法;并总结了聚(3-烷基噻吩)在光伏电池材料、电致发光材料和热电材料等领域的应用研究及现状.     

Effects of Heat Treatment on the Crystallization Behavior of Poly(3-alkylthiophenes)

IntroductionPoly( 3- alkylthiophenes) ( P3ATs) ,as a newkind of soluble,fusible and processable conductivepolymers,have attracted a great interest and muchattention ofchemistsand physicists[1,2 ] . Ithas beenwidely accepted that P3ATs can form similarlayered structures with alkyl side chains beingoriented in the lateral a- axis direction[3— 6] .Moreover,when the number of the carbon atoms inthe alkyl side chains is more than1 0 ,some orderlyarrangements of the side chains will occur between…     

Poly (methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary for in-tube solid phase microextraction coupled to high performance liquid chromatography and its application to determination of basic drugs in human serum

A poly (methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column was prepared for in-tube solid-phase microextraction. Comparing with the commonly used open tubular extraction capillary, which cannot provide sufficient extraction efficiency since the ratio of its coating volume to that of the capillary void volume is relatively small, the monolithic column with greater phase ratio combined with convective mass transfer provides the possibility to improve the extraction efficiency with shorter capillary. As to poly (methacrylic acid-ethylene glycol dimethacrylate), its hydrophobic main chains and acidic pendant groups make it a superior material for extraction of basic analytes from aqueous matrix.An on-line monolithic capillary column solid phase microextraction (SPME) method was developed for determination of theobromine, theophylline and caffeine in serum samples. The high extraction efficiency was obtained for all the three analytes, yielding the detection limits of 12, 8 and 6.5 ng/mL by UV detection, respectively. Excellent method reproducibility (R.S.D. < 2.9%) was found over a linear dynamic range of 0.05-2 μg/mL in serum sample. The monolithic capillary column was proved to be reusable in coping with serum samples, which would facilitate practical determination of basic drugs.     

A new interface for coupling solid phase microextraction with liquid chromatography

A modified Rheodyne 7520 microsample injector was used as a new solid phase microextraction (SPME)–liquid chromatography (LC) interface. The modification was focused on the construction of a new sample rotor, which was built by gluing two sample rotors together. The new sample rotor was further reinforced with 3 pieces of stainless steel tubing. The enlarged central flow passage in the new sample rotor was used as a desorption chamber. SPME fiber desorption occurred in static mode. But all desorption solvent in the desorption chamber was injected into LC system with the interface. The analytical performance of the interface was evaluated by SPME–LC analysis of PAHs in water. At least 90% polycyclic aromatic hydrocarbons (PAHs) were desorbed from a polyacrylonitrile (PAN)/C18 bonded fuse silica fiber in 30 s. And injection was completed in 20 s. About 10–20% total carryovers were found on the fiber and in the interface. The carryover in the interface was eliminated by flushing the desorption chamber with acetonitrile at 1 mL min⁻¹ for 2 min. The repeatability of the method was from 2% to 8%. The limit of detection (LOD) was in the mid pg mL⁻¹ range. The linear ranges were from 0.1 to 100 ng mL⁻¹. The new SPME–LC interface was reliable for coupling SPME with LC for both qualitative and quantitative analysis.     

Poly(vinyl ethers) as building blocks for new materials

The living cationic polymerization of vinyl ethers has been used to prepare a number of new polymers with special properties. Sequential polymerization of the hydrophilic methyl vinyl ether (MVE) and the hydrophobic octadecyl vinyl ether (ODVE) has lead to amphiphilic block-copolymers with emulsifying properties for water/decane mixtures. Poly(vinyl-ether) macromonomers were obtained by end-capping of living polymers with hydroxyethyl acrylate. Copolymerization of polyODVE-macromonomer with usual acrylates lead to highly branched hydrophobic polymers. When the end-capping was performed with bifunctionally living polymers, the corresponding “bis-macromonomers” were obtained. Copolymerization of such bis-macromonomers with styrene or butyl acrylate, leads to the formation of segmented polymer networks. In the case of polyODVE-poly(butyl acrylate), these networks showed a pronounced phase separation. Due to the crystallinity of the polyODVE domains, these materials showed shape memory properties.     

Alumina-based fiber for solid phase microextraction of alcohols from gaseous samples.

On the basis of the affinity of alumina towards hydroxyl functional groups, a solid phase microextraction (SPME) fiber was constructed using alumina powder and poly(vinyl chloride) (PVC). Different compositions were tested and alumina:PVC (97:3) was selected as an optimun composition. A piece of silver wire was used as fiber support. The fiber producing was simple and could be completed in a few minutes. The mechanical durability of the fiber was so good that only a single fiber was used during this study. Ethanol, 1-butanol, 2-butanol, 1-pentanol, 2-pentanol and cyclohexanol were selected as target analytes. Finally, ethanol concentration in the fruit juices and vinegar was measured using SPME-capillary gas chromatography followed by flame ionization detection.     

Multiple solid-phase microextraction of drugs from human urine

Summary The applicability of multiple solid-phase microextraction to the analysis of biological samples has been shown by extraction of a variety of compounds from human urine. Multiple solid-phase microextraction, in which extraction and desorption are repeated and analytes are collected at the head of the separation system before starting the analysis, has been combined with gas chromatography. Amphetamine, lidocaine, procaine, and mepivacaine were extracted from buffered urine by direct immersion of a 100-μm polydimethylsiloxane-coated fiber, to demonstrate that multiple SPME can be used for analytes with different extraction behavior. Multiple solid-phase microextraction was optimized for high extraction yield or short extraction time. For example, the total sample-handling time (extraction plus desorption) for the extraction of mepivacaine from urine can be reduced from approximately 60 min (one extraction) to 33 min (three extractions) without reducing extraction yield. In addition, the extraction yield for mepivacaine can be increased from 14.6% (one extraction) to 27.0% (five extractions) within the same total sample handling time of approximately 60 min. A good match between theoretical and experimental values was obtained. Chromatograms are shown to illustrate the usefulness of the procedure.     

Analysis of monoterpenes from conifer needles using solid phase microextraction

The applicability of solid phase microextraction (SPME) to the headspace analysis of monoterpene hydrocarbons from conifer needles was examined. To this end, the influences of fiber coating thickness, exposure time, and exposure temperature on the enrichment of the different monoterpene hydrocarbons were investigated. The distribution constants between polydimethylsiloxane fiber and gas phase at a given temperature were found to be very different. A relation is therefore derived to calculate the distribution constants of substances not available from their Kováts retention indices. A slightly different approach could be the use of so-called “relative distribution factors”, not considering the actual volume of fiber coating. In view of the different enrichment conditions in SPME as well as the general problems of headspace analysis, a comparison with a completely different method of sample preparation is presented. Furthermore, some applications of SPME to the analysis of monoterpenes from pine needles are given.     

Poly(cyclotriphosphazene-co-phloroglucinol)PCPP as a solid phase extractant for preconcentrative separation of uranium(VI) from aqueous solution

Poly(cyclotriphosphazene-co-phloroglucinol) (PCPP) microspheres, a new solid phase extraction for extracting uranium(VI), synthesized via one-pot precipitation copolymerization. The PCPP microspheres were characterized by FT-IR, SEM/EDS, zeta potential and N₂ adsorption/desorption isotherms. Through the extraction experiment to evaluate the extraction behavior of the PCPP microspheres for uranium(VI). The extractant can achieve the optimal effect under the conditions of contact time with 60 min, pH = 3.5, initial concentration 100 mg L⁻¹ and extractant dosage 0.70 g L⁻¹. The extraction behavior obeyed with the pseudo second-order model and Langmuir isotherm model.

     

Matrix effect for several derivatives of benzene in water by solid phase microextraction (SPME)

Summary Levels of several derivatives of benzene were examined in natural surface water (river Zala, West-Hungary) by solid phase micro extraction. Results from the river water samples were compared to the results from spiked double distilled water. The difference in extraction efficiency is termed a “matrix effect”. Large matrix effect causing the change of extraction efficiency experienced in this study. Relationship was found between the matrix effect and TOC, TIC, suspended and the dissolved matter content. Presented at Balaton Symposium on High Performance Methods, Siófok, Hungary, September, 1–3, 1999     

Poly(silamine)s as new electron-beam resist materials

Several types of poly(silamine)s were prepared and their structure-characteristics relationships were investigated. When a phenyl ring in the organosilyl unit and/or a cyclic structure in the amino unit was introduced, the glass transition temperatures were increased significantly in order to increase film formability. From the thermogravimetric analysis of the poly(silamine)s, it was found that the thermal decomposition of poly(silamine)s starts at ca. 380–400°C. On electron-beam irradiation of the poly(silamine) films, degradation of the polymer took place. On the basis of these results, poly(silamine)s can be one of the candidates for new positive-type polymeric resists.     

An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water

An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of this polymer as a suitable SPME fiber coating for trapping the selected phenols. Influential parameters affecting the extraction process were optimized and an extraction time of 50 min at 50 °C gave maximum efficiency, when the aqueous sample was saturated with NaCl and adjusted at pH 2. This new coating can be prepared easily in a reproducible manner and it is rather inexpensive and stable against most of organic solvents. The PANI thickness can be precisely controlled by the number of CV cycles. At the optimum conditions, the R.S.D. for a double distilled water spiked with phenol and chlorophenols at ppb level were 4.8-17% (n = 3) and detection limits for the studied compounds were between 0.69 and 3.7 ng ml⁻¹, except for phenol and 4-chlorophenol. The optimized method was successfully applied to some real-life water samples.     

Fabric phase sorptive extraction: A new sorptive microextraction technique for the determination of non-steroidal anti-inflammatory drugs from environmental water samples

Fabric phase sorptive extraction (FPSE) is a new, yet very promising member of the sorbent-based sorptive microextraction family. It has simultaneously improved both the extraction sensitivity and the speed of the extraction by incorporating high volume of sol–gel hybrid inorganic–organic sorbents into permeable fabric substrates. The advantages of FPSE have been investigated for the determination of four non-steroidal anti-inflammatory drugs, ibuprofen, naproxen, ketoprofen and diclofenac, in environmental water samples in combination with gas chromatography–mass spectrometry. Initially, the significance of several parameters affecting FPSE: sorbent chemistry, matrix pH and ionic strength were investigated using a mixed level factorial design (3¹ × 2²). Then, other important parameters e.g., sample volume, extraction kinetics, desorption time and volume were also carefully studied and optimized. Due to the high sorbent loading on the FPSE substrate in the form of ultra-thin coating and the open geometry of the microextraction device, higher mass transfer of the target analytes occurs at a faster rate, leading to high enrichment factors in a relatively short period of time (equilibrium times: 45–100 min). Under optimal operational conditions, the limits of detection (S/N = 3) were found to be in the range of 0.8 ng L⁻¹ to 5 ng L⁻¹. The enrichment factors ranged from 162 to 418 with absolute extraction efficiencies varied from 27 to 70%, and a good trueness (82–116% relative recoveries) indicating that the proposed method can be readily deployed to routine environmental pollution monitoring. The proposed method was successfully applied to the analysis of target analytes in two influent and effluent samples from a wastewater treatment plant and two river water samples in Spain.     

A novel approach to the rapid determination of amoxicillin in human plasma by solid phase microextraction and liquid chromatography

A new approach to the rapid determination of amoxicillin (AMO) in human plasma followed by solid phase microextraction (SPME) fiber coatings based on conducting polymers (polypyrrole and polythiophene) and high performance liquid chromatography (HPLC) has been described. The porous structures of the electrochemically deposited polymer coatings have been characterized by scanning electron microscopy (SEM). The experimental parameters relating to the extraction efficiency of the SPME fibers such as pH, extraction time and desorption conditions (solvents, time) were studied and selected. The SPME/HPLC-UV method was linear over a working range of 1-50 μg ml(-1). The inter-day accuracy (expressed as coefficients of variations, CVs) was less than 15% and precision (expressed as the relative standard deviations, RSDs) with percentage values was less than 5.9%. Amoxicillin was found to be stable in the human plasma at room temperature (20 °C) within 8 hours. The developed method was successfully applied to the analysis of real human plasma samples. The limit of detection and limit of quantification for amoxicillin in plasma were 1.21 μg ml(-1) and 3.48 μg ml(-1), respectively.     

Headspace solid phase microextraction (HSSPME) for the determination of volatile and semivolatile pollutants in soils

We have investigated the use of headspace solid phase microextraction (HSSPME) as a sample concentration and preparation technique for the analysis of volatile and semivolatile pollutants in soil samples. Soil samples were suspended in solvent and the SPME fibre suspended in the headspace above the slurry. Finally, the fibre was desorbed in the Gas Chromatograph (GC) injection port and the analysis of the samples was carried out. Since the transfer of contaminants from the soil to the SPME fibre involves four separate phases (soil-solvent-headspace and fibre coating), parameters affecting the distribution of the analytes were investigated. Using a well-aged artificially spiked garden soil, different solvents (both organic and aqueous) were used to enhance the release of the contaminants from the solid matrix to the headspace. It was found that simple addition of water is adequate for the purpose of analysing the target volatile organic chemicals (VOCs) in soil. The addition of 1 ml of water to 1 g of soil yielded maximum response. Without water addition, the target VOCs were almost not released from the matrix and a poor response was observed. The effect of headspace volume on response as well as the addition of salt were also investigated. Comparison studies between conventional static headspace (HS) at high temperature (95 degrees C) and the new technology HSSPME at room temperature ( approximately 20 degrees C) were performed. The results obtained with both techniques were in good agreement. HSSPME precision and linearity were found to be better than automated headspace method and HSSPME also produced a significant enhancement in response. The detection and quantification limits for the target VOCs in soils were in the sub-ng g(-1) level. Finally, we tried to extend the applicability of the method to the analysis of semivolatiles. For these studies, two natural soils contaminated with diesel fuel and wood preservative, as well as a standard urban dust contaminated with polyaromatic hydrocarbons (PAHs) were tested. Discrimination in the response for the heaviest compounds studied was clearly observed, due to the poor partition in the headspace and to the slow kinetics of all the processes involved in HSSPME.     

Poly(ionic liquid)s as new materials for CO2 absorption

A series of imidazolium‐based ionic liquid monomers and their corresponding polymers (poly(ionic liquid)s) were synthesized, and their CO₂ sorption was studied. The poly(ionic liquid)s had enhanced CO₂ sorption capacities and fast sorption/desorption rates compared with room temperature ionic liquids. The effects of the chemical structures, including the types of anion, cation, and backbone of the poly(ionic liquid)s on their CO₂ sorption have been discussed. In contrast to room temperature ionic liquids, the polymer with PF anions had the highest CO₂‐sorption capacity, while those with BF or Tf₂N^? anions had the same capacities. The CO₂ sorption and desorption of the polymers were fast and reversible, and the sorption was selective over H₂, N_2, and O₂. The measured Henry's constants of P[VBBI][BF₄] and P[MABI][BF₄] were 26.0 bar and 37.7 bar, which were lower than those of similar room temperature ionic liquids. The preliminary study of the mechanism indicated that the CO₂ sorption of the polymer particles was more absorption (the bulk) but less adsorption (the surface). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5477–5489, 2005     

Assessment of a dynamic hollow-fibre liquid phase microextraction system for human blood plasma samples

A dynamic liquid phase microextraction (LPME) system, based on hollow-fibre supported liquid membrane (SLM) extraction, was developed for extracting ionisable xenobiotics from human plasma, and its performance was evaluated (in terms of extraction efficiency, reproducibility, durability and carry-over) using nitrophenolic compounds as model analytes at concentrations of 0.1–0.5 μg mL^?1 in aqueous standards. The efficiency and repeatability were tested also on spiked human plasma. The system is non-expensive, convenient, requires minimal manual handling and enables samples with volumes as small as 0.2 mL to be extracted. For plasma samples extraction efficiencies of between 30 and 58% were achieved within 20 min, including washing steps. The limit of detection (LOD) values were in the range 0.02–0.03 μg mL^?1. The developed system can provide enrichment factors up to eight, based on the injection-to-acceptor volume ratio (in this case 0.2–0.025 mL). The same hollow-fibre membrane was used up to 8 days with no loss of efficiency. Carry-over was lower than detection limit.     

Poly(3-octylthiophene) as solid contact for ion-selective electrodes: contradictions and possibilities

The hydrophobic conductive polymer, poly(3-octylthiophene) (POT), is considered as uniquely suited to be used as an ion-to-electron transducer in solid contact (SC) ion-selective electrodes (ISEs). However, the reports on the performance characteristics of POT-based SC ISEs are quite conflicting. In this study, the potential sources of the contradicting results on the ambiguous drift and poor potential reproducibility of POT-based ISEs are compiled, and different approaches to minimize the drift and the differences in the standard potentials of POT-based SC ISEs are shown. To set the potential of the POT film, it has been loaded with a 7,7,8,8-tetracyanoquinodimethane (TCNQ/TCNQ^·?) redox couple. An approximately 1:1 TCNQ/TCNQ^·?ratio in the POT film has been achieved through potentiostatic control of the potential of the redox couple-loaded conductive polymer. It is hypothesized that once the POT film has a stable, highly reproducible redox potential, it will provide similarly stable and reproducible interfacial potentials between the POT film and the electron-conducting substrate and result in SC ISEs with excellent reproducibility and potential stability. Towards this goal, the potentials of Au, GC, and Pt electrodes with drop-cast POT film coatings were recorded in KCl solutions as a function of time. Some of the POT films were loaded with TCNQ and coated with a K⁺-selective membrane. The improvement in the potential stabilities and sensor-to-sensor reproducibility as a consequence of the incorporation of TCNQ in the POT film and the potentiostatic control of the TCNQ/TCNQ^·?ratio is reported.     

Mechanism of dedoping processes of conducting poly(3-alkylthiophenes)

To clarify the mechanism of thermal dedoping processes of conducting poly(3-alkylthiophenes), temporal changes in electric conductivity, photoabsorption, and electron spin resonance of iodine-doped poly(3-octylthiophene) were examined. A decrease in the electric conductivity was accompanied by a decrease in the photoabsorption of the polymer cation and an increase in the spin concentration: the cation is a spinless charge carrier and it was converted to an immobile paramagnetic species. The conversion proceeds through deprotonation of the cation, which results in the formation of a polyenyl radical.     

In vivo solid phase microextraction sampling of human saliva for non-invasive and on-site monitoring

On-site sample preparation is an analytical approach based on direct sampling from the system under investigation. It has the advantage of combining sampling and sample preparation into a single step, thus generally is fast, minimizes the potential sources of error and eliminates the risks for analytes instability. For such analysis solid phase microextraction in thin film geometry (TF-SPME) can provide robust and convenient in vivo sampling, offering in the same time faster analysis and higher extraction recovery (i.e., better sensitivity) due to large surface to volume ratio.