Solvatochromism as an alternative for contact angle measurements in the characterisation of modified polymer surfaces

Polyolefine surfaces have been pre-treated by UV/ozone and UV/water methods. The increase in polar groups on a polymer surface and the contribution of these polar groups to the adhesion of the polymer has been investigated by using contact angles and tensile strength tests. Because contact angle measurements do not give information about the specific polar groups on the surface we have used solvatochromic analyses to identify specific polar groups. The results showed that solvatochromic analyses is a promising method to discriminate between different kinds of polar groups and therefore solvatochromic surface characterisation may become an important surface analytical tool in adhesive technology.     

Polymer-surfactant Interactions

Aqueous solutions containing poly(vinyl-pyrrolidone) and sodium caprylate, or poly(vinyl-pyrrolidone) and tetraethylammonium perfluorooctanesulfonate,respectively, have been investigated by volumetric, ionic conductivity and surface tension methods. The presence of an interaction region has been determined from conductivity and surface tension. The width of such a region depends on the amount of polymer in the mixture,temperature, surfactant content and added electrolyte (NaCl). The observed behaviour was explained in terms of the combined effects played by the alkyl-chain hydophobicity, polar head group(s) and counter-ions. An approximate solution to a mass action model for the binding of surfactants onto polymers has been introduced. It allows determining the width of the interaction region as a function of polymer mass percent in the mixture. This revised version was published online in July 2006 with corrections to the Cover Date.     

原子转移自由基聚合法制备新型亲水开管毛细管柱及在毛细管电色谱上的应用

为了增加开管毛细管柱(OTCC)的相比,提高分离效率,发展了表面引发原子转移自由基聚合法(SI-ATRP)制备葡萄糖聚合物修饰的开管毛细管柱。通过扫描电镜观察,该开管柱内壁上修饰了三维波浪状聚合物,明显增加了内壁比表面积和相比。在pH 3~11范围内,对含糖聚合物修饰的开管柱和空柱的电渗流进行了比较。修饰后开管柱的电渗流仅为空柱的1/2~1/3,且在pH 6~11范围内保持平稳。稳定的电渗流保证了分离的重复性和稳定性。用该开管毛细管柱成功实现了小分子混合物(苯丙氨酸、胸腺嘧啶、腺苷、鸟苷、5-溴尿嘧啶、水杨酸)以及蛋白质大分子(核糖核酸酶B、转铁蛋白和牛血清白蛋白)的有效分离,结果表明葡萄糖聚合物修饰的开管毛细管柱具有良好的重复性和稳定性。     

Model filled rubber. II. Particle composition dependence of suspension rheology

Monodisperse size colloidal particles varying in chemical composition were synthesized by emulsifier‐free emulsion polymerization. Using a stress‐controlled rheometer, the rheological behavior of colloidal suspensions in a low molecular weight liquid polysulfide was investigated. All suspensions exhibited shear thinning behavior. The shear viscosity, dynamic moduli, and yield stress increased as interactions between particles and matrix increased. The rheological properties associated with network buildup in the suspensions were sensitively monitored by a kinetic recovery experiment. We propose that interfacial interactions by polar and hydrogen bonding between particles and matrix strongly promote affinity of matrix polymer to the filler particles, resulting in adsorption or entanglement of polymer chains on the filler surface. A network structure was formed consisting of particles with an immobilized polymer layer on the particle surface with each particle floc acting as a temporary physical crosslinking site. As the interfacial interaction increases, the adsorbed layer thickness on the filler particles, hence, the effective particle volume fraction, increases. As a result, the rheological properties were enhanced in the order PS < PMMA < PSVP. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 815–824, 1999     

Surface free energy of ladderlike polyepoxysiloxane–diamine reaction systems

We studied three kinds of ladderlike polyepoxysiloxanes, which have different side groups grafted on the ladderlike backbones. 1,3‐Bis(aminopropyl)tetramethyl disiloxane (diamine) was used as the curing agent. The reaction between ladderlike polyepoxysiloxanes and diamine was investigated by contact angle measurements and surface free energy study. Several factors such as diamine amount, reaction time, and temperature can affect the systems' surface tension (or surface free energy), which were determined by two‐liquid geometric and three‐liquid acid‐base methods. The experimental results showed that an increase in the diamine amount in the reaction systems results in an increase in the polar part of surface free energy because of electron donate characteristics of the diamine. However, because epoxy (electron acceptor) and diamine (electron donor) react fast at elevated temperatures, increasing reaction temperature decreases the polar part of the surface free energy, while increases the nonpolar part of the surface free energy. The evolution of surface free energy with time for various epoxy–diamine reaction systems at various temperatures has also been studied. It was found that it took a relatively long time (50–60 h) to reach the equilibrium state. The experimental results can be well interpreted by the epoxy–diamine reaction mechanism and van Oss–Good's Lewis acid‐base theory. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1449–1460, 2000     

溶液法改性高分子表面技术的研究 (Ⅰ)──改性高分子表面的结构和性质

医用高分子材料的生物相容性问题逐步引起人们的重视［１］．除合成相容性好的材料外,另一个途径是对现有高分子材料进行改性以提高其生物相容性,其中表面改性因其对材料本体的影响小,成为医用高分子材料研究的一个热点．Ｒｕｃｋｅｎｓｔｅｉｎ［２］最早利用溶液法改...     

Plasma copolymerization: Hexafluoropropylene and a nonpolymerizable gas

Plasma polymerized (PP) fluoropolymer films have been synthesized by the plasma copolymerization of hexafluoropropylene (HFP) and a nonpolymerizable gas. Plasma etching was inhibited by fluorine scavenging and HF formation on the addition of hydrogen and was accelerated on the addition of oxygen. Nitrogen, oxygen, and hydrogen were incorporated into the deposited polymer molecules when added to the HFP plasma. The polar component of surface tension increased on nitrogen addition and the dispersive component on hydrogen addition. The higher surface tension drove the deposition and coalescence of smaller particles from the gas phase polymerization yielding smooth surfaces. The significant drop in breakdown voltage on the addition of nitrogen was attributed to a different conduction mechanism in the relatively polar PP fluoropolymer film. © 1996 John Wiley & Sons, Inc.     

Physical association of polymers with nanotubes

We use a coarse-grained Monte Carlo model to further investigate the association of polymers with carbon nanotubes (CNTs). Previous studies have shown ordered helical wrapping conformations for a range of investigated parameters. Such adsorbed conformations allow the polymers to spiral up and down the surface of the nanotube, retaining their helical state. We analyze the helical pitch of such conformations, and relate it to nanotube radius and chain stiffness using a simple model. The model reveals that the helical pitch is approximately determined by the matching between the radius of curvature of the helix with the average bending angle of the polymer, determined by its persistence length. In addition, we simulate adsorption of block and triblock copolymers (BCPs) whose different blocks are differentiated by their degree of association with the nanotube (hydrophobic or polar). The hydrophobic blocks of the copolymers initially adsorb in both helical and random conformations of the hydrophobic block, depending on which part of the chain (center or ends) adsorbs first on the CNTs surface. In both configurations, however, the polar block extends away from the nanotube, forming loops and tails for triblock and diBCPs, respectively. Such configurations may improve the interfacial adhesion in polymer–CNTs composites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2711–2718, 2008     

Supramolecular structures of poly(γ-benzyl-L-glutamate) self-assembled on mica surface

This article reports the results of structural studies of poly (γ-benzyl-L -glutamate) (PBLG) layers self-assembled from dilute solutions in organic solvents on mica surface. Polarized dynamic light scattering and atomic force microscopy were used to study polymer properties in solutions and on the surface. The hierarchy of self-assembly from PBLG solutions in different solvents was investigated as a function of polymer concentration and solvent polarity. We show that the surface–polymer interaction is suppressed in polar solvents that is interpreted in terms of suppressed charge–dipole interaction. The transformation of the PBLG surface structure occurs upon addition of different amounts of trifluoroacetic acid to polymer solution in dioxane. Rigid-rod PBLG molecules experience rod–globular transition while assembling on nonmodified mica from the very dilute solutions. A scheme is proposed describing different stages of PBLG fibrogenesis on a charged surface. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1567–1577, 1998     

Interaction between a +1 defect in a nematic thin film and the surface wall and flexoelectric response at the defect site

Within the Landau-de Gennes theory, we have investigated the interaction between a +1 defect whose nuclei is ‘circular’ nuclei (i.e. the director flux lines around the defect nuclei are circular) and the surface wall, using the one-dimensional finite-difference iterative method. +1 point defects will evolve into line defects perpendicular to the sample plane due to the existence of the surface wall. Therefore, we consider cylindrically symmetric solutions containing the line defect. The free energy of liquid crystal molecules around the defect nuclei and the surface energy produced by the surface wall are competing with each other. This competition makes polar angle of the director around the defect nuclei change considerably in a certain region, and the scale of this region will decrease with the surface anchoring strength increasing. On application of a DC electric field normal to the sample plane, the defect exhibits a flexoelectric response. We demonstrate that the field-driven structural changes at the defect site involve changes in both azimuthal and polar angles defining the local director.     

Modification,degradation, and stability of polymeric surfaces treated with reactive plasmas

The degradation, modification, and stability of polymeric surfaces exposed to chemically reactive O₂ and H₂O‐vapor plasmas were investigated. Specifically, the effects of these plasmas on etching rate, surface morphology, wetting instability, and fluid‐holding capability were studied. Wetting instability is reflected by hydrophobic recovery and can be examined by the Wilhelmy balance method. Although hydrophobic recovery is usually attributed to surface configuration change, there are actually two types: reversible and permanent. Reversible hydrophobic recovery is caused by surface configuration change, whereas permanent hydrophobic recovery is caused by the creation of oxidized surface oligomers. This study distinguishes the two by identifying differences in the shapes of the corresponding Wilhelmy force loops and in the fluid‐holding parameter. The presence of surface oligomers was most detrimental to wetting stability and fluid‐holding capability but could be controlled via the type of reactive gas, the discharge conditions, and the polymer substrate. In general, polymers most susceptible to O₂‐plasma etching had the least surface oligomers and vice versa, whereas H₂O‐vapor plasma suppressed surface oligomers on polymers less susceptible to etching. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3028–3042, 2000     

Liquid crystal alignment capabilities on rubbed organic solvent soluble polyimide surfaces with trifluoromethyl moieties

High pretilt angles, polar anchoring energy (out of plane-tilt), and surface ordering in the nematic liquid crystal 4-n-pentyl-4'-cyanobiphenyl (5CB) were investigated on rubbed organic solvent soluble polyimide (PI) surfaces with a helical backbone structure and trifluoromethyl moieties. It was found that the pretilt angle of 5CB is about 15° in the wide rubbing region of rubbed soluble PI surfaces with trifluoromethyl moieties attached to the lateral benzene rings. It is suggested that the microscopic surface structure of the polymer contributes to the LC pretilt angle generation at the surface. Also, the polar anchoring energy of 5CB is dependent on the molecular structure of these unidirectionally rubbed soluble PI surfaces. The polar anchoring strength of 5CB on rubbed soluble PI surfaces is as weak with trifluoromethyl moieties attached to the lateral benzene rings weak as when the trifluoromethyl moieties are attached to the polymer backbone. Finally, the polar anchoring energy of 5CB strongly depends on the surface ordering of rubbed soluble PI surfaces.     

Surface restructuring of polymers

Time-dependent contact angle measurements are employed to follow the dynamics of surface modifications of various polymeric surfaces of different hydrophilicities. The equilibration of a hydrophilic polymer in a strong polar environment (such as water) induces an increase in the polarity of the surface; the subsequent exposure of the restructured solid to a nonpolar environment decreases the polarity of the surface. The dynamics of these processes depends on the history of the specimen. Various phenomena, such as surface restructuring by the reorientation of the buried polar or nonpolar moieties, water penetration into the polymer, and the reorganization of water in the neighborhood of the surface, are suggested to be responsible for the time evolution of the dynamic contact angles.     

Effect of surface‐grafted ionic groups on the performance of cellulose‐fiber‐reinforced thermoplastic composites

The influence of the surface chemistry of the cellulose fiber and polymer matrix on the mechanical and thermal dynamic mechanical properties of cellulose‐fiber‐reinforced polymer composites was investigated. The cellulose fiber was treated either with a coupling agent or with a coupling‐agent treatment followed by the introduction of quaternary ammonium groups onto the fiber surface, whereas the polymer matrix, with opposite polar groups such as polystyrene incorporated with sulfonated polystyrene and poly(ethylene‐co‐methacrylic acid), was compounded with the fiber. The grafting of the fiber surface was investigated with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Experimental results showed that an obvious improvement in the mechanical strength could be achieved for composites with an ionic interface between the fiber and the polymer matrix because of the adhesion enhancement of the fiber and the matrix. The improved adhesion could be ascribed to the grafted ionic groups at the cellulose‐fiber surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2022–2032, 2003     

Behavior of Plasma-Treated Elastomeric Polydimethylsiloxane Coatings in Aqueous Environment

Plasma treatment is a useful way of enhancing the wettability of polydimethylsiloxane (PDMS). The subsequent recovery of hydrophobicity in air once treatment is discontinued is well known, but less has been reported about the effect of the storage environment. Water storage is the most relevant, with some reports that this stops the hydrophobic recovery of plasma-treated Medical Grade PDMS elastomer. This is not our experience with a commercial industrial PDMS sealant that had been treated by a helium radio-frequency plasma and stored in pure water and in artificial sea water. Substantial hydrophobic recovery occurs on storage in these environments. The commercial sealant is likely to have more low molecular weight diffusible species and more pre-existing silanol groups than the Medical Grade material. Both of these factors could affect the recovery mechanism by diffusion of untreated polymer chains to the surface or reorientation of polar and non-polar groups in the surface region.     

Polysiloxanes Modified by Thiol‐Ene Reaction and Their Interaction with Gold Nanoparticles

A poly(vinylmethyl‐co‐dimethyl)siloxane has been functionalized with phenylethanethiol, N‐methylmercaptoacetamide and heptadecafluoro‐1‐decanethiol by a thermal radical thiol‐ene reaction initiated by azobisisobutyronitrile. The resulting polymers were obtained in good yields with most of the time a complete conversion of the vinyl groups. The reaction also preserved the fragile polysiloxane backbone. The polymer, grafted with about 25 % of mercapto‐acetamide groups is soluble in polar solvents such as dimethylformamide and dimethyl sulfoxide, opening the way for further functionalization with polar molecules such as unprotected carbohydrates. Spherical and branched gold nanoparticles were coated with these polymers. This coating induced a surface resonance plasmon shift resulting from the interaction of the grafted polysiloxanes with the nanoparticle surface. The shift can be explained by the variation of the refractive index of the side groups but may be also related to the self‐organization of polysiloxanes and their interactions with the gold surface depending on their polarity.     

Liquid crystal alignment capabilities on rubbed organic solvent soluble polyimide surfaces with trifluoromethyl moieties

High pretilt angles, polar anchoring energy (out of plane-tilt), and surface ordering in the nematic liquid crystal 4-n-pentyl-4'-cyanobiphenyl (5CB) were investigated on rubbed organic solvent soluble polyimide (PI) surfaces with a helical backbone structure and trifluoromethyl moieties. It was found that the pretilt angle of 5CB is about 15° in the wide rubbing region of rubbed soluble PI surfaces with trifluoromethyl moieties attached to the lateral benzene rings. It is suggested that the microscopic surface structure of the polymer contributes to the LC pretilt angle generation at the surface. Also, the polar anchoring energy of 5CB is dependent on the molecular structure of these unidirectionally rubbed soluble PI surfaces. The polar anchoring strength of 5CB on rubbed soluble PI surfaces is as weak with trifluoromethyl moieties attached to the lateral benzene rings weak as when the trifluoromethyl moieties are attached to the polymer backbone. Finally, the polar anchoring energy of 5CB strongly depends on the surface ordering of rubbed soluble PI surfaces.     

Homopolymer and block copolymer brushes on gold by living anionic surface‐initiated polymerization in a polar solvent

Living anionic surface‐initiated polymerization on flat gold substrates has been conducted to create uniform homopolymer and diblock copolymer brushes. A 1,1‐diphenylethylene (DPE) self‐assembled monolayer was used as the immobilized precursor initiator. n‐BuLi was used to activate the DPE in tetrahydrofuran at –78 °C to initiate the polymerization of different monomers (styrene, isoprene, ethylene oxide, and methyl methacrylate). Poly(styrene) (PS) and poly(ethylene oxide) (PEO) in particular were first investigated as grafted homopolymers, followed by their copolymers, including poly(isoprene)‐b‐poly(methylmethacrylate) (PI‐b‐PMMA). A combined approach of spectroscopic (Fourier transform infrared spectroscopy, surface plasmon spectroscopy, ellipsometry, X‐ray photoelectron spectroscopy) and microscopic (atomic force microscopy) surface analysis was used to investigate the formation of the polymer brushes in polar solvent media. The chemical nature of the outermost layer of these brushes was studied by water contact angle measurements. The effect of the experimental conditions (solvent, temperature, initiator concentration) on the surface properties of the polymer brushes was also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 769–782, 2006     

Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

Application of inverse gas chromatography in the surface characterization of diethanol amine modified polystyrene based polymer

In the present work, diethanol amine modified polystyrene based polymer (PVBC-Diethanol amine) was synthesized and characterized, then surface properties of the polymer were examined by inverse gas chromatography method at infinite dilution. The retention diagrams obtained based on the interaction of polar and nonpolar probes with the polymer were drawn over a temperature range from 30 to 55 °C. Through the diagrams, the dispersive component of the surface free energy, g _S ^D of the polymer surface, and the specific enthalpy of adsorption, DH _A ^S , of probes on the polymer were also calculated. Lewis acid, K _A , and Lewis base, K _D , parameters of PVBC-Diethanol amine surface were determined. The values of K _A and K _D indicated that PVBC-Diethanol amine surface exhibited a basic behavior.