A finite element immersed boundary method for fluid flow around rigid objects

This paper proposes a new immersed boundary (IB) method for solving fluid flow problems in the presence of rigid objects which are not represented by the mesh. Solving the flow around objects with complex shapes may involve extensive meshing work that has to be repeated each time a change in the geometry is needed. Important benefit would be reached if we are able to solve the flow without the need of generating a mesh that fits the shape of the immersed objects. This work presents a finite element IB method using a discretization covering the entire domain of interest, including the volume occupied by immersed objects, and which produces solutions of the flow satisfying accurately the boundary conditions at the surface of immersed bodies. In other words the finite element solution represents accurately the presence of immersed bodies while the mesh does not. This is done by including additional degrees of freedom on interface cut elements which are then eliminated at element level. The boundary of immersed objects is defined using a level set function. Solutions are shown for various flow problems and the accuracy of the present approach is measured with respect to solutions obtained on body‐fitted meshes. Copyright © 2010 Crown in the right of Canada.     

Adaptive non‐conformal mesh refinement and extended finite element method for viscous flow inside complex moving geometries

Two different techniques to analyze non‐Newtonian viscous flow in complex geometries with internal moving parts and narrow gaps are compared. The first technique is a non‐conforming mesh refinement approach based on the fictitious domain method (FDM), and the second one is the extended finite element method (XFEM). The refinement technique uses one fixed reference mesh, and to impose continuity across non‐conforming regions, constraints using Lagrangian multipliers are used. The size of elements locally in the high shear rate regions is reduced to increase accuracy. FDM is shown to have limitations; therefore, XFEM is applied to decouple the fluid from the internal moving rigid bodies. In XFEM, the discontinuous field variables are captured by using virtual degrees of freedom that serve as enrichment and by applying special integration over the intersected elements. The accuracy of the two methods is demonstrated by direct comparison with results of a boundary‐fitted mesh applied to a two‐dimensional cross section of a twin‐screw extruder. Compared with non‐conforming FDM, XFEM shows a considerable improvement in accuracy around the rigid body, especially in the narrow gap regions. Copyright © 2011 John Wiley & Sons, Ltd.     

A finite element method for free surface flows of incompressible fluids in three dimensions. Part I. Boundary fitted mesh motion

Computational fluid mechanics techniques for examining free surface problems in two‐dimensional form are now well established. Extending these methods to three dimensions requires a reconsideration of some of the difficult issues from two‐dimensional problems as well as developing new formulations to handle added geometric complexity. This paper presents a new finite element formulation for handling three‐dimensional free surface problems with a boundary‐fitted mesh and full Newton iteration, which solves for velocity, pressure, and mesh variables simultaneously. A boundary‐fitted, pseudo‐solid approach is used for moving the mesh, which treats the interior of the mesh as a fictitious elastic solid that deforms in response to boundary motion. To minimize mesh distortion near free boundary under large deformations, the mesh motion equations are rotated into normal and tangential components prior to applying boundary conditions. The Navier–Stokes equations are discretized using a Galerkin–least square/pressure stabilization formulation, which provides good convergence properties with iterative solvers. The result is a method that can track large deformations and rotations of free surface boundaries in three dimensions. The method is applied to two sample problems: solid body rotation of a fluid and extrusion from a nozzle with a rectangular cross‐section. The extrusion example exhibits a variety of free surface shapes that arise from changing processing conditions. Copyright © 2000 John Wiley & Sons, Ltd.     

On the immersed boundary‐lattice Boltzmann simulations of incompressible flows with freely moving objects

For simulating freely moving problems, conventional immersed boundary‐lattice Boltzmann methods encounter two major difficulties of an extremely large flow domain and the incompressible limit. To remove these two difficulties, this work proposes an immersed boundary‐lattice Boltzmann flux solver (IB‐LBFS) in the arbitrary Lagragian–Eulerian (ALE) coordinates and establishes a dynamic similarity theory. In the ALE‐based IB‐LBFS, the flow filed is obtained by using the LBFS on a moving Cartesian mesh, and the no‐slip boundary condition is implemented by using the boundary condition‐enforced immersed boundary method. The velocity of the Cartesian mesh is set the same as the translational velocity of the freely moving object so that there is no relative motion between the plate center and the mesh. This enables the ALE‐based IB‐LBFS to study flows with a freely moving object in a large open flow domain. By normalizing the governing equations for the flow domain and the motion of rigid body, six non‐dimensional parameters are derived and maintained to be the same in both physical systems and the lattice Boltzmann framework. This similarity algorithm enables the lattice Boltzmann equation‐based solver to study a general freely moving problem within the incompressible limit. The proposed solver and dynamic similarity theory have been successfully validated by simulating the flow around an in‐line oscillating cylinder, single particle sedimentation, and flows with a freely falling plate. The obtained results agree well with both numerical and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

High-order ALE method for the Navier–Stokes equations on a moving hybrid unstructured mesh using flux reconstruction method

The flux reconstruction (FR) formulation can unify several popular discontinuous basis high-order methods for fluid dynamics, including the discontinuous Galerkin method, in a simple, efficient form. An arbitrary Lagrangian–Eulerian (ALE) extension to the high-order FR scheme is developed here for moving mesh fluid flow problems. The ALE Navier–Stokes equations are derived by introducing a grid velocity. The conservation law are spatially discretised on hybrid unstructured meshes using Huynh’s scheme (Huynh 2007) on anisotropic elements (quadrilaterals) and using Correction Procedure via Reconstruction scheme on isotropic elements (triangles). The temporal discretisation uses both explicit and implicit treatments. The mesh movement is described by node positions given as a time series, instead of an analytical formula. The geometric conservation law is tested using free stream preservation problem. An isentropic vortex propagation test case is performed to show the high-order accuracy of the developed method on both moving and fixed hybrid meshes. Flow around an oscillating cylinder shows the capability of the method to solve moving boundary viscous flow problems, with the numeric method further verified by comparison of the result on a smoothly deforming mesh and a rigid moving mesh.     

Development of circular function‐based gas‐kinetic scheme (CGKS) on moving grids for unsteady flows through oscillating cascades

In this paper, the circular function‐based gas‐kinetic scheme (CGKS), which was originally developed for simulation of flows on stationary grids, is extended to solve moving boundary problems on moving grids. Particularly, the unsteady flows through oscillating cascades are our major interests. The main idea of the CGKS is to discretize the macroscopic equations by the finite volume method while the fluxes at the cell interface are evaluated by locally reconstructing the solution of the continuous Boltzmann Bhatnagar–Gross–Krook equation. The present solver is based on the fact that the modified Boltzmann equation, which is expressed in a moving frame of reference, can recover the corresponding macroscopic equations with Chapman–Enskog expansion analysis. Different from the original Maxwellian function‐based gas‐kinetic scheme, in improving the computational efficiency, a simple circular function is used to describe the equilibrium state of distribution function. Considering that the concerned cascade oscillating problems belong to cases that the motion of surface boundary is known a priori, the dynamic mesh method is suitable and is adopted in the present work. In achieving the mesh deformation with high quality and efficiency, a hybrid dynamic mesh method named radial basic functions‐transfinite interpolation is presented and applied for cascade geometries. For validation, several numerical test cases involving a wide range are investigated. Numerical results show that the developed CGKS on moving grids is well applied for cascade oscillating flows. And for some cases where nonlinear effects are strong, the solution accuracy could be effectively improved by using the present method. Copyright © 2017 John Wiley & Sons, Ltd.     

Adaptive thermo-fluid moving boundary computations for interfacial dynamics

In this study,we present adaptive moving boundary computation technique with parallel implementation on a distributed memory multi-processor system for large scale thermo-fluid and interfacial flow computations.The solver utilizes Eulerian-Lagrangian method to track moving(Lagrangian) interfaces explicitly on the stationary(Eulerian) Cartesian grid where the flow fields are computed.We address the domain decomposition strategies of Eulerian-Lagrangian method by illustrating its intricate complexity of the computation involved on two different spaces interactively and consequently,and then propose a trade-off approach aiming for parallel scalability.Spatial domain decomposition is adopted for both Eulerian and Lagrangian domain due to easy load balancing and data locality for minimum communication between processors.In addition,parallel cell-based unstructured adaptive mesh refinement(AMR) technique is implemented for the flexible local refinement and even-distributed computational workload among processors.Selected cases are presented to highlight the computational capabilities,including Faraday type interfacial waves with capillary and gravitational forcing,flows around varied geometric configurations and induced by boundary conditions and/or body forces,and thermo-fluid dynamics with phase change.With the aid of the present techniques,large scale challenging moving boundary problems can be effectively addressed.     

A new modification of the immersed‐boundary method for simulating flows with complex moving boundaries

In this paper, a new immersed‐boundary method for simulating flows over complex immersed, moving boundaries is presented. The flow is computed on a fixed Cartesian mesh and the solid boundaries are allowed to move freely through the mesh. The present method is based on a finite‐difference approach on a staggered mesh together with a fractional‐step method. It must be noted that the immersed boundary is generally not coincident with the position of the solution variables on the grid, therefore, an appropriate strategy is needed to construct a relationship between the curved boundary and the grid points nearby. Furthermore, a momentum forcing is added on the body boundaries and also inside the body to satisfy the no‐slip boundary condition. The immersed boundary is represented by a series of interfacial markers, and the markers are also used as Lagrangian forcing points. A linear interpolation is then used to scale the Lagrangian forcing from the interfacial markers to the corresponding grid points nearby. This treatment of the immersed‐boundary is used to simulate several problems, which have been validated with previous experimental results in the open literature, verifying the accuracy of the present method. Copyright © 2006 John Wiley & Sons, Ltd.     

四面体单元网格加密过程中的曲面逼近算法及程序实现

本文介绍了一种在四面体单元网格的加密过程中实现曲面逼近的算法．单元加密采用了最长边加密算法．曲面逼近实现了对二次曲面的逼近功能．当加密点所在边是边界面上的边时，将该点挪到对应的边界面上．挪动时根据该边所参与的两个边界三角形面的法向方向来确定加密点的挪动方向，再结合二次曲面方程来计算出挪动后点的新坐标．算例表明，对于由二次曲面边界围成的物体，这种算法能够有效地实现网格加密过程中的曲面边界逼近功能．     

A hybrid immersed boundary and material point method for simulating 3D fluid–structure interaction problems

A numerical method is developed for solving the 3D, unsteady, incompressible Navier–Stokes equations in curvilinear coordinates containing immersed boundaries (IBs) of arbitrary geometrical complexity moving and deforming under forces acting on the body. Since simulations of flow in complex geometries with deformable surfaces require special treatment, the present approach combines a hybrid immersed boundary method (HIBM) for handling complex moving boundaries and a material point method (MPM) for resolving structural stresses and movement. This combined HIBM & MPM approach is presented as an effective approach for solving fluid–structure interaction (FSI) problems. In the HIBM, a curvilinear grid is defined and the variable values at grid points adjacent to a boundary are forced or interpolated to satisfy the boundary conditions. The MPM is used for solving the equations of solid structure and communicates with the fluid through appropriate interface‐boundary conditions. The governing flow equations are discretized on a non‐staggered grid layout using second‐order accurate finite‐difference formulas. The discrete equations are integrated in time via a second‐order accurate dual time stepping, artificial compressibility scheme. Unstructured, triangular meshes are employed to discretize the complex surface of the IBs. The nodes of the surface mesh constitute a set of Lagrangian control points used for tracking the motion of the flexible body. The equations of the solid body are integrated in time via the MPM. At every instant in time, the influence of the body on the flow is accounted for by applying boundary conditions at stationary curvilinear grid nodes located in the exterior but in the immediate vicinity of the body by reconstructing the solution along the local normal to the body surface. The influence of the fluid on the body is defined through pressure and shear stresses acting on the surface of the body. The HIBM & MPM approach is validated for FSI problems by solving for a falling rigid and flexible sphere in a fluid‐filled channel. The behavior of a capsule in a shear flow was also examined. Agreement with the published results is excellent. Copyright © 2007 John Wiley & Sons, Ltd.     

Numerical simulation of viscous flow interaction with an elastic membrane

A numerical fluid–structure interaction model is developed for the analysis of viscous flow over elastic membrane structures. The Navier–Stokes equations are discretized on a moving body‐fitted unstructured triangular grid using the finite volume method, taking into account grid non‐orthogonality, and implementing the SIMPLE algorithm for pressure solution, power law implicit differencing and Rhie–Chow explicit mass flux interpolations. The membrane is discretized as a set of links that coincide with a subset of the fluid mesh edges. A new model is introduced to distribute local and global elastic effects to aid stability of the structure model and damping effects are also included. A pseudo‐structural approach using a balance of mesh edge spring tensions and cell internal pressures controls the motion of fluid mesh nodes based on the displacements of the membrane. Following initial validation, the model is applied to the case of a two‐dimensional membrane pinned at both ends at an angle of attack of 4° to the oncoming flow, at a Reynolds number based on the chord length of 4 × 10³. A series of tests on membranes of different elastic stiffness investigates their unsteady movements over time. The membranes of higher elastic stiffness adopt a stable equilibrium shape, while the membrane of lowest elastic stiffness demonstrates unstable interactions between its inflated shape and the resulting unsteady wake. These unstable effects are shown to be significantly magnified by the flexible nature of the membrane compared with a rigid surface of the same average shape. Copyright © 2007 John Wiley & Sons, Ltd.     

Parallel finite element simulation of mooring forces on floating objects

The coupling between the equations governing the free‐surface flows, the six degrees of freedom non‐linear rigid body dynamics, the linear elasticity equations for mesh‐moving and the cables has resulted in a fluid‐structure interaction technology capable of simulating mooring forces on floating objects. The finite element solution strategy is based on a combination approach derived from fixed‐mesh and moving‐mesh techniques. Here, the free‐surface flow simulations are based on the Navier–Stokes equations written for two incompressible fluids where the impact of one fluid on the other one is extremely small. An interface function with two distinct values is used to locate the position of the free‐surface. The stabilized finite element formulations are written and integrated in an arbitrary Lagrangian–Eulerian domain. This allows us to handle the motion of the time dependent geometries. Forces and momentums exerted on the floating object by both water and hawsers are calculated and used to update the position of the floating object in time. In the mesh moving scheme, we assume that the computational domain is made of elastic materials. The linear elasticity equations are solved to obtain the displacements for each computational node. The non‐linear rigid body dynamics equations are coupled with the governing equations of fluid flow and are solved simultaneously to update the position of the floating object. The numerical examples includes a 3D simulation of water waves impacting on a moored floating box and a model boat and simulation of floating object under water constrained with a cable. Copyright © 2003 John Wiley & Sons, Ltd.     

High-order curvilinear mesh generation technique based on an improved radius basic function approach

A high-order curvilinear hybrid mesh generation technique is developed for high-order numerical method (eg, discontinuous Galerkin method) applications to improve the accuracy for problems with curve boundary. The grid generation technique is based on an improved radius basic function (RBF) approach by which the straight-edge mesh is converted into high-order curve mesh. Firstly, an initial straight-edge mesh is prepared by traditional grid generation software. Then, high-order interpolation points are inserted into the mesh entities such as edges, faces, and cells according to the final demand of mesh order. To preserve the original geometry, the inserted points on solid wall are then projected onto the CAD model using an open source tool “Open Cascade.” Finally, other inserted points in the field near the solid wall are moved to appropriate positions by the improved RBF approach to avoid tangled cells. If we use the original RBF approach, then the inserted points on the edge and face entities normal to the solid boundary in the region of boundary layer will move to improper positions. To overcome this problem, a weighting based on the local grid aspect ratio between normal direction and tangential direction is introduced into the baseline RBF approach. Three typical configurations are tested to validate the mesh generator. Meanwhile, a third-order solution of subsonic flow over an analytical 3D body of revolution in the second International Workshop on High-Order CFD Methods is supplied by a discontinuous Galerkin solver. These numerical tests demonstrate the potential capability of present technique for high-order simulations of complex geometries.     

一种基于径向基函数的两步法网格变形策略

基于径向基函数(RBF) 的网格变形方法是一种可靠的网格变形技术,对于任意拓扑的网格都能获得高质量的变形网格. 缩减控制点的RBF 网格变形方法可以大幅提高网格变形效率,但也存在变形后物面误差较大、边界层网格交错的问题. 在缩减控制点方法的基础上,提出了一种适合于带有边界层的黏性网格变形的方法,该方法从物面中选择两组控制点,利用其中一组控制点粗略计算变形后网格位置及变形误差,利用第二组控制点与变形误差插值得到更为精确的变形网格. 利用该方法完成带襟翼的NLR 7301 二维构型和带发动机短舱的DLR F6 翼身组合体的网格变形问题,结果表明该方法可以较大幅度降低变形网格的物面误差,并且有效避免边界层网格交错问题.      

Numerical modeling of flow past a volumeless and thin rigid body using direct forcing immersed boundary method

The new capability has been added as the numerical method for modeling volumeless and thin rigid bodies to the direct forcing immersed boundary (DFIB) method. The DFIB approach is based on adding a virtual force to the Navier–Stokes equations of incompressible flow to account for the interaction between the fluid and structures. The volume of a solid function (VOS) identifies the stationary or moving solid structures in a given fluid domain. A new VOS-based algorithm was developed to identify thin, rigid structure boundary points in fluid flow and ensure that the fluid cannot cross through the boundary of a thin rigid structure while moving or stationary. The DFIB method was first validated in a three-dimensional (3D) turbulent flow over a circular cylinder. The large-eddy simulation simulated the turbulent flow scales. The proposed algorithm was tested using a 3D turbulent flow past a stationary and rotating Savonius wind turbine that functions as a thin, rigid body. The validation results showed that the selected DFIB approach, combined with the novel algorithm, could simulate a thin, volumeless, rigid structure that is stationary and rotating in incompressible turbulent flows. The current method is also applicable for two-way fluid-structure interaction problems.     

An approach of dynamic mesh adaptation for simulating 3‐dimensional unsteady moving‐immersed‐boundary flows

In this paper, we present an approach of dynamic mesh adaptation for simulating complex 3‐dimensional incompressible moving‐boundary flows by immersed boundary methods. Tetrahedral meshes are adapted by a hierarchical refining/coarsening algorithm. Regular refinement is accomplished by dividing 1 tetrahedron into 8 subcells, and irregular refinement is only for eliminating the hanging points. Merging the 8 subcells obtained by regular refinement, the mesh is coarsened. With hierarchical refining/coarsening, mesh adaptivity can be achieved by adjusting the mesh only 1 time for each adaptation period. The level difference between 2 neighboring cells never exceeds 1, and the geometrical quality of mesh does not degrade as the level of adaptive mesh increases. A predictor‐corrector scheme is introduced to eliminate the phase lag between adapted mesh and unsteady solution. The error caused by each solution transferring from the old mesh to the new adapted one is small because most of the nodes on the 2 meshes are coincident. An immersed boundary method named local domain‐free discretization is employed to solve the flow equations. Several numerical experiments have been conducted for 3‐dimensional incompressible moving‐boundary flows. By using the present approach, the number of mesh nodes is reduced greatly while the accuracy of solution can be preserved.     

A weakly compressible MPS method for modeling of open‐boundary free‐surface flow

A mesh‐free particle method, based on the moving particle semi‐implicit (MPS) interaction model, has been developed for the simulation of two‐dimensional open‐boundary free‐surface flows. The incompressibility model in the original MPS has been replaced with a weakly incompressible model. The effect of this replacement on the efficiency and accuracy of the model has been investigated. The new inflow–outflow boundary conditions along with the particle recycling strategy proposed in this study extend the application of the model to open‐boundary problems. The final model is able to simulate open‐boundary free surface flow in cases of large deformation and fragmentation of free surface. The models and proposed algorithms have been validated and applied to sample problems. The results confirm the model's efficiency and accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

Mesh adaptation for simulation of unsteady flow with moving immersed boundaries

In this work, an approach for performing mesh adaptation in the numerical simulation of two‐dimensional unsteady flow with moving immersed boundaries is presented. In each adaptation period, the mesh is refined in the regions where the solution evolves or the moving bodies pass and is unrefined in the regions where the phenomena or the bodies deviate. The flow field and the fluid–solid interface are recomputed on the adapted mesh. The adaptation indicator is defined according to the magnitude of the vorticity in the flow field. There is no lag between the adapted mesh and the computed solution, and the adaptation frequency can be controlled to reduce the errors due to the solution transferring between the old mesh and the new one. The preservation of conservation property is mandatory in long‐time scale simulations, so a P1‐conservative interpolation is used in the solution transferring. A nonboundary‐conforming method is employed to solve the flow equations. Therefore, the moving‐boundary flows can be simulated on a fixed mesh, and there is no need to update the mesh at each time step to follow the motion or the deformation of the solid boundary. To validate the present mesh adaptation method, we have simulated several unsteady flows over a circular cylinder stationary or with forced oscillation, a single self‐propelled swimming fish, and two fish swimming in the same or different directions. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of local DFD method to simulate unsteady flows around an oscillating circular cylinder

In this paper, the recently proposed local domain‐free discretization (DFD) method is applied to simulate incompressible flows around an oscillating circular cylinder. It is found that it is very easy for the local DFD method to handle such moving boundary flow problems. This is because it does not need to move the mesh, which is indeed needed in traditional methods. Numerical experiments show that the present numerical results agree very well with the available data in the literature, and that the local DFD method is an effective tool for the computation of moving boundary flow problems. Copyright © 2008 John Wiley & Sons, Ltd.     

Transient flow around an impulsively started cylinder using a dynamic mesh method

The finite volume method (FVM) with a dynamic mesh method (DMM) to deal with the moving boundary was applied to the simulation of two-dimensional incompressible viscous flow past a circular cylinder that is impulsively started into rotation and translation. The non-dimensional rotating to translating speed ratio α is varied from 0.28 to 2.07, with the Reynolds number being 200 for the range of α. The computation covers a period, during which the cylinder translates seven times its diameter. The current scheme handles the impulsively moving boundary directly by DMM, which is implemented using both mesh deforming and local remeshing. The instantaneous asymmetrical flow configurations for various α are presented and compared with the experimental visualizations. Quantitatively, the velocity distributions with drag and lift coefficients are also compared with the experimental and numerical results. Results show that the flow is strongly influenced by the rotation. Comparisons are found to be satisfactory.