Collision energy dependence of the O(1D) + HCl --> OH + Cl(2P) reaction studied by crossed beam scattering and quasiclassical trajectory calculations on ab initio potential energy surfaces

The dynamics of the O(1D) + HCl --> OH + Cl(2P) reaction are investigated by a crossed molecular beam ion-imaging method and quasiclassical trajectory calculations on the three ab initio potential energy surfaces, the ground 1(1)A' and two excited (1(1)A' and 2(1)A') states. The scattering experiment was carried out at collision energies of 4.2, 4.5, and 6.4 kcal/mol. The observed doubly differential cross sections (DCSs) for the Cl(2P) product exhibit almost no collision energy dependence over this inspected energy range. The nearly forward-backward symmetric DCS indicates that the reaction proceeds predominantly on the ground-state potential energy surface at these energies. Variation of the forward-backward asymmetry with collision energy is interpreted using an osculating complex model. Although the potential energy surfaces obtained by CASSCF-MRCI ab initio calculations exhibit relatively low potential barriers of 1.6 and 6.5 kcal/mol for 1(1)A' and 2(1)A', respectively, the dynamics calculations indicate that contributions of these excited states are small at the collision energies lower than 15.0 kcal/mol. Theoretical DCSs calculated for the ground-state reaction pathway agree well with the observed ones. These experimental and theoretical results suggest that the titled reaction at collision energies less than 6.5 kcal/mol is predominantly via the ground electronic state.     

Cl2O photochemistry: ultraviolet/vis absorption spectrum temperature dependence and O(3P) quantum yield at 193 and 248 nm

The photochemistry of Cl(2)O (dichlorine monoxide) was studied using measurements of its UV/vis absorption spectrum temperature dependence and the O((3)P) atom quantum yield, Φ(Cl(2)O)(O)(λ), in its photolysis at 193 and 248 nm. The Cl(2)O UV/vis absorption spectrum was measured over the temperature range 201-296 K between 200 and 500 nm using diode array spectroscopy. Cl(2)O absorption cross sections, σ(Cl(2)O)(λ,T), at temperatures <296 K were determined relative to its well established room temperature values. A wavelength and temperature dependent parameterization of the Cl(2)O spectrum using the sum of six Gaussian functions, which empirically represent transitions from the ground (1)A(1) electronic state to excited states, is presented. The Gaussian functions are found to correlate well with published theoretically calculated vertical excitation energies. O((3)P) quantum yields in the photolysis of Cl(2)O at 193 and 248 nm were measured using pulsed laser photolysis combined with atomic resonance fluorescence detection of O((3)P) atoms. O((3)P) quantum yields were measured to be 0.85 ± 0.15 for 193 nm photolysis at 296 K and 0.20 ± 0.03 at 248 nm, which was also found to be independent of temperature (220-352 K) and pressure (17 and 28 Torr, N(2)). The quoted uncertainties are at the 2σ (95% confidence) level and include estimated systematic errors. ClO radical temporal profiles obtained following the photolysis of Cl(2)O at 248 nm, as reported previously in Feierabend et al. [J. Phys. Chem. A 114, 12052, (2010)], were interpreted to establish a <5% upper-limit for the O + Cl(2) photodissociation channel, which indicates that O((3)P) is primarily formed in the three-body, O + 2Cl, photodissociation channel at 248 nm. The analysis also indirectly provided a Cl atom quantum yield of 1.2 ± 0.1 at 248 nm. The results from this work are compared with previous studies where possible.     

Time-dependent quantum study of the kinetics of the H(2S) + FO(2II) OH(2II) + F(2P) reaction

Quantum mechanical wave packet calculations are carried out for the H((2)S) + FO((2)II) --> OH((2)II) + F((2)P) reaction on the adiabatic potential energy surface of the ground (3)A' triplet state. The state-to-state and state-to-all reaction probabilities for total angular momentum J = 0 have been calculated. The probabilities for J > 0 have been estimated from the J = 0 results by using J-shifting approximation based on a capture model. Then, the integral cross sections and initial state-selected rate constants have been calculated. The calculations show that the initial state-selected reaction probabilities are dominated by many sharp peaks. The reaction cross section does not manifest any sharp oscillations and the initial state-selected rate constants are sensitive to the temperature.     

Optical control of ground-state atomic orbital alignment: Cl(2P3/2) atoms from HCl(v=2,J=1) photodissociation

H(35)Cl(v=0,J=0) molecules in a supersonic expansion were excited to the H(35)Cl(v=2,J=1,M=0) state with linearly polarized laser pulses at about 1.7 microm. These rotationally aligned J=1 molecules were then selectively photodissociated with a linearly polarized laser pulse at 220 nm after a time delay, and the velocity-dependent alignment of the (35)Cl((2)P(32)) photofragments was measured using 2+1 REMPI and time-of-flight mass spectrometry. The (35)Cl((2)P(32)) atoms are aligned by two mechanisms: (1) the time-dependent transfer of rotational polarization of the H(35)Cl(v=2,J=1,M=0) molecule to the (35)Cl((2)P(32)) nuclear spin [which is conserved during the photodissociation and thus contributes to the total (35)Cl((2)P(32)) photofragment atomic polarization] and (2) the alignment of the (35)Cl((2)P(32)) electronic polarization resulting from the photoexcitation and dissociation process. The total alignment of the (35)Cl((2)P(32)) photofragments from these two mechanisms was found to vary as a function of time delay between the excitation and the photolysis laser pulses, in agreement with theoretical predictions. We show that the alignment of the ground-state (35)Cl((2)P(32)) atoms, with respect to the photodissociation recoil direction, can be controlled optically. Potential applications include the study of alignment-dependent collision effects.     

A time-dependent wave packet study of the vibronic and spin-orbit interactions in the dynamics of Cl((2)P)+H(2)-->HCl(X (1)Sigma(g) (+))+H((2)S) reaction

We investigate the vibronic and spin-orbit (SO) coupling effects in the state-selected dynamics of the title reaction with the aid of a time-dependent wave packet approach. The ab initio potential energy surfaces of Capecchi and Werner [Science 296, 715 (2002)] have been employed for this purpose. Collinear approach of the Cl((2)P) atom to the H(2) molecule splits the degeneracy of the (2)P state and gives rise to (2)Sigma and (2)Pi electronic states. These two surfaces form a conical intersection at this geometry. These states transform as 1 (2)A('), 1 (2)A("), and 2 (2)A('), respectively, at the nonlinear configurations of the nuclei. In addition, the SO interaction due to Cl atom further splits these states into (2)Sigma(1/2), (2)Pi(3/2), and (2)Pi(1/2) components at the linear geometry. The ground-state reagent Cl((2)P(3/2))+H(2) correlates with (2)Sigma(1/2) and (2)Pi(3/2), where as the SO excited reagent Cl(*)((2)P(1/2))+H(2) correlates with (2)Pi(1/2) at the linear geometry. In order to elucidate the impact of the vibronic and SO coupling effects on the initial state-selected reactivity of these electronic states we carry out quantum scattering calculations based on a flux operator formalism and a time-dependent wave packet approach. In this work, total reaction probabilities and the time dependence of electronic population of the system by initiating the reaction on each of the above electronic states are presented. The role of conical intersection alone on the reaction dynamics is investigated with a coupled two-state model and for the total angular momentum J=0 (neglecting the electronic orbital angular momentum) both in a diabatic as well as in the adiabatic electronic representation. The SO interaction is then included and the dynamics is studied with a coupled three-state model comprising six diabatic surfaces for the total angular momentum J=0.5 neglecting the Coriolis Coupling terms of the Hamiltonian. Companion calculations are carried out for the uncoupled adiabatic and diabatic surfaces in order to explicitly reveal the impact of two different surface coupling mechanisms in the dynamics of this prototypical reaction.     

C-Cl bond fission dynamics and angular momentum recoupling in the 235 nm photodissociation of allyl chloride

The photodissociation dynamics of allyl chloride at 235 nm producing atomic Cl((2)P(J);J=1/2,3/2) fragments is investigated using a two-dimensional photofragment velocity ion imaging technique. Detection of the Cl((2)P(1/2)) and Cl((2)P(3/2)) products by [2+1] resonance enhanced multiphoton ionization shows that primary C-Cl bond fission of allyl chloride generates 66.8% Cl((2)P(3/2)) and 33.2% Cl((2)P(1/2)). The Cl((2)P(3/2)) fragments evidenced a bimodal translational energy distribution with a relative weight of low kinetic energy Cl((2)P(3/2))/high kinetic energy Cl((2)P(3/2)) of 0.097/0.903. The minor dissociation channel for C-Cl bond fission, producing low kinetic energy chlorine atoms, formed only chlorine atoms in the Cl((2)P(3/2)) spin-orbit state. The dominant C-Cl bond fission channel, attributed to an electronic predissociation that results in high kinetic energy Cl atoms, produced both Cl((2)P(1/2)) and Cl((2)P(3/2)) atomic fragments. The relative branching for this dissociation channel is Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))]=35.5%. The average fraction of available energy imparted into product recoil for the high kinetic energy products was found to be 59%, in qualitative agreement with that predicted by a rigid radical impulsive model. Both the spin-orbit ground and excited chlorine atom angular distributions were close to isotropic. We compare the observed Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))] ratio produced in the electronic predissociation channel of allyl chloride with a prior study of the chlorine atom spin-orbit states produced from HCl photodissociation, concluding that angular momentum recoupling in the exit channel at long interatomic distance determines the chlorine atom spin-orbit branching.     

Quantum state-to-state dynamics for the quenching process of Br(2P1/2) + H2(v(i) = 0, 1, j(i) = 0)

Quantum state-to-state dynamics for the quenching process Br((2)P(1/2)) + H(2)(v(i) = 0, 1, j(i) = 0) → Br((2)P(3/2)) + H(2)(v(f), j(f)) has been studied based on two-state model on the recent coupled potential energy surfaces. It was found that the quenching probabilities have some oscillatory structures due to the interference of reflected flux in the Br((2)P(1/2)) + H(2) and Br((2)P(3/2)) + H(2) channels by repulsive potential in the near-resonant electronic-to-vibrational energy transfer process. The final vibrational state resolved integral cross sections were found to be dominated by the quenching process Br((2)P(1/2)) + H(2)(v) → Br((2)P(3/2)) + H(2)(v+1) and the nonadiabatic reaction probabilities for Br((2)P(1/2)) + H(2)(v = 0, 1, j(i) = 0) are quite small, which are consistent with previous theoretical and experimental results. Our calculated total quenching rate constant for Br((2)P(1/2)) + H(2)(v(i) = 0, j(i) = 0) at room temperature is in good agreement with the available experimental data.     

An investigation of nonadiabatic interactions in Cl(2Pj) + D2 via crossed-molecular-beam scattering

We have determined limits on the cross section for both electronically nonadiabatic excitation and quenching in the Cl((2)P(j)) + D(2) system. Our experiment incorporates crossed-molecular-beam scattering with state-selective Cl((2)P(12,32)) detection and velocity-mapped ion imaging. By colliding atomic chlorine with D(2), we address the propensity for collisions that result in a change of the spin-orbit level of atomic chlorine either through electronically nonadiabatic spin-orbit excitation Cl((2)P(32)) + D(2)-->Cl(*)((2)P(12)) + D(2) or through electronically nonadiabatic spin-orbit quenching Cl(*)((2)P(12)) + D(2)-->Cl((2)P(32)) + D(2). In the first part of this report, we estimate an upper limit for the electronically nonadiabatic spin-orbit excitation cross section at a collision energy of 5.3 kcal/mol, which lies above the energy of the reaction barrier (4.9 kcal/mol). Our analysis and simulation of the experimental data determine an upper limit for the excitation cross section as sigma(NA)< or =0.012 A(2). In the second part of this paper we investigate the propensity for electronically nonadiabatic spin-orbit quenching of Cl(*) following a collision with D(2) or He. We perform these experiments at collision energies above and below the energy of the reaction barrier. By comparing the amount of scattered Cl(*) in our images to the amount of Cl(*) lost from the atomic beam we obtain the maximum cross section for electronically nonadiabatic quenching as sigma(NA)< or =15(-15) (+44) A(2) for a collision energy of 7.6 kcal/mol. Our experiments show the probability for electronically nonadiabatic quenching in Cl(*) + D(2) to be indistinguishable to that for the kinematically identical system of Cl(*) + He.     

Quantum and quasiclassical studies of the O(3P)+HCl-->OH+Cl(2P) reaction using benchmark potential surfaces

We have performed quantum mechanical (QM) dynamics calculations within the independent-state approximation with new benchmark triplet A" and A' surfaces [B. Ramachandran et al., J. Chem. Phys. 119, 9590 (2003)] for the rovibronic state-to-state measurements of the reaction O(3P)+HCl(v=2,j=1,6,9)-->OH(v'j')+Cl(2P) [Zhang et al., J. Chem. Phys. 94, 2704 (1991)]. The QM and experimental rotational distributions peak at similar OH(j') levels, but the QM distributions are significantly narrower than the measurements and previous quasiclassical dynamics studies. The OH(low j) populations observed in the measurements are nearly absent in the QM results. We have also performed quasiclassical trajectory with histogram binning (QCT-HB) calculations on these same benchmark surfaces. The QCT-HB rotational distributions, which are qualitatively consistent with measurements and classical dynamics studies using other surfaces, are much broader than the QM results. Application of a Gaussian binning correction (QCT-GB) dramatically narrows and shifts the QCT-HB rotational distributions to be in very good agreement with the QM results. The large QCT-GB correction stems from the special shape of the joint distribution of the classical rotational/vibrational action of OH products. We have also performed QM and QCT calculations for the transition, O+HCl(v=0,T=300 K)-->OH(v'j')+Cl from threshold to approximately 130 kcal mol(-1) collision energy as a guide for possible future hyperthermal O-atom measurements. We find in general a mixed energy release into translation and rotation consistent with a late barrier to reaction. Angular distributions at high collision energy are forward peaked, consistent with a stripping mechanism. Direct collisional excitation channel cross sections, O+HCl(v=0,T=300 K)-->O+HCl(v'=1), in the same energy range are large, comparable in magnitude to the reactive channel cross sections. Although the (3)A" state dominates most collision processes, above approximately 48 kcal mol(-1), the (3)A' state plays the major role in collisional excitation.     

Collision dynamics of O(3P) + DMMP using a specific reaction parameters potential form

Starting from previous benchmark CBS-QB3 electronic structure calculations (Conforti, P. F.; Braunstein, M.; Dodd, J. A. J. Phys. Chem. A 2009, 113, 13752), we develop two global potential energy surfaces for O((3)P) + DMMP collisions, using the specific reaction parameters approach. Each surface is simultaneously fit along the three major reaction pathways: hydrogen abstraction, hydrogen elimination, and methyl elimination. We then use these surfaces in classical dynamics simulations and compute reactive cross sections from 4 to 10 km s(-1) collision velocity. We examine the energy disposal and angular distributions of the reactive and nonreactive products. We find that for reactive collisions, an unusually large amount of the initial collision energy is transformed into internal energy. We analyze the nonreactive and reactive product internal energy distributions, many of which fit Boltzmann temperatures up to ~2000 K.     

Potential surfaces and dynamics of the O(3P)+H2O(X1A1)-->OH(X2pi)+OH(X2pi) reaction

We present global potential energy surfaces for the three lowest triplet states in O(3P)+H2O(X1A1) collisions and present results of classical dynamics calculations on the O(3P)+H2O(X1A1)-->OH(X2pi)+OH(X2pi) reaction using these surfaces. The surfaces are spline-based fits of approximately 20,000 fixed geometry ab initio calculations at the complete-active-space self-consistent field+second-order perturbation theory (CASSCF+MP2) level with a O(4s3p2d1f)/H(3s2p) one electron basis set. Computed rate constants compare well to measurements in the 1000-2500 K range using these surfaces. We also compute the total, rovibrationally resolved, and differential angular cross sections at fixed collision velocities from near threshold at approximately 4 km s(-1) (16.9 kcal mol(-1) collision energy) to 11 km s(-1) (122.5 kcal mol(-1) collision energy), and we compare these computed cross sections to available space-based and laboratory data. A major finding of the present work is that above approximately 40 kcal mol(-1) collision energy rovibrationally excited OH(X2pi) products are a significant and perhaps dominant contributor to the observed 1-5 micro spectral emission from O(3P)+H2O(X1A1) collisions. Another important result is that OH(X2pi) products are formed in two distinct rovibrational distributions. The "active" OH products are formed with the reagent O atom, and their rovibrational distributions are extremely hot. The remaining "spectator" OH is relatively rovibrationally cold. For the active OH, rotational energy is dominant at all collision velocities, but the opposite holds for the spectator OH. Summed over both OH products, below approximately 50 kcal mol(-1) collision energy, vibration dominates the OH internal energy, and above approximately 50 kcal mol(-1) rotation is greater than vibrational energy. As the collision energy increases, energy is diverted from vibration to mostly translational energy. We note that the present fitted surfaces can also be used to investigate direct collisional excitation of H2O(X1A1) by O(3P) and also OH(X2pi)+OH(X2pi) collisions.     

The investigation of spin-orbit effect for the F((2)P)+HD reaction

In this paper, we employ the time-dependent quantum wave packet method to study the reaction of F((2)P(3/2), (2)P(1/2)) with HD on the Alexander-Stark-Werner potential energy surface. The reaction probabilities and total integral cross sections of the spin-orbit ground and excited states for the two possible products of the system are calculated. Because the reaction channel of the excited spin-orbit state is closed at the resonance energy, the resonance feature does not appear in the reaction probabilities and cross section for the F((2)P(1/2))+HD(v=j=0)-->HF+D reaction, in contrast with that found for the ground spin--orbit state. We also compare the average cross sections of the two possible products with the experimental measurement. The resonance peak in the present average cross section for the HF+D product is slightly larger than the experimental result, but much smaller than that of the single-state calculations on the potential energy surface of Stark and Werner. It seems that the spin--orbit coupling would play a relatively important role in this reaction. Moreover, the isotope effects of the ground and excited spin--orbit states and the reactivity of the two product channels from the excited spin--orbit state are presented.     

Quantum wave packet dynamics of N(2D)+H2 reaction

The quantum wave packet dynamics of the title reaction within the coupled state approximation is examined here and initial state-selected reaction probabilities, integral reaction cross sections, and thermal rate constants are reported. The ab initio potential energy surface of the electronic ground state (1(2)A(")) of the system recently reported by Ho et al. [J. Chem. Phys., 119, 3063 (2003)] is employed in this investigation. All partial wave contributions up to the total angular momentum J=55 were necessary to obtain converged integral reaction cross sections up to a collision energy of 1.0 eV. Thermal rate constants are calculated from the reaction cross sections and compared with the available theoretical and experimental results. Typical resonances formed during the course of the reaction and elucidating the insertion type mechanism for the product formation are calculated. Vibrational energy levels supported by the deep well (approximately 5.5 eV) of the 1(2)A(") potential energy surface of NH(2) are also calculated for the total angular momentum J=0. A statistical analysis of the spacing between the adjacent levels of this energy spectrum is performed and the extent of irregularity in the spectral sequence is assessed.     

Vibrational state-dependent predissociation dynamics of ClO (A (2)Pi(3/2)): Insight from correlated fine structure branching ratios

We have studied the v'-dependent predissociation dynamics of the ClO A (2)Pi(3/2) state using velocity-map ion-imaging. Experimental final correlated state branching ratios, i.e. Cl((2)P(J=3/2,1/2)) + O((3)P(J=2,1,0)) channels, have been measured for v' = 6-11. We find that the branching ratios are highly variable and depend strongly on v', providing a window into the v'-dependent predissociation mechanism. A comparison of the experimental results with the recent model of Lane et al. (I. C. Lane, W. H. Howie and A. J. Orr-Ewing, Phys. Chem. Chem. Phys., 1999, 1, 3087) in both the diabatic and adiabatic limits suggests that the dynamics are closer to the diabatic limit. The overall Cl((2)P(J)) branching ratios are in good agreement with the diabatic model results. There are significant differences, however, between theory and experiment at the correlated state level, demonstrating the sensitivity of correlated measurements to the role of the exit channel coupling in the predissociation dynamics. The results highlight the need for more sophisticated quantum dynamical calculations to describe the correlated fine structure branching ratios in this system.     

Significant change of alignment effect by dimer formation in the dissociative energy transfer reaction of Ar(3P2)+(N2O)n and (H2O)n

An alignment effect in the dissociative energy transfer reaction of Ar((3)P(2))+(X(2)O)(n)(X=N,H) was directly measured using an oriented Ar((3)P(2),M(J)=2) beam. The chemiluminescence intensity of N(2)(B,(3)Pi(g)) for (N(2)O)(n) and OH(A,(2)Sigma(+)) for (H(2)O)(n) was measured as a function of the magnetic orientation field direction in the collision frame. The relative reaction cross section for each magnetic substate in the collision frame, sigma(M(J) (') ), was determined. In both the reaction systems, it is observed that the dimer formation significantly enhances the alignment effect and decreases the reactivity, especially for sigma|1| and sigma|2|. A significant contribution of rank 4 moment is recognized in the dimer reaction.     

Time-dependent wave packet studies on the Cl + HCl hydrogen exchange reaction

The initiation of the hydrogen exchange reaction Cl((2)P)+HCl --> ClH+Cl((2)P) by excitation of the HCl molecular stretch to v=2 is studied for total angular momentum quantum number J=(1)/(2) and both even and odd parity. The calculations were performed using a time-dependent propagation from an initial quasi-bound state and employed all three relevant potential energy surfaces and the nonadiabatic couplings between them. Coriolis and spin-orbit coupling were also taken into account. The electronic and HCl rotational distributions of the products in both dissociation channels are analyzed, and the results are interpreted using features of the potential energy surfaces.     

ClO radical yields in the reaction of O(1D) with Cl2, HCl, chloromethanes, and chlorofluoromethanes

Absolute ClO radical product yields in the gas-phase reactions of O((1)D) with Cl(2), HCl, CCl(4), CHCl(3), CH(2)Cl(2), CH(3)Cl, CFCl(3), CF(2)Cl(2), CF(3)Cl, CHFCl(2), and CHF(2)Cl are reported. Product yields were measured using pulsed-laser photolysis of O(3) to produce O((1)D) in the presence of excess reactant combined with dual wavelength differential cavity ring-down spectroscopic detection of the ClO radical. ClO radical absorption cross sections for the A(2)Π(v = 10) ← X(2)Π(v = 0) transition band head near 280 nm were determined between 200 and 296 K as part of this work. The ClO product yields obtained at room temperature were Cl(2) (0.77 ± 0.10), HCl (0.20 ± 0.04), CCl(4) (0.79 ± 0.04), CHCl(3) (0.77 ± 0.04), CH(2)Cl(2) (0.73 ± 0.04), CH(3)Cl (0.46 ± 0.06), CFCl(3) (0.79 ± 0.04), CF(2)Cl(2) (0.76 ± 0.06), CF(3)Cl (0.82 ± 0.06), CHFCl(2) (0.73 ± 0.05), and CHF(2)Cl (0.56 ± 0.03), where the quoted error limits are 2σ of the measurement precision. ClO product yields in the O((1)D) + Cl(2) and CFCl(3) reactions were found to be independent of temperature between 200 and 296 K, within the precision of the measurements. The absolute ClO yields obtained in this study are compared with previously reported values determined using relative and indirect methods.     

Cross sections and thermal rate constants for the isotope exchange reaction: D(2S)+OH(2Pi)-->OD(2Pi)+H(2S)

We report state-to-state and overall thermal rate constants for the isotope exchange reaction D((2)S)+OH((2)Pi)-->OD((2)Pi)+H((2)S) for 0 K相似文献