A study on generation of noise by high-speed pulsating jets

This paper describes the noise generation in an exhaust system of a reciprocating engine and focuses on the noise generated by shock/vortex interaction. The pulsating flow through the exhaust pipe consists of the compression and expansion wave, shock wave being generated by the non-linearity of the compression wave at its head. The jet noise is produced when the pulsating flow is discharged from the pipe end into atmosphere. The numerical simulation based on a finite difference method and experiment were made, the result of both of them being compared. First, the flow field in the pipe was obtained to easily discuss the characteristic of the pulsating jet in terms of the pressure history in the pipe. The jet structure was visualized by using schlieren and shadowgraph techniques. Sound pressure measurements at various locations were made in order to survey the directivity of the noise. The comparison between the result of numerical calculation and experiment showed a good agreement. A noise source related to shock/vortex interaction was confirmed by the numerical study clearly.     

A study of pulsatile jet discharged from pipe end

Noise is generated from a flow field upstream of a shock wave periodically discharged from a pipe end. A vortex ring and an underexpanded jet are periodically formed and diffused downstream. To clarify the mechanism of the noise generation, the flow field was experimentally and numerically studied. The flow field was visualized mainly by the schlieren method and the sound pressure of the noise was measured. The pulsatile flow through the pipe was numerically simulated by Random-Choice Method and using these results as the boundary condition, the pulsatile jet was simulated by TVD scheme. As a result, a good qualitative agreement was found between the flow field obtained by the calculations and that by the experiments. Furthermore, a relation between the behaviour of the vortex ring and the generation of the noise was discussed.     

Effect of the incident shock wave interacting with transversal jet flow on the mixing and combustion

The interaction between an incident shock wave and a transverse jet flow for mixing and combustion in a supersonic airstream was investigated experimentally and numerically. NO planar laser induced fluorescence (NO-PLIF) and particle imaging velocimetry (PIV) for non-reactive flows and three-dimensional reactive/non-reactive numerical simulations were conducted to examine the effect of the incident shock wave on the three-dimensional flow structure and mixing mechanism between the airstream and the injected gas downstream of the injection slot. Results of NO-PLIF measurement and numerical simulation showed that, in the case without the incident shock wave, injected gas is seldom seen in the recirculation zone just downstream of the injection slot, while the injected gas with higher concentration is almost uniformly distributed in the recirculation zone when the incident shock wave is introduced downstream of the injection slot. Moreover, it was shown by the numerical simulations that the profiles of the local equivalence ratio is in the combustible range due to the enhanced entrainment of the airstream when the incident shock wave is introduced downstream of the injection slot. A large-scale recirculation in the direction parallel to the wall is generated by the three-dimensional flow effects, which enhances the mixing and extends the residence time in the recirculation zone in the case with incident shock wave downstream of the injection slot, the recirculation flow being confirmed successfully by PIV measurements as well. The results of three-dimensional reactive numerical simulations were in good agreement with the experimental flame-holding characteristics at a lower total temperature, which showed that flame-holding can be attained only when the incident shock wave was introduced downstream of the injection slot, confirming that the formation of three-dimensional and large-scale recirculation flow downstream of the injection slot enlarges the recirculation zone and enhances the mixing to produce the conditions for robust flame-holding.     

A study of noise reduction by acoustic shock waves

I.IntroductionAcousticshockwavcs(ASW)isanimportantphcnomcnoninnonlinearacoustics.Experimentalrcsultshavcshownthatwhenanaircraftcngincinletopcratesneartheson-iccondition,vcrystrongnoisegcncratedbythcfanscanbcreduccdgreat1yowingtothcformationofASWatthcthroatofthcin1etll].ASWisadiscontinuityofacousticvaria-bles,whichisdifTcrcntfromthcshockwavesoccurringinhighspcedsteadyflowinducts.Theformer'sintensityismuch1cssthanthelattcr's.Furthcrmorc,thepositionandintensityofASWisalwayschangedwithtime.l…     

Experimental observation of the blob-generation mechanism from interchange waves in a plasma

The mechanism for blob generation in a toroidal magnetized plasma is investigated using time-resolved measurements of two-dimensional structures of electron density, temperature, and plasma potential. The blobs are observed to form from a radially elongated structure that is sheared off by the E x B flow. The structure is generated by an interchange wave that increases in amplitude and extends radially in response to a decrease of the radial pressure scale length. The dependence of the blob amplitude upon the pressure radial scale length is discussed.     

An investigation into noise radiation from flow control valves with particular reference to flow rate measurement

Flow control valve noise has been investigated, both analytically and experimentally, for two cases of variable orifice area and variable mass flow rate. The analysis is based on Lighthill's acoustic analogy, together with Curle's theory for noise generation from fluid-solid boundary interactions. Results indicate that monitoring sound levels of valve noise could be useful as a feasible means for flow rate measurements and on-line automatic flow control in pipes.     

Initiation and propagation of detonation waves in combustible high speed flows

The initiation and propagation of detonation waves in combustible high speed flows were studied experimentally. A planar detonation wave traveling in an initiation tube was transmitted into a test section where a combustible high speed flow was induced by an incident shock wave generated in a shock tube. In this study, the flow Mach numbers were obtained as 0.9 and 1.2. The experimental results show that depending on the flow velocity, the apparent propagation velocity of a detonation wave is higher in the upstream and lower in the downstream direction than the CJ velocity. Smoked plate records reveal cellular patterns deformed in the flow direction, and the calculated aspect ratios of the cell were found to agree well with the experimental ones on the basis of the assumption that the velocity of the transverse wave is not affected by the flowing mixture. By analyzing the shock-wave diffraction at the position where there is an abrupt change in the area, on the basis of Whitham’s theory, it was deduced that in the present experimental set-up, the detonation was initiated by the reflection of the diffracted shock waves on the sidewalls of the test section. The agreement between the experimental and calculated results regarding the position of the cellular patterns on the smoked plate record indicated that the position of detonation initiation in high speed flows is shifted downstream due to the flow velocity.     

超声速气膜冷却中激波抑制的研究

针对激波破坏超声速气膜冷却的机理,本文提出了一种壁面开孔的结构,数值研究结果表明：一方面,壁面开孔的结构能使激波作用的区域壁面附近的压力分布较均匀,从而使近壁区的马赫数分布比不开孔的壁面要高,有利于超声速气膜冷却。同时在激波的作用下,冷却气体可以通过开孔壁面的孔进入槽道内,而在槽内的下游再从孔里流出,保护下游的壁面,这...     

Reduction of the sonic boom level in supersonic aircraft flight by the method of surface cooling

Based on the analysis of various aspects of creating a supersonic transport aircraft of the second generation, the necessity of developing unconventional active methods of sonic boom level reduction is demonstrated. Surface cooling is shown to exert a significant effect on formation of the disturbed flow structure up to large distances from the body by an example of a supersonic flow around a body of revolution. A method of reducing the intensity of the intermediate shock wave and excess pressure momentum near the body is proposed. This method allows the length of the reduced (by 50%) sonic boom level to be increased and the bow shock wave intensity in the far zone to be reduced by 12%. A possibility of controlling the process of formation of wave structures, such as hanging pressure shocks arising near the aircraft surface, is demonstrated. The action of the cryogenic mechanism is explained.     

Numerical and analytical modelling of entropy noise in a supersonic nozzle with a shock

Analytical and numerical assessments of the indirect noise generated through a nozzle are presented. The configuration corresponds to an experiment achieved at DLR by Bake et al. [The entropy wave generator (EWG): a reference case on entropy noise, Journal of Sound and Vibration 326 (2009) 574-598] where an entropy wave is generated upstream of a nozzle by an electrical heating device. Both 3-D and 2-D axisymmetric simulations are performed to demonstrate that the experiment is mostly driven by linear acoustic phenomena, including pressure wave reflection at the outlet and entropy-to-acoustic conversion in the accelerated regions. Moreover, the spatial inhomogeneity of the upstream entropy fluctuation has no visible effect for the investigated frequency range (0-100 Hz). Similar results are obtained with a purely analytical method based on the compact nozzle approximation of Marble and Candel [Acoustic disturbances from gas nonuniformities convected through a nozzle, Journal of Sound and Vibration 55 (1977) 225-243] demonstrating that the DLR results can be reproduced simply on the basis of a low-frequency compact-elements approximation. Like in the present simulations, the analytical method shows that the acoustic impedance downstream of the nozzle must be accounted for to properly recover the experimental pressure signal. The analytical method can also be used to optimize the experimental parameters and avoid the interaction between transmitted and reflected waves.     

Characteristics of a magnetogasdynamic diffuser under different modes of electric current switching

This paper elaborates upon a previous investigation into the influence of external electric and magnetic fields on a flow through a supersonic diffuser. The aim of the present study is to correlate a change in the configuration of a shock wave emerging near the diffuser inlet at magnetohydrodynamic interaction with the amount of force and energy actions and with total pressure losses. For this purpose, the main parameters of the shock wave structure and the total pressure are measured at the diffuser outlet when the flow is subjected to magnetic and electric fields of various strengths at different routes of current passage. In the experiments, a shock tube with a supersonic nozzle is employed. The shock tube forms a flow behind the shock wave reflecting from the end of the tube, which terminates in the nozzle. The diffuser is located directly downstream of the nozzle. The investigation is carried out in xenon. The flow is subjected to external fields at the inlet of the diffuser. The shock wave structure is visualized by frame sweeping of Schlieren patterns of the flow. The total pressure is measured with a piezoelectric transducer located at the end of the channel. The results obtained make it possible to optimize the action on the flow in terms of power consumption and total pressure losses for a given design of the diffuser.     

用图像处理方法检测人工心瓣开口面积

人工心脏瓣膜投入临床应用前必须经过体外血流动力学性能检测和评价 ,心瓣的开口面积是重要指标之一。介绍的方法是利用计算机控制血液循环系统模拟装置的运动 ,实时采集心瓣开闭过程的图像 ,同时检测流经心瓣的血流量及跨瓣压差 ,利用图像处理方法计算出心瓣开口的实际面积 ,为分析开口面积与流量、压力的关系提供数据     

Physical investigation of acoustic waves induced by the oscillation and collapse of the single bubble

The objective of this paper is to apply both experimental and numerical methods to investigate acoustic waves induced by the oscillation and collapse of a single bubble. In the experiments, the schlieren technique is used to capture the temporal evolution of the bubble shapes, and the corresponding acoustic waves. The results are presented for the single bubble generated by a low-voltage bubble generator in the free field of water. During the numerical simulations, a three-dimensional (3D) weakly compressible model is introduced to investigate the single bubble dynamics, including the generation and propagation of acoustic waves. The results show that (1) Compression wave, rarefaction wave and shock wave are generated during expansion stage, collapse stage and rebound stage of the bubble respectively. (2) Compression waves are induced by the rapid expansion of the bubble and eventually steepen into one shock wave propagating outward in the liquid, then another strong shock wave is emitted at the final collapse stage. The velocity and pressure of the liquid field increases after the shock wave. (3) Rarefaction waves are generated during the collapse stage due to the contraction of the bubble. The rarefaction wave reduces the liquid pressure and its spatial distribution is dispersive. The pressure of these acoustic waves and their effect on the liquid velocity attenuate with the increase of propagation distance.     

微通道内气体流动的DSMC方法

基于压力边界条件开展了微尺度低速流动DSMC方法的研究, 定义了两个无量纲参数作为微尺度DSMC方法下网格尺寸与时间步长的约束条件, 通过微尺度Poiseuille流进行了方法的验证与比较, 获得了网格尺寸与时间步长的一般原则。在此基础上, 对变截面的单孔和双孔模型的微通道气体流动进行DSMC模拟, 结果表明, 通道几何形状对微尺度气体流动具有显著影响, 孔口后由于通道收缩, 产生压降, 导致气流加速, 并在孔口下游拐角处发生分离; 双孔口模型的流动结构与单孔口模型相似, 且在相同压差情况下, 经双孔口后的气体流速低于经单孔口后的气体流速; 随着入口压力的增加, 经过孔口压缩后的速度越大, 分离区尺寸也越大。      

Flow characteristics and micro-scale metallic particle formation in the laser supersonic heating technique

The characteristics of the supersonic flow of the laser heating technique for producing micro-scale metallic particles were investigated in this study. A numerical model was established to predict the flow fields and particle trajectories leaving a spray nozzle with shock wave effects. The compressible flow of the shock waves and the trajectories of particles in diameters of 1–20 μm were simulated and compared with the flow visualization. In the experiment, a pulsed Nd-YAG laser was used as heat source on a carbon steel target within the nozzle, and the carbon steel particles were ejected by high-pressure air. The result shows that the shock wave structures were generated at various entrance pressures, and there is a significant increase in the amount of carbon steel particles and the spraying angles by increasing the entrance air pressure.     

环流问题与双小孔型脉冲管制冷机研究

１前言脉冲管制冷机已基本达到了实用化的程度。但在理论方面,仍有较多问题存在,其中双向进气型脉冲管制冷机内的环流问题成为一个讨论的热点和难点。１９９１年朱绍伟进行双向进气方案的实验验证时［１］,已经提到了环流问题,即进出双向阀门的流量不等造成的冷端温度...     

高超声速层流绕三维压缩拐角的数值模拟

通过数值模拟研究了高超声速来流绕过压缩拐角的层流分离三维流动特性.数值方法采用三维N-S方程,结合2阶精度Roe格式以及分区结构网格有限体积法进行离散.数值模拟的空间激波结构与实验纹影结果符合较好;激波/边界层干扰区内3条纵向线上的计算压力分布与实验结果进行了对比分析,计算获得在三维楔侧面存在低压力区,与实验结果反映的规律一致,计算结果表明低压力区是由楔体侧缘尖端发起的二次涡的抽吸作用造成的.此外,在楔体后端尾流区的低压沿边界层内的亚声速区往上游传递了一定距离.      

Experimental study of the cavitation noise and vibration induced by the choked flow in a Venturi reactor

In this paper, the cavitation performance and corresponding pressure pulsation, noise and vibration induced by the choked cavitating flow in a Venturi reactor are investigated experimentally under different cavitation conditions by using high-speed camera and high frequency sensors. Based on the instantaneous continuous cavitation images, the Proper Orthogonal Decomposition (POD), a tool to analyze the large-scale cavitation flow structure, is applied to investigate the choked cavitating flow dynamics. The POD results show that two mechanisms, re-entrant jet flow mechanism and shock wave mechanism, govern the shedding and collapse of cavitation cloud at different pressure ratios. These mechanisms contribute to the variation of pressure pulsation, noise and vibration at different pressure ratios. The pressure pulsation spectrum behaves differently in various cavitation regions induced by the choked cavitating flow. Due to the existence of low pressure in re-entrant region, the influence of high frequency fluctuation on pressure pulsation caused by re-entrant flow is small. Moreover, with the increase of pressure ratio, the induced noise and vibration intensity decreases gradually, then increases and reaches a maximum value. Finally, it drops to a low and stable level. Despite different inlet pressures, the intensity of cavitation noise and vibration reaches the maximum value at the same pressure ratio. Specifically, the FFT analysis of noise and vibration signals indicates that low frequency component prevails at small pressure ratio owing to the re-entrant jet mechanism, while high frequency component prevails at large pressure ratio owing to the shock wave mechanism. The relationship between the choked cavitation dynamics and the induced pressure pulsation, noise and vibration in the Venturi reactor is highlighted. The results can provide guidance for the optimal operation condition of the Venturi reactor for cavitation applications such as water treatment.     

激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。     

Sonochemical reaction with microbubbles generated by hollow ultrasonic horn

A microbubble generator with a cylindrical hollow ultrasonic horn (HUSH), gas flow path, and an orifice inside it can produce high ultrasonic pressure around the generated microbubbles. We used this microbubble generator with a HUSH as a sonochemical reactor for the degradation of indigo carmine and evaluated the sonochemical reaction by simply inserting the horn end into a liquid. The experimental results revealed that the ultrasonic irradiation around ultrasonically generated microbubbles effectively degraded indigo carmine in water. In addition, degradation experiments performed by varying the ultrasonic power and gas flow rates indicated that a continuous gas supply and ultrasonic pressure were required for generating the microbubbles, without the generation of millimeter-scale bubbles, to enhance the sonochemical reaction in water.