Mechanism of the alternating copolymerization of epoxides and CO2 using beta-diiminate zinc catalysts: evidence for a bimetallic epoxide enchainment

A series of zinc beta-diiminate (BDI) complexes and their solid-state structures, solution dynamics, and copolymerization behavior with CO(2) and cyclohexene oxide (CHO) are reported. Stoichiometric reactions of the copolymerization initiation steps show that zinc alkoxide and bis(trimethylsilyl)amido complexes insert CO(2), whereas zinc acetates react with CHO. [(BDI-2)ZnOMe](2) [(BDI-2) = 2-((2,6-diethylphenyl)amido)-4-((2,6-diethylphenyl)imino)-2-pentene] and (BDI-1)ZnO(i)Pr [(BDI-1) = 2-((2,6-diisopropylphenyl)amido)-4-((2,6-diisopropylphenyl)imino)-2-pentene] react with CO(2) to form [(BDI-2)Zn(mu-OMe)(mu,eta(2)-O(2)COMe)Zn(BDI-2)] and [(BDI-1)Zn(mu,eta(2)-O(2)CO(i)Pr)](2), respectively. (BDI-2)ZnN(SiMe(3))(2) inserts CO(2) and eliminates trimethylsilyl isocyanate to give [(BDI-2)Zn(mu-OSiMe(3))](2). [(BDI-7)Zn(mu-OAc)](2) [(BDI-7) = 3-cyano-2-((2,6-diethylphenyl)amido)-4-((2,6-diethylphenyl)imino)-2-pentene] reacts with 1.0 equiv of CHO to yield [(BDI-7)Zn(mu,eta(2)-OAc)(mu,eta(1)-OCyOAc)Zn(BDI-7)]. Under typical polymerization conditions, rate studies on the copolymerization exhibit no dependence in [CO(2)], a first-order dependence in [CHO], and orders in [Zn](tot) ranging from 1.0 to 1.8 for [(BDI)ZnOAc] complexes. The copolymerizations of CHO (1.98 M in toluene) and 300 psi CO(2) at 50 degrees C using [(BDI-1)ZnOAc] and [(BDI-2)ZnOAc] show orders in [Zn](tot) of 1.73 +/- 0.06 and 1.02 +/- 0.03, respectively. We propose that two zinc complexes are involved in the transition state of the epoxide ring-opening event.     

Formation of cyclodimeric (sp(2)-C(1))-bridged Cp/-oxido ("CpC(1)O"M(IV)X(2)) group 4 metal Ziegler-Natta catalyst systems--how important is the "constrained geometry" effect?

Deprotonation of sodium acetylcyclopentadienide (11) was achieved by treatment with LDA in THF to generate the dianion equivalent [Cp-C(=CH(2))-O](2-)(12). Transmetalation with Cl(2)Ti(NMe(2))(2) gave ([Cp-C(=CH(2))-O]Ti(NMe(2))(2))(2) (17); treatment of 12 with Cl(2)Zr(NEt(2))(2)(THF)(2) furnished (([Cp-C(=CH(2))-O]Zr(NEt(2))(2))(2) (18). Cryoscopy in benzene revealed a dimeric structure of 18 in solution. Complex 18 was characterized further by an X-ray crystal structure analysis and by DFT calculations. The two zirconium centers of 18 are connected by means of two symmetry-equivalent eta(5):kappaO[Cp-C(=CH(2))-O] ligands. The ligand backbone shows no specific steric constraints, different from the formally related "constrained geometry" systems such as [Cp-SiMe(2)-NCMe(3)]Zr(NMe(2))(2) (1b). Nevertheless, upon treatment with MAO the CpCO group 4 metal complex system (18) generates an active homogeneous Ziegler-Natta catalyst for effective ethene/1-octene copolymerization, with up to 20% 1-octene having become incorporated in the resulting copolymer at 90 degrees C.     

Zinc(II) ortho-hydroxyphenylhydrazo-β-diketonate complexes and their catalytic ability towards diastereoselective nitroaldol (Henry) reaction

The zinc(II) complexes with ortho-hydroxy substituted arylhydrazo-β-diketonates [Zn(2)(CH(3)OH)(2)(μ-L(1))(2)] (5), [Zn{(CH(3))(2)SO}(H(2)O)(L(2))] (6), [Zn(2)(H(2)O)(2)(μ-L(3))(2)] (7) and [Zn(H(2)O)(2)(L(4))]·H(2)O (8) were synthesized by reaction of a zinc(II) salt with the appropriate hydrazo-β-diketone, HO-2-C(6)H(4)-NHN=C{C(=O)CH(3)}(2) (H(2)L(1), 1), HO-2-O(2)N-4-C(6)H(3)-NHN=C{C(=O)CH(3)}(2) (H(2)L(2), 2), HO-2-C(6)H(4)-NHN=CC(=O)CH(2)C(CH(3))(2)CH(2)C(=O) (H(2)L(3), 3) or HO-2-O(2)N-4-C(6)H(3)-NHN=[CC(=O)CH(2)C(CH(3))(2)CH(2)C(=O) (H(2)L(4), 4). They were fully characterized, namely by X-ray diffraction analysis that disclosed the formation of extensive H-bonds leading to 1D chains (5 and 6), 2D layers (7) or 3D networks (8). The thermodynamic parameters of the Zn(II) reaction with H(2)L(2) in solution, as well as of the thermal decomposition of 1-8 were determined. Complexes 5-8 act as diastereoselective catalysts for the nitroaldol (Henry) reaction. The threo/erythro diastereoselectivity of the β-nitroalkanol products ranges from 8:1 to 1:10 with typical yields of 80-99%, depending on the catalyst and substrate used.     

A 1D Schiff base zinc polymer as a versatile metallo-ligand for the synthesis of polynuclear zinc cages

The 1D polymeric Schiff base zinc complex, [LZn(2)Et(2)](n), where LH(2) = (NN'-ethylene-bis(4-iminopentan-2-one)) has been demonstrated as a useful synthetic metallo building block for the synthesis of homo and heteronuclear zinc cages. The reaction of [LZn(2)Et(2)](n) with CdI(2) afforded the hetero-nuclear cage, 1, [L(2)Zn(4)(Et)(2)CdI(4)], while reaction with HgI(2) afforded a hexanuclear zinc cage, [L(2)Zn(6)(Et)(4)(μ(4)O)(μ(3)OEt)I], 2. The versatility of [LZn(2)Et(2)](n) as a metallo building block is demonstrated through the reaction with ferrocenyl carboxylic acid, affording the ferrocenyl supported zinc cage, [L(2)Zn(8)(FcCO(2))(4)(Et)(2)(OEt)(2)(μ(4)O)(2)], 3, while the reaction with Er(III) acetate afforded the decanuclear zinc cage, [L(3)Zn(10)(μ(4)O)(4)(Et)(6)], 4.     

Phosphonate- and ester-substituted 2-cyanoethylene-1,1-dithiolate clusters of zinc: aerial CO2 fixation and unusual binding patterns

Treatment of [Zn(tmeda)Cl2] (tmeda = N, N, N', N'-tetramethylethylenediamine) with a phosphonate-substituted 2-cyanoethylene-1,1-dithiolato ligand in air yields a tetranuclear zinc-carbonate complex 1 having the formula of [Zn4(tmeda)3(mu3-CO3){S2CC(CN)P(O)(OEt)2}3] in which four zinc atoms form a trigonal pyramid with the apical zinc atom in a hitherto unknown S3O3 coordination sphere. It is the first example of aerial CO2 fixation to afford a metal-carbonato compound incorporating 1,1-ethenedithiolate ligands. In sharp contrast, reaction with an isobutyl ester-substituted 2-cyanoethylene-1,1-dithiolate forms a trimeric zinc complex [Zn(tmeda){S2CC(CN)(CO2(i)Bu)}]3, 2, which does not contain the metal-bound carbonate. Compound 2 is the first example of a trinuclear zinc complex composed of four-, five-, and six-coordinated Zn atoms. The unsymmetrical ligand orientation around three zinc centers in 2 suggests that the other structural isomer, which would have an idealized C3 axis, may exist. The reaction of the ethyl ester derivative of 2-cyanoethylene-1,1-dithiolate with [Zn(tmeda)Cl2] affords [{Zn(tmeda)Cl}2{S2CC(CN)(CO2Et)}], 3. The ester-functionalized 1,1-dithiolate ligands in compounds 2 and 3 display a bimetallic, triconnective coordination mode, which is rare for these types of ligands. Some probable intermediates generated from the formation of compound 1 have also been proposed.     

Synthetic and structural studies on new diiron azadithiolate (ADT)-type model compounds for active site of [FeFe]hydrogenases

A series of new diiron azadithiolate (ADT) complexes (1-8), which could be regarded as the active site models of [FeFe]hydrogenases, have been synthesized starting from parent complex [(μ-SCH(2))(2)NCH(2)CH(2)OH]Fe(2)(CO)(6) (A). Treatment of A with ethyl malonyl chloride or malonyl dichloride in the presence of pyridine afforded the malonyl-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(6) (1) and [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (2). Further treatment of 1 and 2 with PPh(3) under different conditions produced the PPh(3)-substituted complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (3), [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(4)(PPh(3))(2) (4), and [Fe(2)(CO)(5)(PPh(3))(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (5). More interestingly, complexes 1-3 could react with C(60) in the presence of CBr(4) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) via Bingel-Hirsch reaction to give the C(60)-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(6) (6), [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)C(C(60)) (7), and [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (8). The new ADT-type models 1-8 were characterized by elemental analysis and spectroscopy, whereas 2-4 were further studied by X-ray crystallography and 6-8 investigated in detail by DFT methods.     

Synthesis, characterization, and structural studies of multimetallic ferrocenyl carbene complexes of group VII transition metals

Fischer carbene complexes of the group VII transition metals (Mn and Re) containing at least two or three different transition metal substituents, all in electronic contact with the carbene carbon atom, were synthesized. The structural features and their relevance to bonding in the carbene multimetal compounds were investigated, as they represent indicators of possible reactivity sites in polymetallic carbene assemblies. For complexes of the type [ML(x){C(OR)R'}] (ML(x) = MnCp(CO)(2) or Re(2)(CO)(9)), ferrocenyl (Fc) was chosen as the R' substituent, while the OR substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1a (ML(x) = MnCp(CO)(2), R = Et, R' = Fc), 2a (ML(x) = MnCp(CO)(2), R = TiCp(2)Cl, R' = Fc), 3a (ML(x) = Re(2)(CO)(9), R = Et, R' = Fc), and 4a (ML(x) = Re(2)(CO)(9), R = TiCp(2)Cl, R' = Fc). Direct lithiation of the ferrocene with n-BuLi/TMEDA at elevated temperatures, followed by the Fischer method of carbene preparation, resulted in formation of the novel biscarbene complexes with bridging ferrocen-1,1'-diyl (Fc') substituents [{π-Fe(C(5)H(4))(2)-C,C'}{C(OEt)ML(x)}(2)] (1b, ML(x) = MnCp(CO)(2); 3b, ML(x) = Re(2)(CO)(9)) or the unusual bimetallacyclic bridged biscarbene complexes [{π-TiCp(2)O(2)-O,O'}{π-Fe(C(5)H(4))(2)-C,C'}{CML(x)}(2)] (2b, ML(x) = MnCp(CO)(2); 4b, ML(x) = Re(2)(CO)(9)). The target compounds that were isolated displayed a variety of different geometric isomers and conformations. The greater reactivity of the binary dirhenium acylates in solution, compared to that of the cyclopentadienyl manganese acylate, resulted in a complex reaction mixture. Although the stabilization of hydroxycarbene or hydrido-acyl intermediates of dirhenium carbonyls could not be achieved, their existence in solution was confirmed by the isolation of [(π-H)(2)-(Re(CO)(4){C(O)Fc})(2)] (8), the unique dichloro-bridged biscarbene complex fac-[(π-Cl)(2)-(Re(CO)(3){C(OEt)Fc})(2)] (6), the known hydrido complex [Re(3)(CO)(14)H] (5), the acyl complex [Re(CO)(5){C(O)Fc}] (7), and the aldehyde-functionalized eq-[Re(2)(CO)(9){C(OTiCp(2)Cl)(Fc'CHO)}] (9).     

Synthesis and structural characterization of novel tetranuclear organotitanoxane derivatives

Synthesis of the novel titanoxane compounds, [(TiCl)(TiOH){(Ti)[μ-(η(5)-C(5)Me(4)SiMe(2)O-κO)](2)(μ-O)}(2)(μ-O)] (4) and [{Ti[μ-(η(5)-C(5)Me(4)SiMe(2)O-κO)](μ-O)}(4)] (5) by controlled reaction of the dinuclear titanium oxo complex [{Ti{μ-(η(5)-C(5)Me(4)SiMe(2)O-κO)}Cl](2)(μ-O)] (1) with 2 equiv of LiOH is reported. Complex 4 is innovative and remarkable. It is one of the rare known examples of tetranuclear stable terminal hydroxo titanium complexes, with an open-chained structure, which coincides with the transient metal monohydroxo proposed in the stepwise pathway employed to justify the formation of the hexanuclear complex [{Ti[μ-(η(5)-C(5)Me(4)SiMe(2)O-κO)](μ-O)}(6)] (3) from 1. (1)H DOSY experiments were used to characterize complex 4. In addition, the structures of compound 5 and of precursor 1 were determined by single-crystal X-ray diffraction studies.     

Organometallic Gold(Ⅲ)Derivatives with Anionic Oxygen Ligands-mononuclear Hydroxo,Alkoxo,and Acetato Complexes:Synthesis and Spectral Study

A variety of gold(Ⅲ) adducts having a-ligated oxygen-donor ligands have been prepared from [Au(ppy)Cl2](ppy·phenylpyridine)(1) either by partial or total replacement of the chloride ions.The new species comprise hydroxo-[Au(ppy)(OH)Cl](2),and[Au(ppy)(OH)2](3),oxo-[Au2(ppy)2(μ-O)2](4),acetate-[Au(ppy)(O2CMe2)] (5),and alkoxo complexes-[Au(ppy)(OR)Cl](6,7)and[Au(ppy)(OR)2](8-10)(R=Me,6 and 8;Et,7 and 9;Pri,10).The dihydroxo and the OXO complexes Can be interconverted by refluxing the former in anhydrous THF and the latter in water.The hydroxides 2 and 3 and the acetato complex 5 undergo σ-ligand metathesis in ROH solution(R=Me,Et or Pri) to give the corresponding alkoxides.     

Reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with Alkyl Halides and Dihalides: Formation of the Alkyl- and the Dialkylantimony-Iron Carbonyl Complexes

The reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] (1) with RX (R = Me, Et, n-Pr; X = I) in MeCN form the monoalkylated antimony complexes [Et(4)N](2)[RSb{Fe(CO)(4)}(3)] (R = Me, 2; R = Et, 4; R = n-Pr, 6) and the dialkylated antimony clusters [Et(4)N][R(2)Sb{Fe(CO)(4)}(2)] (R = Me, 3; R = Et, 5; R = n-Pr, 7), respectively. When [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] reacts with i-PrI, only the monoalkylated antimony complex [Et(4)N](2)[i-PrSb{Fe(CO)(4)}(3)] (8) is obtained. The mixed dialkylantimony complex [Et(4)N][MeEtSb{Fe(CO)(4)}(2)] (9) also can be synthesized from the reaction of 2 with EtI. While the reaction with Br(CH(2))(2)Br produces [Et(4)N](2)[BrSb{Fe(CO)(4)}(3)] (10), treatment with Cl(CH(2))(3)Br forms the monoalkylated product [Et(4)N](2)[Cl(CH(2))(3)Sb{Fe(CO)(4)}(3)] (11) and a dialkylated novel antimony-iron complex [Et(4)N][{&mgr;-(CH(2))(3)}Sb{Fe(CO)(4)}(3)] (12). On the other hand, the reaction with Br(CH(2))(4)Br forms the monoalkylated antimony product and the dialkylated antimony complex [Et(4)N][{&mgr;-(CH(2))(4)}Sb{Fe(CO)(4)}(2)] (13). Complexes 2-13 are characterized by spectroscopic methods or/and X-ray analyses. On the basis of these analyses, the core of the monoalkyl clusters consists of a central antimony atom tetrahedrally bonded to one alkyl group and three Fe(CO)(4) fragments and the dialkyl products are structurally similar to the monoalkyl clusters, with the central antimony bonded to two alkyl groups and two Fe(CO)(4) moieties in each case. The dialkyl complex 3 crystallizes in the monoclinic space group P2(1)/c with a = 13.014(8) ?, b = 11.527(8) ?, c = 17.085(5) ?, beta = 105.04(3) degrees, V = 2475(2) ?(3), and Z = 4. Crystals of 12 are orthorhombic, of space group Pbca, with a = 14.791(4) ?, b = 15.555(4) ?, c = 27.118(8) ?, V = 6239(3) ?(3), and Z = 8. The anion of cluster 12 exhibits a central antimony atom bonded to three Fe(CO)(4) fragments with a -(CH(2))(3)- group bridging between the Sb atom and one Fe(CO)(4) fragment. This paper discusses the details of the reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with a series of alkyl halides and dihalides. These reactions basically proceed via a novel double-alkylation pathway, and this facile methodology can as well provide a convenient route to a series of alkylated antimony-iron carbonyl clusters.     

Synthesis and characterization of novel oxo-centered phosphanylzincates of potassium and cesium with a central Zn6O2P4 double-heterocubane cage

The hydrolysis reaction of K(2)(MeZn)(2)(PSitBu(3))(2) in THF/toluene solution yields the [(MeZn)(4)Zn(2)(mu(3)-PSitBu(3))(4)(mu(4)-O)(2)](4-) anions independent of the applied stoichiometry. If the applied molar ratio resembles the composition of the anion, [(thf)K](2)[(eta(6)-toluene)K](2)[(MeZn)(4)Zn(2)(mu(3)-PSitBu(3))(4)(mu(4)-O)(2)] (1) crystallizes from a mixture of THF and toluene. In the case with less water, a phosphanediylzincate moiety is bonded to this anion, and [Zn(PSitBu(3))(2)K(4)(thf)(6)](2)[(MeZn)(4)Zn(2)(mu(3)-PSitBu(3))(4)(mu(4)-O)(2)] (2) crystallizes. However, again the major product is 1. The same anion is also observed with larger and softer cations, and [(thf)(3)Cs(2)](2)[(MeZn)(4)Zn(2)(mu(3)-PSitBu(3))(4)(mu(4)-O)(2)] (3) is obtained if the cesium zincate is used in this reaction. In all of these compounds, the anion is a slightly distorted Zn(6)O(2)P(4) double-heterocubane cage with a central Zn(2)O(2) ring having Zn-O bond lengths of approximately 207 pm.     

Synthesis and Crystal Structure of a New One-dimensional Double Helical-chain Polymer, {Zn（O2CC12H8CO2）（H2O）}n

1 INTRODUCTION Pronounced interest has been put in the field of coordination polymeric complexes owing to their fas- cinating molecular topologies[1～3] along with poten- tial applications as functional materials[4～6]. In par- ticular, complexes with helical structures attract much attention of scientists[7, 8] mainly due to their simi- larity to the structure of DNA molecule. To obtain new complexes, solv- and hydrothermal routes are currently used. In this way, the organic ligand act…     

Single-site beta-diiminate zinc catalysts for the alternating copolymerization of CO2 and epoxides: catalyst synthesis and unprecedented polymerization activity

Synthetic routes to zinc beta-diiminate complexes are reported. The synthesis of 11 beta-diimine [(BDI)-H] ligands, with varying N-aryl substituents and bridging structures, is described. These ligands are converted to (BDI)ZnX complexes (X = OAc, Et, N(SiMe3)2, Br, Cl, OH, OMe, O(i)Pr). X-ray structural data revealed that all zinc complexes examined exist as micro-X-bridged dimers in the solid state, with the exception of the zinc ethyl and amido complexes which were monomeric. Complexes of the form (BDI)ZnOR (R = alkyl, acyl) and (BDI)ZnN(SiMe3)2 are highly active catalysts for the alternating copolymerization of epoxides and CO2. Copolymerizations of cyclohexene oxide (CHO) and CO2 with (BDI-1)ZnX [(BDI-1) = 2-((2,6-diisopropylphenyl)amido)-4-((2,6-diisopropylphenyl)imino)-2-pentene)] and (BDI-2)ZnX [(BDI-2) = 2-((2,6-diethylphenyl)amido)-4-((2,6-diethylphenyl)imino)-2-pentene)], where X = OAc, Et, N(SiMe3)2, Br, Cl, OH, OMe, O(i)Pr, were attempted at 50 degrees C and 100 psi CO2. Complexes with X = OAc, N(SiMe3)2, OMe, O(i)Pr all produced polycarbonate by the alternated insertion of CHO and CO2 with similar catalytic activities, comparable molecular weights, and narrow molecular weight distributions (MWD approximately 1.1), indicating the copolymerizations are living. Furthermore, ligand effects were shown to dramatically influence the polymerization activity as minor steric changes accelerated or terminated the polymerization activity.     

C-C coupling reactions in the coordination sphere of rhodium(I) and rhodium(III): New routes for the di- and trimerization of terminal alkynes

The alkynyl(vinylidene)rhodium(I) complexes trans-[Rh(C[triple bond, length as m-dash]CR)(=C=CHR)(PiPr3)2] 2, 5, 6 react with CO by migratory insertion to give stereoselectively the butenynyl compounds trans-[Rh{eta1-(Z)-C(=CHR)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-7-9, of which (Z)-7 (R=Ph) and (Z)-8 (R=tBu) rearrange upon heating or UV irradiation to the (E) isomers. Similarly, trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CPh}(CO)(PiPr3)2] 12 and trans-[Rh{eta1-(Z)-C(=CHCO2Me)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-15, (Z)-16 have been prepared. At room temperature, the corresponding "non-substituted" derivative trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CH}(CO)(PiPr3)2] 18 is in equilibrium with the butatrienyl isomer trans-[Rh(eta1-CH=]C=C=CH2)(CO)(PiPr3)2] 19 that rearranges photochemically to the alkynyl complex trans-[Rh(C[triple bond, length as m-dash]CCH=CH2)(CO)(PiPr3)2] 20. Reactions of (Z)-7, (E)-7, (Z)-8 and (E)-8 with carboxylic acids R'CO2H (R'=CH3, CF3) yield either the butenyne (Z)- and/or (E)-RC[triple bond, length as m-dash]CCH=CHR or a mixture of the butenyne and the isomeric butatriene, the ratio of which depends on both R and R'. Treatment of 2 (R=Ph) with HCl at -40 degrees C affords five-coordinate [RhCl(C[triple bond, length as m-dash]CPh){(Z)-CH=CHPh}(PiPr3)2] 23, which at room temperature reacts by C-C coupling to give trans-[RhCl{eta2-(Z)-PhC[triple bond, length as m-dash]CCH=CHPh}(PiPr3)2](Z)-21. The related compound trans-[RhCl(eta2-HC[triple bond, length as m-dash]CCH=CH2)(PiPr3)2] 27, prepared from trans-[Rh(C[triple bond, length as m-dash]CH)(=C=CH2)(PiPr3)2] 17 and HCl, rearranges to the vinylvinylidene isomer trans-[RhCl(=C=CHCH=CH2)(PiPr3)2] 28. While stepwise reaction of 2with CF3CO2H yields, via alkynyl(vinyl)rhodium(III) intermediates (Z)-29 and (E)-29, the alkyne complexes trans-[Rh(kappa1-O2CCF3)(eta2-PhC[triple bond, length as m-dash]CCH=CHPh)(PiPr3)2](Z)-30 and (E)-30, from 2 and CH3CO2H the acetato derivative [Rh(kappa2-O2CCH3)(PiPr3)2] 33 and (Z)-PhC[triple bond, length as m-dash]CCH=]CHPh are obtained. From 6 (R=CO2Me) and HCl or HC[triple bond, length as m-dash]CCO2Me the chelate complexes [RhX(C[triple bond, length as m-dash]CCO2Me){kappa2(C,O)-CH=CHC(OMe)=O}(PiPr3)2] 34 (X=Cl) and 35 (X=C[triple bond, length as m-dash]CCO2Me) have been prepared. In contrast to the reactions of [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE)(CH=CHE)(PiPr3)2] 37(E=CO2Me) with chloride sources which give, via intramolecular C-C coupling, four-coordinate trans-[RhCl{eta2-(E)-EC[triple bond, length as m-dash]CCH=CHE}(PiPr3)2](E)-36, treatment of 37with HC[triple bond, length as m-dash]CE affords, via insertion of the alkyne into the rhodium-vinyl bond, six-coordinate [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE){eta1-(E,E)-C(=CHE)CH=CHE}(PiPr3)2] 38. The latter reacts with MgCl2 to yield trans-[RhCl{eta2-(E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE}(PiPr3)2] 39, which, in the presence of CO, generates the substituted hexadienyne (E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE 40.     

Synthesis and structural characterization of some new porphyrin-fullerene dyads and their application in photoinduced H2 evolution

The [3 + 2] cycloaddition reaction of C(60) with ethyl isonicotinoylacetate in the presence of piperidine in PhCl at room temperature or in the presence of Mn(OAc)(3) in refluxing PhCl gave the pyridyl-containing dihydrofuran-fused C(60) derivative (4-C(5)H(4)N)C(O)═C(C(60))CO(2)Et (1), whereas the phenyl-containing C(60) derivative PhC(O)═C(C(60))CO(2)Et (2) was similarly prepared by [3 + 2] cycloaddition reaction of C(60) with ethyl benzoylacetate in the presence of piperidine or Mn(OAc)(3). More interestingly, one of the new porphyrin-fullerene dyads, i.e., [4-C(5)H(4)NC(O)═C(C(60))CO(2)Et]·ZnTPPH (3, ZnTPPH = tetraphenylporphyrinozinc), could be prepared by coordination reaction of the pyridyl-containing C(60) derivative 1 with equimolar ZnTPPH in CS(2)/hexane at room temperature. In addition, the β-keto ester-substituted porphyrin derivative H(2)TPPC(O)CH(2)CO(2)Et (4) was prepared by a sequential reaction of HO(2)CCH(2)CO(2)Et with n-BuLi in 1:2 molar ratio followed by treatment with H(2)TPPC(O)Cl in the presence of Et(3)N and then hydrolysis with diluted HCl, whereas the porphyrinozinc derivative ZnTPPC(O)CH(2)CO(2)Et (5) could be prepared by coordination reaction of 4 with Zn(OAc)(2) in refluxing CHCl(3)/MeOH. Particularly interesting is that the second new porphyrin-fullerene dyad H(2)TPPC(O)═C(C(60))CO(2)Et (6) could be prepared by [3 + 2] cycloaddition reaction of 4 with C(60) in the presence of piperidine in PhCl at room temperature. In addition, treatment of 6 with Zn(OAc)(2) in refluxing CHCl(3)/MeOH afforded the third new dyad ZnTPPC(O)═C(C(60))CO(2)Et (7). All the new compounds 1-7 were characterized by elemental analysis and various spectroscopic methods and particularly for 2, 3, and 5 by X-ray crystallography. The five-component system consisting of an electron donor EDTA, dyad 3, an electron mediator methylviologen (MV(2+)), the catalyst colloidal Pt, and a proton source HOAc was proved to be effective for photoinduced H(2) evolution. A possible pathway for such a type of H(2) evolution was proposed.     

Oxozinc carboxylates: a predesigned platform for modelling prototypical Zn-MOFs' reactivity toward water and donor solvents

Two unique adducts of an oxozinc carboxylate cluster with H(2)O and THF were isolated and structurally characterized, [Zn(4)(μ(4)-O)(O(2)CR)(6)(H(2)O)(THF)]·2(THF) and [Zn(4)(μ(4)-O)(O(2)CR')(6)(THF)(3)] (where R = benzoate and R' = 9-antracenecarboxylate anion). The study shows that the zinc centers of the Zn(4)O core can easily form unique coordination environments without breaking of the Zn-O(carboxylate) bonds.     

Porous double-walled metal triazolate framework based upon a bifunctional ligand and a pentanuclear zinc cluster exhibiting selective CO2 uptake

The self-assembly of a custom-designed bifunctional ligand featuring both 1,2,3-triazolate and carboxylate donor groups with a pentanuclear zinc cluster generated in situ affords a double-walled metal triazolate framework (MTAF) material, MTAF-1 (Zn(5)(μ(3)-O)(2)(C(9)N(3)H(5)O(2))(5)(H(+))(4)(H(2)O)(17)(C(3)H(7)NO)(10)), which exhibits a surface area of 2300 m(2)/g and demonstrates interesting selective CO(2) uptake performances.     

Diverse modes of reactivity of dialkyl azodicarboxylates with P(III) compounds: synthesis, structure, and reactivity of products other than the Morrison-Brunn-Huisgen intermediate in a Mitsunobu-type reaction

The reactivity of diethyl azodicarboxylate (DEAD)/diisopropyl azodicarboxylate (DIAD) with P(III) compounds bearing oxygen or nitrogen substituents is explored. Compounds with structures quite different from that of Morrison-Brunn-Huisgen intermediate R'(3)P(+)N(CO(2)R)N(-)(CO(2)R) (1), observed in the Mitsunobu reaction, have been established by using X-ray crystallography and NMR spectroscopy. Thus reactions with X(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NH-t-Bu [X = S (8), CH(2) (9)] or XP(mu-N-t-Bu)(2)P-NH-t-Bu [X = Cl (14) or NH-t-Bu (15)] and DEAD/DIAD lead to phosphinimine-carbamate-type of products X[6-t-Bu-4-Me-C(6)H(2)O](2)P[N-t-Bu][N(CO(2)R)NH(CO(2)R)] [X = S, R = Et (16); X = CH(2), R = Et (17); X = CH(2), R = i-Pr (18)] or XP(mu-N-t-Bu)(2)P(N-t-Bu)[N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr) [X = Cl (19), NH-t-Bu (20)]. Treatment of 19 with 2,2,2-trifluoroethanol afforded the product [(CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu)[N(CO(2)-i-Pr)(HNCO(2)-i-Pr)]][Cl(-)] (21) whose structure is close to one of the intermediates proposed in the Mitsunobu reaction. The isocyanate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NCO (10) underwent 1,3-(P,C) cycloaddition with DEAD/DIAD to lead to CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P[N(CO(2)R)N(CO(2)R)-C(O)-N] [R = Et (22), i-Pr (23)]. Reaction of 22-23 with 1,1'-bi-2-naphthol or catechol leads to novel tetracoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(2,2'-OC(10)H(6)-C(10)H(6)-OH)[NC(O)-(CO(2)R)NH(CO(2)R)] [R = Et (24), i-Pr (25)] or pentacoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(1,2-O(2)C(6)H(4))[NHC(O)-N(CO(2)R)NH(CO(2)R)] [R = Et (26), i-Pr (27)] compounds in which the original NCO residue is retained; this mode of reactivity is quite different from that observed for the MBH betaine 1. In 27, the nitrogen, rather than the oxygen, occupies an apical position of the trigonal bipyramidal phosphorus violating the commonly assumed preference rules for apicophilicity. It is shown that the previously reported azide derivative 3, obtained from the reaction of 11 with DIAD, undergoes a Curtius-type rearrangement to lead to the fused cyclodiphosphazane [(CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2))P(OC(O-i-Pr)NN(CO(2)-i-Pr)N)](2) (28); this compound is in equilibrium with its monomeric form in solution at >300 K. Finally, reaction of S(6-t-Bu-4-Me-C(6)H(2)O)(2)P(OPh) (13) with DIAD gave the hexacoordinate compound S[6-t-Bu-4-Me-C(6)H(2)O](2)P(OPh)[N(CO(2)-i-Pr)NC(O-i-Pr)O] (30) with an intramolecular S-->P bond. X-ray crystallographic evidence for compounds 16, 19, 21, 22, 25, 27, 28, and 30 has been provided.     

Reactions of hydroxymesitylboranes with metal alkyls: an approach to new sterically hindered (metaloxy)mesitylboranes

Reactions of mesitylboronic acid with alkyl derivatives of aluminum R(3)Al (R = Me, Et, Bu(i)), gallium (Me(3)Ga), and zinc (Et(2)Zn) were investigated. The treatment of mesitylboronic acid, MesB(OH)(2), with trimethylgallium afforded the discrete dimer [mu-(MesB(OH)O)GaMe(2)](2) (1), which is the simple example of a O-metalated boronic acid with no hydrogen bonding in the crystal lattice. In addition, the reaction of dimesitylborinic acid, Mes(2)BOH, with diethylzinc produced the low-valent zinc compound [(mu-Mes(2)BO)ZnEt](2) (2), which was also characterized by X-ray diffraction.     

Synthesis and characterization of Nb(OR)4[OC(O)OR] (R = Me,Et, Allyl) and their reaction with the parent alcohol to afford organic carbonates

Nb(OR)(4)[OC(O)OR] (R = Me, Et, allyl) compounds have been synthesized by the reaction of dimeric alkoxo complexes [Nb(OR)(5)](2) with CO(2). The kinetics of the reaction has shown that the monomer in equilibrium with the dimer is the species that reacts with CO(2). The resulting compounds are monomeric with a eta(2)-O,O-bonded hemicarbonate group. The CO(2) uptake is reversible. The hemicarbonates react with the parent alcohol to afford the relevant organic carbonate (RO)(2)CO with a turnover number (TON) of >2.