Orientation of amide-nitrogen-15 chemical shift tensors in peptides: a quantum chemical study.

Knowledge of the orientation of the nitrogen-15 chemical shift anisotropy (CSA) tensor is critical for a variety of experiments that provide information on protein structure and dynamics in the solid and solution states. Unfortunately, the methods available for determining the orientation of the CSA tensor experimentally have inherent limitations. Rotation studies of a single crystal provide complete information but are tedious and limited in applicability. Solid-state NMR studies on powder samples can be applied to a greater range of samples but suffer from ambiguities in the results obtained. Density functional gauge-including-atomic-orbitals (GIAO) calculations of the orientations of (15)N CSA tensors in peptides are presented here as an independent source of confirmation for these studies. A comparison of the calculated (15)N CSA orientations with the available experimental values from single-crystal and powder studies shows excellent agreement after a partial, constrained optimization of some of the crystal structures used in the calculation. The results from this study suggest that the orientation as well as the magnitudes of (15)N CSA tensors may vary from molecule to molecule. The calculated alpha(N) angle varies from 0 degrees to 24 degrees with the majority in the 10 degrees to 20 degrees range and the beta(N) angle varies from 17 degrees to 24 degrees in good agreement with most of the solid-state NMR experimental results. Hydrogen bonding is shown to have negligible effect on the orientation of (15)N CSA tensor in accordance with recent theoretical predictions. Furthermore, it is demonstrated that the orientation of the (15)N CSA can be calculated accurately with much smaller basis sets than is needed to calculate the chemical shift, suggesting that the routine application of ab initio calculations to the determination of (15)N CSA tensor orientations in large biomolecules might be possible.     

Solid-state (13)C NMR chemical shift anisotropy tensors of polypeptides.

Carbon-13 chemical shift anisotropy (CSA) tensors for various carbon sites of polypeptides, and for carbon sites in alpha-helical and beta-sheet conformations of poly-L-alanine, and polyglycine, are presented. The carbonyl (13)C CSA tensors were determined from one-dimensional CPMAS spectra obtained at a slow spinning speed, whereas the CSA tensors of C(alpha) and other carbons in side chains of peptides were determined using 2D PASS experiments on powder samples. The results suggest that the spans of (13)Carbonyl CSA tensors of alanine and glycine residues in various peptides are similar, even though the magnitude of individual components of the CSA tensor and the isotropic chemical shift are different. In addition, the delta(22) element is the only component of the (13)Carbonyl CSA tensor that significantly depends on the CO.HN hydrogen-bond length. Solid-state NMR experimental results also suggest that (13)Carbonyl and (13)C(alpha) CSA tensors are similar for alpha-helical and beta-sheet conformations of poly-L-alanine, which is in agreement with the reported quantum chemical calculation studies and previous solid-state NMR experimental studies on other systems. On the other hand, the (13)C(alpha) CSA tensor of the first alanine residue is entirely different from that of the second or later alanine residues of the peptide. While no clear trends in terms of the span and the anisotropic parameter were predicted for (13)C(beta) CSA tensors of alanine, they mainly depend on the conformation and dynamics of the side chain as well as on the packing interactions in the solid state of peptides.     

Influence of N-H...O and C-H...O hydrogen bonds on the 17O NMR tensors in crystalline uracil: computational study

We report a computational study for the 17O NMR tensors (electric field gradient and chemical shielding tensors) in crystalline uracil. We found that N-H...O and C-H...O hydrogen bonds around the uracil molecule in the crystal lattice have quite different influences on the 17O NMR tensors for the two C=O groups. The computed 17O NMR tensors on O4, which is involved in two strong N-H...O hydrogen bonds, show remarkable sensitivity toward the choice of cluster model, whereas the 17O NMR tensors on O2, which is involved in two weak C-H...O hydrogen bonds, show much smaller improvement when the cluster model includes the C-H...O hydrogen bonds. Our results demonstrate that it is important to have accurate hydrogen atom positions in the molecular models used for 17O NMR tensor calculations. In the absence of low-temperature neutron diffraction data, an effective way to generate reliable hydrogen atom positions in the molecular cluster model is to employ partial geometry optimization for hydrogen atom positions using a cluster model that includes all neighboring hydrogen-bonded molecules. Using an optimized seven-molecule model (a total of 84 atoms), we were able to reproduce the experimental 17O NMR tensors to a reasonably good degree of accuracy. However, we also found that the accuracy for the calculated 17O NMR tensors at O2 is not as good as that found for the corresponding tensors at O4. In particular, at the B3LYP/6-311++G(d,p) level of theory, the individual 17O chemical shielding tensor components differ by less than 10 and 30 ppm from the experimental values for O4 and O2, respectively. For the 17O quadrupole coupling constant, the calculated values differ by 0.30 and 0.87 MHz from the experimental values for O4 and O2, respectively.     

Probing local structure in zeolite frameworks: ultrahigh-field NMR measurements and accurate first-principles calculations of zeolite 29Si magnetic shielding tensors

The principal components of zeolite 29Si magnetic shielding tensors have been accurately measured and calculated for the first time. The experiments were performed at an ultrahigh magnetic field of 21.1 T in order to observe the small anisotropies of the 29Si shielding interactions that arise for Si atoms in near-tetrahedral geometries. A robust two-dimensional (2D) chemical shift anisotropy (CSA) recoupling pulse sequence was employed that enables quasi-static powder patterns to be resolved according to the isotropic chemical shifts. For the zeolites Sigma-2 and ZSM-12, it is demonstrated that the 29Si chemical shift (CS) tensor components measured by the recoupling experiment are in excellent agreement with those determined from spinning sidebands in slow magic-angle spinning (MAS) experiments. For the zeolite ZSM-5, the principal components of the 29Si CS tensors of 15 of the 24 Si sites were measured using the 2D CSA recoupling experiment, a feat that would not be possible with a slow MAS experiment due to the complexity of the spectrum. A simple empirical relationship between the 29Si CS tensors and local structural parameters could not be established. However, the 29Si magnetic shielding tensors calculated using Hartree-Fock ab initio calculations on clusters derived from the crystal structures are in excellent agreement with the experimental results. The accuracy of the calculations is strongly dependent on the quality of the crystal structure used in the calculation, indicating that the 29Si magnetic shielding interaction is extremely sensitive to the local structure around each Si atom. It is anticipated that the measurement and calculation of 29Si shielding tensors could be incorporated into the "NMR crystallography" of zeolites and other related silicate materials, possibly being used for structure refinements that may lead to crystal structures with very accurate Si and O atomic coordinates.     

Residue-specific 13C' CSA tensor principal components for ubiquitin: correlation between tensor components and hydrogen bonding

The residue-specific 13C' CSA tensor principal components, sigma(11), sigma(22), sigma(33), and the tensor orientation defined by the rotation angles beta and gamma have been determined by solution NMR for uniformly labeled ubiquitin partially aligned in four different media. Spurious chemical shift deviations due to solvent effects were corrected with an offset calculated by linear regression of the residual dipolar couplings and chemical shifts at increasing alignment strengths. Analysis of this effect revealed no obvious correlation to solvent exposure. Data obtained in solution from a protein offer a better sampling of 13C' CSA for different amino acid types in a complex heterogeneous environment, thereby allowing for the evaluation of structural variables that would be challenging to achieve by other methods. The 13C' CSA principal components cluster about the average values previously determined, and experimental correlations observed between sigma(11), sigma(22) tensorial components and C'O...H(N) hydrogen bonding are discussed. The inverse association of sigma(11) and sigma(22) exemplify the calculated and solid-state NMR observed effect on the tensor components by hydrogen bonding. We also show that 13C' CSA tensors are sensitive to hydrogen-bond length but not hydrogen-bond angle. This differentiation was previously unavailable. Similarly, hydrogen bonding to the conjugated NH of the same peptide plane has no detectable effect. Importantly, the observed weak correlations signify the presence of confounding influences such as nearest-neighbor effects, side-chain conformation, electrostatics, and other long-range factors to the 13C' CSA tensor. These analyses hold future potential for exploration provided that more accurate data from a larger number of proteins and alignments become available.     

Multidimensional solid state NMR of anisotropic interactions in peptides and proteins

Accurate determinations of chemical shift anisotropy (CSA) tensors are valuable for NMR of biological systems. In this review we describe recent developments in CSA measurement techniques and applications, particularly in the context of peptides and proteins. These techniques include goniometeric measurements of single crystals, slow magic-angle spinning studies of powder samples, and CSA recoupling under moderate to fast MAS. Experimental CSA data can be analyzed by comparison with ab initio calculations for structure determination and refinement. This approach has particularly high potential for aliphatic (13)C analysis, especially Calpha tensors which are directly related to structure. Carbonyl and (15)N CSA tensors demonstrate a more complex dependence upon hydrogen bonding and electrostatics, in addition to conformational dependence. The improved understanding of these tensors and the ability to measure them quantitatively provide additional opportunities for structure determination, as well as insights into dynamics.     

Interaction of Cd and Zn with biologically important ligands characterized using solid-state NMR and ab initio calculations

For the first time, coordination geometry and structure of metal binding sites in biologically relevant systems are studied using chemical shift parameters obtained from solid-state NMR experiments and quantum chemical calculations. It is also the first extensive report looking at metal-imidazole interaction in the solid state. The principal values of the (113)Cd chemical shift anisotropy (CSA) tensor in crystalline cadmium histidinate and two different cadmium formates (hydrate and anhydrate) were experimentally measured to understand the effect of coordination number and geometry on (113)Cd CSA. Further, (13)C and (15)N chemical shifts have also been experimentally determined to examine the influence of cadmium on the chemical shifts of (15)N and (13)C nuclei present near the metal site in the cadmium-histidine complex. These values were then compared with the chemical shift values obtained from the isostructural bis(histidinato)zinc(II) complex as well as from the unbound histidine. The results show that the isotropic chemical shift values of the carboxyl carbons shift downfield and those of amino and imidazolic nitrogens shift upfield in the metal (Zn,Cd)-histidine complexes relative to the values of the unbound histidine sample. These shifts are in correspondence with the anticipated values based on the crystal structure. Ab initio calculations on the cadmium histidinate molecule show good agreement with the (113)Cd CSA tensors determined from solid-state NMR experiments on powder samples. (15)N chemical shifts for other model complexes, namely, zinc glycinate and zinc hexaimidazole chloride, are also considered to comprehend the effect of zinc binding on (15)N chemical shifts.     

Chemical shift tensors of protonated base carbons in helical RNA and DNA from NMR relaxation and liquid crystal measurements

Knowledge of (13)C chemical shift anisotropy (CSA) tensors in nucleotide bases is important for interpretation of NMR relaxation data in terms of local dynamic properties of nucleic acids and for analysis of residual chemical shift anisotropy (RCSA) resulting from weak alignment. CSA tensors for protonated nucleic acid base carbons have been derived from measurements on a uniformly (13)C-enriched helical A-form RNA segment and a helical B-form DNA dodecamer at natural (13)C abundance. The magnitudes of the derived CSA principal values are tightly restricted by the magnetic field dependencies of the (13)C transverse relaxation rates, whereas the tensor orientation and asymmetry follow from quantitative measurements of interference between (13)C-{(1)H} dipolar and (13)C CSA relaxation mechanisms. Changes in the chemical shift between the isotropic and aligned states, Deltadelta, complement these measurements and permit cross-validation. The CSA tensors are determined from the experimental Deltadelta values and relaxation rates, under the assumption that the CSA tensor of any specific carbon in a given type of base is independent of the base position in either the RNA or DNA helix. However, the experimental data indicate that for pyrimidine C(6) carbons in A-form RNA the CSA magnitude is considerably larger than in B-form DNA. This result is supported by quantum chemical calculations and is attributed in part to the close proximity between intranucleotide C(6)H and O(5)' atoms in RNA. The magnitudes of the measured CSA tensors, on average, agree better with previous solid-state NMR results obtained on powdered nucleosides than with prior results from quantum chemical calculations on isolated bases, which depend rather strongly on the level of theory at which the calculations are carried out. In contrast, previously computed orientations of the chemical shift tensors agree well with the present experimental results and exhibit less dependence on the level of theory at which the computations are performed.     

Site-specific variations of carbonyl chemical shift anisotropies in proteins

By combining molecular dynamics (MD) simulation with a novel extended density functional theory method, we calculate site-specific carbonyl chemical shift tensors in the SMN Tudor domain. We formulate a simple model for the C' chemical shift anisotropy (CSA) based solely on the isotropic chemical shift. Using this simple chemical shift tensor model and the MD simulation, an accurate prediction of transverse C'/N-H cross-correlated relaxation rates can be obtained.     

Determination of calpha chemical shift tensor orientation in peptides by dipolar-modulated chemical shift recoupling NMR spectroscopy

We present a new method for determining the orientation of chemical shift tensors in polycrystalline solids with site resolution and demonstrate its application to the determination of the Calpha chemical shift tensor orientation in a model peptide with beta-sheet torsion angles. The tensor orientation is obtained under magic angle spinning by modulating a recoupled chemical shift anisotropy (CSA) pattern with various dipolar couplings. These dipolar-modulated chemical shift patterns constitute the indirect dimension of a 2D spectrum and are resolved according to the isotropic chemical shifts of different sites in the direct dimension. These dipolar-modulated CSA spectra are equivalent to the projection of a 2D static separated-local-field spectrum onto its chemical shift dimension, except that its dipolar dimension is multiplied with a modulation function. Both (13)C-(1)H and (13)C-(15)N dipolar couplings can modulate the CSA spectra of the Calpha site in an amino acid and yield the relative orientations of the chemical shift principal axes to the C-H and C-N bonds. We demonstrate the C-H and C-N modulated CSA experiments on methylmalonic acid and N-tBoc-glycine, respectively. The MAS results agree well with the results of the 2D separated-local-field spectra, thus confirming the validity of this MAS dipolar-modulation approach. Using this technique, we measured the Val Calpha tensor orientation in N-acetylvaline, which has beta-sheet torsion angles. The sigma(11) axis is oriented at 158 degrees (or 22 degrees) from the C-H bond, while the sigma(22) axis is tilted by 144 degrees (or 36 degrees) from the C-N bond. Both the orientations and the magnitude of this chemical shift tensor are in excellent agreement with quantum chemical calculations.     

Solid-state NMR and quantum chemical investigations of 13Calpha shielding tensor magnitudes and orientations in peptides: determining phi and psi torsion angles

We report the experimental determination of the (13)C(alpha) chemical shift tensors of Ala, Leu, Val, Phe, and Met in a number of polycrystalline peptides with known X-ray or de novo solid-state NMR structures. The 700 Hz dipolar coupling between (13)C(alpha) and its directly bonded (14)N permits extraction of both the magnitude and the orientation of the shielding tensor with respect to the C(alpha)-N bond vector. The chemical shift anisotropy (CSA) is recoupled under magic-angle spinning using the SUPER technique (Liu et al., J. Magn. Reson. 2002, 155, 15-28) to yield quasi-static chemical shift powder patterns. The tensor orientation is extracted from the (13)C-(14)N dipolar modulation of the powder line shapes. The magnitudes and orientations of the experimental (13)C(alpha) chemical shift tensors are found to be in good accord with those predicted from quantum chemical calculations. Using these principal values and orientations, supplemented with previously measured tensor orientations from (13)C-(15)N and (13)C-(1)H dipolar experiments, we are able to predict the (phi, psi, chi(1)) angles of Ala and Val within 5.8 degrees of the crystallographic values. This opens up a route to accurate determination of torsion angles in proteins based on shielding tensor magnitude and orientation information using labeled compounds, as well as the structure elucidation of noncrystalline organic compounds using natural abundance (13)C NMR techniques.     

Investigation of the polymorphs of dimethyl-3,6-dichloro-2,5-dihydroxyterephthalate by (13)C solid-state NMR spectroscopy.

Two of the three conformational polymorphs of dimethyl-3,6-dichloro-2,5-dihydroxyterephthalate are studied by solid-state NMR techniques. The structural differences between the polymorphs have previously been studied by X-ray. In these two polymorphs named white and yellow due to their color, the major structural difference is the torsional angle between the ester group and the aromatic ring. The yellow form has a dihedral angle of 4 degrees between the plane of the aromatic ring and the plane of the ester group, while the white form has two different molecules per unit cell with dihedral angles of 70 degrees and 85 degrees. This change greatly affects the conjugation in the pi-electronic system. In addition, there are differences in the hydrogen-bonding patterns, with the white form having intermolecular hydrogen bonds and the yellow form having intramolecular hydrogen bonds. In this work, the carbon isotropic chemical shift values and the chlorine electric field gradient (EFG) tensor information are extracted from the (13)C MAS spectra, and the principal values of the chemical shift tensors of the carbons are obtained from 2D FIREMAT experiments. Quantum chemical calculations of the chemical shift tensor data as well as the EFG tensor are performed at the HF and DFT levels of theory on individual molecules and on stacks of three molecules to account for the important intermolecular interactions in the white form. The differences between the spectral data on the two polymorphs are discussed in terms of the known electronic and structural differences.     

Ion-binding study by 17O solid-state NMR spectroscopy in the model peptide Gly-Gly-Gly at 19.6 T

Li(+) and Ca(2+) binding to the carbonyl oxygen sites of a model peptide system has been studied by (17)O solid-state NMR spectroscopy. (17)O chemical shift (CS) and quadrupole coupling (QC) tensors are determined in four Gly-(Gly-(17)O)-Gly polymorphs by a combination of stationary and fast magic-angle spinning (MAS) methods at high magnetic field, 19.6 T. In the crystal lattice, the carbonyl oxygen of the central glycyl residue in two gly-gly-gly polymorphs form intermolecular hydrogen bonds with amides, whereas the corresponding carbonyl oxygens of the other two polymorphs form interactions with Li(+) and Ca(2+) ions. This permits a comparison of perturbations on (17)O NMR properties by ion binding and intermolecular hydrogen bonding. High quality spectra are augmented by density functional theory (DFT) calculations on large molecular clusters to gain additional theoretical insights and to aid in the spectral simulations. Ion binding significantly decreases the two (17)O chemical shift tensor components in the peptide plane, delta(11) and delta(22), and, thus, a substantial change in the isotropic chemical shift. In addition, quadrupole coupling constants are decreased by up to 1 MHz. The effects of ion binding are found to be almost an order of magnitude greater than those induced by hydrogen bonding.     

31P chemical shift tensors for canonical and non-canonical conformations of nucleic acids: a DFT study and NMR implications

31P chemical shift anisotropy (CSA) tensors have been calculated for a set of selected DNA and RNA backbone conformations using density functional theory. The set includes canonical A-RNA, A-DNA, BI-DNA, BII-DNA, ZI-DNA, and ZII-DNA as well as four A-RNA-type, seven non-A-RNA-type, and three non-canonical DNA conformations. Hexahydrated dimethyl phosphate has been employed as a model. The 31P chemical shift tensors obtained are discussed in terms of similarities in the behavior observed for gauche-gauche (gg) and gauche-trans (gt) conformations around the P-O bonds. We show that torsion angles alpha and zeta are major determinants of the isotropic chemical shift deltaiso and of the deltaCSA11 component of the traceless chemical shift tensor, which is revealed in separate ranges of both deltaiso and deltaCSA11 for gg- and gt-conformers, respectively. A clear distinction between the two conformation types has not been found for the deltaCSA22 and deltaCSA33 components, which is attributed to their different directional properties. The 31P CSA tensors exhibit considerable variations resulting in large spans of approximately 16 ppm for deltaCSA11 and approximately 22 ppm for deltaCSA22 and deltaCSA33. We examine the consequences of the CSA variations for predicting the chemical shift changes upon partial alignment deltacsa and for the values of CSA order parameters extracted from the analysis of 31P NMR relaxation data. The theoretical 31P CSA tensors as well as the experimental 31P CSA tensor of barium diethyl phosphate (BDEP) are used to calculate deltacsa for two eclipsed orientations of the CSA and molecular alignment tensors. Percentage differences between the CSA order parameters obtained using the theoretical 31P CSA tensors and the experimental 31P CSA tensor of BDEP, respectively, are also determined.     

Ring current effects in crystals. Evidence from 13C chemical shift tensors for intermolecular shielding in 4,7-di-t-butylacenaphthene versus 4,7-di-t-butylacenaphthylene

13C chemical shift tensor data from 2D FIREMAT spectra are reported for 4,7-di-t-butylacenaphthene and 4,7-di-t-butylacenaphthylene. In addition, calculations of the chemical shielding tensors were completed at the B3LYP/6-311G** level of theory. While the experimental tensor data on 4,7-di-t-butylacenaphthylene are in agreement with theory and with previous data on polycyclic aromatic hydrocarbons, the experimental and theoretical data on 4,7-di-t-butylacenaphthene lack agreement. Instead, larger than usual differences are observed between the experimental chemical shift components and the chemical shielding tensor components calculated on a single molecule of 4,7-di-t-butylacenaphthene, with a root mean square (rms) error of +/-7.0 ppm. The greatest deviation is concentrated in the component perpendicular to the aromatic plane, with the largest value being a 23 ppm difference between experiment and theory for the 13CH2 carbon delta11 component. These differences are attributed to an intermolecular chemical shift that arises from the graphitelike, stacked arrangement of molecules found in the crystal structure of 4,7-di-t-butylacenaphthene. This conclusion is supported by a calculation on a trimer of molecules, which improves the agreement between experiment and theory for this component by 14 ppm and reduces the overall rms error between experiment and theory to 4.0 ppm. This intermolecular effect may be modeled with the use of nuclei independent chemical shieldings (NICS) calculations and is also observed in the isotropic 1H chemical shift of the CH2 protons as a 4.2 ppm difference between the solution value and the solid-state chemical shift measured via a 13C-1H heteronuclear correlation experiment.     

An experimental and theoretical investigation of the chemical shielding tensors of (13)C(alpha) of alanine, valine, and leucine residues in solid peptides and in proteins in solution

We have carried out a solid-state magic-angle sample-spinning (MAS) nuclear magnetic resonance (NMR) spectroscopic investigation of the (13)C(alpha) chemical shielding tensors of alanine, valine, and leucine residues in a series of crystalline peptides of known structure. For alanine and leucine, which are not branched at the beta-carbon, the experimental chemical shift anisotropy (CSA) spans (Omega) are large, about 30 ppm, independent of whether the residues adopt helical or sheet geometries, and are in generally good accord with Omega values calculated by using ab initio Hartree-Fock quantum chemical methods. The experimental Omegas for valine C(alpha) in two peptides (in sheet geometries) are also large and in good agreement with theoretical predictions. In contrast, the "CSAs" (Deltasigma) obtained from solution NMR data for alanine, valine, and leucine residues in proteins show major differences, with helical residues having Deltasigma values of approximately 6 ppm while sheet residues have Deltasigma approximately 27 ppm. The origins of these differences are shown to be due to the different definitions of the CSA. When defined in terms of the solution NMR CSA, the solid-state results also show small helical but large sheet CSA values. These results are of interest since they lead to the idea that only the beta-branched amino acids threonine, valine, and isoleucine can have small (static) tensor spans, Omega (in helical geometries), and that the small helical "CSAs" seen in solution NMR are overwhelmingly dominated by changes in tensor orientation, from sheet to helix. These results have important implications for solid-state NMR structural studies which utilize the CSA span, Omega, to differentiate between helical and sheet residues. Specifically, there will be only a small degree of spectral editing possible in solid proteins since the spans, Omega, for the dominant nonbranched amino acids are quite similar. Editing on the basis of Omega will, however, be very effective for many Thr, Val, and Ileu residues, which frequently have small ( approximately 15-20 ppm) helical CSA (Omega) spans.     

NMR chemical shift powder pattern recoupling at high spinning speed and theoretical tensor evaluation applied to silk fibroin

The NMR pulse sequence RAI (recoupling of anisotropy information) has been improved to obtain powder patterns at high MAS spinning speeds. The 2D iso-aniso experiment displays the static chemical shift spectra on the indirect dimension and the MAS spectra on the direct dimension; hence overlapping chemical shift tensor patterns can be well resolved. This efficient technique is applicable to compounds containing (13)C sp(3) (C(alpha), C(beta)) and sp(2) (C=O) sites with higher chemical shift (CS) anisotropy (CSA), and the reliability of the method was tested here on the (13)C chemical shift tensors of polycrystalline glycine, alanine, and serine. Subsequently, the same experiment was applied to the native silk protein fibroin from Bombyx mori, which consists mainly of these three amino acids. Molecular dynamics (MD) simulations of the silk II crystal structure of Takahashi et al. (Takahashi et al. Int. J. Biol. Macromol. 1999, 24, 127-138) were carried out to study the influence of motions on the chemical shift tensors. The (13)C chemical shift tensors were calculated using the bond polarization theory BPT on 200 structures created by an MD simulation. Very good agreement of the theoretical chemical shift anisotropy values with the experimental NMR results was obtained. The tensor orientations in the protein structure could thus be reliably derived.     

Combined first-principles computational and experimental multinuclear solid-state NMR investigation of amino acids

13C, 14N, 15N, 17O, and 35Cl NMR parameters, including chemical shift tensors and quadrupolar tensors for 14N, 17O, and 35Cl, are calculated for the crystalline forms of various amino acids under periodic boundary conditions and complemented by experiment where necessary. The 13C shift tensors and 14N electric field gradient (EFG) tensors are in excellent agreement with experiment. Similarly, static 17O NMR spectra could be precisely simulated using the calculation of the full chemical shift (CS) tensors and their relative orientation with the EFG tensors. This study allows correlations to be found between hydrogen bonding in the crystal structures and the 17O NMR shielding parameters and the 35Cl quadrupolar parameters, respectively. Calculations using the two experimental structures for L-alanine have shown that, while the calculated isotropic chemical shift values of 13C and 15N are relatively insensitive to small differences in the experimental structure, the 17O shift is markedly affected.     

A high-field solid-state 35/37Cl NMR and quantum chemical investigation of the chlorine quadrupolar and chemical shift tensors in amino acid hydrochlorides

A series of six L-amino acid hydrochloride salts has been studied by 35/37Cl solid-state NMR spectroscopy (at 11.75 and 21.1 T) and complementary quantum chemical calculations. Analyses of NMR spectra acquired under static and magic-angle-spinning conditions for the six hydrochloride salts, those of aspartic acid, alanine, cysteine, histidine, methionine and threonine, allowed the extraction of information regarding the chlorine electric field gradient (EFG) and chemical shift tensors, including their relative orientation. Both tensors are found to be highly dependent on the local environment, with chlorine-35 quadrupolar coupling constants (CQ) ranging from -7.1 to 4.41 MHz and chemical shift tensor spans ranging from 60 to 100 ppm; the value of CQ for aspartic acid hydrochloride is the largest in magnitude observed to date for an organic hydrochloride salt. Quantum chemical calculations performed on cluster models of the chloride ion environment demonstrated agreement between experiment and theory, reproducing CQ to within 18%. In addition, the accuracy of the calculated values of the NMR parameters as a function of the quality of the input structure was explored. Selected X-ray structures were determined (L-Asp HCl; L-Thr HCl) or re-determined (L-Cys HCl.H2O) to demonstrate the benefits of having accurate crystal structures for calculations. The self-consistent charge field perturbation model was also employed and was found to improve the accuracy of calculated quadrupolar coupling constants, demonstrating the impact of the neighbouring ions on the EFG tensor of the central chloride ion. Taken together, the present work contributes to an improved understanding of the factors influencing 35/37Cl NMR interaction tensors in organic hydrochlorides.     

An experimental and theoretical study of the 13C and 31P chemical shielding tensors in solid O-phosphorylated amino acids

A series of l and dl forms of O-phosphorylated amino acids (serine, threonine, tyrosine) have been studied by using solid-state multinuclear NMR spectroscopy and ab initio calculations. Principal elements of the (13)C and (31)P chemical shielding tensors have been measured and discussed in relation to zwitterionic structures and intermolecular contacts. DFT calculations have been compared with experimental data showing their ability to reproduce experimentally obtained tensor values in this challenging class of compounds. The changes of orientation of (31)P chemical shielding tensor with respect to the molecular frame in the presence of hydrogen bonds have been revealed and discussed on the ground of theoretical calculations. The measurements of internuclear P...P distances, based on Zeeman magnetization exchange between (31)P spins with differing chemical shielding tensor orientations, were exploited for a clear distinction between enantiomers and racemates.