Syntheses and characterizations of allyl cellulose and glycidyl cellulose

Allyl cellulose was synthesized by reacting cellulose with allyl bromide in homogeneous LiCl/DMAc solution containing NaOH powder. The degree of substitution (DS) per anhydroglucose (AHG) unit was determined by titrating the allyl cellulose with bromine in chloroform solution, and an allyl DS of 2.80 was found. Glycidyl cellulose was then prepared by reacting this allyl cellulose with peracetic acid in methylene chloride at ambient temperature for 6 days. The measured reaction rate constant was 1.33 × 10^?3 min^?1. The glycidyl cellulose thus obtained with a glycidyl DS of 2.58 was determined by titrating the product with perchloric acid in conjunction with tetrabutylammonium iodide. The 2.58 of glycidyl DS was also confirmed by ¹H-NMR integration. Both allyl cellulose and glycidyl cellulose were analyzed and characterized with FTIR, ¹H-NMR, ¹³C-NMR, TGA, and GPC. During epoxidation of allyl cellulose, possible side reaction leading to ester formation was evidenced from the continuous increase of v_{C? O} at 1735 cm^?1 in FTIR analyses. In addition, a bimodal distribution and a decreased molecular weight for glycidyl cellulose were found from GPC data, which might suggest a possible chain scission at the cellulosic ether linkage. © 1992 John Wiley & Sons, Inc.     

Synthesis of novel adamantoyl cellulose using differently activated carboxylic acid derivatives

New adamantane carboxylic acid esters of cellulose (adamantoylcelluloses) were synthesized homogeneously inN,N-dimethylacetamide/LiCl using differently activatedcarboxylic acid derivatives. This includes the reaction of cellulose with1-adamantoyl chloride and with adamantane-1-carboxylic acid after insitu activation with p-toluenesulfonyl chlorideand with 1,1-carbonyldiimidazole, which is a new and efficient tool. Thedegree of substitution (DS) has been determined by means of ¹H NMRspectroscopy using the perpropionylated adamantoyl cellulose samples. DS valuesas high as 2.1 were achieved. The reaction efficiency was 85% and the DS can becontrolled by the molar ratio and the reaction conditions applied. The reactionoccurs faster at the primary position compared to the secondary ones. Theproducts are soluble in various organic solvents dependent on the DS.Preliminary results of subsequent modifications and properties of theadamantoylcelluloses are discussed as well.     

Cold NaOH/urea aqueous dissolved cellulose for benzylation: Synthesis and characterization

Cold NaOH/urea aqueous dissolved cellulose was studied for the synthesis of benzyl cellulose by etherification with benzyl chloride. By varying the molar ratios of benzyl chloride to OH groups in cellulose (1.5–4.0) and reaction temperatures (65–70 °C), benzyl cellulose with a degree of substitutions (DS) in the range of 0.29–0.54 was successfully prepared under such mild conditions. The incorporation of benzyl groups into cellulose was evidenced by multiple spectroscopies, including FT IR, ¹H NMR, ¹³C NMR, CP/MAS ¹³C NMR and XRD. In addition, the thermal stability and surface morphology of the benzyl cellulose was also investigated with regard to the degree of substitution. The results indicated that the benzyl cellulose product with a low DS (0.51) in the present study reached the same solubility in many organic solvents as compared to those prepared in heterogeneous media. After benzylation, the sample decomposed at a lower temperature with a wider temperature range, which indicated that the thermal stability of benzyl cellulose was lower than that of the native cellulose. In addition, benzylation resulted in a pronounced reduction in crystallinity as well as a fundamental alteration of morphology of the native cellulose.     

Some further observations on the systems cellulose/trifluoroacetic acid/CH2Cl2 and cellulose triacetate/TFA/CH2Cl2

There is little or no trifluoroacetylation of cellulose dissolved in TFA-CH₂Cl₂ admixtures. Both cellulose and cellulose triacetate (CTA)are slowly degraded in the solvent. Cellulose forms a mesophase as low as 4%(w/w)concentration, but CTA has a much higher critical concentration, 20% (w/w), in TFA-CH₂Cl₂. The cellulose behaves as a rigid rod in TFA-CH₂Cl₂ (70/30v/v) and its persistence length calculated using the lattice model approximates its chain length, presumably due to extensive interaction with the solvent. As expected, due to low polymer-solvent interactions, the persistence length of CTA in TFA-CH₂Cl₂ is only one-fourth the chain length.     

Lyotropic mesomorphic formation of cellulose in trifluoroacetic acid-chlorinated-alkane solvent mixtures at room temperature

Mixtures of trifluoroacetic acid (TFA)-1,2-dichloroethane (1,2-DCE); TFA-dichloromethane (CH₂Cl₂); and TFA-trichloromethane (CHCl₃) are excellent cellulose solvents at room temperature. TFA-1,2-DCE and TFA-CH₂Cl₂ are superior to pure TFA. Lyotropic cellulose mesophases were obtained in (20% w/v) solutions of cellulose in these solvent mixtures. The optical and optical rotatory powers of the solutions suggest that the lyotropic mesophase of cellulose is cholesteric. This implies that cellulose molecules are arranged in helical form in these solvent systems.     

Direct sulfation of bacterial cellulose with a ClSO3H/DMF complex and structure characterization of the sulfates

Bacterial cellulose (BC) is a form of cellulose synthesized by microorganisms, which has unique structure properties and differs from plant cellulose. Up to now, chemical modification of BC has not been studied widely. This paper aims to prepare sodium bacterial cellulose sulfate (SBS) in N,N‐dimethylformamide (DMF) with a ClSO₃H/DMF complex as the sulfating agent. SBSs with diverse degree of sulfation (DS, 0.04–0.86) were synthesized. The system could change from heterogeneous to homogeneous during the sulfation. Regarding to the DS, the optimal ClSO₃H amount and reaction time were 6 mol/mol anhydroglucose unit and 4 h, respectively. DS increased a little when increasing the temperature, while the yield decreased significantly. SBSs with DS > 0.24 were soluble in deionized water. Carbon nuclear magnetic resonance spectroscopy revealed that the sulfation prefers to take place in the order of C‐6 > C‐2 > C‐3. The X‐ray diffraction profiles indicated that the crystalline structure of BC was destroyed during sulfation. BC has better reactivity than microcrystalline cellulose in both sulfation and depolymerization processes. SBS is a potential biomaterial. However, BC depolymerized obviously in present sulfation, which forbids application of SBS in material. Moisture of the reaction mixture should be removed as completely as possible to guarantee efficient sulfation and decrease depolymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

Grafting of monodisperse low-molecular-weight polystyrene onto cellulose acetate

Well-defined low-molecular-weight polystyrene was grafted onto cellulose acetate in a homogeneous solution. The grafting was performed by esterifying the free hydroxyls in the cellulose acetate (acetyl DS 2.5) with anionically prepared polystyrene having a carboxylic acid group at one end of the chain. The carboxylic acid end group of the polystyrene was activated by either conversion to the corresponding acid chloride, or by reaction with trifluoroacetic anhydride. Pyridine and the more active 4-dimethylaminopyridine were used as catalysts in the esterifications. The polystyrene contents of the copolymers varied between 10 and 80% and the molecular weights of the polystyrene grafts were 2500, 12,100 and 17,100 (M?_w/M?_n = 1.1).     

Synthesis and characterization of novel amino cellulose esters

The homogeneous conversion of cellulose dissolved in N-methyl-2-pyrrolidone/LiCl and 1-N-butyl-3-methylimidazolium chloride with N-methyl-2-pyrrolidone, ε-caprolactam, N-methyl-ε-caprolactam, and N-methyl-2-piperidone in the presence of p-toluenesulphonic acid chloride was studied. Depending on the reaction conditions, novel cellulose esters with degree of substitution (DS) values ranging from 0.12 to 1.17 could be prepared. The structure of the amino group containing cellulose esters was elucidated by elemental analysis, FTIR- and NMR spectroscopy. NMR spectroscopy revealed an almost complete esterification of position 6 of the anhydroglucose unit at DS of 1. The conversion can be conducted between room temperature and 40 °C, while side-reactions became predominant at 60 °C. Starting with DS of 0.24, the samples were soluble both in water and dimethyl sulphoxide. The derivatives described are capable of forming polyelectrolyte complexes. The samples were stable at room temperature in aqueous solution at pH 2 and 7. Lower viscosities were found for samples with higher DS in aqueous solution at comparable molar mass.     

Binding cellulose and chitosan via click chemistry: Synthesis,characterization, and formation of some hollow tubes

A novel cellulose‐click‐chitosan polymer was prepared successfully in three steps: (1) propargyl cellulose with degrees of substitution (DS) from 0.25 to 1.24 was synthesized by etherification of bamboo Phyllostachys bambusoide cellulose with propargyl chloride in DMA/LiCl in the presence of NaH. The regioselectivity of propargylation on anhydrous glucose unit determined by GC‐MS was in the order of 2 >> 6 > 3; (2) the functional azide groups were introduced onto the chitosan chains by reacting chitosan with 4‐azidobenzoic acid in [Amim]Cl/DMF and the DS ranged from 0.02 to 0.46; (3) thus, the cellulose‐click‐chitosan polymer was obtained via click reaction, that is, the Cu(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction, between the terminal alkyne groups of cellulose and the azide groups on the chitosan backbone at room temperature. The successful binding of cellulose and chitosan was confirmed and characterized by FTIR and CP/MAS ¹³C NMR spectroscopy. TGA analyses indicated that the cellulose‐click‐chitosan polymer had a higher thermal stability than that of cellulose and chitosan as well as cellulose–chitosan complex. More interestingly, some hollow tubes with near millimeter length were also observed by SEM. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel cellulose derivatives. II. synthesis and characteristics of mono-functional cellulose propionate segments

Mono-functional cellulose propionate segments for use in ter- or star-block polymers have been prepared by the depolymerization (step 1) of cellulose propionate in homogeneous phase using a mixture of HBr and propionic anhydride in methylene chloride solution. The anomeric mixture of glycosyl bromide has subsequently (step 2) been hydrolyzed in aqueous acetone. Functionality was determined by H-NMR spectroscopy of triethyl silane derivatives in combination with gel permeation chromatography. The cellulose ester segments were semi-rigid, highly crystalline materials with melting points between 180° and 250°C. The lowest useful segment size, based on crystallinity and Mark-Houwink-Sakurada exponential factor, appeared to be DP 20, with an optimum around DP 40 to 50.Part I has been published in theJ. Appl. Polym. Sci.,49, 1671 (1993).     

Blends of poly(ethylene terephthalate) and cellulose

Poly(ethylene terephthalate) (PET) (intrinsic viscosity 0.59) and cellulose (Whatman) are compatible in up to 7.5% (w/v) solutions in trifluoroacetic acid and in mixtures of trifluoroacetic acid and methylene chloride. Evaporation of the solutions yielded films that did not contain cellulose per se, but rather partial esters of cellulose and trifluoroacetic acid. Clear films were cast from these solutions with compositions of 100/0, 75/25, 50/50, 25/75, and 0/100 PET. cellulose (w/w). Infrared spectra and DSC measurements indicate specific polymer-polymer interaction although two T_g were observed. Hydrolysis of the trifluoroacetate films to blends of PET and regenerated cellulose was accomplished by suspending the films in water at the boil. Infrared spectra indicate no interaction between the two polymers, although the films of the 50/50 and 25/75 PET. cellulose compositions were clear. The 25/75 composition, from its T_g and melting-point behavior appears to be a dispersion of very small-particle PET in a cellulose matrix. The 75/25 composition became opalescent during the hydrolysis and may be a dispersion of large-particle cellulose in a PET matrix. The regenerated cellulose appears to be a mixture of cellulose II and IV polymorphs.     

Synthesis of carboxyl cellulose sulfates with regioselective sulfation and regiospecific oxidation using cellulose trifluoroacetate as intermediates

Synthesis of cellulose sulfates (CSs) and carboxyl cellulose sulfates (COCSs) with regioselectively or regiospecifically distributed functional groups within anhydroglucose units was reported. CS with regioselectively distributed sulfate groups at 2,3-O- or 2,6-O-position were homogeneously synthesized and cellulose trifluoroacetate (CTFA) was used as intermediates. The trifluoroacetyl groups were detected primarily at 6-O-position and their distributions could be altered by changing the amount of trifluoroacetyl anhydride (TFAA). Various sulfating agents were used for further homogeneous sulfation of CTFA. The total degree of sulfation (DS_S) and the distribution of sulfate groups within the repeating units were affected by the amount of TFAA, the type and amount of sulfating agents. Subsequent homogenous 4-acetamide-TEMPO or TEMPO-mediated oxidation of CS led to COCS with carboxyl groups regiospecifically distributed at C6 position, which may be interesting structural mimics for natural occurring heparin.     

Homogeneous methylation of wood pulp cellulose dissolved in LiOH/urea/H2O

Spruce sulphite cellulose (number average degree of polymerization 620) dissolved in an aqueous solution of 8% (w/w) LiOH*H₂O and 12% (w/w) urea was methylated with dimethyl sulphate (DMS). By varying the reaction temperature between 22 and 50 °C, the molar ratio between 9 and 15 mol DMS per mol anhydroglucose unit, and the reaction time from 4 to 24 h, methyl cellulose (MC) with degree of substitution (DS) values in the range of 1.07 and 1.59 was prepared. The chemical structure of MC was analysed by FTIR and ¹H NMR spectroscopy. The turbidity (given in nephelometric turbidity units, NTU) of the aqueous solution of MC reached an optimum of 10 NTU for a product obtained with 12 mol DMS/mol AGU at 50 °C. GPC measurements revealed polymer degradation to a certain extent. The intrinsic viscosity and the Huggins constant k of the MC samples increased with increasing DS value. The MC samples possess k values higher than 0.8, indicating association of the polymer chain. The zero-shear viscosity decreased with increase of both temperature and the amount of methylation agent due to the depolymerization. During the heating/cooling cycle (20-90 °C) of the aqueous solutions of MC, it was observed that samples synthesized at 22 °C with DS values lower than 1.3 did not undergo phase separation in aqueous solution. Phase separation hysteresis with a precipitation temperature up to 80 °C was obtained for aqueous solutions of MC with DS values between 1.07 and 1.66 synthesized at higher temperatures. The functionalization pattern determined by GLC of the corresponding partially methylated glucitol acetates is close to randomness and comparable with those of commercial MC samples.     

Preparation and characterization of cellulose β-ketoesters prepared by homogeneous reaction with alkylketene dimers: comparison with cellulose/fatty acid esters

Cellulose was dissolved in lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI), and reacted with alkylketene dimers (AKDs) under non-aqueous and homogeneous conditions to prepare cellulose/AKD β-ketoesters with high degrees of substitution (DS). Six AKDs synthesized from octanoic, decanoic, dodecanoic, tetradecanoic, hexadecanoic and octadecanoic acids via their fatty acid chlorides were used in this study. The cellulose/AKD β-ketoesters obtained were gummy solid at room temperature, and had DS values ranging from 1.9 to 2.9. Cellulose/fatty acid esters with DS 2.5–2.9 were also prepared as references. ¹³C-NMR spectra of the cellulose/AKD β-ketoesters showed that cellulose carbons and substituent carbons close to cellulose chains were restricted in motion and behaved like solid in solutions. In contrast, the cellulose/fatty acid esters did not demonstrate such anomalous ¹³C-NMR spectra. The unique ¹³C-NMR patterns are characteristic for the cellulose/AKD β-ketoesters, which have long and branched alkyl substituents in each anhydroglucose unit. Size-exclusion chromatography furnished with multi-angle laser light scattering (SEC-MALLS) revealed, on the other hand, that all cellulose/AKD β-ketoesters and cellulose/fatty acid esters prepared had flexible or random-coil conformations in tetrahydrofuran (THF). There were no clear differences in conformation or stiffness of cellulose chains between cellulose/AKD β-ketoesters and cellulose/fatty acid esters.     

Thermal and liquid crystalline properties of cellulose β-ketoesters prepared by homogeneous reaction with ketene dimers

Cellulose β-ketoesters having long alkyl or alkenyl chains were prepared by homogeneous reactions with alkyl or alkenyl ketene dimmers (OKD or AKD), and were characterized by X-ray diffractometory, differential scanning calorimetry, optical microscopy with cross polarizers and others. The Cellulose/OKD and AKD β-ketoesters with degrees of substitution (DS) of more than 1.5 were gummy solid at room temperature and had birefringence due to liquid crystalline structures in wide temperature range. The liquid crystalline/isotropic phase transition points were 150–175 °C, depending on the DS and substituents introduced into cellulose hydroxyls. X-ray diffraction patterns indicated that cellulose backbones had disordered structures at room temperature, while alkyl chains in the substituents formed ordered or crystalline domains in the cellulose β-ketoesters. Films of the cellulose/AKD β-ketoesters prepared by casting their chloroform solutions on glass plates had highly hydrophobic nature, and contact angles of water droplet on the films were more than 90°. The water-contact angles on the films decreased to some extent just after heating of the films at 105 °C, whereas they were gradually recovered to the initial values by conditioning at ambient temperature.     

Surface methacrylation and graft copolymerization of ultrafine cellulose fibers

Ultrafine fibrous (? from 100 to 450 nm) cellulose membranes were generated by electrospinning of cellulose acetate [degree of substitution (DS): 2.45, weight‐average molecular weight: 30,000 Da], followed by alkaline deacetylation. Reaction of these ultrahigh surface‐area cellulose fibers with methacrylate chloride (MACl) produced activated surfaces without altering the fiber morphology. Surface methacrylation of these fibers was confirmed by the acquired hydrophobicity (θ_water = 84°) as compared to the originally hydrophilic (θ_water = 56°) cellulose. Changing the MACl:OH molar ratios could vary the overall DS of methacrylation. The very low overall DS values indicate the surface nature of the methacrylation reaction. At a DS of 0.17, the thermal properties of the surface methacrylated cellulose resemble those of cellulose derivatives at much higher DS values, an unusual behavior of the ultrafine fibers. The methacrylated cellulose could be further copolymerized with vinyl monomers (methyl methacrylate, acrylamide, and N‐isopropylacrylamide) as linear grafts or three‐dimensional (3D) networks. The morphology of cellulose fibers and the interfiber pore structure were not altered at 15–33% graft levels. This study demonstrates that either linear or 3D networks of vinyl polymers could be efficiently supported on ultrafine cellulose fibrous membranes via surface methacrylation. Through these surface reactions the chemical, thermal, and liquid wetting and absorbent properties of these ultrafine fibrous membranes were significantly altered with no change to the fiber dimensions or interfiber pore morphology. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 953–964, 2003     

Synthesis and characterization of cellulose derivatives prepared in NaOH/urea aqueous solutions

We successfully synthesized hydroxypropylcellulose (HPC) and methylcellulose (MC) in high yields from cellulose in 6 wt % NaOH/4 wt % urea aqueous solutions at 25 °C. The cellulose derivatives were characterized with NMR, size exclusion chromatography/laser light scattering, gas chromatography (GC), ultraviolet, and solubility measurements in different solvents. According to the results of solution ¹³C NMR and GC, the individual degree of substitution (DS; i.e., the average number of substituted hydroxyl groups in the monomer unit) at C‐2 hydroxyl groups was slightly higher than the DS values at C‐3 and C‐6 hydroxyl groups for HPC and MC. In comparison with traditional systems, NaOH/urea aqueous solutions were proved to be a stable and more homogeneous reaction medium for preparing cellulose ether with a more uniform microstructure. The low limits for the average number of moles of the substituent groups per monomer unit and the DS value of water‐soluble HPC were 1.03 and 0.85, respectively. MC (DS = 1.48) had good solubility in both water and organic solvents, and the precipitation point occurred at about 67 °C for a 2% (w/v) aqueous solution. In this way, we could provide a simple, pollution‐free, and homogeneous aqueous solution system for synthesizing cellulose ethers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5911–5920, 2004     

Reversible hydrophobization and lipophobization of cellulose fibers via trifluoroacetylation

The surface modification of cellulose fibers with trifluoroacetic anhydride (TFAA) was studied using the heterogeneous cellulose/TFAA/pyridine/toluene system. The degree of substitution (DS) of the ensuing trifluoroacetylated fibers ranged from 0.04 to 0.30. This treatment conferred a high degree of both hydrophobicity and lipophobicity on the fibers' surface, even at low DS values. Both the dispersive and the polar contributions to the surface energy were drastically reduced. However, the original cellulose hydrophilicity could be readily restored through hydrolysis, by treating the modified fibers with neutral water.     

High-efficacy antimicrobial cellulose grafted by a novel quaternarized N-halamine

A novel quaternarized N-halamine precursor (3-chloro-2-hydroxypropyl)-(5, 5-dimethylhydantoinyl-1-ylmethyl)-dimethylammonium chloride (CDDAC), has been synthesized by a very facile two-step reaction. The two-step synthesis of CDDAC occurred at room temperature with common reactors, so the production of CDDAC could be easily enlarged to an industrial scale. Without any work-up, the final reaction solution which contained CDDAC could be directly used as grafting solution. CDDAC could be effectively grafted onto the surface of cellulose by a dehydrochlorination reaction. CDDAC grafted on cellulose was converted to N-halamine structure which showed powerful antimicrobial property by a chlorination reaction in the diluted NaClO solution. The antimicrobial tests showed that the chlorinated cellulose grafted with CDDAC was capable of 5-log inactivation of S. aureus and E. coli within 5 min. Also, the washing durability and storage stability of chlorinated cellulose grafted with CDDAC were investigated.     

Novel cellulose esters derived from the levopimaric acid-maleic anhydride adduct: synthesis,characterization, and properties

Synthesis of maleated pimaric acid (MPA) cellulose esters is first reported in this work. Cellulose esterification was performed by reacting microcrystalline cellulose with monoacid chloride of MPA (MPA-Cl) in presence of pyridine as catalyst and reaction medium. The syntheses were started in a heterogeneous solid–liquid reaction medium, but as the reaction advanced, the reaction mass turned into a homogeneous solution. The effects of MPA-Cl/anhydroglucose unit molar ratio, reaction temperature, and reaction duration on the yield and degree of substitution (DS) of cellulose esters (CEs) were investigated. CEs with DS ranging from 2.6 to 2.8 were achieved at molar ratios of 5.5–6.0 after 12–16 h at 118 °C. The purified products were characterized by elemental analysis, IR and ¹³C-NMR spectroscopy, and thermogravimetric analysis. CEs are soluble or partially soluble in usual organic solvents, depending on DS. Transparent films were prepared using CE-cyclohexanone solutions.