Ultrasensitive electrochemiluminescence immunoassay for tumor marker detection using functionalized Ru-silica@nanoporous gold composite as labels

In this work, we reported a simple and sensitive sandwich-type electrochemiluminescence (ECL) immunosensor for carcinoembryonic antigen (CEA) on a gold nanoparticles (AuNPs) modified glassy carbon electrode (GCE). The Ru-silica (Ru(bpy)(3)(2+)-doped silica) capped nanoporous gold (NPG) (Ru-silica@NPG) composite was used as an excellent label with amplification techniques. The NPG was prepared with a simple dealloying strategy, by which silver was dissolved from silver/gold alloys in nitric acid. The primary antibody was immobilized on the AuNPs modified electrode through l-cysteine and glutaraldehyde, and then the antigen and the functionalized Ru-silica@NPG composite labeled secondary antibody were conjugated successively to form a sandwich-type immunocomplex through the specific interaction. The concentrations of CEA were obtained in the range from 1 pg mL(-1) to 10 ng mL(-1) with a detection limit of 0.8 pg mL(-1). The as-proposed ECL immunosensor has the advantages of high sensitivity, specificity and stability and could become a promising technique for tumor marker detection.     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

Sensitive electrochemical immunosensor array for the simultaneous detection of multiple tumor markers

A novel electrochemical immunosensor array for the simultaneous detection of multiple tumor markers was developed by incorporating electrochemically addressing immobilization and one signal antibody strategy. As a proof-of-principle, an eight-electrode array including six carbon screen-printed working electrodes was used as a base array for the analysis of two important tumor markers, carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) and a horseradish peroxidase-labeled antibody was employed as a signal antibody. The immunosensor in the array was fabricated in sequence by covalently coupling the capture antibody onto the surface of the desired working electrode, which was firstly electrochemically addressably grafted with an aminophenyl group by reduction of in situ generated aminophenyl diazonium cation generated from p-phenylenediamine, using glutaraldehyde as cross-linker. This allowed the selective immobilization of the capture antibody at the desired position on a single array via an electrochemical operation. The immunoassay in sandwich mode was performed by specifically binding the targets, second antibodies and one signal antibody to the immunosensor array. The result showed that the steady current density was directly proportional to the concentration of target CEA/AFP in the range from 0.10 to 50 ng mL(-1) with a detection limit of 0.03 ng mL(-1) for CEA and 0.05 ng mL(-1) for AFP (S/N = 3), respectively. This work demonstrates that the employment of an electrochemically addressing method for the fabrication of an immunosensor array and one signal antibody is a promising approach for the determination of multiple tumor markers in clinical samples.     

Electrochemical immunoassay for α-fetoprotein through a phenylboronic acid monolayer on gold

A novel reusable electrochemical immunosensor for α-fetoprotein (AFP) based on phenylboronic acid monolayer on gold was proposed. The sensor was fabricated by immobilizing of 3-aminophenylboronic acid (APBA) conjugated thiol-mixed monolayer on gold through 2-(5-norbornene-2,3-dicarboximido)-1,1,3,3-tetramethyluronium tetrafluoroborate (TNTU) as linkage. AFP and enzyme-conjugated antibody were further trapped to the modified electrode surface through sugar-boronic acid and immunoaffinity interactions, respectively. The attached enzyme-conjugated antibody on the electrode surface could catalyze the reduction of hydrogen peroxide in the presence of thionine, which can be used to detect AFP in human serum by a competitive mechanism. Cyclic voltammetric, electrochemical impedance studies and photometric activity assays were used to probe the assembly and regeneration process of the immunosensor. The influences of the competitive ratio of antigen and antibody, pH value of the measuring solution, incubation temperature and time were explored for optimizing the analytical performance. The whole assay process including incubation, detection and regeneration of the electrode could be completed in 35 min. The detection of AFP in five serum samples provided from clinically diagnosed patients with liver cancer showed acceptable accuracy. The proposed immunosensor enabled fast, low-cost and would be valuable for clinical diagnosis.     

A designer ormosil gel for preparation of sensitive immunosensor for carcinoembryonic antigen based on simple direct electron transfer

The excellent direct electron transfer (DET) of enzyme labeled to antibody immobilized in designer organically modified silicate (ormosil) sol–gel was achieved at an electrode, which was used to construct a novel reagentless immunosensor for antigen determination. The synthesized ormosil architecture provided a hydrophilic interface for retaining the activity of immobilized enzyme labeled immunocomponent. The proposed immunosensor for carcinoembryonic antigen (CEA) prepared by immobilizing horseradish peroxidase-labeled CEA antibody (HRP-anti-CEA) in the architecture showed a surface-controlled electrode process attributed to the DET between electrode and HRP with a rate constant of 5.94 ± 0.40 s⁻¹. The formation of immunocomplex upon incubation in CEA or sample solution led to block of DET and linearly decrease in voltammetric response over CEA concentration ranging from 0.5 to 3.0 and 3.0 to 120 ng ml⁻¹. The limit of detection for CEA was 0.4 ng ml⁻¹. The immunosensor showed good accuracy and acceptable storage stability, precision and reproducibility. The proposed method was simple, low-cost and potentially attractive for clinical immunoassays.     

Dynamic-covalent macromolecular stars with boronic ester linkages

Macromolecular stars containing reversible boronic ester linkages were prepared by an arm-first approach by reacting well-defined boronic acid-containing block copolymers with multifunctional 1,2/1,3-diols. Homopolymers of 3-acrylamidophenylboronic acid (APBA) formed macroscopic dynamic-covalent networks when cross-linked with multifunctional diols. On the other hand, adding the diol cross-linkers to block copolymers of poly(N,N-dimethylacrylamide (PDMA))-b-poly(APBA) led to nanosized multiarm stars with boronic ester cores and PDMA coronas. The assembly of the stars under a variety of conditions was considered. The dynamic-covalent nature of the boronic ester cross-links allowed the stars to reconfigure their covalent structure in the presence of monofunctional diols that competed for bonding with the boronic acid component. Therefore, the stars could be induced to dissociate via competitive exchange reactions. The star formation-dissociation process was shown to be repeatable over multiple cycles.     

Phenylboronic acid self-assembled layer on glassy carbon electrode for recognition of glycoprotein peroxidase

We have successfully fabricated a phenylboronic acid self-assembled layer on glassy carbon electrodes (GCE), where 3-aminophenylboronic acid (APBA) is covalently bound to the electrochemical pretreated GCE surface with glutaraldehyde linkage. The specific binding of glycoprotein peroxidase with the self-assembled layer has been studied using horseradish peroxidase (HRP) as a model glycoprotein. Cyclic voltammetric, electrochemical impedance studies and photometric activity assays show that the affinity interaction of HRP with the APBA modified GCE surface includes specific and nonspecific bonding. The specific binding is attributed to the boronic acid–diols interaction where the boronic acid specifically binds the glycosylation sites of the HRP. This specific binding is reversible and can be split by sorbitol and glucose or released in an acidic buffer. The catalytic current of the HRP-loaded electrode, due to the catalytic oxidation of thionine in the presence of hydrogen peroxide, is proportional to HRP concentrations of the incubation solution. This work offers a new way to build novel sensors by specific binding of glycoproteins to a boronic acid self-assembled layer for determination of glycated proteins.     

Ultrasensitive electrochemical immunosensor of carcinoembryonic antigen based on gold-label silver-stain signal amplification

A novel gold-label silver-stain electrochemical immunosensor based on polythionine-gold nanoparticles (PTh-Au NPs) modified glassy carbon electrode (GCE) as a platform and secondary antibody labeled Au NPs (Ab₂-Au NPs) as immumoprobe for carcinoembryonic antigen (CEA) detection. The sandwich-type biosensor adopted anodic stripping voltammetry to detect silver stripping signal when the Ab₂-Au NPs of the formed immunocomplexes were stained with silver.     

Magnetic core-shell Fe3O4@Ag nanoparticles coated carbon paste interface for studies of carcinoembryonic antigen in clinical immunoassay

This study demonstrates a novel approach toward development of advanced immunosensors based on chemically functionalized core-shell Fe3O4@Ag magnetic nanoparticles, and the preparation, characterization, and measurement of relevant properties of the immunosensor useful for the detection of carcinoembryonic antigen (CEA) in clinical immunoassay. The immunosensor based on the combination of a magnetic nanocore and an Ag metallic shell shows good adsorption properties for the attachment of the CEA antibody selective to CEA. The core-shell nanostructure presents good magnetic properties to facilitate and modulate the way it was integrated into a carbon paste. Under optimal conditions, the resulting composite presents good electrochemical response for the detection of CEA, and allows detection of CEA at a concentration as low as 0.5 ng.mL(-1). Importantly, the proposed methodology could be extended to the detection of other antigens or biocompounds.     

Iridium Oxide Film-Enhanced Impedance Immunosensor for Rapid Detection of Carcinoembyronic Antigen

A simple, rapid and sensitive impedance immunosensor based on iridium oxide （IrOx） thin film for the detection of carcinoembyronic antigen （CEA） in human sera has been proposed. Gold electrode was electrochemically modified with IrOx thin film and simultaneously functionalized with protein A （PA） to bind anti-CEA antibodies in an orientated way. It has been found that the antibody loading amount was dependent on the PA concentration and the deposition time of IrOx matrix. Under the optimized experimental conditions, the electron transfer resistances obtained were linearly related to the CEA concentration ranging from 36.2 to 460.0 ng/mL, with a detection limit of 28.0 ng/mL. Analytical results of clinical samples from cancer patients show that the proposed immunoassay is reasonably comparable with the chemiluminescence immunoassay （CLIA）, indicating the feasibility of using the proposed method for CEA immunoassay in clinical laboratory.     

基于金纳米颗粒负载的金属有机骨架材料的癌胚抗原传感器的研制

以负载Au的金属有机骨架材料(AuNPs/Cu-TPA)标记CEA抗体(Ab2)为信号探针,通过电还原的方法将氧化石墨烯还原到电极上,研制了一种捕获CEA抗体(Ab1)的电化学免疫传感器,并将其应用于癌胚抗原(CEA)检测.所合成的MOFs材料中含有大量Cu2+,且电化学信号比较稳定,因此可以通过检测MOFs材料中Cu2+的信号实现对CEA的检测.此信号探针不需要预处理和酸处理,易负载贵金属从而固定抗体,大大简化了检测步骤并缩短了检测时间.此传感器对CEA的检测灵敏度好,操作简便.在最优实验条件下,此传感器的线性范围为0.1～ 80 ng/mL,检出限为0.03 ng/mL,线性相关系数为0.9887,可用于真实样品中CEA的测定.     

Sandwich-type electrochemiluminescence immunosensor based on N-(aminobutyl)-N-ethylisoluminol labeling and gold nanoparticle amplification

A novel electrochemiluminescence (ECL) sandwich-type immunosensor for human immunoglobulin G (hIgG) on a gold nanoparticle modified electrode was developed by using N-(aminobutyl)-N-ethylisoluminol (ABEI) labeling. The primary antibody, goat-anti-human IgG was first immobilized on a gold nanoparticle modified electrode, then the antigen (human IgG) and the ABEI-labeled second antibody was conjugated successively to form a sandwich-type immunocomplex. ECL was carried out with a double-step potential in carbonate buffer solution (CBS) containing 1.5 mM H₂O₂. The ECL intensity increased linearly with the concentration of hIgG over the range 5.0-100 ng/mL. The limit of detection was 1.68 ng/mL (S/N = 3). The relative standard deviation was 3.79% at 60 ng/mL (n = 9). The present immunosensor is simple and sensitive. It has been successfully applied to the detection of hIgG in human serums.     

磁性纳米金共价固定癌胚抗原单克隆抗体的电流型免疫传感器

合成了Fe3O4/Au磁性复合纳米粒子, 在粒子表面通过自组装硫脲分子使表面氨基化, 再用戊二醛共价交联固定癌胚抗原抗体(anti-CEA). 在外加磁场的作用下, 将anti-CEA复合磁性粒子吸附在固体石蜡碳糊电极表面, 制成了新型电流型免疫传感器. 免疫电极在含有癌胚抗原CEA和辣根过氧化物酶标记的癌胚抗原(HRP-CEA)的混合溶液中温育, CEA和HRP-CEA与固定在电极表面的anti-CEA发生竞争反应, 导致HRP对H2O2的催化降解作用的改变, 从而可间接测定CEA. 由于标记的HRP可催化降解H2O2, 导致媒介体间苯二酚浓度改变, 使测定的灵敏度大大提高. 响应电流与CEA质量浓度的对数在2~160 ng/mL的范围内呈线性关系, 检出限为0.57 ng/mL(3σ法). 该免疫传感器具有制作简单、价廉及表面易于更新等特点.     

Electro‐nano Diagnostic Platforms for Simultaneous Detection of Multiple Cancer Biomarkers

In this study, a bimetallic nanomaterial‐based electrochemical immunosensor was developed for the detection of carcinoembryonic antigen (CEA) and vascular endothelial growth factor (VEGF) cancer biomarkers at the same time. CEA and VEGF biomarkers are indicators for colon and breast cancers and stomach cancers, respectively. During the study, gold nanoparticle (AuNp), lead nanoparticle (PbNp), copper nanoparticle (CuNp) and magnetic gamma iron(III)oxide (γFe₂O₃ Np) were synthesized, characterized and used together for the first time in the structure of an electrochemical biosensor based on anti‐CEA and anti‐VEGF. For this purpose, Au SPE based sandwich immunosensor was fabricated by using labeled anti‐CEA (labeled with Pb⁺²) and labeled anti‐VEGF (labeled with Cu⁺²). As a result, CEA and VEGF biomarkers were detected following the oxidation peaks of label metals (Pb⁺² and Cu⁺²) by using differential pulse voltammetry. After the experimental parameters were optimized, the linear range was found in the concentration range between 25 ng/mL and 600 ng/mL with the relative standard deviation (RSD) value of (n=3 for 600 ng/mL) 3.33 % and limit of detection (LOD) value of 4.31 ng/mL for CEA biomarker. On the other hand, the linear range was found in the concentration range between 0.2 ng/mL and 12.5 ng/mL with the RSD value of (n=3 for 12.5 ng/mL) 5.31 % and LOD value of 0.014 ng/mL for VEGF biomarker. Lastly, sample application studies for synthetic plasma sample and interference studies with dopamine, ascorbic acid, BSA, cysteine and IgG were carried out.     

A novel electrochemical immunosensor based on colabeled silica nanoparticles for determination of total prostate specific antigen in human serum

A novel electrochemical immunosensor using functionalized silica nanoparticles (Si NPs) as protein tracer has been developed for the detection of prostate specific antigen (PSA) in human serum. The immunosensor was carried out based on a heterogeneous sandwich procedure. The PSA capture antibody was immobilized on the gold electrode via glutaraldehyde crosslink. After reaction with the antigen in human serum, Si NPs colabeled with detection antibody and alkaline phosphatase (ALP) was sandwiched to form the immunocomplex on the gold electrode. ALP carried by Si NPs convert nonelectroactive substrate into the reducing agent and the latter, in turn, reduce metal ions to form electroactive metallic product on the electrode. Linear sweep voltammetry (LSV) was used to quantify the amount of the deposited silver and give the analytical signal for PSA. The parameters including the concentration of the ALP used to functionalize the Si NPs and the enzyme catalytic reaction time have been studied in detail and optimized. Under the optimum conditions of immunoreaction and electrochemical detection, the electrochemical immunosensor was able to realize a reliable determination of PSA in the range of 1–35 ng/mL with a detection limit of 0.76 ng/mL. For six human serum samples, the results performed with the electrochemical immunosensor were in good agreement with those obtained by chemiluminescent microparticle immunoassay (CMIA), indicating that the electrochemical immunosensor could satisfy the need of practical sample detection.     

Electrochemical immunosensor for carcinoembryonic antigen based on antigen immobilization in gold nanoparticles modified chitosan membrane.

A disposable electrochemical immunosensor for carcinoembryonic antigen (CEA) was proposed based on the antigen immobilized in a colloidal gold nanoparticles modified chitosan membrane on the surface of an indium-tin oxide (ITO) electrode. The different membranes were characterized by scanning electron microscope and electrochemical methods. Based on a competitive immunoassay format, the immobilized antigen of the immunosensor was incubated with a horseradish peroxidase (HRP) labeled antibody and sample CEA antigen, and the formed immunoconjugate in the immunosensor was detected by an o-phenylenediamine-H(2)O(2)-HRP electrochemical system. Under the optimal experimental conditions, the electrocatalytic current decreased linearly with the competitive mechanism. CEA could be determined in the linear range from 2.0 to 20 ng/ml with a detection limit of 1.0 ng/ml. The prepared CEA immunosensor is not only economic due to the low-cost ITO electrode obtained from industrial mass production, but is also capable with good stability and reproducibility for batch fabrication.     

One‐Step Electrochemical Immunoassay for Carcinoembryonic Antigen in Human via Back‐Filling Immobilization of Gold Nanoparticles on DNA‐Modified Gold Electrodes

A new amperometric immunobiosensor for carcinoembryonic antigen (CEA) determination in human serum was developed via encapsulation of horseradish peroxidase‐labeled carcinoembryonic antibody (HRP‐anti‐CEA) in a gold nanoparticles/DNA composite architecture. The presences of gold nanoparticles provided a congenial microenvironment for the immobilized biomolecules and decreased the electron transfer impedance, leading to a direct electrochemical behavior of the immobilized HRP. The formation of the antibody–antigen complex by a simple one‐step immunoreaction between the immobilized HRP‐anti‐CEA and CEA in sample solution introduced a barrier of direct electrical communication between the immobilized HRP and the gold electrode surface. Under optimal conditions, the current change obtained from the labeled HRP relative to H₂O₂ system was proportional to the CEA concentration in two linear ranges from 0.5 to 15 ng/mL and 15 to 300 ng/mL with a detection limit of 0.1 ng/mL (at 3δ). The precision and reproducibility are acceptable with the intraassay CV of 6.3% and 4.7% at 8 and 60 ng/mL CEA, respectively. The storage stability of the proposed immunosensor is acceptable in a pH 7.0 PBS at 4 °C for 9 days. Moreover, the proposed immunosensors were used to analyze CEA in human serum specimens. Analytical results of clinical samples show the developed immunoassay has a promising alternative approach for detecting CEA in the clinical diagnosis.     

Nitrogen-doped TiO2 Nanocrystals for Highly Sensitive Electrochemical Immunoassay of Carcinoembryonic Antigen

Nitrogen-doped TiO₂ nanocrystals (N−TiO₂ NCs) were simply synthesized and then functionalized with streptavidin for highly sensitive electrochemical immunoassay of tumor marker. Scanning electron microscopy, transmission electron microscopy, static water contact angle, and cyclic voltametric measurement were adapted to examine the properties of N−TiO₂ NCs and resultant immunosensor. The functionalized N−TiO₂ NCs sensing platform shows high electrochemical conductivity, large surface area and excellent hydrophilicity. The features make them to produce high current response, capture more antibody molecules, and maintain the bioactivity of immobilized antibodies. By means of carcinoembryonic antigen (CEA) as model tumor marker, a wide linear range of 0.005–3 ng/mL and a low detection limit of 0.005 ng/mL (signal-to-noise ratio of 3) were achieved by the proposed CEA immunosensor. Furthermore, the resultant CEA immunosensor displays high specificity and was employed to determine CEA in clinical serum samples.     

基于纳米金与碳纳米管-纳米铂-壳聚糖纳米复合物固定癌胚抗原免疫传感器的研究

采用纳米金(nano-Au)、多壁碳纳米管-纳米铂-壳聚糖的纳米复合物(MWNT-Pt-CS)及电子媒介体硫堇(Th)固载抗体制得高灵敏癌胚抗原免疫传感器．首先, 于壳聚糖溶液中用NaBH4还原H2PtCl6, 并将多壁碳纳米管分散于其中制得碳纳米管-纳米铂-壳聚糖纳米复合物, 并将其滴涂在玻碳电极上成膜; 然后, 吸附电子媒介体硫堇制得硫堇/碳纳米管-纳米铂-壳聚糖(Th/MWNT-Pt-CS)修饰电极．利用壳聚糖和硫堇分子中大量的氨基固定纳米金并吸附癌胚抗体(anti-CEA); 最后, 用辣根过氧化物酶(HRP)封闭活性位点从而制得高灵敏电流型免疫传感器．在优化的实验条件下, 该传感器响应的峰电流值与癌胚抗原(carcinoembryonic antigen)浓度在0.5～10和10～120 ng/mL的范围内保持良好的线性关系, 检测限为0.2 ng/mL．     

一种快速高选择性检测痕量癌胚抗原的共振散射光谱法

用10 nm的金纳米粒子标记单克隆癌胚抗原抗体制备了检测癌胚抗原（CEA）的共振散射光谱探针（Au-CEAAb）。在pH 6.8 的Na2HPO4- NaH2PO4缓冲溶液中及聚乙二醇-6000存在下, CEA与Au-CEAAb发生免疫反应聚集形成疏水性的、平均粒径为227.0 nm的免疫复合物微粒,并在321 nm、581 nm产生2个共振散射峰。随着癌胚抗原（CEA）浓度的增大,581 nm处的共振散射强度I581nm线性增加,其增加值△I581nm与CEA浓度在1.0～50.0 ng·mL-1范围内呈良好的线性关系,相应的回归方程、相关系数、检出限(3σ)分别为ΔI581nm=1.63 C +5.6、0.9940、0.52 ng·mL-1。该法简便、快速、灵敏且选择性好,用于检测人血清中癌胚抗原（CEA）,结果满意。