The application of monolithic columns in pesticides analysis

HPLC and HPLC/MS are the most widely used analytical techniques in the field of pesticides analysis. In recent years, there has been considerable focus on fast separations in HPLC in order to reduce analysis time as well as cost. Monolithic columns, consisting of continuous beds with macropores and mesopores, can meet this requirement and have been widely used in the medical and biological fields. However, it has seldom been used when analyzing pesticides. In this work, the application of monolithic columns in pesticides analysis and their advantages are evaluated and compared with those obtained using conventional packed columns.     

毛细管电色谱柱制备技术的进展

介绍了毛细管电色谱开管柱、填充柱和整体柱的各种制备技术及其优势与不足,特别是对于近期发展的毛细管电色谱整体柱的制备方法及其应用进行了系统综述。引用文献100篇。     

Practical aspects of fast reversed-phase high-performance liquid chromatography using 3 microm particle packed columns and monolithic columns in pharmaceutical development and production working under current good manufacturing practice

The potential and limitations of fast reversed-phase high-performance liquid chromatographic separations for assay and purity of drug substances and drug products were investigated in the pharmaceutical industry working under current good manufacturing practice using particle packed columns and monolithic columns. On particle packed columns, the pressure limitation of commercially available HPLC systems was found to be the limiting factor for fast separations. On 3 microm particle packed columns, HPLC run times (run to run) for assay and purity of pharmaceutical products of 20 min could be achieved. As an interesting alternative, monolithic columns were investigated. Monolithic columns can be operated at much higher flow rates, thus allowing for much shorter run times compared to particle packed columns. Compared to particle packed columns, the analysis time could be reduced by a factor up to 6. However, some compounds investigated showed a dramatic loss of efficiency at higher flow rates. This phenomenon was observed for some larger molecules supporting the theory that mass transfer is critical for applications on monolithic columns. At flow rates above 3 ml/min some HPLC instruments showed a dramatic increase in noise, making quantifications at low levels impossible. For very fast separations on monolithic columns, the maximum data acquisition rate of the detector is the limiting factor.     

Monolithic column in gas chromatography

Monolithic columns invented in chromatographic praxis almost 40 years ago gained nowadays a lot of popularity in separations by liquid chromatographic technique. At the same time, application of monolithic columns in gas chromatography is less common and only a single review published by Svec et al. [1] covers this field of research. Since that time a lot of new findings on application and properties of monolithic columns in gas chromatography have been published in the literature deserving consideration and discussion. This review considers preparation of monolithic columns for GC, an impact of preparation conditions on column performance, optimization of separation conditions for GC analysis on monolithic columns and other important aspects of preparation and usage of monolithic capillary columns in GC. A final part of the review discusses the modern trends and possible applications in the future of capillary monolithic columns in GC.     

Capillary columns in liquid chromatography: between conventional columns and microchips

Liquid chromatography on columns with small internal diameters has been reviewed as the intermediate technique between conventional liquid chromatography and microchip separations. The development of micro column separations in the early years has been described, starting with the papers of Horváth and co-workers and Ishii and co-workers, continuing into the first part of the eighties, then making a leap in time to recent innovations with small-bore columns. Based on internal diameters a classification of the different analytical HPLC columns has been suggested. The advantages of small-bore columns have been discussed, with particular emphasis on the advantage of coupling to concentration sensitive detectors when the sample amount is limited. Open tubular columns are treated as a part of the historic background. The recent developments include a brief look into the current status of monolithic columns, the use of packed nano columns and micro columns with electrospray mass spectrometry, and the potential of two-dimensional comprehensive liquid chromatography. Finally, the coupling of sample preparation to analytical columns and the future applications of the novel technological improvements to the microchip separation methods have been discussed.     

An Introduction to Monolithic Disks as Stationary Phases for High Performance Biochromatography

Monolithic stationary phases have revolutionized protein chromatography because they combine speed, capacity, and resolution in a unique manner. Since such stationary phases contain no particles but only flow‐through pores, the usual mass transfer restrictions to the chromatography of large molecules are not observed and extremely fast separations become possible. Recently the area of application of monolith chromatography has been extended to the separation and analysis of small molecules and plasmid DNA. This review summarizes the state of art in high performance monolith and especially high performance monolithic disk chromatography (HPMDC). The current understanding of the theory of protein HPMDC is summarized, while an introduction to the evolving field of small molecule HPMDC is attempted. The basic differences between the monolithic disks and columns packed with conventional stationary phases (including perfusion and micropellicular particles) but also monolithic columns (porous rods) are outlined. Finally, the potential of HPMDC to analytical and preparative biochromatography is demonstrated by a discussion of recent applications of chromatographic disks for protein isolation and bioprocess analysis.     

Design of the monolithic polymers used in capillary electrochromatography columns

Monolithic columns for capillary electrochromatography (CEC) are receiving quite remarkable attention. Both the simplicity of the in situ preparation and the large number of readily available chemistries make the monolithic separation media a vital alternative to capillary columns packed with particulate materials. This review summarizes the current state-of-the-art in this rapidly growing area of CEC with a focus on monolithic capillary columns prepared from synthetic polymers. Recent achievements in column technologies for both high-performance liquid chromatography and capillary electrophoresis are used as the starting point to highlight the influence of these well established analytical methods on the development of monolithic capillary columns for CEC. The effects of individual variables on the separation properties of monolithic capillaries are discussed in detail. The analytical potential of these columns is demonstrated with separations involving various families of compounds in different chromatographic modes.     

Characterization of monolithic columns for HPLC

Monolithic stationary phases and columns have rapidly become highly popular separation media for liquid chromatography, in spite of their recent discovery. However, their most important features have not yet been completely clarified. A complete understanding of their performance and of their intrinsic characteristics will require the systematic acquisition of many series of reliable experimental data and their consistent analysis from different points of view. Progress in their design and production requires now that the chromatographic behavior of monolithic columns be studied in close connection with their physico-chemical and structural properties. The main goal of this review is to summarize fundamental information on some physico-chemical and chromatographic characteristics of monolithic stationary phases and columns for RPLC. The material reviewed deals only with silica-based monolithic columns. First, structural information on the porosities and the size of the pores in monolithic columns is reported. Second, results of chromatographic studies that deal with the characterization of monolithic columns are summarized. Third, results of detailed studies made on the adsorption equilibrium and the surface heterogeneity of monolithic stationary phases are presented. Finally, results on the mass transfer kinetics in monolithic columns derived from the applications of the classical random-walk model and of the moment theory to a new model of the monolith are discussed.     

Polymethacrylate monolithic columns for capillary liquid chromatography

In recent years, continuous separation media have attracted considerable attention because of the advantages they offer over packed columns. This research resulted in two useful monolithic material types, the first based on modified silica gel and the second on organic polymers. This work attempts to review advances in the development, characterization, and applications of monolithic columns based on synthetic polymers in capillary chromatography, with the main focus on monolithic beds prepared from methacrylate-ester based monomers. The polymerization conditions used in the production of polymethacrylate monolithic capillary columns are surveyed, with attention being paid to the concentrations of monomers, porogen solvents, and polymerization initiators as the system variables used to control the porous and hydrodynamic properties of the monolithic media. The simplicity of their preparation as well as the possibilities of controlling of their porous properties and surface chemistries are the main benefits of the polymer monolithic capillary columns in comparison to capillary columns packed with particulate materials. The application areas considered in this review concern mainly separations in reversed-phase chromatography, ion-exchange chromatography, hydrophobic and hydrophilic interaction modes; enzyme immobilization and sample preparation in the capillary chromatography format are also addressed.     

整体柱离子色谱的研究进展

该文介绍了离子色谱的分类,整体柱的分类、制备及特点,并以此为依据归纳总结了常规整体柱在离子色谱中的应用和毛细管整体柱在毛细管离子色谱中的应用,其中包括硅胶基质整体柱和聚合物基质整体柱,评述并展望了整体柱离子色谱的发展前景.     

Monolithic chromatography for elemental and speciation analysis

Monolithic supports are increasingly used in the field of chromatography. They are appropriate for different applications (e.g., separation of biomolecules, organic acids and inorganic anions). However, only a few research groups are investigating the potential of using monolithic phases for rapid separation of metal cations and elemental speciation analysis.Monolithic supports based on porous monolithic silica have been successfully applied in separation of alkaline-earth and transition-metal cations in environmental waters and high ionic-strength samples.The present review covers applications of monolithic supports for chromatographic separation of metal cations and the potential for using monolithic chromatography in elemental speciation analysis. We critically evaluate the performances and the advantages of monolithic supports and compare them to conventional particle-packed chromatographic supports.     

Comparison of the efficiency of microparticulate and monolithic capillary columns

A comparison is made between the efficiency of microparticulate capillary columns and silica and polymer-based monolithic capillary columns in the pressure-driven (high-performance liquid chromatography) and electro-driven (capillary electrochromatography) modes. With packed capillary columns similar plate heights are possible as with conventional packed columns. However, a large variation is observed in the plate heights for individual columns. This can only be explained by differences in the quality of the packed bed. The minimum plate height obtained with silica monolithic capillary columns in the HPLC mode is approximately 10 microm, which is comparable to that of columns packed with 5-microm particles. The permeability of wide-pore silica monoliths was found to be much higher than that of comparable microparticulate columns, which leads to much lower pressure drops for the same eluent at the same linear mobile phase velocity. For polymer-based monolithic columns (acrylamide, styrene/divinyl benzene, methacrylate, acrylate) high efficiencies have been found in the CEC mode with minimum plate heights between 2 and 10 microm. However, in the HPLC mode minimum plate heights in the range of 10 to 25 microm have been reported.     

新型碳纳米管色谱固定相制备的研究进展

碳纳米管（CNTs）作为一种新型的功能材料,具有优异的物理、化学和机械性能,已经在分析化学领域得到了广泛的关注和应用。通过填充法或原位化学气相沉积法,可制备CNTs气相色谱固定相;将CNTs沉积在硅胶微球或有机聚合物基质微球表面,可制备填充式CNTs液相色谱固定相;通过包埋共聚法将CNTs嵌入聚合物整体柱内,可制备毛细管CNTs液相色谱整体柱。本文主要综述了近年来CNTs（单壁碳纳米管和多壁碳纳米管）用于色谱固定相制备的研究现状,包括气相色谱及液相色谱,并对该领域今后的发展进行展望。     

Monolithic bed structure for capillary liquid chromatography

Monolithic stationary phases show promise for LC as a result of their good permeability, ease of preparation and broad selectivity. Inorganic silica monoliths have been extensively studied and applied for separation of small molecules. The presence of a large number of through pores and small skeletal structure allows the chromatographic efficiencies of silica monoliths to be comparable to columns packed with 5 μm silica particles, at much lower back pressure. In comparison, organic polymeric monoliths have been mostly used for separation of bio-molecules; however, recently, applications are expanding to small molecules as well. Organic monoliths with high surface areas and fused morphology rather than conventional globular morphology have shown good performance for small molecule separations. Factors such as domain size, through-pore size and mesopore size of the monolithic structures have been found to govern the efficiency of monolithic columns. The structure and performance of monolithic columns are reviewed in comparison to particle packed columns. Studying and characterizing the bed structures of organic monolithic columns can provide great insights into their performance, and aid in structure-directed synthesis of new and improved monoliths.     

Properties of monolithic silica columns for HPLC.

Monolithic silica columns and their use in high peak-capacity HPLC separations are reviewed. Monolithic silica columns can potentially provide higher overall performance than particle-packed columns based on the variable external porosity and variable through-pore size/skeleton size ratios. The high permeability of monolithic silica columns resulting from the high porosity is shown to be advantageous to generate large numbers of theoretical plates with long capillary columns. High permeability together with the high stability of the network structures of silica allows their use in high-speed separations required for a second-dimension column in two dimensional HPLC. Disadvantages of monolithic silica columns are also described.     

Porous Monoliths: Stationary Phases of Choice for High Performance Liquid Chromatography in Various Formats

 Modern porous monoliths have been conceived as a new class of stationary phases for high performance liquid chromatography (HPLC) in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are prepared using simple processes carried out in an external mold (inorganic monoliths) or within the confines of the column (organic monoliths and all capillary columns). These methods afford macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, the convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, the monolithic columns perform well even at very high flow rates. The applications of monolithic capillary columns are demonstrated on numerous separations in the HPLC mode.     

整体柱制备技术的新进展及其在蛋白质组学中的应用

整体柱是通过在柱管内原位聚合或固化的方法制备得到的具有多孔结构的整体棒状固定相,与传统的填充柱相比,具有通透性好、传质速率快、容易制备等优点,因此在分离分析领域特别是生物分离分析中发挥的作用日益增大。整体柱的制备及应用近年来也得到了快速发展,层出不穷的新型整体柱已被广泛用于色谱高效分离分析、固相萃取及酶反应器等方面,大大推动了分离分析科学的发展。本文主要总结了近五年来整体柱的制备技术及其在蛋白质组学应用中的一些最新研究进展。     

Monolithic Molecularly Imprinted Columns for Chromatographic Separation

Monolithic molecularly imprinted columns are a new class of column that emerged in the early 1990s. These monolithic materials are typically prepared directly inside stainless steel columns or capillary columns without the tedious procedures of grinding, sieving, and column packing. Furthermore, the preparation of this type of MIP is more cost-efficient, because the amount of template molecules required is much lower. In recent years monolithic supports as stationary phases in high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) have attracted significant interest because of their ease of preparation, high reproducibility, versatile surface chemistry, and rapid mass transport.     

Rapid isolation of omega‐3 long‐chain polyunsaturated fatty acids using monolithic high performance liquid chromatography columns

Eicosapentaenoic and docosahexaenoic acids are important bio‐active fatty acids in fish oils. Monolithic HPLC columns both in the polymeric cation exchange (silver‐ion) and RP formats were compared with corresponding packed columns for the isolation of these acids from tuna oil ethyl esters. Monolithic columns in both formats enabled rapid (typically 5–10 min) separations compared with packed columns (30 min). Polymeric monolithic silver‐ion disc column rapidly furnished mixtures of eicosapentaenoic and docosahexaenoic esters (90% purity) within 5–10 min, but was unable to resolve individual esters. A preparative version of the same column (80 mL bed volume) enabled isolation (>88% purity) of 100 mg quantities of eicosapentaenoic and docosahexaenoic esters from esterified tuna oil within 6 min. Baseline separation of eicosapentaenoic and docosahexaenoic esters was achieved on all RP columns. The results show that there is potential to use polymeric monolithic cation exchange columns for scaled‐up preparation of eicosapentaenoic and docosahexaenoic ester concentrates from fish oils.     

Advances in capillary electrochromatography and micro-high performance liquid chromatography monolithic columns for separation science

Over the last decade, monoliths or continuous beds have emerged as an alternative to traditional packed-bed columns for use in capillary electrochromatography (CEC) and micro-high performance liquid chromatography (micro-HPLC). Monolithic columns can be divided into two categories: silica-based monolithic columns and rigid organic polymer-based monolithic columns resulting from the polymerization of acrylamide, styrene, acrylate or methacrylate monomers. In this paper, the chemistry and most recent applications of these various types of monoliths in both CEC and micro-HPLC are presented.