溴代烷烃在紫外波段的光解离过程

在飞行时间质谱仪中，采用波长为234 nm和267 nm的激光，研究溴代烷烃CHBr3、CH2Br2、C2H5Br及C2H4Br2的光离解过程.在UV激光的作用下，溴代烷烃分子主要发生的是吸收1个光子解离出Br原子，然后继续吸收光子发生Br原子的（2＋1）共振增强多光子电离的过程.其中由溴代烷烃分子解离得到的Br原子可能存在着两种布居：基态Br(2P03/2)及激发态Br*(2P01/2).研究解离得到的Br原子的分支比 N(Br*)/N(Br)，并给出测量结果：溴代烷烃分子解离得到的Br原子在267 nm激光作用下的分支比明显大于在234 nm激光作用下的结果.对此多光子过程的机理，也进行了分析讨论.     

Dissociation dynamics of fluorinated ethene cations: from time bombs on a molecular level to double-regime dissociators

The dissociative photoionization mechanism of internal energy selected C(2)H(3)F(+), 1,1-C(2)H(2)F(2)(+), C(2)HF(3)(+) and C(2)F(4)(+) cations has been studied in the 13-20 eV photon energy range using imaging photoelectron photoion coincidence spectroscopy. Five predominant channels have been found; HF loss, statistical and non-statistical F loss, cleavage of the C-C bond post H or F-atom migration, and cleavage of the C=C bond. By modelling the breakdown diagrams and ion time-of-flight distributions using statistical theory, experimental 0 K appearance energies, E(0), of the daughter ions have been determined. Both C(2)H(3)F(+) and 1,1-C(2)H(2)F(2)(+) are veritable time bombs with respect to dissociation via HF loss, where slow dissociation over a reverse barrier is followed by an explosion with large kinetic energy release. The first dissociative ionization pathway for C(2)HF(3) and C(2)F(4) involves an atom migration across the C=C bond, giving CF-CHF(2)(+) and CF-CF(3)(+), respectively, which then dissociate to form CHF(2)(+), CF(+) and CF(3)(+). The nature of the F-loss pathway has been found to be bimodal for C(2)H(3)F and 1,1-C(2)H(2)F(2), switching from statistical to non-statistical behaviour as the photon energy increases. The dissociative ionization of C(2)F(4) is found to be comprised of two regimes. At low internal energies, CF(+), CF(3)(+) and CF(2)(+) are formed in statistical processes. At high internal energies, a long-lived excited electronic state is formed, which loses an F atom in a non-statistical process and undergoes statistical redistribution of energy among the nuclear degrees of freedom. This is followed by a subsequent dissociation. In other words only the ground electronic state phase space stays inaccessible. The accurate E(0) of CF(3)(+) and CF(+) formation from C(2)F(4) together with the now well established Δ(f)H(o) of C(2)F(4) yield self-consistent enthalpies of formation for the CF(3), CF, CF(3)(+) and CF(+) species.     

Understanding the complex dissociation dynamics of energy selected dichloroethylene ions: neutral isomerization energies and heats of formation by imaging photoelectron-photoion coincidence

The dissociative photoionization of 1,1-C(2)H(2)Cl(2), (E)-1,2-C(2)H(2)Cl(2), and (Z)-1,2-C(2)H(2)Cl(2) has been investigated at high energy and mass resolution using the imaging photoelectron photoion coincidence instrument at the Swiss Light Source. The asymmetric Cl-atom loss ion time-of-flight distributions were fitted to obtain the dissociation rates in the 10(3) s(-1) < k < 10(7) s(-1) range as a function of the ion internal energy. The results, supported by ab initio calculations, show that all three ions dissociate to the same C(2v) symmetry ClC═CH(2)(+) product ion. The 0 K onset energies thus establish the relative heats of formation of the neutral isomers, that is, the isomerization energies. The experimental rate constants, k(E), as well as ab initio calculations indicate an early isomerization transition state and no overall reverse barrier to dissociation. The major high energy channels are the parallel HCl loss and the sequential ClC═CH(2)(+) → HCCH(+) + Cl process, the latter in competition with a ClC═CH(2)(+) → ClCCH(+) + H reaction. A parallel C(2)H(2)Cl(2)(+) → C(2)HCl(2)(+) + H channel also weakly asserts itself. The 0 K onset energy for the sequential Cl loss reaction suggests no barrier to the production of the most stable acetylene ion product; thus the sequential Cl-atom loss is preceded by a ClC═CH(2)(+) → HC(Cl)CH(+) reorganization step with a barrier lower than that of the second Cl-atom loss. The breakdown diagram corresponding to this sequential dissociation reveals the internal energy distribution of the first C(2)H(2)Cl(+) daughter ion, which is determined by the kinetic energy release in the first, Cl loss reaction at high excess energies. At low kinetic energy release, this distribution corresponds to the predicted two translational degrees of freedom, whereas at higher energies, the excess energy partitioning is characteristic of only one translational degree of freedom. New Δ(f)H(o)(298K) of 3.7, 2.5, and 0.2 ± 1.75 kJ mol(-1) are proposed for 1,1-C(2)H(2)Cl(2), (E)-1,2-C(2)H(2)Cl(2), and (Z)-1,2-C(2)H(2)Cl(2), respectively, and the proton affinity of ClCCH is found to be 708.6 ± 2.5 kJ mol(-1).     

Photodissociation dynamics of CH(2)Br(2) near 234 and 267 nm

The photodissociation dynamics of CH(2)Br(2) was investigated near 234 and 267 nm. A two-dimensional photofragment ion velocity imaging technique coupled with a [2+1] resonance-enhanced multiphoton (REMPI) ionization scheme was utilized to obtain the angular and translational energy distributions of the nascent Br ((2)P(3/2)) and Br* ((2)P(1/2)) atoms. The obtained translational energy distributions of Br and Br* are found consist of two components which should be come from the radical channel and secondary dissociation process, respectively. It is suggested that the symmetry reduction from C(2v) to C(s) during photodissociation invokes a non-adiabatic coupling between the 2B(1) and A(1) states. Consequently, the higher internal energy distribution of Br channel than Br* formation channel and the broader translational energy distribution of the former are presumed correlate with a variety of vibrational excitation disposal at the crossing point resulting from the larger non-adiabatic crossing from 2B(1) to A(1) state than the reverse crossing. Moreover, the measured anisotropy parameter beta indicate that fragments recoil along the Br-Br direction mostly in the photodissociation.     

Photodissociation study of ethyl bromide in the ultraviolet range by the ion-velocity imaging technique.

The photodissociation of ethyl bromide has been studied in the wavelength range of 231-267 nm by means of the ion velocity imaging technique coupled with a [2+1] resonance-enhanced multiphoton ionization (REMPI) scheme. The velocity distributions for the Br ((2)P(1/2)) (denoted Br*) and Br ((2)P(3/2)) (denoted Br) fragments are determined, and each can be well-fitted by a narrow single-peaked Gaussian curve, which suggests that the bromine fragments are generated as a result of direct dissociation via repulsive potential-energy surfaces (PES). The recoil anisotropy results show that beta(Br) and beta(Br*) decrease with the wavelength, and the angular distributions of Br* suggest a typical parallel transition. The product relative quantum yields at two different wavelengths are Phi(234nm)(Br*)=0.17 and Phi(267nm)(Br*)=0.31. The relative fractions of each potential surface for the bromine fragments' production at 234 and 267 nm reveal the existence of a curve crossing between the (3)Q(0) and (1)Q(1) potential surfaces, and the probability of curve crossing decreases with the laser wavelength. The symmetry reduction of C(2)H(5)Br from C(3v) to C(s) invokes a nonadiabatic coupling between the (3)Q(0) and (1)Q(1) states, and with higher energy photons, the probability that crossing will take place increases.     

Isomeric effects in the gas-phase reactions of dichloroethene, C2H2CL2, with a series of cations

A study of the reactions of a series of gas-phase cations (NH(4)(+), H(3)O(+), SF(3)(+), CF(3)(+), CF(+), SF(5)(+), SF(2)(+), SF(+), CF(2)(+), SF(4)(+), O(2)(+), Xe(+), N(2)O(+), CO(2)(+), Kr(+), CO(+), N(+), N(2)(+), Ar(+), F(+), and Ne(+)) with the three structural isomers of dichloroethene, i.e., 1,1-C(2)H(2)Cl(2), cis-1,2-C(2)H(2)Cl(2), and trans-1,2-C(2)H(2)Cl(2) is reported. The recombination energy (RE) of these ions spans the range of 4.7-21.6 eV. Reaction rate coefficients and product branching ratios have been measured at 298 K in a selected ion flow tube (SIFT). Collisional rate coefficients are calculated by modified average dipole orientation (MADO) theory and compared with experimental data. Thermochemistry and mass balance have been used to predict the most feasible neutral products. Threshold photoelectron-photoion coincidence spectra have also been obtained for the three isomers of C(2)H(2)Cl(2) with photon energies in the range of 10-23 eV. The fragment ion branching ratios have been compared with those of the flow tube study to determine the importance of long-range charge transfer. A strong influence of the isomeric structure of dichloroethene on the products of ion-molecule reactions has been observed for H(3)O(+), CF(3)(+), and CF(+). For 1,1-C(2)H(2)Cl(2) the reaction with H(3)O(+) proceeds at the collisional rate with the only ionic product being 1,1-C(2)H(2)Cl(2)H(+). However, the same reaction yields two more ionic products in the case of cis-1,2- and trans-1,2-C(2)H(2)Cl(2), but only proceeds with 14% and 18% efficiency, respectively. The CF(3)(+) reaction proceeds with 56-80% efficiency, the only ionic product for 1,1-C(2)H(2)Cl(2) being C(2)H(2)Cl(+) formed via Cl(-) abstraction, whereas the only ionic product for both 1,2-isomers is CHCl(2)(+) corresponding to a breaking of the C=C double bond. Less profound isomeric effects, but still resulting in different products for 1,1- and 1,2-C(2)H(2)Cl(2) isomers, have been found in the reactions of SF(+), CO(2)(+), CO(+), N(2)(+), and Ar(+). Although these five ions have REs above the ionization energy (IE) of any of the C(2)H(2)Cl(2) isomers, and hence the threshold for long-range charge transfer, the results suggest that the formation of a collision complex at short range between these ions and C(2)H(2)Cl(2) is responsible for the observed effects.     

离子速度影像法研究n-C7H15Br分子光解反应动力学

利用离子速度成像方法, 研究n-C7H15Br分子在231～239 nm范围内几个波长处的光解离动力学. 通过同一束激光经(2+1)共振多光子电离(REMPI)过程探测光解碎片Br(2P3/2)和Br*(2P1/2), 得到了不同激光波长处的离子速度分布图像, 从而获得C7H15Br光解产物的能量分配和角度分布. 结合各向异性参数和量子产率, 计算了n-C7H15Br分子在234 nm波长下不同解离通道的比例. 实验表明光解产物的能量分配可以用冲击模型中的软碰撞模型来解释. 实验还发现, 各向异性参数β(Br*)的值对光波长变化很敏感, 这是由电子激发态的绝热和非绝热过程决定的.     

Coherent control of the ultrafast dissociative ionization dynamics of bromochloroalkanes

We report on the coherent control of the ultrafast ionization and fragmentation dynamics of the bromochloroalkanes C(2)H(4)BrCl and C(3)H(6)BrCl using shaped femtosecond laser pulses. In closed-loop control experiments on bromochloropropane (C(3)H(6)BrCl) the fragment ion yields of CH(2)Cl(+), CH(2)Br(+), and C(3)H(3)(+) are optimized with respect to that of the parent cation C(3)H(6)BrCl(+). The fragment ion yields are recorded in additional experiments in order to reveal the energetics of cation fragmentation, where laser-produced plasma radiation is used as a tunable pulsed nanosecond vacuum ultraviolet radiation source along with photoionization mass spectrometry. The time structure of the optimized femtosecond laser pulses leads to a depletion of the parent ion and an enhancement of the fragment ions, where a characteristic sequence of pulses is required. Specifically, an intense pump pulse is followed by a less intense probe pulse where the delay is 0.5 ps. Similarly optimized pulse shapes are obtained from closed-loop control experiments on bromochloroethane (C(2)H(4)BrCl), where the fragment ion yield of CH(2)Br(+) is optimized with respect to that of C(2)H(4)BrCl(+) as well as the fragment ion ratios C(2)H(2)(+)/CH(2)Br(+) and C(2)H(3)(+)/C(2)H(4)Cl(+). The assignment of the underlying control mechanism is derived from one-color 804 nm pump-probe experiments, where the yields of the parent cation and several fragments show broad dynamic resonances with a maximum at Δt = 0.5 ps. The experimental findings are rationalized in terms of dynamic ionic resonances leading to an enhanced dissociation of the parent cation and some primary fragment ions.     

1,2-Dibromoethane on Cu(100): bonding structure and transformation to C2H4

Temperature-programmed reaction/desorption, mass spectrometry, reflection-absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and density functional theory calculations have been employed to explore the reaction and bonding structure of 1,2-C(2)H(4)Br(2) on Cu(100). Both the trans and gauche conformers are found to dissociate by breaking the C-Br bonds on clean Cu(100) at 115 K, forming C(2)H(4) and Br atoms. Theoretical investigations for the possible paths of 1,2-C(2)H(4)Br(2) → C(2)H(4) + 2Br on Cu(100) suggest that the barriers of the trans and gauche molecules are in the ranges of 0-4.2 and 0-6.5 kcal/mol, respectively. The C-Br scission temperature of C(2)H(4)Br(2) is much lower than that (~170 K) of C(2)H(5)Br on Cu(100). Adsorbed Br atoms can decrease the dissociation rate of the 1,2-C(2)H(4)Br(2) molecules impinging the surface. The 1,2-C(2)H(4)Br(2) molecules adsorbed in the first monolayer are structurally distorted. Both the trans and gauche molecules exist in the second monolayer, but with no preferential adsorption orientation. However, the trans molecule is the predominant species in the third or higher layer formed at 115 K. The layer structure is not thermally stable. Upon heating the surface to 150 K, the orientation of the trans 1,2-C(2)H(4)Br(2) molecules in the layer changes, leading to the rotation of the BrCCBr skeletal plane toward the surface normal on average and the considerable growth of the CH(2) scissoring peak. On oxygen-precovered Cu(100), decomposition of 1,2-C(2)H(4)Br(2) to form C(2)H(4) is hampered and no oxygenated hydrocarbons are formed. The presence of the oxygen atoms also increases the adsorption energy of the second-layer molecules.     

The dynamics of Br(2Pj) formation in the photodissociation of vinyl and perfluorovinyl bromides

The photodissociation dynamics of vinyl bromide and perfluorovinyl bromide have been investigated at 234 nm using a photofragment ion imaging technique coupled with a state-selective [2+1] resonance-enhanced multiphoton ionization scheme. The nascent Br atoms stem from the primary C-Br bond dissociation leading to the formation of C2H3(X) and Br(2Pj;j=1/2,3/2). The obtained translational energy distributions have been well fitted by a single Boltzmann and three Gaussian functions. Boltzmann component has not been observed in the perfluorovinyl bromide. The repulsive 3A'(n,sigma *) state has been considered as the origin of the highest Gaussian components. Middle translational energy components with Gaussian shapes are produced from the 1A"(pi,sigma*) and/or 3A"(pi,sigma*) which are very close in energy. Low-energy Gaussian components are produced via predissociation from the 3A'(pi,pi*) state. The assignments have also been supported by the recoil anisotropy corresponding to the individual components. It is suggested that intersystem crossing from the triplet states to the ground state has been attributed to the Boltzmann component and the fluorination reduces the probability of this electronic relaxation process.     

Direct observation of the primary and secondary C-Br bond cleavages from the 1,2-dibromopropane photodissociation at 234 and 265 nm using the velocity map ion imaging technique

Photodissociation dynamics of 1,2-dibromopropane has been investigated at 234 and 265 nm by using the velocity map ion imaging method. At both pump energies, a single Gaussian-shaped speed distribution is observed for the Br*((2)P(1/2)) fragment, whereas at least three velocity components are found to be existent for the Br((2)P(3/2)) product. The secondary C-Br bond cleavage of the bromopropyl radical which is energized from the ultrafast primary C-Br bond rupture should be responsible for the multicomponent translational energy distribution at the low kinetic energy region of Br((2)P(3/2)). The recoil anisotropy parameter (beta) of the fragment from the primary C-Br bond dissociation is measured to be 0.53 (0.49) and 1.26 (1.73) for Br((2)P(3/2)) and Br*((2)P(1/2)), respectively, at 234 (265) nm. The beta value of Br((2)P(3/2)) from the secondary C-Br bond dissociation event at 265 nm is found to be 0.87, reflecting the fact that the corresponding Br((2)P(3/2)) fragment carried the initial vector component of the bromopropyl radical produced from the primary bond dissociation event. Density functional theory has been used to calculate energetics involved both in the primary and in the secondary C-Br bond dissociation dynamics.     

Site and isotopic effects on the angular anisotropy of products in the photodissociation of ethene at 157 nm

We measured angular-anisotropy parameters beta(E(t)) of fragments from photolysis of ethene and four isotopic variants at 157 nm using photo-fragment translational spectroscopy and selective photoionization. The averaged beta value of products ranges from -0.17 to 0.10, depending on dissociation pathways. Angular distributions of atomic hydrogen produced from C(2)H(4) and C(2)D(4) are isotropic. For dissociation into C(2)H(2) + H(2), beta has a small negative value whereas dissociation into C(2)D(2) + D(2) has an isotropic angular distribution. The photolysis of dideuterated ethene reveals site and isotopic effects on the angular distributions of products; products H(2), HD, and D(2) from photolysis of 1,1-CH(2)CD(2) have negative, nearly zero, and positive values of beta, respectively. Molecular hydrogen from photolysis of 1,2-cis-CHDCHD has a negative beta value and the anisotropy has a trend D(2) > H(2) > HD. Photolysis of 1,2-trans-CHDCDH produced a result similar to photolysis of 1,2-cis-CHDCHD for the angular anisotropy of molecular hydrogen except slightly more isotropic. A calculation of optimized geometries of ethene in the ground electronic state and pertinent transition structures enables a qualitative interpretation of the site and isotopic effects on the angular anisotropy of products. We deduce that the photoexcited state of ethene at 157 nm has a major character (1)B(1u) that produces a transition dipolar moment parallel to the C=C bond.     

Photodissociation dynamics of 3-bromo-1,1,1-trifluoro-2-propanol and 2-(bromomethyl) hexafluoro-2-propanol at 234 nm: resonance-enhanced multiphoton ionization detection of Br (2P(j))

The photodissociation dynamics of 3-bromo-1,1,1-trifluoro-2-propanol (BTFP) and 2-(bromomethyl) hexafluoro-2-propanol (BMHFP) have been studied at 234 nm, and the C-Br bond dissociation investigated using resonance-enhanced multiphoton ionization coupled with time-of-flight mass spectrometer (REMPI-TOFMS). Br formation is a primary process and occurs on a repulsive surface involving the C-Br bond of BTFP and BMHFP. Polarization dependent time-of-flight profiles were measured, and the translational energy distributions and recoil anisotropy parameters extracted using forward convolution fits. A strong polarization dependence of time-of-flight profiles suggest anisotropic distributions of the Br((2)P(3/2)) and Br((2)P(1/2)) fragments with anisotropy parameter, β, of respectively 0.5 ± 0.2 and 1.2 ± 0.2 for BTFP, and 0.4 ± 0.1 and 1.0 ± 0.3 for BMHFP. The measured velocity distributions consist of a single velocity component. The average translational energies for the Br((2)P(3/2)) and Br((2)P(1/2)) channels are 9.2 ± 1.0 and 7.4 ± 0.9 kcal/mol for BTFP, and 15.4 ± 1.8 and 15.1 ± 2.0 kcal/mol for BMHFP. The relative quantum yields of Br((2)P(3/2)) and Br((2)P(1/2)), which are 0.70 ± 0.14 and 0.30 ± 0.06 in BTFP and 0.81 ± 0.16 and 0.19 ± 0.04 in BMHFP, indicate that the yield of the former is predominant. The measured anisotropy parameters for the Br((2)P(3/2)) and Br((2)P(1/2)) channels suggest that the former channel has almost equal contributions from both the parallel and the perpendicular transitions, whereas the latter channel has a significant contribution from a parallel transition. Non-adiabatic curve crossing plays an important role in the C-Br bond dissociation of both BTFP and BMHFP. The estimated curve crossing probabilities suggest a greater value in BTFP, which explains a greater observed value of the relative quantum yield of Br((2)P(1/2)) in this case.     

溴乙烷光电离解离的理论计算和实验

分子的电离电势、键能和离子的标准生成焓等都是非常重要的物理化学数据,它们对化学反应机理等研究有很大帮助,精确测定离子的出现势,就可以获得这些热力学常数.迄今为止,有关溴乙烷(Ｃ2Ｈ5Ｂｒ)电离解离过程的研究已有若干报导[1-3],但这些结果均是在常温条件下,用电子轰击电离、彭宁电离或真空紫外灯辐照等方法获得的,由于常伴有热带效应、离子分子反应、离子对形成等过程[4],其结果的准确性往往较差.本文首次报导使用同步辐射光源对Ｃ2Ｈ5Ｂｒ进行光电离解离研究.通过准确测量母体离子以及几种主要碎片离子的出现势,结合已有的公认的热力…     

Laser-induced UV photodissociation of 2-bromo-2-nitropropane: dynamics of OH and Br formation

Photoexcitation of 2-bromo-2-nitropropane (BNP) at 248 and 193 nm generates OH, Br, and NO(2) among other products. The OH fragment is detected by laser-induced fluorescence spectroscopy, and its translational and internal state distributions (vibration, rotation, spin-orbit, and Λ-doubling components) are probed. At both 248 and 193 nm, the OH fragment is produced translationally hot with the energy of 10.8 and 17.2 kcal∕mol, respectively. It is produced vibrationally cold (v" = 0) at 248 nm, and excited (v" = 1) at 193 nm with a vibrational temperature of 1870 ± 150 K. It is also generated with rotational excitation, rotational populations of OH(v" = 0) being characterized by a temperature of 550 ± 50 and 925 ± 100 K at 248 and 193 nm excitation of BNP, respectively. The spin-orbit components of OH(X(2)Π) are not in equilibrium on excitation at 193 nm, but the Λ-doublets are almost in equilibrium, implying no preference for its π lobe with respect to the plane of rotation. The NO(2) product is produced electronically excited, as detected by measuring UV-visible fluorescence, at 193 nm and mostly in the ground electronic state at 248 nm. The Br product is detected employing resonance-enhanced multiphoton ionization with time-of-flight mass spectrometer for better understanding of the dynamics of dissociation. The forward convolution analysis of the experimental data has provided translational energy distributions and anisotropy parameters for both Br((2)P(3∕2)) and Br?((2)P(1∕2)). The average translational energies for the Br and Br? channels are 5.0 ± 1.0 and 6.0 ± 1.5 kcal∕mol. No recoil anisotropies were observed for these products. Most plausible mechanisms of OH and Br formation are discussed based on both the experimental and the theoretical results. Results suggest that the electronically excited BNP molecules at 248 and 234 nm relax to the ground state, and subsequently dissociate to produce OH and Br through different channels. The mechanism of OH formation from BNP on excitation at 193 nm is also discussed.     

Br2 molecular elimination in photolysis of (COBr)2 at 248 nm by using cavity ring-down absorption spectroscopy: a photodissociation channel being ignored

A primary dissociation channel of Br(2) elimination is detected following a single-photon absorption of (COBr)(2) at 248 nm by using cavity ring-down absorption spectroscopy. The technique contains two laser beams propagating in a perpendicular configuration. The tunable laser beam along the axis of the ring-down cell probes the Br(2) fragment in the B(3)Π(ou)(+)-X(1)Σ(g)(+) transition. The measurements of laser energy- and pressure-dependence and addition of a Br scavenger are further carried out to rule out the probability of Br(2) contribution from a secondary reaction. By means of spectral simulation, the ratio of nascent vibrational population for v = 0, 1, and 2 levels is evaluated to be 1:(0.65 ± 0.09):(0.34 ± 0.07), corresponding to a Boltzmann vibrational temperature of 893 ± 31 K. The quantum yield of the ground state Br(2) elimination reaction is determined to be 0.11 ± 0.06. With the aid of ab initio potential energy calculations, the pathway of molecular elimination is proposed on the energetic ground state (COBr)(2) via internal conversion. A four-center dissociation mechanism is followed synchronously or sequentially yielding three fragments of Br(2) + 2CO. The resulting Br(2) is anticipated to be vibrationally hot. The measurement of a positive temperature effect supports the proposed mechanism.     

Photodissociation study of 1,3-dibromopropane at 234 nm via an ion velocity imaging technique

The photodissociation of 1,3-dibromopropane has been studied at 234 nm using a 2D photofragment ion velocity imaging technique coupled with a [2 + 1] resonance-enhanced multiphoton ionization scheme. The velocity distributions for the Br (2P1/2) (denoted Br) and Br (2P3/2) (denoted Br) fragments are determined, and each can be fitted by a narrow single-peaked Gaussian curve, suggesting that bromine fragments are generated as a result of direct dissociation via repulsive potential energy surfaces. The recoil anisotropies were measured to be beta = 0.80 for Br and 1.31 for Br, and the product relative quantum yields at 234 nm is Phi234 nm(Br) = 0.21.     

DFT study of the fragmentation mechanism of uracil RNA base

The fragmentation process of the uracil RNA base has been investigated via DFT calculations in order to assign fragments to the ionisation mass spectrum obtained after dissociation induced by collision experiments. The analysis of the electronic distribution and geometry parameters of the cation allows selection of several bonds that may be cleaved and lead to the formation of various fragments. Differences are observed in the electronic behaviour of the bond breaking as well as the energy required for the cleavage. It is reported that N(3)-C(4) and N(1)-C(2) bonds are more easily cleaved than the C(5)-C(6) bond, since the corresponding energy barriers amount to ΔG = +1.627, +1.710, +5.459 eV, respectively, which makes the C(5)-C(6) bond cleavage almost prohibited. Among all possible formed fragments, the formation of the OCN(+) fragment for the peak at m/z = 42 Da is excluded because of an intermediate that was not observed experimentally and too a large free energy barrier. Based on the required free energy, it is observed that two fragment derivatives: C(2)H(4)N(+) and C(2)H(2)O˙(+) may be formed, with a small preference for C(2)H(4)N(+). This latter product is not formed through a retro Diels Alder reaction in contrast to C(2)H(2)O˙(+). The following sequence is proposed for the peak at 42 Da: C(2)H(4)N(+) (from N(1)-C(2), C(4)-C(5) cleavages) > C(2)H(2)O˙(+) (from N(3)-C(4), N(1)-C(2) and C(5)-C(6) cleavages) > C(2)H(4)N(+) (from N(1)-C(2), N(3)-C(4) and C(4)-C(5)) > C(2)H(2)O˙(+) (from C(5)-C(6), N(1)-C(2) and N(3)-C(4) cleavages) > NCO(+) (from N(1)-C(2), C(4)-C(5) and N(3)-C(4) cleavages). Finally the peak at 28 Da is assigned to CNH(2)(+) derivatives that can be formed through two different paths, the easiest one requiring 5.4 eV.     

离子速度成像方法研究溴代环己烷的紫外光解动力学

利用二维离子速度成像方法对C6H11Br分子在234 nm附近的光解动力学行为进行了研究. 通过(2+1)共振增强多光子电离探测了光解产物Br*(2P1/2)和Br(2P3/2), 得到它们的相对量子产率. 从光解产物Br*(2P1/2)和Br(2P3/2)的速度图像得到了能量和角度分布. 结果表明, Br*原子主要来自于S1态的直接解离, 而Br则绝大部分是从S2态向T3态的系间交叉跃迁得到, 并导致了两种解离通道能量分布的差别. 实验发现C6H11Br分子解离过程中大部分能量都转化为内能, 但与其它长链溴代烷烃分子相比, 可资用能更多地被分配到平动能中, 结合软反冲模型分析了这种能量分配跟环烷基的构象和稳定性的关系.     

Dissociative photoionization of 1,3-butadiene: experimental and theoretical insights

The vacuum-ultraviolet photoionization and dissociative photoionization of 1,3-butadiene in a region ～8.5-17 eV have been investigated with time-of-flight photoionization mass spectrometry using tunable synchrotron radiation. The adiabatic ionization energy of 1,3-butadiene and appearance energies for its fragment ions, C(4)H(5)(+), C(4)H(4)(+), C(4)H(3)(+), C(3)H(3)(+), C(2)H(4)(+), C(2)H(3)(+), and C(2)H(2)(+), are determined to be 9.09, 11.72, 13.11, 15.20, 11.50, 12.44, 15.15, and 15.14 eV, respectively, by measurements of photoionization efficiency spectra. Ab initio molecular orbital calculations have been performed to investigate the reaction mechanism of dissociative photoionization of 1,3-butadiene. On the basis of experimental and theoretical results, seven dissociative photoionization channels are proposed: C(4)H(5)(+) + H, C(4)H(4)(+) + H(2), C(4)H(3)(+) + H(2) + H, C(3)H(3)(+) + CH(3), C(2)H(4)(+) + C(2)H(2), C(2)H(3)(+) + C(2)H(2) + H, and C(2)H(2)(+) + C(2)H(2) + H(2). Channel C(3)H(3)(+) + CH(3) is found to be the dominant one, followed by C(4)H(5)(+) + H and C(2)H(4)(+) + C(2)H(2). The majority of these channels occur via isomerization prior to dissociation. Transition structures and intermediates for those isomerization processes were also determined.