Studies on Synthesis and Effect of Dopants on Conductivity and Morphology of Organically Soluble Poly(o-anisidine)

Synthesis of poly(o-anisidine) doped with various protonic acids by using ammonium persulphate as oxidizing agent were carried out in aqueous acid media. Influences of protonic acids on the physicochemical properties were investigated. The various process parameters were optimized to obtain poly(o-anisidine) in the conducting salt phase form. The results are discussed with references to different protonic acids. It was observed that poly(o-anisidine) is highly soluble in organic solvents, such as m-cresol and N-methyl pyrrolidinone (NMP). The polymers were characterized by UV-Visible, FTIR, SEM, XRD and conductivity measurements. A result shows that, different types of dopant acids HCl, H₂SO₄ and HClO₄ affect the morphology and electrical conductivity of the polymer. The electrical conductivity of the polymer follows the order HCl >H₂SO₄>HClO₄. Thus the effect of dopant ion type and the size of its negative ions influence the physico-chemical properties. UV-Vis absorption spectra shows peaks at 740–783 nm with shoulder at 380–420 nm as characteristic peaks for the emeraldine salt (ES) phase of poly(o-anisidine) POA. The FTIR spectra show a broad and intense band at ～2800–3001 cm^?1 and ～1159–1170 cm^?1 that account for the formation of ES phase of the polymer. The X-ray diffraction spectra show a characteristic peak at 20–30^o, 2θ range which reveals partial crystalline structure. The conductivity of the poly(o-anisidne) salt was found to be in the range of 10^?3 to 10^?2 S/cm. SEM studies of poly(o-anisidine) doped with HCl shows the continuous granular uniform morphology with sub-micrometer evenly distributed particles of size ～100–200 nm.     

Thin‐Film Infrared Spectroscopy of Acetonitrile

Acetonitrile and [D₃]acetonitrile in the vicinal region of a planar AgX fiber contain linear dipole–dipole linked oligomers as shown by 1) comparison of infrared band intensity ratios in the gaseous and condensed phases and 2) remarkable plots of absorbance (C? N stretch) versus time during evaporation from an AgX planar fiber element. The plots (CH₃CN 2252 cm^?1, CD₃CN 2262 cm^?1) reveal the presence of octamers, hexamers, tetramers, and dimers along with some heptamer, trimer, and monomer structures. A novel isotope effect arises from the somewhat smaller size of the CD₃CN resulting in an increase in the CN band intensity. The organized oligomers may be termed pseudocrystals and are the main components responsible for absorption intensity in the infrared spectrum of acetonitrile, on the AgX planar fiber or in an IR cell.     

The T3 (π, π) State of acridine

The 00 band maximum of the transition T₃(π, π^*) ← T₁ (π, π^*) of acridine occurs at ≈ 10200 ± 20 cm^?1 in inert (n-hexane, benzene, CCl₄), at 10220 ± 20 cm^?1 in polar (acetonitrile) and at 10170 ± 50 cm^?1 in hydrogen-bonding (methanol, 2-propanol and alkaline water) solvents. Based on the solvent-independent energy of T₁ (π, π^*), the T₃(π, π^*) state of acridine is estimated at 26050 ± 50 cm^?1 in all the solvents.     

Water complexes with organic solvents in liquid phase. An IR spectroscopic study

An IR spectroscopic investigation indicates the formation of water complexes with organic solvents such as hexafluorobenzene, nitromethane, acetonitrile, and carbon tetrachloride. The IR bands in the 3000-2400 cm⁻¹ region can be assigned to OH-stretching vibrations of an H₂O molecule in complexes with solvents in the liquid phase.     

Spectral characteristics of aqueous dispersions enriched in oxygen

The IR absorption and reflection spectra of aqueous dispersions consisting of (H₂O)_n, O₂(H₂O)_n, and (O₂)₂(H₂O)_n clusters (10 ≤ n ≤ 50) were calculated by the method of molecular dynamics using a flexible model of molecules. The frequency distribution of the power scattered by the cluster systems was obtained in the range 0 ≤ ω ≤ 3000 cm^?1. The capture of one oxygen molecule by the clusters is accompanied by a decrease in the absorption of the low-frequency IR radiation and by a peak of the absorption intensity in the vicinity of ω 2704 cm^?1. This is also accompanied by a decrease in the reflection coefficient throughout the frequency range and a decrease in the emission power at ω < 1030 and ω > 1700 cm^?1. Addition of two oxygen molecules to the clusters decreases the capability of the dispersions for the absorption, reflection, and scattering of IR radiation.     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.     

Synthesis and spectrophotometry study of the acid-base properties of nitro-substituted 5-phenyl-β-octaalkylporphines

10,15-Dinitro-5-phenyl-2,3,7,8,12,13,17,18-octamethylporphine, 10,15,20-trinitro-5-phenyl-2,3,7,8,12,13,17,18-octamethylporphine, and 10,15,20-trinitro-5-(4-nitrophenyl)-2,3,7,8,12,13,17,18-octamethylporphine were synthesized and identified by electronic absorption, IR, and ¹Н NMR spectroscopy. The acid–base properties of the synthesized compounds were studied by spectrophotometric titration in HClO₄–acetonitrile and 1,8-diazabicyclo[5.4.0]undec-7-ene–acetonitrile systems at 298 K. Parameters of the electronic absorption spectra and concentration ranges of existence of the mono- and diprotonated, as well as mono- and dideprotonated forms of the corresponding ligands and the acid and base dissociation constants of the latter were determined. Comparative analysis of the effect of nitro groups on the reactivity of the synthesized compounds was performed.     

乙酸/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在新型混合电解质——乙酸含体积比26%的三氟化硼乙醚和5%的分子量为400的聚乙二醇中直接氧化咔唑制得高质量的聚咔唑膜,导电率为10-2 S·cm-1。在该体系中,咔唑的起始氧化电位相对于饱和甘汞电极只有0.89 V,远低于在含0.1 mol·L-1四氟化硼四丁基铵的乙腈溶液中的1.36V（相对于饱和甘汞电极）。从该体系中获得的聚咔唑膜具有良好的电化学性质和热稳定性,可以部分溶于二甲基亚砜、四氢呋喃等强极性溶剂。荧光光谱表明该体系中获得的聚咔唑膜是一种良好的蓝光发射材料。红外、核磁波谱和理论量子化学计算结果表明,咔唑的电化学聚合主要发生在3,6位。据我们所知,这是利用乙酸三氟化硼乙醚混合电解质进行电化学聚合的首次报道。     

Extraction,Spectrophotometric, and Atomic Absorption Spectrophotometric Determination of Selenium With N-Phenylbenzohydroxamic Acid

Abstract

Solvent extraction spectrophotometric and atomic absorption spectrophotometric methods for the determination of selenium(IV) in microgram quantities are described. The selenium(IV) forms yellow colored complex with N-phenylbenzohydroxamic acid (PBHA) extractable into chloroform from 7 M HClO₄. Se-PBHA complex has maximum absorbance at 345 nm with a molar absorptivity 1.5 × 10⁵ 1 mol^?1 cm^?1 and Sandell's sensitivity 0.000526 μg /cm². Effect of molarity, reagent concentration, diverse ions on the extraction of selenium complex were studied. The selenium is determined in presence of tellurium.     

Aggregation Behaviors of Tricarbocyanine Dye in Water and in AOT Reverse Micelles

The photophysical property of the tricarbocyanine dye IR144 has been extensively studied in non‐aqueous solvents. However, as a potential near‐infrared biomedical imaging probe, the photophysical property of IR144 in water is still little known. So, the aggregation behaviors of IR144 in water with steady‐state absorption spectroscopy and integrated polarization dependent femtosecond pump‐probe spectroscopy were investigated. Through comparing the absorption spectral bandshape of IR144 in water and in water pool of AOT reverse micelles, It is found that IR144 form dimer aggregates in water even at very low concentration (<1.0×10^?7 mol·L^?1). And the absorption spectrum of the IR144 aggregates always displays a bimodal feature, which is independent of the dye concentration ranging from 1.0×10^?7 to 1.0×10^?4 mol·L^?1. For better understanding the aggregation behaviors of IR144 in water, we measured the ground state recovery kinetics and the reorientation kinetics of IR144 in water and in water pool of AOT reverse micelles (W₀=[H₂O]/[AOT], W₀=40). It is found that the fluorescence quantum yield of IR144 in water is lower than that in water pool of AOT reverse micelles, and the reorientation time of IR144 in water is slower than that in water pool of AOT reverse micelles. Those kinetic measurements also verify that IR144 exists as dimer aggregates in water.     

Thermodynamic and FTIR studies of the interactions between sodium dodecyl sulphate and strong acids – atypical conductivity pattern

Micellisation of sodium dodecyl sulphate (SDS) was studied in the presence of hydrochloric acid (HCl) and perchloric acid (HClO₄) using conductometry method. The conductivity-[SDS] plots showed abnormal profile pattern at [HCl] > 0.002 mol dm^?3 and [HClO₄] > 0.001 mol dm^?3. Below these acid concentrations, conductivity pattern was normal, and the critical micelle concentration (CMC) values of SDS were lower in both acids than in water. At high acid concentrations, post-micellar slopes were negative. Fourier transform infrared (FTIR) analysis showed significant shifts in the bands suggesting the formation of dodecyl hydrogen sulphate by SDS at high acid concentrations. Thermodynamic parameters for SDS micellisation at low acid concentrations ([HCl] = 0.002 mol dm^?3 and [HClO₄] = 0.001 mol dm^?3) were determined in the temperature range 15–40°C. As temperature increases, the change in enthalpy and entropy of micellisation becomes less positive, and the change in free energy of micellisation becomes increasingly negative.     

Some 1-substituted quaternary imidazolium compounds and related polymers: Qualitative and quantitative infrared analysis

It was found that 1-substituted quaternary imidazolium compounds show some characteristic infrared (IR) activity. On quarternization of 1-substituted imidazoles strong absorption bands appeared at about 1150 and 1550 cm^?1 in the IR spectra of these compounds. The band at 1150 cm^?1 was assigned to the position 2 C?H bending mode and the 1550 cm^?1 band was attributed to a ring vibration mode of the quaternary imidazolium compounds. The concentration of the quaternary imidazolium units in a polymer can be determined by measuring the intensity of the absorption bands at 1150 or 1550 cm^?1 in relation to another suitable absorption band of the spectrum.     

The Polymerization and Oxidation of Pyrrole by Halogens in Organic Solvents

Simultaneous chemical polymerization and oxidation of pyrrole have been initiated by a halogenic electron acceptor, bromine or iodine, in various organic solvents. The polypyrrole (PPY)-halogen charge transfer (CT) complexes obtained from polymerization in acetonitrile are of particular interest. Both the PPY-I₂ and PPY-Br₂ CT complexes are granular in nature and have an electrical conductivity in the order of 1 to 10 ohm^?1 cm^?1. Both complexes show remarkable stability in the atmosphere and in the presence of moisture. The PPY-I₂ and PPY-Br₂ CT complexes in the form of thin, coarse films have also been synthesized on a SnO₂ electrode by electrochemical polymerization in acetonitrile. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared by the chemical methods are characterized by means of UV-visible and IR absorption spectroscopy, thermal and chemical analysis, and electrical conductivity and density measurements.     

IR spectra of long-chain α,ω-alkanediols: 1,22-docosanediol and 1,44-tetratetracontanediol

The IR absorption spectra of α,ω-alkanediols with different chain lengths, HO(CH₂)₂₂OH and HO(CH₂)₄₄OH, in the spectral range of 400–5000 cm^?1 are analyzed. The assignment of numerous absorption bands to vibration modes in short methylene sequences and terminal hydroxyl groups is suggested. The splitting of IR absorption bands into doublets at 720–730 cm^?1 (rocking vibrations of CH₂ groups) and 1463–1473 cm^?1 (bending vibrations of CH₂ groups) testifies that the crystal unit subcells in the lamellae of alkanediols are orthorhombic with parameters typical of normal hydrocarbons. The specific features of absorption bands due to O-H stretching and C-O-H bending vibrations have been analyzed. These bands appear during formation of lengthy associates from hydrogen bonds formed by hydroxyl groups on the surface of elementary lamellae. A sharp increase in the intensity of the absorption bands in progression of C-C stretching and CH₂ wagging vibrations due to the anharmonic Fermi resonance with the stretching vibrations of C-O groups in the terminal hydroxyl groups has been detected.     

The effect of solvent on the position of the first absorption band of nitrobenzene

The weak n → π* absorption band of nitrobenzene, which occurs in the region 25000–33000 cm^?1, has been measured in the gas phase, in perfluorohexane and in other solvents. The reported red-shift in this band in polar solvents is shown to be due to an increase in the underlying intensity of the π → π* bands whose first maximum is at 34750 cm^?1.     

Structure of Alkali Lignins Fractionated from Ricinus communis and Bagasse. 3. IR Spectra

Abstract

The lignin fractions isolated by one- and multistage soda and sulfate cookings showed almost identical IR spectra, indicating the similarity of the lignin skeletal structure throughout the plant. However, the absorbances reveal some differences. Similarity of the spectra includes: 1) chelation and bonding of the hydroxyl groups. 2) Stretching vibration of C-H bonds in methyl, methoxyl, and methylene groups. 3) Stretching vibration of C≡N. 4) Carbonyl unconjugated β-ketone, conjugated acids, or esters at 1725 cm^?1. There is no change in the intensity of absorption at this band from that at 1515 cm^?1 with the cooking stage. 5) Aromatic skeletal vibration at 1610 and 1515 cm^?1, affected by ring substituents at 1425 cm^?1. 6) The band at 1465 cm^?1 showed a higher intensity for soda and soluble kraft lignins than for insoluble kraft ones. 7) The band at 1370 cm^?1, assigned to phenolic OH bending, is affected by the methoxyl group. 8) The absence of condensed guaiacyl and the presence of syringyl and uncondensed guaiacyl. Assignments for hardwood lignin are shown for soda and soluble kraft lignins of bagasse, while those for softwood lignin are shown for soda, soluble, and insoluble kraft lignins of Ricinus communis and for insoluble kraft lignin of bagasse. A relation exists between the carbohydrate's lignin and the band at 920 cm^?1. Lignins from Ricinus communis are of higher guaiacyl to syringyl ratios than those from bagasse. The presence of C—S vibration and the absence of thiol groups for kraft lignins are indicated.     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

UV spectroscopy of monosubstituted derivatives of 1,2-dihydro-C60-fullerenes

UV spectroscopy is used to determine the molar absorption coefficients of C₆₀ fullerene and monosubstituted 1,2-dihydro-C₆₀-fullerenes in different solvents. It is found that the extinction coefficient of C₆₀ at 330 nm (the main absorption band most frequently used for qualitative and quantitative determination of the C₆₀ content) is independent of the nature of the solvent and is ～54400 M^?1·cm^?1. The molar absorption coefficients of a series of monosubstituted 1,2-dihydro-C₆₀-fullerenes are practically independent of the chemical structure and the length of the substituent and are 35700 M^?1·cm^?1 (λ ～ 328 nm) and 115250 M^?1·cm^?1 (λ ～ 257 nm). It is shown that the substitution in fullerene proceeds via the double 6,6 bond, as evidenced by the absorption band at 424 nm in the spectra of these compounds, which is characteristic of monosubstituted methanofullerenes.     

Specific solvent effects on the complexation of anions by ligands

From conductimetric measurements, the association constants K_A of chlorides and nitrates in acetonitrile and of bromides in both acetonitrile and nitrobenzene were determined in the presence of various amounts of benzoic acids. From these data it was possible to determine the values of the complexation constants k ₁ ^? between the ligands and the anions. In both solvents linear relationships exist between log k₁ and the Hammett σ parameters of the substituents. However, the values of both log k ₂ ^? for the unsubstituted benzoic acid and the correlation factors (η) are much lower in acetonitrile than in nitrobenzene. It is shown that this effect is due, to a large extent, to the complexation of the ligands by acetonitrile which competes with the ligandanion interaction. The η factors for the three anions lie in the order of their basicity in water.     

The Fermi doublet V2−V3 + V4 of CH3CN as a probe of molecular interactions

The Fermi doublet V₂?V₃ + V₄ of CH₃CN in basic, inert and acidic solvents has been studied by IR and Raman spectroscopy. The values of W, the Fermi coupling coefficient, obtained from IR spectra varies with the nature of the solvent while W evaluated from Raman data remains constant at 12.5 ± 0.5 cm^?1. The similar effects of Bronsted and Lewis acids on the band frequencies and intensities is evidence that the CN group complexes with acids via the N atom “n” electron pair and not the π bond.